It is assumed that the server is a Linux system with either:
a modem attached to a /dev/ttySx device
an 'isdn4linux'-emulated modem mapped to a /dev/ttyIx device
The easiest setup I can think of uses a five lines perl script to implement a modem daemon in /usr/sbin/modemd:
#!/usr/bin/perl select((select(STDOUT), $| = 1)[$); select((select(STDIN), $| = 1)[$); exec 'cu -s 115200 -l /dev/ttyS1'; die '$0: Cant exec cu: $!\n';
The modem daemon is started by the inetd process if a client connects to the appropriate port as described below. The modemd simply connects the socket handle with STDIN and STDOUT of the cu command and lets cu handle the actual modem device.
The existence of the modem daemon must be made known to the inetd process by updating its configuration file, usually /etc/inetd.conf like:
# # modem daemon # modem stream tcp nowait root /usr/sbin/tcpd /usr/sbin/modemd /dev/ttyS1
In order to make this work, an entry to /etc/services needs to be added like:
modem 2006/tcp modemd
This associates a symbolic name with an explicit port, 2006 in the example. The portnumber could be any number not already assigned to an existing service. After these changes have been made, a signal must be sent to the inetd process in order to let inetd re-read and process its configuration file:
bash# ps | grep inetd 194 ? S 0:00 /usr/sbin/inetd bash# kill -HUP 194
Now the server side is ready to accept requests from clients. The correct function can be verified by:
bash$ telnet localhost modem Trying 127.0.0.1... Connected to localhost. Escape character is '^]'.
You are now connected to the modem. You can now issue AT commands in order to verify the setup:
atz atz OK ati1 ati1 Linux ISDN OK ^] telnet>quit bash$
Instead of using the Perl script as a modem server, there is also a program named Masqdialer available at http://w3.cpwright.com/mserver/.
With Masqdialer you can export any number of modems connected to your server to any host that can connect the server via TCP/IP on a given port with a binary data stream.
Before compiling check config.h for compile time options:
set the path for the config file to your liking
set the path for the lock file to your liking
Do make all.
Copy the binaries (mserver and tcpconn) into a suitable directory such as /usr/local/sbin/. Copy mserver.conf into the path that you specified in config.h.
Masqdialer could be started from one of your system startup scripts. A simple /usr/local/sbin/mserver will run it as a daemon.
A line in mserver.conf could look like this:
5800 /dev/ttyS1 115200,8,N,1 *.foo.org,192.168.2.1
which would mean that a modem connected to /dev/ttyS1 can be connected via port 5800 from anywhere in the domain foo.org and from host 192.168.2.1. Any other hosts are rejected. Pitfall: If you don't specify hosts then ANY host will be allowed to connect. The serial line settings are fixed and cannot be changed from the client side. You can export several modems on a single port. Masqdialer only locks the modem devices by use of UUCP style lock files when they are actually in use thus allowing other programs to take advantage of them.
Закладки на сайте
Проследить за страницей
Created 1996-2019 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру