Исходное сообщение
"Автозагрузка mysql и apache в mops linux" Отправлено restyler, 09-Сен-09 08:16
История повторилась - теперь мускул грузится, а апач и самба нет, подозреваю что в скрипте rc.mysqld дело, значит запретил загрузку chmod 000 /etc/rc.d/rc.mysqld, перезагружаю машинку, апач и самба грузятся, вообщем выкладываю содержимое rc.mysqld: #!/bin/sh # Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB # This file is public domain and comes with NO WARRANTY of any kind # MySQL daemon start/stop script. # Usually this is put in /etc/init.d (at least on machines SYSV R4 based # systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql. # When this is done the mysql server will be started when the machine is # started and shut down when the systems goes down. # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 64 36 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start:  2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO # If you install MySQL on some other places than /usr/local/mysql, then you # have to do one of the following things for this script to work: # # - Run this script from within the MySQL installation directory # - Create a /etc/my.cnf file with the following information: #   [mysqld] #   basedir=<path-to-mysql-installation-directory> # - Add the above to any other configuration file (for example ~/.my.ini) #   and copy my_print_defaults to /usr/bin # - Add the path to the mysql-installation-directory to the basedir variable #   below. # # If you want to affect other MySQL variables, you should make your changes # in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files. # If you change base dir, you must also change datadir. These may get # overwritten by settings in the MySQL configuration files. basedir= datadir= # Default value, in seconds, afterwhich the script should timeout waiting # for server start. # Value here is overriden by value in my.cnf. # 0 means don't wait at all # Negative numbers mean to wait indefinitely service_startup_timeout=900 # The following variables are only set for letting mysql.server find things. # Set some defaults pid_file= server_pid_file= use_mysqld_safe=1 user=mysql if test -z "$basedir" then   basedir=/usr/local/mysql   bindir=/usr/local/mysql/bin   if test -z "$datadir"   then     datadir=/usr/local/mysql/var   fi   sbindir=/usr/local/mysql/sbin   libexecdir=/usr/local/mysql/libexec else   bindir="$basedir/bin"   if test -z "$datadir"   then     datadir="$basedir/data"   fi   sbindir="$basedir/sbin"   libexecdir="$basedir/libexec" fi # datadir_set is used to determine if datadir was set (and so should be # *not* set inside of the --basedir= handler.) datadir_set= # # Use LSB init script functions for printing messages, if possible # lsb_functions="/lib/lsb/init-functions" if test -f $lsb_functions ; then   . $lsb_functions else   log_success_msg()   {     echo " SUCCESS! $@"   }   log_failure_msg()   {     echo " ERROR! $@"   } fi PATH=/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin export PATH mode=$1    # start or stop shift other_args="$*"   # uncommon, but needed when called from an RPM upgrade action            # Expected: "--skip-networking --skip-grant-tables"            # They are not checked here, intentionally, as it is the resposibility            # of the "spec" file author to give correct arguments only. case `echo "testing\c"`,`echo -n testing` in     *c*,-n*) echo_n=   echo_c=     ;;     *c*,*)   echo_n=-n echo_c=     ;;     *)       echo_n=   echo_c='\c' ;; esac parse_server_arguments() {   for arg do     case "$arg" in       --basedir=*)  basedir=`echo "$arg" | sed -e 's/^[^=]*=//'`                     bindir="$basedir/bin"             if test -z "$datadir_set"; then               datadir="$basedir/data"             fi             sbindir="$basedir/sbin"             libexecdir="$basedir/libexec"         ;;       --datadir=*)  datadir=`echo "$arg" | sed -e 's/^[^=]*=//'`             datadir_set=1     ;;       --user=*)  user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;       --pid-file=*) server_pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;       --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;       --use-mysqld_safe) use_mysqld_safe=1;;       --use-manager)     use_mysqld_safe=0;;     esac   done } parse_manager_arguments() {   for arg do     case "$arg" in       --pid-file=*) pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;       --user=*)  user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;     esac   done } wait_for_pid () {   verb="$1"   manager_pid="$2"  # process ID of the program operating on the pid-file   i=0   avoid_race_condition="by checking again"   while test $i -ne $service_startup_timeout ; do     case "$verb" in       'created')         # wait for a PID-file to pop into existence.         test -s $pid_file && i='' && break         ;;       'removed')         # wait for this PID-file to disappear         test ! -s $pid_file && i='' && break         ;;       *)         echo "wait_for_pid () usage: wait_for_pid created|removed manager_pid"         exit 1         ;;     esac     # if manager isn't running, then pid-file will never be updated     if test -n "$manager_pid"; then       if kill -0 "$manager_pid" 2>/dev/null; then         :  # the manager still runs       else         # The manager may have exited between the last pid-file check and now.           if test -n "$avoid_race_condition"; then           avoid_race_condition=""           continue  # Check again.         fi         # there's nothing that will affect the file.         log_failure_msg "Manager of pid-file quit without updating file."         return 1  # not waiting any more.       fi     fi     echo $echo_n ".$echo_c"     i=`expr $i + 1`     sleep 1   done   if test -z "$i" ; then     log_success_msg     return 0   else     log_failure_msg     return 1   fi } # Get arguments from the my.cnf file, # the only group, which is read from now on is [mysqld] if test -x ./bin/my_print_defaults then   print_defaults="./bin/my_print_defaults" elif test -x $bindir/my_print_defaults then   print_defaults="$bindir/my_print_defaults" elif test -x $bindir/mysql_print_defaults then   print_defaults="$bindir/mysql_print_defaults" else   # Try to find basedir in /etc/my.cnf   conf=/etc/my.cnf   print_defaults=   if test -r $conf   then     subpat='^[^=]*basedir[^=]*=\(.*\)$'     dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf`     for d in $dirs     do       d=`echo $d | sed -e 's/[     ]//g'`       if test -x "$d/bin/my_print_defaults"       then         print_defaults="$d/bin/my_print_defaults"         break       fi       if test -x "$d/bin/mysql_print_defaults"       then         print_defaults="$d/bin/mysql_print_defaults"         break       fi     done   fi   # Hope it's in the PATH ... but I doubt it   test -z "$print_defaults" && print_defaults="my_print_defaults" fi # # Read defaults file from 'basedir'.   If there is no defaults file there # check if it's in the old (depricated) place (datadir) and read it from there # extra_args="" if test -r "$basedir/my.cnf" then   extra_args="-e $basedir/my.cnf" else   if test -r "$datadir/my.cnf"   then     extra_args="-e $datadir/my.cnf"   fi fi parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` # Look for the pidfile parse_manager_arguments `$print_defaults $extra_args manager` # # Set pid file if not given # if test -z "$pid_file" then   pid_file=$datadir/mysqlmanager-`/bin/hostname`.pid else   case "$pid_file" in     /* ) ;;     * )  pid_file="$datadir/$pid_file" ;;   esac fi if test -z "$server_pid_file" then   server_pid_file=$datadir/`/bin/hostname`.pid else   case "$server_pid_file" in     /* ) ;;     * )  server_pid_file="$datadir/$server_pid_file" ;;   esac fi case "$mode" in   'start')     # Start daemon     # Safeguard (relative paths, core dumps..)     cd $basedir     manager=$bindir/mysqlmanager     if test -x $libexecdir/mysqlmanager     then       manager=$libexecdir/mysqlmanager     elif test -x $sbindir/mysqlmanager     then       manager=$sbindir/mysqlmanager     fi     echo $echo_n "Starting MySQL"     if test -x $manager -a "$use_mysqld_safe" = "0"     then       if test -n "$other_args"       then         log_failure_msg "MySQL manager does not support options '$other_args'"         exit 1       fi       # Give extra arguments to mysqld with the my.cnf file. This script may       # be overwritten at next upgrade.       "$manager" \         --mysqld-safe-compatible \         --user="$user" \         --pid-file="$pid_file" >/dev/null 2>&1 &       wait_for_pid created $!; return_value=$?       # Make lock for RedHat / SuSE       if test -w /var/lock/subsys       then         touch /var/lock/subsys/mysqlmanager       fi       exit $return_value     elif test -x $bindir/mysqld_safe     then       # Give extra arguments to mysqld with the my.cnf file. This script       # may be overwritten at next upgrade.       pid_file=$server_pid_file       $bindir/mysqld_safe --datadir=$datadir --pid-file=$server_pid_file $other_args >/dev/null 2>&1 &       wait_for_pid created $!; return_value=$?       # Make lock for RedHat / SuSE       if test -w /var/lock/subsys       then         touch /var/lock/subsys/mysql       fi       exit $return_value     else       log_failure_msg "Couldn't find MySQL manager ($manager) or server ($bindir/mysqld_safe)"     fi     ;;   'stop')     # Stop daemon. We use a signal here to avoid having to know the     # root password.     # The RedHat / SuSE lock directory to remove     lock_dir=/var/lock/subsys/mysqlmanager     # If the manager pid_file doesn't exist, try the server's     if test ! -s "$pid_file"     then       pid_file=$server_pid_file       lock_dir=/var/lock/subsys/mysql     fi     if test -s "$pid_file"     then       mysqlmanager_pid=`cat $pid_file`       echo $echo_n "Shutting down MySQL"       kill $mysqlmanager_pid       # mysqlmanager should remove the pid_file when it exits, so wait for it.       wait_for_pid removed "$mysqlmanager_pid"; return_value=$?       # delete lock for RedHat / SuSE       if test -f $lock_dir       then         rm -f $lock_dir       fi       exit $return_value     else       log_failure_msg "MySQL manager or server PID file could not be found!"     fi     ;;   'restart')     # Stop the service and regardless of whether it was     # running or not, start it again.     if $0 stop  $other_args; then       $0 start $other_args     else       log_failure_msg "Failed to stop running server, so refusing to try to start."       exit 1     fi     ;;   'reload'|'force-reload')     if test -s "$server_pid_file" ; then       read mysqld_pid <  $server_pid_file       kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL"       touch $server_pid_file     else       log_failure_msg "MySQL PID file could not be found!"       exit 1     fi     ;;   'status')     # First, check to see if pid file exists     if test -s "$server_pid_file" ; then       read mysqld_pid < $server_pid_file       if kill -0 $mysqld_pid 2>/dev/null ; then         log_success_msg "MySQL running ($mysqld_pid)"         exit 0       else         log_failure_msg "MySQL is not running, but PID file exists"         exit 1       fi     else       # Try to find appropriate mysqld process       mysqld_pid=`pidof $libexecdir/mysqld`       if test -z $mysqld_pid ; then         if test "$use_mysqld_safe" = "0" ; then           lockfile=/var/lock/subsys/mysqlmanager         else           lockfile=/var/lock/subsys/mysql         fi         if test -f $lockfile ; then           log_failure_msg "MySQL is not running, but lock exists"           exit 2         fi         log_failure_msg "MySQL is not running"         exit 3       else         log_failure_msg "MySQL is running but PID file could not be found"         exit 4       fi     fi     ;;     *)       # usage       echo "Usage: $0  {start|stop|restart|reload|force-reload|status}  [ MySQL server options ]"       exit 1     ;; esac exit 0 В Конце exit 0 убирать пробовал, не катит. Посмотрите пожалуйста, где тут еще головняк. Заранее благодарю!

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> История повторилась - теперь мускул грузится, а апач и самба нет, подозреваю > что в скрипте rc.mysqld дело, значит запретил загрузку chmod 000 /etc/rc.d/rc.mysqld, > перезагружаю машинку, апач и самба грузятся, вообщем выкладываю содержимое rc.mysqld: > #!/bin/sh > # Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & > Detron HB > # This file is public domain and comes with NO WARRANTY of > any kind > # MySQL daemon start/stop script. > # Usually this is put in /etc/init.d (at least on machines SYSV > R4 based > # systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql. > # When this is done the mysql server will be started when > the machine is > # started and shut down when the systems goes down. > # Comments to support chkconfig on RedHat Linux > # chkconfig: 2345 64 36 > # description: A very fast and reliable SQL database engine. > # Comments to support LSB init script conventions > ### BEGIN INIT INFO > # Provides: mysql > # Required-Start: $local_fs $network $remote_fs > # Should-Start: ypbind nscd ldap ntpd xntpd > # Required-Stop: $local_fs $network $remote_fs > # Default-Start: 2 3 4 5 > # Default-Stop: 0 1 6 > # Short-Description: start and stop MySQL > # Description: MySQL is a very fast and reliable SQL database engine. > ### END INIT INFO > # If you install MySQL on some other places than /usr/local/mysql, then > you > # have to do one of the following things for this script > to work: > # > # - Run this script from within the MySQL installation directory > # - Create a /etc/my.cnf file with the following information: > # [mysqld] > # basedir=<path-to-mysql-installation-directory> > # - Add the above to any other configuration file (for example > ~/.my.ini) > # and copy my_print_defaults to /usr/bin > # - Add the path to the mysql-installation-directory to the basedir variable > # below. > # > # If you want to affect other MySQL variables, you should make > your changes > # in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files. > # If you change base dir, you must also change datadir. These > may get > # overwritten by settings in the MySQL configuration files. > basedir= > datadir= > # Default value, in seconds, afterwhich the script should timeout waiting > # for server start. > # Value here is overriden by value in my.cnf. > # 0 means don't wait at all > # Negative numbers mean to wait indefinitely > service_startup_timeout=900 > # The following variables are only set for letting mysql.server find things. > # Set some defaults > pid_file= > server_pid_file= > use_mysqld_safe=1 > user=mysql > if test -z "$basedir" > then > basedir=/usr/local/mysql > bindir=/usr/local/mysql/bin > if test -z "$datadir" > then > datadir=/usr/local/mysql/var > fi > sbindir=/usr/local/mysql/sbin > libexecdir=/usr/local/mysql/libexec > else > bindir="$basedir/bin" > if test -z "$datadir" > then > datadir="$basedir/data" > fi > sbindir="$basedir/sbin" > libexecdir="$basedir/libexec" > fi > # datadir_set is used to determine if datadir was set (and so > should be > # *not* set inside of the --basedir= handler.) > datadir_set= > # > # Use LSB init script functions for printing messages, if possible > # > lsb_functions="/lib/lsb/init-functions" > if test -f $lsb_functions ; then > . $lsb_functions > else > log_success_msg() > { > echo " SUCCESS! $@" > } > log_failure_msg() > { > echo " ERROR! $@" > } > fi > PATH=/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin > export PATH > mode=$1 # start or stop > shift > other_args="$*" # uncommon, but needed when called from an RPM > upgrade action > # > Expected: "--skip-networking --skip-grant-tables" > # > They are not checked here, intentionally, as it is the resposibility > # > of the "spec" file author to give correct arguments only. > case `echo "testing\c"`,`echo -n testing` in > *c*,-n*) echo_n= echo_c= > ;; > *c*,*) echo_n=-n echo_c= > ;; > *) echo_n= > echo_c='\c' ;; > esac > parse_server_arguments() { > for arg do > case "$arg" in > --basedir=*) basedir=`echo "$arg" | sed > -e 's/^[^=]*=//'` > > bindir="$basedir/bin" > if test -z "$datadir_set"; then > datadir="$basedir/data" > fi > sbindir="$basedir/sbin" > libexecdir="$basedir/libexec" > ;; > --datadir=*) datadir=`echo "$arg" | sed > -e 's/^[^=]*=//'` > datadir_set=1 > ;; > --user=*) user=`echo "$arg" | sed > -e 's/^[^=]*=//'` ;; > --pid-file=*) server_pid_file=`echo "$arg" | sed -e > 's/^[^=]*=//'` ;; > --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e > 's/^[^=]*=//'` ;; > --use-mysqld_safe) use_mysqld_safe=1;; > --use-manager) use_mysqld_safe=0;; > esac > done > } > parse_manager_arguments() { > for arg do > case "$arg" in > --pid-file=*) pid_file=`echo "$arg" | sed -e > 's/^[^=]*=//'` ;; > --user=*) user=`echo "$arg" | sed > -e 's/^[^=]*=//'` ;; > esac > done > } > wait_for_pid () { > verb="$1" > manager_pid="$2" # process ID of the program operating on > the pid-file > i=0 > avoid_race_condition="by checking again" > while test $i -ne $service_startup_timeout ; do > case "$verb" in > 'created') > # wait for a > PID-file to pop into existence. > test -s $pid_file && > i='' && break > ;; > 'removed') > # wait for this > PID-file to disappear > test ! -s $pid_file > && i='' && break > ;; > *) > echo "wait_for_pid () usage: > wait_for_pid created|removed manager_pid" > exit 1 > ;; > esac > # if manager isn't running, then pid-file will > never be updated > if test -n "$manager_pid"; then > if kill -0 "$manager_pid" 2>/dev/null; then > : # the > manager still runs > else > # The manager may > have exited between the last pid-file check and now. > if test -n "$avoid_race_condition"; > then > avoid_race_condition="" > continue > # Check again. > fi > # there's nothing that > will affect the file. > log_failure_msg "Manager of pid-file > quit without updating file." > return 1 # > not waiting any more. > fi > fi > echo $echo_n ".$echo_c" > i=`expr $i + 1` > sleep 1 > done > if test -z "$i" ; then > log_success_msg > return 0 > else > log_failure_msg > return 1 > fi > } > # Get arguments from the my.cnf file, > # the only group, which is read from now on is [mysqld] > if test -x ./bin/my_print_defaults > then > print_defaults="./bin/my_print_defaults" > elif test -x $bindir/my_print_defaults > then > print_defaults="$bindir/my_print_defaults" > elif test -x $bindir/mysql_print_defaults > then > print_defaults="$bindir/mysql_print_defaults" > else > # Try to find basedir in /etc/my.cnf > conf=/etc/my.cnf > print_defaults= > if test -r $conf > then > subpat='^[^=]*basedir[^=]*=\(.*\)$' > dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf` > for d in $dirs > do > d=`echo $d | sed -e 's/[ > ]//g'` > if test -x "$d/bin/my_print_defaults" > then > print_defaults="$d/bin/my_print_defaults" > break > fi > if test -x "$d/bin/mysql_print_defaults" > then > print_defaults="$d/bin/mysql_print_defaults" > break > fi > done > fi > # Hope it's in the PATH ... but I doubt > it > test -z "$print_defaults" && print_defaults="my_print_defaults" > fi > # > # Read defaults file from 'basedir'. If there is no > defaults file there > # check if it's in the old (depricated) place (datadir) and read > it from there > # > extra_args="" > if test -r "$basedir/my.cnf" > then > extra_args="-e $basedir/my.cnf" > else > if test -r "$datadir/my.cnf" > then > extra_args="-e $datadir/my.cnf" > fi > fi > parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` > # Look for the pidfile > parse_manager_arguments `$print_defaults $extra_args manager` > # > # Set pid file if not given > # > if test -z "$pid_file" > then > pid_file=$datadir/mysqlmanager-`/bin/hostname`.pid > else > case "$pid_file" in > /* ) ;; > * ) pid_file="$datadir/$pid_file" ;; > esac > fi > if test -z "$server_pid_file" > then > server_pid_file=$datadir/`/bin/hostname`.pid > else > case "$server_pid_file" in > /* ) ;; > * ) server_pid_file="$datadir/$server_pid_file" ;; > esac > fi > case "$mode" in > 'start') > # Start daemon > # Safeguard (relative paths, core dumps..) > cd $basedir > manager=$bindir/mysqlmanager > if test -x $libexecdir/mysqlmanager > then > manager=$libexecdir/mysqlmanager > elif test -x $sbindir/mysqlmanager > then > manager=$sbindir/mysqlmanager > fi > echo $echo_n "Starting MySQL" > if test -x $manager -a "$use_mysqld_safe" = "0" > then > if test -n "$other_args" > then > log_failure_msg "MySQL manager does > not support options '$other_args'" > exit 1 > fi > # Give extra arguments to mysqld > with the my.cnf file. This script may > # be overwritten at next upgrade. > "$manager" \ > --mysqld-safe-compatible \ > --user="$user" \ > --pid-file="$pid_file" >/dev/null 2>&1 & > wait_for_pid created $!; return_value=$? > # Make lock for RedHat / > SuSE > if test -w /var/lock/subsys > then > touch /var/lock/subsys/mysqlmanager > fi > exit $return_value > elif test -x $bindir/mysqld_safe > then > # Give extra arguments to mysqld > with the my.cnf file. This script > # may be overwritten at next > upgrade. > pid_file=$server_pid_file > $bindir/mysqld_safe --datadir=$datadir --pid-file=$server_pid_file $other_args >/dev/null > 2>&1 & > wait_for_pid created $!; return_value=$? > # Make lock for RedHat / > SuSE > if test -w /var/lock/subsys > then > touch /var/lock/subsys/mysql > fi > exit $return_value > else > log_failure_msg "Couldn't find MySQL manager ($manager) > or server ($bindir/mysqld_safe)" > fi > ;; > 'stop') > # Stop daemon. We use a signal here > to avoid having to know the > # root password. > # The RedHat / SuSE lock directory to > remove > lock_dir=/var/lock/subsys/mysqlmanager > # If the manager pid_file doesn't exist, try > the server's > if test ! -s "$pid_file" > then > pid_file=$server_pid_file > lock_dir=/var/lock/subsys/mysql > fi > if test -s "$pid_file" > then > mysqlmanager_pid=`cat $pid_file` > echo $echo_n "Shutting down MySQL" > kill $mysqlmanager_pid > # mysqlmanager should remove the pid_file > when it exits, so wait for it. > wait_for_pid removed "$mysqlmanager_pid"; return_value=$? > # delete lock for RedHat / > SuSE > if test -f $lock_dir > then > rm -f $lock_dir > fi > exit $return_value > else > log_failure_msg "MySQL manager or server PID > file could not be found!" > fi > ;; > 'restart') > # Stop the service and regardless of whether > it was > # running or not, start it again. > if $0 stop $other_args; then > $0 start $other_args > else > log_failure_msg "Failed to stop running server, > so refusing to try to start." > exit 1 > fi > ;; > 'reload'|'force-reload') > if test -s "$server_pid_file" ; then > read mysqld_pid < $server_pid_file > kill -HUP $mysqld_pid && log_success_msg "Reloading > service MySQL" > touch $server_pid_file > else > log_failure_msg "MySQL PID file could not > be found!" > exit 1 > fi > ;; > 'status') > # First, check to see if pid file > exists > if test -s "$server_pid_file" ; then > read mysqld_pid < $server_pid_file > if kill -0 $mysqld_pid 2>/dev/null ; > then > log_success_msg "MySQL running ($mysqld_pid)" > exit 0 > else > log_failure_msg "MySQL is not > running, but PID file exists" > exit 1 > fi > else > # Try to find appropriate mysqld > process > mysqld_pid=`pidof $libexecdir/mysqld` > if test -z $mysqld_pid ; then > if test "$use_mysqld_safe" = > "0" ; then > lockfile=/var/lock/subsys/mysqlmanager > else > lockfile=/var/lock/subsys/mysql > fi > if test -f $lockfile > ; then > log_failure_msg "MySQL > is not running, but lock exists" > exit 2 > fi > log_failure_msg "MySQL is not > running" > exit 3 > else > log_failure_msg "MySQL is running > but PID file could not be found" > exit 4 > fi > fi > ;; > *) > # usage > echo "Usage: $0 {start|stop|restart|reload|force-reload|status} > [ MySQL server options ]" > exit 1 > ;; > esac > exit 0 > В Конце exit 0 убирать пробовал, не катит. Посмотрите пожалуйста, где тут > еще головняк. > Заранее благодарю!
	Введите код, изображенный на картинке: