The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Поиск:  Каталог документации

2. Quick Start

The quickest way to get started is simply to use the setup tools provided by your vendor. Assuming that this includes support for your driver, and assuming that your vendor shipped the driver for your printer, then it should be easy to get a basic setup going this way. For information on vendor-provided setup tools, see Section 9.

If your vendor's tool doesn't work out, you should figure out if your printer is supposed to work at all. Consult the printer compatibility listings in Section 5.3.1 as well as the online version described there.

If your printer is known to work with a driver, check that you have that driver, and install if it not. Typically you will be able to find a contributed Ghostscript package including newer Ghostscript code and assorted third-party drivers. If not, you can compile it yourself; the process is not trivial, but it is well documented. See Section 10 for more information on Ghostscript.

After installing the proper driver, attempt again to configure your printer with your vendor's tools. If that fails, select a suitable third party tool from those described in Section 8. If that also fails, you'll need to construct your own setup; again see Section 8.

If you're still stuck, you've got a little troubleshooting to do. It's probably best to read most of this document first to get a feel for how things are supposed to work; then you'll be in a better position to debug.




Спонсоры:
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2021 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру