Исходное сообщение
"Релиз ядра Linux 5.4" Отправлено RNZ, 26-Ноя-19 23:50
23:48 $ uname -r 5.3.0-23-generic 23:48 $ cat /etc/modprobe.d/it87.conf options it87 force_id=0x8622 23:48 $ sensors k10temp-pci-00c3 Adapter: PCI adapter Tdie:         +49.1°C  (high = +70.0°C) Tctl:         +49.1°C   acpitz-acpi-0 Adapter: ACPI interface temp1:        +16.8°C  (crit = +20.8°C) temp2:        +16.8°C  (crit = +20.8°C) amdgpu-pci-0900 Adapter: PCI adapter vddgfx:       +0.75 V   fan1:         697 RPM  (min =    0 RPM, max = 3200 RPM) edge:         +37.0°C  (crit = +94.0°C, hyst = -273.1°C) power1:        7.16 W  (cap = 145.00 W) it8622-isa-0a40 Adapter: ISA adapter in0:          +0.25 V  (min =  +0.00 V, max =  +3.06 V) in1:          +2.02 V  (min =  +0.00 V, max =  +3.06 V) in2:          +2.05 V  (min =  +0.00 V, max =  +3.06 V) in3:          +2.03 V  (min =  +0.00 V, max =  +3.06 V) in4:          +1.07 V  (min =  +0.00 V, max =  +3.06 V) in5:          +0.90 V  (min =  +0.00 V, max =  +3.06 V) in6:          +1.37 V  (min =  +0.00 V, max =  +3.06 V) 3VSB:         +3.29 V  (min =  +0.00 V, max =  +6.12 V) Vbat:         +3.24 V   fan1:         352 RPM  (min =    0 RPM) fan2:         610 RPM  (min =    0 RPM) fan3:         634 RPM  (min =    0 RPM) fan4:        1795 RPM  (min =    0 RPM) fan5:         453 RPM  (min =    0 RPM) temp1:        +34.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor temp2:        +41.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor temp3:        +40.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = disabled intrusion0:  OK

Ваше сообщение
Имя*:
EMail:	Для отправки ответов на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> 23:48 $ uname -r > 5.3.0-23-generic > 23:48 $ cat /etc/modprobe.d/it87.conf > options it87 force_id=0x8622 > 23:48 $ sensors > k10temp-pci-00c3 > Adapter: PCI adapter > Tdie: +49.1°C (high > = +70.0°C) > Tctl: +49.1°C > acpitz-acpi-0 > Adapter: ACPI interface > temp1: +16.8°C (crit = > +20.8°C) > temp2: +16.8°C (crit = > +20.8°C) > amdgpu-pci-0900 > Adapter: PCI adapter > vddgfx: +0.75 V > fan1: 697 RPM > (min = 0 RPM, max = 3200 RPM) > edge: +37.0°C (crit > = +94.0°C, hyst = -273.1°C) > power1: 7.16 W (cap > = 145.00 W) > it8622-isa-0a40 > Adapter: ISA adapter > in0: +0.25 V > (min = +0.00 V, max = +3.06 V) > in1: +2.02 V > (min = +0.00 V, max = +3.06 V) > in2: +2.05 V > (min = +0.00 V, max = +3.06 V) > in3: +2.03 V > (min = +0.00 V, max = +3.06 V) > in4: +1.07 V > (min = +0.00 V, max = +3.06 V) > in5: +0.90 V > (min = +0.00 V, max = +3.06 V) > in6: +1.37 V > (min = +0.00 V, max = +3.06 V) > 3VSB: +3.29 V > (min = +0.00 V, max = +6.12 V) > Vbat: +3.24 V > fan1: 352 RPM > (min = 0 RPM) > fan2: 610 RPM > (min = 0 RPM) > fan3: 634 RPM > (min = 0 RPM) > fan4: 1795 RPM (min > = 0 RPM) > fan5: 453 RPM > (min = 0 RPM) > temp1: +34.0°C (low > = +127.0°C, high = +127.0°C) sensor = thermistor > temp2: +41.0°C (low > = +127.0°C, high = +127.0°C) sensor = thermistor > temp3: +40.0°C (low > = +127.0°C, high = +127.0°C) sensor = disabled > intrusion0: OK
	Введите код, изображенный на картинке: