The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации

Next Previous Contents

3. The procedure

3.1 Removing the Kernel Sources

The kernel sources take up more than 20 Mb, and you may want to remove them. If so, I suggest that you compile a new kernel that is tailored to your machine once and for all, then get rid of the sources. Take care, though.

I don't recommend that you remove the kernel sources unless you are sure that your machine is properly configured. Besides, you need the kernel #includes to compile C programs. Think twice!

If you do decide so, do not remove the include/linux tree unless you know you'll never compile applications on your machine.

3.2 Pruning Out Applications

Now, decide which applications you really need. Some may prove redundant: for instance, are you sure you can't live without emacs? You could use jed instead.

It's up to you to decide what you want to keep. Some general points:

3.3 Stripping Binaries

Let's start reducing the size of binaries. Move to /usr/bin and issue the command

machine:/usr/bin# strip *

which will do away with symbols embedded in binaries. Repeat this step in /usr/X11R6/bin/ and other directories containing executables you may have (don't forget to locate TeX's and gcc's binaries), but do not run it under /sbin, /bin, or /usr/sbin/ if you value your installation!

3.4 Compressing with upx

First, install upx and read its documentation. Then go to /usr/bin and run it with the command upx *; it will compress all executables, including suid ones (tcx wouldn't). Repeat this step in other directories as seen above.

Remember to compress the executables whenever you install a new package!

3.5 Gzipping around

There are lots of other files that can be compressed once and for all. Let's start with /usr/doc/; move to this directory and issue the command

machine:/usr/doc# find . -type f -exec gzip -9 {} \; 2> /dev/null

Remember to compress the docs whenever you install a new package!

Repeat this step in the directory containing the documentation for TeX (on my system, /usr/lib/texmf/texmf/doc/. If you're really sure, remove these directories altogether.

Now, install zlibc and compile it. If your system is like mine, the compilation process will abort complaining about a missing (static) libc. Never mind; you'll find a file called uncompress.o that is what's needed. Move it to /usr/local/lib/ and add this line to your /etc/profile:

export LD_ELF_PRELOAD=/usr/local/lib/uncompress.o

Now, you can compress with gzip not only documentation, but also data files: the applications that use them will be able to use them nonetheless. In theory, the trick should work with most applications, but in practice your degree of success may vary. Mine was rather unimpressive.


Next Previous Contents


Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру