This section is written by Dr. Tilmann Bubeck, firstname.lastname@example.org
I tried hard to install a laptop through PLIP with a RedHat 6.2 but the installer from RedHat is buggy and could not be used for PLIP. I verified that it was already broken in RedHat 6.1, but works in RedHat 5.2 as desired. Patches have been sent to RedHat and will hopefully be applied to the upcoming RedHat 7.0.
So if you want to install a RedHat 6.x over PLIP you must follow these instructions.
The problem is the "bootnet" disk. This disk should be used for PLIP installation but has 2 serious errors:
Probably the easiest way to solve the above problem is to use a fixed "bootnet" disk. You can get a fixed "bootnet" disk for RedHat 6.2 from http://www-ti.informatik.uni-tuebingen.de/~bubeck/bootnet-plip-62.img
Use the following command to copy the downloaded image to an empty disk:
dd if=bootnet-plip-62.img of=/dev/fd0.
Then insert the disk and turn your computer on. When you come to the point where you must choose your network device driver please do:
If the above bootnet disk is not suitable for your needs, I will present a small description of how to transform a standard bootnet disk for using "plip". This description is quite short and is addressed to the advanced user.
mount /dev/fd0 /mnt
cp /mnt/initrd.img /tmp/initrd.img.gz; gunzip /tmp/initrd.img.gz
mkdir /mnt2; mount -o loop /tmp/initrd.img /mnt2
cd /tmp; zcat /mnt2/modules/modules.cgz | cpio -ivd
cp .../parport_pc.o /tmp/2.2.14-5.0BOOT.
rm /tmp/2.2.14-5.0BOOT/sktr.o(driver for token ring network adapter).
find /tmp/2.2.14-5.0BOOT | cpio -ov -H crc | gzip > /mnt2/modules/modules.cgz
echo "parport_pc: parport" >> /mnt2/modules/modules.dep
parport_pc plip "Parallel Port Module for PC" io "Base I/O address" irq "IRQ level"
umount /mnt2; gzip -9 /tmp/initrd.img
cp /tmp/initrd.img.gz /mnt/initrd.img; umount /mnt
By following these instructions, you get a bootnet disk containing all necessary modules and therefore allowing for a PLIP installation. Please follow the instructions elsewhere in this how-to on how to do the installation with the new disk.
Закладки на сайте
Проследить за страницей
Created 1996-2023 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру