If you are using dynamic IP numbers (and many service providers will only give you a dynamic IP number unless you pay significantly more for your connection), then you have to recognize the limitations this imposes.
First of all, outbound service requests will work just fine. That is, you can send email using sendmail (provided you have correctly set up sendmail), ftp files from remote sites, finger users on other machines, browse the web etc.
In particular, you can answer email that you have brought down to your machine whilst you are off line. Mail will simply sit in your mail queue until you dial back into your ISP.
However, your machine is NOT connected to the Internet 24 hours a day, nor does it have the same IP number every time it is connected. So it is impossible for you to receive email directed to your machine, and very difficult to set up a web or ftp server that your friends can access! As far as the Internet is concerned your machine does not exist as a unique, permanently contactable machine as it does not have a unique IP number (remember - other machines will be using the IP number when they are allocated it on dial-in).
If you set up a WWW, (or any other server), it is totally unknown by any user on the Internet UNLESS they know that your machine is connected AND its actual (current) IP number. There are a number of ways they can get this info, ranging from you ringing them, sending them email to tell them or cunning use of ".plan" files on a shell account at your service provider (assuming that your provider allows shell and finger access).
Now, for most users, this is not a problem - all that most people want is to send and receive email (using your account on your service provider) and make outbound connections to WWW, ftp and other servers on the Internet. If you MUST have inbound connections to your server, you should really get a static IP number. Alternatively you can explore the methods hinted at above...
Even for dynamic IP numbers, you can certainly configure sendmail on your machine to send out any email that you compose locally. Configuration of sendmail can be obscure and difficult - so this document does not attempt to tell you how to do this. However, you should probably configure sendmail so that your Internet service provider is designated as your "smart relay" host (the sendmail.cf DS option). (For more sendmail configuration info, see the sendmail documents - and look at the m4 configurations that come with sendmail. There is almost certain to be one there that will meet your needs).
There are also excellent books on Sendmail (notably the 'bible' from O'Reilly and Associates), but these are almost certainly overkill for most users!
Once you have sendmail configured, you will probably want to have sendmail dispatch any messages that have been sitting in the outbound mail queue as soon as the PPP connection comes up. To do this, add the command
sendmail -q &
to your /etc/ppp/ip-up script (see below).
Inbound email is a problem for dynamic IP numbers. The way to handle this is to:-
configure your mail user agent so that all mail is sent out with a "reply to" header giving your email address at your Internet Service provider. If you can, you should also set your FROM address to be your email address at your ISP as well.
use the popclient, fetchmail programs to retrieve your email from your service provider. Alternatively, if your ISP is using IMAP, use an IMAP enabled mail user agent, (such as pine).
You can automate this process at dial up time by putting the necessary commands in the /etc/ppp/ip-up script (see below).
|Why can't people finger, WWW, gopher, talk, etc. to my machine?||Setting Up a local Name server|
Закладки на сайте
Проследить за страницей
Created 1996-2023 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру