Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Sat Feb 3 10:31:49 2024 -0800
af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.
[ Upstream commit 1279f9d9dec2d7462823a18c29ad61359e0a007d ]
syzbot reported a warning [0] in __unix_gc() with a repro, which
creates a socketpair and sends one socket's fd to itself using the
peer.
socketpair(AF_UNIX, SOCK_STREAM, 0, [3, 4]) = 0
sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="\360", iov_len=1}],
msg_iovlen=1, msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET,
cmsg_type=SCM_RIGHTS, cmsg_data=[3]}],
msg_controllen=24, msg_flags=0}, MSG_OOB|MSG_PROBE|MSG_DONTWAIT|MSG_ZEROCOPY) = 1
This forms a self-cyclic reference that GC should finally untangle
but does not due to lack of MSG_OOB handling, resulting in memory
leak.
Recently, commit 11498715f266 ("af_unix: Remove io_uring code for
GC.") removed io_uring's dead code in GC and revealed the problem.
The code was executed at the final stage of GC and unconditionally
moved all GC candidates from gc_candidates to gc_inflight_list.
That papered over the reported problem by always making the following
WARN_ON_ONCE(!list_empty(&gc_candidates)) false.
The problem has been there since commit 2aab4b969002 ("af_unix: fix
struct pid leaks in OOB support") added full scm support for MSG_OOB
while fixing another bug.
To fix this problem, we must call kfree_skb() for unix_sk(sk)->oob_skb
if the socket still exists in gc_candidates after purging collected skb.
Then, we need to set NULL to oob_skb before calling kfree_skb() because
it calls last fput() and triggers unix_release_sock(), where we call
duplicate kfree_skb(u->oob_skb) if not NULL.
Note that the leaked socket remained being linked to a global list, so
kmemleak also could not detect it. We need to check /proc/net/protocol
to notice the unfreed socket.
[0]:
WARNING: CPU: 0 PID: 2863 at net/unix/garbage.c:345 __unix_gc+0xc74/0xe80 net/unix/garbage.c:345
Modules linked in:
CPU: 0 PID: 2863 Comm: kworker/u4:11 Not tainted 6.8.0-rc1-syzkaller-00583-g1701940b1a02 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: events_unbound __unix_gc
RIP: 0010:__unix_gc+0xc74/0xe80 net/unix/garbage.c:345
Code: 8b 5c 24 50 e9 86 f8 ff ff e8 f8 e4 22 f8 31 d2 48 c7 c6 30 6a 69 89 4c 89 ef e8 97 ef ff ff e9 80 f9 ff ff e8 dd e4 22 f8 90 <0f> 0b 90 e9 7b fd ff ff 48 89 df e8 5c e7 7c f8 e9 d3 f8 ff ff e8
RSP: 0018:ffffc9000b03fba0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc9000b03fc10 RCX: ffffffff816c493e
RDX: ffff88802c02d940 RSI: ffffffff896982f3 RDI: ffffc9000b03fb30
RBP: ffffc9000b03fce0 R08: 0000000000000001 R09: fffff52001607f66
R10: 0000000000000003 R11: 0000000000000002 R12: dffffc0000000000
R13: ffffc9000b03fc10 R14: ffffc9000b03fc10 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005559c8677a60 CR3: 000000000d57a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
process_one_work+0x889/0x15e0 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x8b9/0x12a0 kernel/workqueue.c:2787
kthread+0x2c6/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
</TASK>
Reported-by: syzbot+fa3ef895554bdbfd1183@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fa3ef895554bdbfd1183
Fixes: 2aab4b969002 ("af_unix: fix struct pid leaks in OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240203183149.63573-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Julian Sikorski <belegdol+github@gmail.com>
Date: Tue Jan 23 09:49:35 2024 +0100
ALSA: usb-audio: Add a quirk for Yamaha YIT-W12TX transmitter
commit a969210066054ea109d8b7aff29a9b1c98776841 upstream.
The device fails to initialize otherwise, giving the following error:
[ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240123084935.2745-1-belegdol+github@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexander Tsoy <alexander@tsoy.me>
Date: Wed Jan 24 16:02:39 2024 +0300
ALSA: usb-audio: Add delay quirk for MOTU M Series 2nd revision
commit d915a6850e27efb383cd4400caadfe47792623df upstream.
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240124130239.358298-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Young <sean@mess.org>
Date: Wed Jan 24 15:15:24 2024 +0000
ALSA: usb-audio: add quirk for RODE NT-USB+
commit 7822baa844a87cbb93308c1032c3d47d4079bb8a upstream.
The RODE NT-USB+ is marketed as a professional usb microphone, however the
usb audio interface is a mess:
[ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[ 1.503912] usb 1-5: config 1 has no interface number 4
[ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.519697] usb 1-5: Product: RØDE NT-USB+
[ 1.519699] usb 1-5: Manufacturer: RØDE
[ 1.519700] usb 1-5: SerialNumber: 1D773A1A
[ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2
Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get.
I have asked Rode support to fix it, but they show no interest.
Signed-off-by: Sean Young <sean@mess.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240124151524.23314-1-sean@mess.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Wed Jan 24 16:53:07 2024 +0100
ALSA: usb-audio: Sort quirk table entries
commit 668abe6dc7b61941fa5c724c06797efb0b87f070 upstream.
The quirk table entries should be put in the USB ID order, but some
entries have been put in random places. Re-sort them.
Fixes: bf990c102319 ("ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue")
Fixes: fd28941cff1c ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless")
Fixes: dfd5fe19db7d ("ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless")
Fixes: 4a63e68a2951 ("ALSA: usb-audio: Fix microphone sound on Nexigo webcam.")
Fixes: 7822baa844a8 ("ALSA: usb-audio: add quirk for RODE NT-USB+")
Fixes: 4fb7c24f69c4 ("ALSA: usb-audio: Add quirk for Fiero SC-01")
Fixes: 2307a0e1ca0b ("ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)")
Link: https://lore.kernel.org/r/20240124155307.16996-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhipeng Lu <alexious@zju.edu.cn>
Date: Thu Feb 1 20:41:05 2024 +0800
atm: idt77252: fix a memleak in open_card_ubr0
[ Upstream commit f3616173bf9be9bf39d131b120d6eea4e6324cb5 ]
When alloc_scq fails, card->vcs[0] (i.e. vc) should be freed. Otherwise,
in the following call chain:
idt77252_init_one
|-> idt77252_dev_open
|-> open_card_ubr0
|-> alloc_scq [failed]
|-> deinit_card
|-> vfree(card->vcs);
card->vcs is freed and card->vcs[0] is leaked.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tejun Heo <tj@kernel.org>
Date: Mon Nov 20 12:25:56 2023 -1000
blk-iocost: Fix an UBSAN shift-out-of-bounds warning
[ Upstream commit 2a427b49d02995ea4a6ff93a1432c40fa4d36821 ]
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Reported-by: Breno Leitão <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis")
Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shyam Prasad N <sprasad@microsoft.com>
Date: Thu Feb 1 11:15:26 2024 +0000
cifs: avoid redundant calls to disable multichannel
[ Upstream commit e77e15fa5eb1c830597c5ca53ea7af973bae2f78 ]
When the server reports query network interface info call
as unsupported following a tree connect, it means that
multichannel is unsupported, even if the server capabilities
report otherwise.
When this happens, cifs_chan_skip_or_disable is called to
disable multichannel on the client. However, we only need
to call this when multichannel is currently setup.
Fixes: f591062bdbf4 ("cifs: handle servers that still advertise multichannel after disabling")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shyam Prasad N <sprasad@microsoft.com>
Date: Thu Feb 1 11:15:29 2024 +0000
cifs: failure to add channel on iface should bump up weight
[ Upstream commit 6aac002bcfd554aff6d3ebb55e1660d078d70ab0 ]
After the interface selection policy change to do a weighted
round robin, each iface maintains a weight_fulfilled. When the
weight_fulfilled reaches the total weight for the iface, we know
that the weights can be reset and ifaces can be allocated from
scratch again.
During channel allocation failures on a particular channel,
weight_fulfilled is not incremented. If a few interfaces are
inactive, we could end up in a situation where the active
interfaces are all allocated for the total_weight, and inactive
ones are all that remain. This can cause a situation where
no more channels can be allocated further.
This change fixes it by increasing weight_fulfilled, even when
channel allocation failure happens. This could mean that if
there are temporary failures in channel allocation, the iface
weights may not strictly be adhered to. But that's still okay.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Frank Li <Frank.Li@nxp.com>
Date: Tue Jan 23 12:28:41 2024 -0500
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
[ Upstream commit a22fe1d6dec7e98535b97249fdc95c2be79120bb ]
is_slave_direction() should return true when direction is DMA_DEV_TO_DEV.
Fixes: 49920bc66984 ("dmaengine: add new enum dma_transfer_direction")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240123172842.3764529-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guanhua Gao <guanhua.gao@nxp.com>
Date: Thu Jan 18 11:29:16 2024 -0500
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
[ Upstream commit b73e43dcd7a8be26880ef8ff336053b29e79dbc5 ]
In case of long format of qDMA command descriptor, there are one frame
descriptor, three entries in the frame list and two data entries. So the
size of dma_pool_create for these three fields should be the same with
the total size of entries respectively, or the contents may be overwritten
by the next allocated descriptor.
Fixes: 7fdf9b05c73b ("dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs")
Signed-off-by: Guanhua Gao <guanhua.gao@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240118162917.2951450-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sun Jan 7 11:02:04 2024 +0100
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
[ Upstream commit 3aa58cb51318e329d203857f7a191678e60bb714 ]
This dma_alloc_coherent() is undone neither in the remove function, nor in
the error handling path of fsl_qdma_probe().
Switch to the managed version to fix both issues.
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7f66aa14f59d32b13672dde28602b47deb294e1f.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sun Jan 7 11:02:03 2024 +0100
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
[ Upstream commit 968bc1d7203d384e72afe34124a1801b7af76514 ]
This dma_alloc_coherent() is undone in the remove function, but not in the
error handling path of fsl_qdma_probe().
Switch to the managed version to fix the issue in the probe and simplify
the remove function.
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a0ef5d0f5a47381617ef339df776ddc68ce48173.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jai Luthra <j-luthra@ti.com>
Date: Wed Jan 3 14:37:55 2024 +0530
dmaengine: ti: k3-udma: Report short packet errors
[ Upstream commit bc9847c9ba134cfe3398011e343dcf6588c1c902 ]
Propagate the TR response status to the device using BCDMA
split-channels. For example CSI-RX driver should be able to check if a
frame was not transferred completely (short packet) and needs to be
discarded.
Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240103-tr_resp_err-v1-1-2fdf6d48ab92@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Date: Wed Jan 31 08:49:41 2024 +0530
drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'
[ Upstream commit 66951d98d9bf45ba25acf37fe0747253fafdf298 ]
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;"
pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to
ensure the tg is not NULL.
Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Date: Sat Jan 27 18:34:01 2024 +0530
drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'
[ Upstream commit e96fddb32931d007db12b1fce9b5e8e4c080401b ]
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Date: Wed Feb 7 10:20:57 2024 +0530
drm/amd/display: Implement bounds check for stream encoder creation in DCN301
[ Upstream commit 58fca355ad37dcb5f785d9095db5f748b79c5dc2 ]
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Fri Jan 26 11:41:47 2024 +0300
drm/i915/gvt: Fix uninitialized variable in handle_mmio()
[ Upstream commit 47caa96478b99d6d1199b89467cc3e5a6cc754ee ]
This code prints the wrong variable in the warning message. It should
print "i" instead of "info->offset". On the first iteration "info" is
uninitialized leading to a crash and on subsequent iterations it prints
the previous offset instead of the current one.
Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/11957c20-b178-4027-9b0a-e32e9591dd7c@moroto.mountain
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuogee Hsieh <quic_khsieh@quicinc.com>
Date: Wed Jan 17 13:13:30 2024 -0800
drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA case
[ Upstream commit fcccdafd91f8bdde568b86ff70848cf83f029add ]
MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field.
dp_link_get_colorimetry_config() returns wrong colorimetry value
in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation.
Hence fix this problem by having dp_link_get_colorimetry_config()
return defined CEA RGB colorimetry value in the case of
DP_TEST_DYNAMIC_RANGE_CEA.
Changes in V2:
-- drop retrieving colorimetry from colorspace
-- drop dr = link->dp_link.test_video.test_dyn_range assignment
Changes in V3:
-- move defined MISCr0a Colorimetry vale to dp_reg.h
-- rewording commit title
-- rewording commit text to more precise describe this patch
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/574888/
Link: https://lore.kernel.org/r/1705526010-597-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Abhinav Kumar <quic_abhinavk@quicinc.com>
Date: Wed Jan 17 11:41:09 2024 -0800
drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
[ Upstream commit 7f3d03c48b1eb6bc45ab20ca98b8b11be25f9f52 ]
The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.
Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/574878/
Link: https://lore.kernel.org/r/20240117194109.21609-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuogee Hsieh <quic_khsieh@quicinc.com>
Date: Wed Jan 10 12:18:51 2024 -0800
drm/msms/dp: fixed link clock divider bits be over written in BPC unknown case
[ Upstream commit 77e8aad5519e04f6c1e132aaec1c5f8faf41844f ]
Since the value of DP_TEST_BIT_DEPTH_8 is already left shifted, in the
BPC unknown case, the additional shift causes spill over to the other
bits of the [DP_CONFIGURATION_CTRL] register.
Fix this by changing the return value of dp_link_get_test_bits_depth()
in the BPC unknown case to (DP_TEST_BIT_DEPTH_8 >> DP_TEST_BIT_DEPTH_SHIFT).
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/573989/
Link: https://lore.kernel.org/r/1704917931-30133-1-git-send-email-quic_khsieh@quicinc.com
[quic_abhinavk@quicinc.com: fix minor checkpatch warning to align with opening braces]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baokun Li <libaokun1@huawei.com>
Date: Thu Jan 4 22:20:35 2024 +0800
ext4: regenerate buddy after block freeing failed if under fc replay
[ Upstream commit c9b528c35795b711331ed36dc3dbee90d5812d4e ]
This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case.
Reported-by: Jan Kara <jack@suse.cz>
Fixes: 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Tue Oct 17 17:04:39 2023 +0300
fs/ntfs3: Fix an NULL dereference bug
[ Upstream commit b2dd7b953c25ffd5912dda17e980e7168bebcf6c ]
The issue here is when this is called from ntfs_load_attr_list(). The
"size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow
on a 64bit systems but on 32bit systems the "+ 1023" can overflow and
the result is zero. This means that the kmalloc will succeed by
returning the ZERO_SIZE_PTR and then the memcpy() will crash with an
Oops on the next line.
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Frederic Weisbecker <frederic@kernel.org>
Date: Mon Jan 29 15:56:36 2024 -0800
hrtimer: Report offline hrtimer enqueue
commit dad6a09f3148257ac1773cd90934d721d68ab595 upstream.
The hrtimers migration on CPU-down hotplug process has been moved
earlier, before the CPU actually goes to die. This leaves a small window
of opportunity to queue an hrtimer in a blind spot, leaving it ignored.
For example a practical case has been reported with RCU waking up a
SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that
way a sched/rt timer to the local offline CPU.
Make sure such situations never go unnoticed and warn when that happens.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Loic Prylli <lprylli@netflix.com>
Date: Fri Nov 3 11:30:55 2023 +0100
hwmon: (aspeed-pwm-tacho) mutex for tach reading
[ Upstream commit 1168491e7f53581ba7b6014a39a49cfbbb722feb ]
the ASPEED_PTCR_RESULT Register can only hold the result for a
single fan input. Adding a mutex to protect the register until the
reading is done.
Signed-off-by: Loic Prylli <lprylli@netflix.com>
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Link: https://lore.kernel.org/r/121d888762a1232ef403cf35230ccf7b3887083a.1699007401.git.alexander.hansen@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Rui <rui.zhang@intel.com>
Date: Fri Feb 2 17:21:35 2024 +0800
hwmon: (coretemp) Fix bogus core_id to attr name mapping
[ Upstream commit fdaf0c8629d4524a168cb9e4ad4231875749b28c ]
Before commit 7108b80a542b ("hwmon/coretemp: Handle large core ID
value"), there is a fixed mapping between
1. cpu_core_id
2. the index in pdata->core_data[] array
3. the sysfs attr name, aka "tempX_"
The later two always equal cpu_core_id + 2.
After the commit, pdata->core_data[] index is got from ida so that it
can handle sparse core ids and support more cores within a package.
However, the commit erroneously maps the sysfs attr name to
pdata->core_data[] index instead of cpu_core_id + 2.
As a result, the code is not aligned with the comments, and brings user
visible changes in hwmon sysfs on systems with sparse core id.
For example, before commit 7108b80a542b ("hwmon/coretemp: Handle large
core ID value"),
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon3/temp10_label:Core 8
/sys/class/hwmon/hwmon3/temp11_label:Core 9
after commit,
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon2/temp7_label:Core 8
/sys/class/hwmon/hwmon2/temp8_label:Core 9
Restore the previous behavior and rework the code, comments and variable
names to avoid future confusions.
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-3-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Rui <rui.zhang@intel.com>
Date: Fri Feb 2 17:21:34 2024 +0800
hwmon: (coretemp) Fix out-of-bounds memory access
[ Upstream commit 4e440abc894585a34c2904a32cd54af1742311b3 ]
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package.
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240202092144.71180-2-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: fdaf0c8629d4 ("hwmon: (coretemp) Fix bogus core_id to attr name mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 2 09:54:04 2024 +0000
inet: read sk->sk_family once in inet_recv_error()
[ Upstream commit eef00a82c568944f113f2de738156ac591bbd5cd ]
inet_recv_error() is called without holding the socket lock.
IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning.
Fixes: f4713a3dfad0 ("net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Fri Jan 26 17:07:23 2024 +0100
Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
commit 683cd8259a9b883a51973511f860976db2550a6e upstream.
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models
has stopped working after a suspend/resume.
The problem appears to be that atkbd_probe() fails when called
from atkbd_reconnect() on resume, which on systems where
ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS
failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was
skipped is weird, but apparently that is what is happening.
Fix this by also skipping ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Werner Sembach <wse@tuxedocomputers.com>
Date: Tue Dec 5 17:36:01 2023 +0100
Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
commit a60e6c3918d20848906ffcdfcf72ca6a8cfbcf2e upstream.
When closing the laptop lid with an external screen connected, the mouse
pointer has a constant movement to the lower right corner. Opening the
lid again stops this movement, but after that the touchpad does no longer
register clicks.
The touchpad is connected both via i2c-hid and PS/2, the predecessor of
this device (NS70MU) has the same layout in this regard and also strange
behaviour caused by the psmouse and the i2c-hid driver fighting over
touchpad control. This fix is reusing the same workaround by just
disabling the PS/2 aux port, that is only used by the touchpad, to give the
i2c-hid driver the lone control over the touchpad.
v2: Rebased on current master
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Thu Feb 1 06:42:36 2024 -0700
io_uring/net: fix sr->len for IORING_OP_RECV with MSG_WAITALL and buffers
commit 72bd80252feeb3bef8724230ee15d9f7ab541c6e upstream.
If we use IORING_OP_RECV with provided buffers and pass in '0' as the
length of the request, the length is retrieved from the selected buffer.
If MSG_WAITALL is also set and we get a short receive, then we may hit
the retry path which decrements sr->len and increments the buffer for
a retry. However, the length is still zero at this point, which means
that sr->len now becomes huge and import_ubuf() will cap it to
MAX_RW_COUNT and subsequently return -EFAULT for the range as a whole.
Fix this by always assigning sr->len once the buffer has been selected.
Cc: stable@vger.kernel.org
Fixes: 7ba89d2af17a ("io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Mon Jan 29 12:00:58 2024 -0700
io_uring/net: limit inline multishot retries
Commit 76b367a2d83163cf19173d5cb0b562acbabc8eac upstream.
If we have multiple clients and some/all are flooding the receives to
such an extent that we can retry a LOT handling multishot receives, then
we can be starving some clients and hence serving traffic in an
imbalanced fashion.
Limit multishot retry attempts to some arbitrary value, whose only
purpose serves to ensure that we don't keep serving a single connection
for way too long. We default to 32 retries, which should be more than
enough to provide fairness, yet not so small that we'll spend too much
time requeuing rather than handling traffic.
Cc: stable@vger.kernel.org
Depends-on: 704ea888d646 ("io_uring/poll: add requeue return code from poll multishot handling")
Depends-on: 1e5d765a82f ("io_uring/net: un-indent mshot retry path in io_recv_finish()")
Depends-on: e84b01a880f6 ("io_uring/poll: move poll execution helpers higher up")
Fixes: b3fdea6ecb55 ("io_uring: multishot recv")
Fixes: 9bb66906f23e ("io_uring: support multishot in recvmsg")
Link: https://github.com/axboe/liburing/issues/1043
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Mon Jan 29 11:54:18 2024 -0700
io_uring/net: un-indent mshot retry path in io_recv_finish()
Commit 91e5d765a82fb2c9d0b7ad930d8953208081ddf1 upstream.
In preparation for putting some retry logic in there, have the done
path just skip straight to the end rather than have too much nesting
in here.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Mon Jan 29 11:57:11 2024 -0700
io_uring/poll: add requeue return code from poll multishot handling
Commit 704ea888d646cb9d715662944cf389c823252ee0 upstream.
Since our poll handling is edge triggered, multishot handlers retry
internally until they know that no more data is available. In
preparation for limiting these retries, add an internal return code,
IOU_REQUEUE, which can be used to inform the poll backend about the
handler wanting to retry, but that this should happen through a normal
task_work requeue rather than keep hammering on the issue side for this
one request.
No functional changes in this patch, nobody is using this return code
just yet.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Mon Jan 29 11:52:54 2024 -0700
io_uring/poll: move poll execution helpers higher up
Commit e84b01a880f635e3084a361afba41f95ff500d12 upstream.
In preparation for calling __io_poll_execute() higher up, move the
functions to avoid forward declarations.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xiubo Li <xiubli@redhat.com>
Date: Thu Dec 14 16:01:03 2023 +0800
libceph: just wait for more data to be available on the socket
[ Upstream commit 8e46a2d068c92a905d01cbb018b00d66991585ab ]
A short read may occur while reading the message footer from the
socket. Later, when the socket is ready for another read, the
messenger invokes all read_partial_*() handlers, including
read_partial_sparse_msg_data(). The expectation is that
read_partial_sparse_msg_data() would bail, allowing the messenger to
invoke read_partial() for the footer and pick up where it left off.
However read_partial_sparse_msg_data() violates that and ends up
calling into the state machine in the OSD client. The sparse-read
state machine assumes that it's a new op and interprets some piece of
the footer as the sparse-read header and returns bogus extents/data
length, etc.
To determine whether read_partial_sparse_msg_data() should bail, let's
reuse cursor->total_resid. Because once it reaches to zero that means
all the extents and data have been successfully received in last read,
else it could break out when partially reading any of the extents and
data. And then osd_sparse_read() could continue where it left off.
[ idryomov: changelog ]
Link: https://tracker.ceph.com/issues/63586
Fixes: d396f89db39a ("libceph: add sparse read support to msgr1")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xiubo Li <xiubli@redhat.com>
Date: Thu Dec 14 09:21:15 2023 +0800
libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*()
[ Upstream commit ee97302fbc0c98a25732d736fc73aaf4d62c4128 ]
These functions are supposed to behave like other read_partial_*()
handlers: the contract with messenger v1 is that the handler bails if
the area of the message it's responsible for is already processed.
This comes up when handling short reads from the socket.
[ idryomov: changelog ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 8e46a2d068c9 ("libceph: just wait for more data to be available on the socket")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri Feb 16 19:10:57 2024 +0100
Linux 6.6.17
Link: https://lore.kernel.org/r/20240213171852.948844634@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Link: https://lore.kernel.org/r/20240214142247.920076071@linuxfoundation.org
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Catherine Hoang <catherine.hoang@oracle.com>
Date: Thu Feb 8 15:20:34 2024 -0800
MAINTAINERS: add Catherine as xfs maintainer for 6.6.y
This is an attempt to direct the bots and humans that are testing
LTS 6.6.y towards the maintainer of xfs in the 6.6.y tree.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aurelien Jarno <aurelien@aurel32.net>
Date: Sat Jan 13 19:33:31 2024 +0100
media: solo6x10: replace max(a, min(b, c)) by clamp(b, a, c)
commit 31e97d7c9ae3de072d7b424b2cf706a03ec10720 upstream.
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver. This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):
- the preprocessed size from 121 MiB to 4.5 MiB;
- the build CPU time from 46.8 s to 1.6 s;
- the build memory from 2786 MiB to 98MiB.
In fine, this allows this relatively simple C file to be built on a
32-bit system.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/
Cc: <stable@vger.kernel.org> # v6.7+
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <regressions@leemhuis.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Tue Dec 12 22:34:56 2023 +0100
mm: Introduce flush_cache_vmap_early()
[ Upstream commit 7a92fc8b4d20680e4c20289a670d8fca2d1f2c1b ]
The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot process, so early that it cannot use the
flush_cache_vmap() function which may depend on structures not yet
initialized (for example in riscv, we currently send an IPI to flush
other cpus TLB).
But on some architectures, we must call flush_cache_vmap(): for example,
in riscv, some uarchs can cache invalid TLB entries so we need to flush
the new established mapping to avoid taking an exception.
So fix this by introducing a new function flush_cache_vmap_early() which
is called right after setting the new page table entry and before
accessing this new mapping. This new function implements a local flush
tlb on riscv and is no-op for other architectures (same as today).
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ivan Vecera <ivecera@redhat.com>
Date: Thu Feb 1 10:47:51 2024 +0100
net: atlantic: Fix DMA mapping for PTP hwts ring
[ Upstream commit 2e7d3b67630dfd8f178c41fa2217aa00e79a5887 ]
Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes
for PTP HWTS ring but then generic aq_ring_free() does not take this
into account.
Create and use a specific function to free HWTS ring to fix this
issue.
Trace:
[ 215.351607] ------------[ cut here ]------------
[ 215.351612] DMA-API: atlantic 0000:4b:00.0: device driver frees DMA memory with different size [device address=0x00000000fbdd0000] [map size=34816 bytes] [unmap size=32768 bytes]
[ 215.351635] WARNING: CPU: 33 PID: 10759 at kernel/dma/debug.c:988 check_unmap+0xa6f/0x2360
...
[ 215.581176] Call Trace:
[ 215.583632] <TASK>
[ 215.585745] ? show_trace_log_lvl+0x1c4/0x2df
[ 215.590114] ? show_trace_log_lvl+0x1c4/0x2df
[ 215.594497] ? debug_dma_free_coherent+0x196/0x210
[ 215.599305] ? check_unmap+0xa6f/0x2360
[ 215.603147] ? __warn+0xca/0x1d0
[ 215.606391] ? check_unmap+0xa6f/0x2360
[ 215.610237] ? report_bug+0x1ef/0x370
[ 215.613921] ? handle_bug+0x3c/0x70
[ 215.617423] ? exc_invalid_op+0x14/0x50
[ 215.621269] ? asm_exc_invalid_op+0x16/0x20
[ 215.625480] ? check_unmap+0xa6f/0x2360
[ 215.629331] ? mark_lock.part.0+0xca/0xa40
[ 215.633445] debug_dma_free_coherent+0x196/0x210
[ 215.638079] ? __pfx_debug_dma_free_coherent+0x10/0x10
[ 215.643242] ? slab_free_freelist_hook+0x11d/0x1d0
[ 215.648060] dma_free_attrs+0x6d/0x130
[ 215.651834] aq_ring_free+0x193/0x290 [atlantic]
[ 215.656487] aq_ptp_ring_free+0x67/0x110 [atlantic]
...
[ 216.127540] ---[ end trace 6467e5964dd2640b ]---
[ 216.132160] DMA-API: Mapped at:
[ 216.132162] debug_dma_alloc_coherent+0x66/0x2f0
[ 216.132165] dma_alloc_attrs+0xf5/0x1b0
[ 216.132168] aq_ring_hwts_rx_alloc+0x150/0x1f0 [atlantic]
[ 216.132193] aq_ptp_ring_alloc+0x1bb/0x540 [atlantic]
[ 216.132213] aq_nic_init+0x4a1/0x760 [atlantic]
Fixes: 94ad94558b0f ("net: aquantia: add PTP rings infrastructure")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201094752.883026-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Furong Xu <0x1207@gmail.com>
Date: Sat Feb 3 13:31:33 2024 +0800
net: stmmac: xgmac: fix a typo of register name in DPP safety handling
commit 1ce2654d87e2fb91fea83b288bd9b2641045e42a upstream.
DDPP is copied from Synopsys Data book:
DDPP: Disable Data path Parity Protection.
When it is 0x0, Data path Parity Protection is enabled.
When it is 0x1, Data path Parity Protection is disabled.
The macro name should be XGMAC_DPP_DISABLE.
Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Furong Xu <0x1207@gmail.com>
Date: Wed Jan 31 10:08:28 2024 +0800
net: stmmac: xgmac: fix handling of DPP safety error for DMA channels
[ Upstream commit 46eba193d04f8bd717e525eb4110f3c46c12aec3 ]
Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in
XGMAC core") checks and reports safety errors, but leaves the
Data Path Parity Errors for each channel in DMA unhandled at all, lead to
a storm of interrupt.
Fix it by checking and clearing the DMA_DPP_Interrupt_Status register.
Fixes: 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Horman <horms@kernel.org>
Date: Thu Feb 8 09:48:27 2024 +0000
net: stmmac: xgmac: use #define for string constants
commit 1692b9775e745f84b69dc8ad0075b0855a43db4e upstream.
The cited commit introduces and uses the string constants dpp_tx_err and
dpp_rx_err. These are assigned to constant fields of the array
dwxgmac3_error_desc.
It has been reported that on GCC 6 and 7.5.0 this results in warnings
such as:
.../dwxgmac2_core.c:836:20: error: initialiser element is not constant
{ true, "TDPES0", dpp_tx_err },
I have been able to reproduce this using: GCC 7.5.0, 8.4.0, 9.4.0 and 10.5.0.
But not GCC 13.2.0.
So it seems this effects older compilers but not newer ones.
As Jon points out in his report, the minimum compiler supported by
the kernel is GCC 5.1, so it does seem that this ought to be fixed.
It is not clear to me what combination of 'const', if any, would address
this problem. So this patch takes of using #defines for the string
constants
Compile tested only.
Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/netdev/c25eb595-8d91-40ea-9f52-efa15ebafdbc@nvidia.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402081135.lAxxBXHk-lkp@intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208-xgmac-const-v1-1-e69a1eeabfc8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Feb 1 17:53:24 2024 +0000
netdevsim: avoid potential loop in nsim_dev_trap_report_work()
[ Upstream commit ba5e1272142d051dcc57ca1d3225ad8a089f9858 ]
Many syzbot reports include the following trace [1]
If nsim_dev_trap_report_work() can not grab the mutex,
it should rearm itself at least one jiffie later.
[1]
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 32383 Comm: kworker/0:2 Not tainted 6.8.0-rc2-syzkaller-00031-g861c0981648f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events nsim_dev_trap_report_work
RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:89 [inline]
RIP: 0010:memory_is_nonzero mm/kasan/generic.c:104 [inline]
RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:129 [inline]
RIP: 0010:memory_is_poisoned mm/kasan/generic.c:161 [inline]
RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline]
RIP: 0010:kasan_check_range+0x101/0x190 mm/kasan/generic.c:189
Code: 07 49 39 d1 75 0a 45 3a 11 b8 01 00 00 00 7c 0b 44 89 c2 e8 21 ed ff ff 83 f0 01 5b 5d 41 5c c3 48 85 d2 74 4f 48 01 ea eb 09 <48> 83 c0 01 48 39 d0 74 41 80 38 00 74 f2 eb b6 41 bc 08 00 00 00
RSP: 0018:ffffc90012dcf998 EFLAGS: 00000046
RAX: fffffbfff258af1e RBX: fffffbfff258af1f RCX: ffffffff8168eda3
RDX: fffffbfff258af1f RSI: 0000000000000004 RDI: ffffffff92c578f0
RBP: fffffbfff258af1e R08: 0000000000000000 R09: fffffbfff258af1e
R10: ffffffff92c578f3 R11: ffffffff8acbcbc0 R12: 0000000000000002
R13: ffff88806db38400 R14: 1ffff920025b9f42 R15: ffffffff92c578e8
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c00994e078 CR3: 000000002c250000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
instrument_atomic_read include/linux/instrumented.h:68 [inline]
atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
queued_spin_is_locked include/asm-generic/qspinlock.h:57 [inline]
debug_spin_unlock kernel/locking/spinlock_debug.c:101 [inline]
do_raw_spin_unlock+0x53/0x230 kernel/locking/spinlock_debug.c:141
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:150 [inline]
_raw_spin_unlock_irqrestore+0x22/0x70 kernel/locking/spinlock.c:194
debug_object_activate+0x349/0x540 lib/debugobjects.c:726
debug_work_activate kernel/workqueue.c:578 [inline]
insert_work+0x30/0x230 kernel/workqueue.c:1650
__queue_work+0x62e/0x11d0 kernel/workqueue.c:1802
__queue_delayed_work+0x1bf/0x270 kernel/workqueue.c:1953
queue_delayed_work_on+0x106/0x130 kernel/workqueue.c:1989
queue_delayed_work include/linux/workqueue.h:563 [inline]
schedule_delayed_work include/linux/workqueue.h:677 [inline]
nsim_dev_trap_report_work+0x9c0/0xc80 drivers/net/netdevsim/dev.c:842
process_one_work+0x886/0x15d0 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x8b9/0x1290 kernel/workqueue.c:2787
kthread+0x2c6/0x3a0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
</TASK>
Fixes: 012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201175324.3752746-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Thu Feb 1 22:58:36 2024 +0100
netfilter: nft_compat: narrow down revision to unsigned 8-bits
[ Upstream commit 36fa8d697132b4bed2312d700310e8a78b000c84 ]
xt_find_revision() expects u8, restrict it to this datatype.
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Thu Feb 1 23:33:29 2024 +0100
netfilter: nft_compat: reject unused compat flag
[ Upstream commit 292781c3c5485ce33bd22b2ef1b2bed709b4d672 ]
Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL
instead.
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Fri Feb 2 00:05:23 2024 +0100
netfilter: nft_compat: restrict match/target protocol to u16
[ Upstream commit d694b754894c93fb4d71a7f3699439dec111decc ]
xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32.
NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in
nla_policy is s16, see 3e48be05f3c7 ("netlink: add attribute range
validation to policy").
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Mon Feb 5 14:59:24 2024 +0100
netfilter: nft_ct: reject direction for ct id
[ Upstream commit 38ed1c7062ada30d7c11e7a7acc749bf27aa14aa ]
Direction attribute is ignored, reject it in case this ever needs to be
supported
Fixes: 3087c3f7c23b ("netfilter: nft_ct: Add ct id support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Wed Feb 7 21:52:47 2024 +0100
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
[ Upstream commit 47b1c03c3c1a119435480a1e73f27197dc59131d ]
After next patch simple kfree() is not enough anymore, so add
a helper for it.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 5a8cdf6fd860 ("netfilter: nft_set_pipapo: remove scratch_aligned pointer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Thu Feb 8 10:31:29 2024 +0100
netfilter: nft_set_pipapo: remove scratch_aligned pointer
[ Upstream commit 5a8cdf6fd860ac5e6d08d72edbcecee049a7fec4 ]
use ->scratch for both avx2 and the generic implementation.
After previous change the scratch->map member is always aligned properly
for AVX2, so we can just use scratch->map in AVX2 too.
The alignoff delta is stored in the scratchpad so we can reconstruct
the correct address to free the area again.
Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Wed Feb 7 21:52:46 2024 +0100
netfilter: nft_set_pipapo: store index in scratch maps
[ Upstream commit 76313d1a4aa9e30d5b43dee5efd8bcd4d8250006 ]
Pipapo needs a scratchpad area to keep state during matching.
This state can be large and thus cannot reside on stack.
Each set preallocates percpu areas for this.
On each match stage, one scratchpad half starts with all-zero and the other
is inited to all-ones.
At the end of each stage, the half that starts with all-ones is
always zero. Before next field is tested, pointers to the two halves
are swapped, i.e. resmap pointer turns into fill pointer and vice versa.
After the last field has been processed, pipapo stashes the
index toggle in a percpu variable, with assumption that next packet
will start with the all-zero half and sets all bits in the other to 1.
This isn't reliable.
There can be multiple sets and we can't be sure that the upper
and lower half of all set scratch map is always in sync (lookups
can be conditional), so one set might have swapped, but other might
not have been queried.
Thus we need to keep the index per-set-and-cpu, just like the
scratchpad.
Note that this bug fix is incomplete, there is a related issue.
avx2 and normal implementation might use slightly different areas of the
map array space due to the avx2 alignment requirements, so
m->scratch (generic/fallback implementation) and ->scratch_aligned
(avx) may partially overlap. scratch and scratch_aligned are not distinct
objects, the latter is just the aligned address of the former.
After this change, write to scratch_align->map_index may write to
scratch->map, so this issue becomes more prominent, we can set to 1
a bit in the supposedly-all-zero area of scratch->map[].
A followup patch will remove the scratch_aligned and makes generic and
avx code use the same (aligned) area.
Its done in a separate change to ease review.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Wed Feb 7 18:49:51 2024 +0100
netfilter: nft_set_rbtree: skip end interval element from gc
commit 60c0c230c6f046da536d3df8b39a20b9a9fd6af0 upstream.
rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active.
Fixes: f718863aca46 ("netfilter: nft_set_rbtree: fix overlap expiration walk")
Cc: stable@vger.kernel.org
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhipeng Lu <alexious@zju.edu.cn>
Date: Thu Feb 1 20:47:13 2024 +0800
octeontx2-pf: Fix a memleak otx2_sq_init
[ Upstream commit b09b58e31b0f43d76f79b9943da3fb7c2843dcbb ]
When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be
freed to prevent memleak.
Fixes: c9c12d339d93 ("octeontx2-pf: Add support for PTP clock")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: James Clark <james.clark@arm.com>
Date: Wed Jan 24 09:43:57 2024 +0000
perf evlist: Fix evlist__new_default() for > 1 core PMU
[ Upstream commit 7814fe24a6211a610db0b408d87420403b5b7a36 ]
The 'Session topology' test currently fails with this message when
evlist__new_default() opens more than one event:
32: Session topology :
--- start ---
templ file: /tmp/perf-test-vv5YzZ
Using CPUID 0x00000000410fd070
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xb00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5
non matching sample_type
FAILED tests/topology.c:73 can't get session
---- end ----
Session topology: FAILED!
This is because when re-opening the file and parsing the header, Perf
expects that any file that has more than one event has the sample ID
flag set. Perf record already sets the flag in a similar way when there
is more than one event, so add the same logic to evlist__new_default().
evlist__new_default() is only currently used in tests, so I don't
expect this change to have any other side effects. The other tests that
use it don't save and re-open the file so don't hit this issue.
The session topology test has been failing on Arm big.LITTLE platforms
since commit 251aa040244a3b17 ("perf parse-events: Wildcard most
"numeric" events") when evlist__new_default() started opening multiple
events for 'cycles'.
Fixes: 251aa040244a3b17 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
[ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ]
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/
Link: https://lore.kernel.org/r/20240124094358.489372-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Fri Jan 5 18:37:03 2024 +0900
phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
[ Upstream commit 249abaf3bf0dd07f5ddebbb2fe2e8f4d675f074e ]
Even if device_create_file() returns error code,
rcar_gen3_phy_usb2_probe() will return zero because the "ret" is
variable shadowing.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202312161021.gOLDl48K-lkp@intel.com/
Fixes: 441a681b8843 ("phy: rcar-gen3-usb2: fix implementation for runtime PM")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240105093703.3359949-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Lindgren <tony@atomide.com>
Date: Sun Jan 28 14:05:54 2024 +0200
phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
[ Upstream commit 7104ba0f1958adb250319e68a15eff89ec4fd36d ]
If the external phy working together with phy-omap-usb2 does not implement
send_srp(), we may still attempt to call it. This can happen on an idle
Ethernet gadget triggering a wakeup for example:
configfs-gadget.g1 gadget.0: ECM Suspend
configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup
...
Unable to handle kernel NULL pointer dereference at virtual address
00000000 when execute
...
PC is at 0x0
LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc]
...
musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core]
usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether]
eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c
dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4
sch_direct_xmit from __dev_queue_xmit+0x334/0xd88
__dev_queue_xmit from arp_solicit+0xf0/0x268
arp_solicit from neigh_probe+0x54/0x7c
neigh_probe from __neigh_event_send+0x22c/0x47c
__neigh_event_send from neigh_resolve_output+0x14c/0x1c0
neigh_resolve_output from ip_finish_output2+0x1c8/0x628
ip_finish_output2 from ip_send_skb+0x40/0xd8
ip_send_skb from udp_send_skb+0x124/0x340
udp_send_skb from udp_sendmsg+0x780/0x984
udp_sendmsg from __sys_sendto+0xd8/0x158
__sys_sendto from ret_fast_syscall+0x0/0x58
Let's fix the issue by checking for send_srp() and set_vbus() before
calling them. For USB peripheral only cases these both could be NULL.
Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Feb 5 17:10:04 2024 +0000
ppp_async: limit MRU to 64K
[ Upstream commit cb88cb53badb8aeb3955ad6ce80b07b598e310b8 ]
syzbot triggered a warning [1] in __alloc_pages():
WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)
Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K")
Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU)
[1]:
WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events_unbound flush_to_ldisc
pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537
sp : ffff800093967580
x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000
x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0
x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8
x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120
x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005
x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000
x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001
x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0
Call trace:
__alloc_pages+0x308/0x698 mm/page_alloc.c:4543
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
__kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926
__do_kmalloc_node mm/slub.c:3969 [inline]
__kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001
kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590
__alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651
__netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715
netdev_alloc_skb include/linux/skbuff.h:3235 [inline]
dev_alloc_skb include/linux/skbuff.h:3248 [inline]
ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline]
ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341
tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390
tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37
receive_buf drivers/tty/tty_buffer.c:444 [inline]
flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494
process_one_work+0x694/0x1204 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x938/0xef4 kernel/workqueue.c:2787
kthread+0x288/0x310 kernel/kthread.c:388
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+c5da1f087c9e4ec6c933@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240205171004.1059724-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Tue Feb 13 15:44:48 2024 +0100
Revert "ASoC: amd: Add new dmi entries for acp5x platform"
This reverts commit c87011986fad043ce31a5e749f113540a179a73f which is
commit c3ab23a10771bbe06300e5374efa809789c65455 upstream.
Link: https://lore.kernel.org/r/CAD_nV8BG0t7US=+C28kQOR==712MPfZ9m-fuKksgoZCgrEByCw@mail.gmail.com
Reported-by: Ted Chang <tedchang2010@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Badhri Jagan Sridharan <badhri@google.com>
Date: Wed Jan 17 11:47:42 2024 +0000
Revert "usb: typec: tcpm: fix cc role at port reset"
commit b717dfbf73e842d15174699fe2c6ee4fdde8aa1f upstream.
This reverts commit 1e35f074399dece73d5df11847d4a0d7a6f49434.
Given that ERROR_RECOVERY calls into PORT_RESET for Hi-Zing
the CC pins, setting CC pins to default state during PORT_RESET
breaks error recovery.
4.5.2.2.2.1 ErrorRecovery State Requirements
The port shall not drive VBUS or VCONN, and shall present a
high-impedance to ground (above zOPEN) on its CC1 and CC2 pins.
Hi-Zing the CC pins is the inteded behavior for PORT_RESET.
CC pins are set to default state after tErrorRecovery in
PORT_RESET_WAIT_OFF.
4.5.2.2.2.2 Exiting From ErrorRecovery State
A Sink shall transition to Unattached.SNK after tErrorRecovery.
A Source shall transition to Unattached.SRC after tErrorRecovery.
Cc: stable@vger.kernel.org
Cc: Frank Wang <frank.wang@rock-chips.com>
Fixes: 1e35f074399d ("usb: typec: tcpm: fix cc role at port reset")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240117114742.2587779-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Thu Nov 23 13:42:14 2023 +0000
riscv: declare overflow_stack as exported from traps.c
[ Upstream commit 2cf963787529f615f7c93bdcf13a5e82029e7f38 ]
The percpu area overflow_stacks is exported from arch/riscv/kernel/traps.c
for use in the entry code, but is not declared anywhere. Add the relevant
declaration to arch/riscv/include/asm/stacktrace.h to silence the following
sparse warning:
arch/riscv/kernel/traps.c:395:1: warning: symbol '__pcpu_scope_overflow_stack' was not declared. Should it be static?
We don't add the stackinfo_get_overflow() call as for some of the other
architectures as this doesn't seem to be used yet, so just silence the
warning.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: be97d0db5f44 ("riscv: VMAP_STACK overflow detection thread-safe")
Link: https://lore.kernel.org/r/20231123134214.81481-1-ben.dooks@codethink.co.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Tue Jan 30 13:01:14 2024 +0100
riscv: Fix arch_hugetlb_migration_supported() for NAPOT
[ Upstream commit ce68c035457bdd025a9961e0ba2157323090c581 ]
arch_hugetlb_migration_supported() must be reimplemented to add support
for NAPOT hugepages, which is done here.
Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240130120114.106003-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Wed Jan 17 20:57:41 2024 +0100
riscv: Fix hugetlb_mask_last_page() when NAPOT is enabled
[ Upstream commit a179a4bfb694f80f2709a1d0398469e787acb974 ]
When NAPOT is enabled, a new hugepage size is available and then we need
to make hugetlb_mask_last_page() aware of that.
Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240117195741.1926459-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Wed Jan 17 20:57:40 2024 +0100
riscv: Fix set_huge_pte_at() for NAPOT mapping
[ Upstream commit 1458eb2c9d88ad4b35eb6d6a4aa1d43d8fbf7f62 ]
As stated by the privileged specification, we must clear a NAPOT
mapping and emit a sfence.vma before setting a new translation.
Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240117195741.1926459-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Sun Jan 28 13:04:05 2024 +0100
riscv: Flush the tlb when a page directory is freed
[ Upstream commit 97cf301fa42e8ea6e0a24de97bc0abcdc87d9504 ]
The riscv privileged specification mandates to flush the TLB whenever a
page directory is modified, so add that to tlb_flush().
Fixes: c5e9b2c2ae82 ("riscv: Improve tlb_flush()")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240128120405.25876-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Mon Oct 30 14:30:28 2023 +0100
riscv: Improve flush_tlb_kernel_range()
[ Upstream commit 5e22bfd520ea8740e9a20314d2a890baf304c9d2 ]
This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.
The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Mon Oct 30 14:30:25 2023 +0100
riscv: Improve tlb_flush()
[ Upstream commit c5e9b2c2ae82231d85d9650854e7b3e97dde33da ]
For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_gather fields to provide a more
fine-grained flush of the TLB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Mon Oct 30 14:30:27 2023 +0100
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
[ Upstream commit 9d4e8d5fa7dbbb606b355f40d918a1feef821bc5 ]
Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vincent Chen <vincent.chen@sifive.com>
Date: Wed Jan 17 22:03:33 2024 +0800
riscv: mm: execute local TLB flush after populating vmemmap
[ Upstream commit d9807d60c145836043ffa602328ea1d66dc458b1 ]
The spare_init() calls memmap_populate() many times to create VA to PA
mapping for the VMEMMAP area, where all "struct page" are located once
CONFIG_SPARSEMEM_VMEMMAP is defined. These "struct page" are later
initialized in the zone_sizes_init() function. However, during this
process, no sfence.vma instruction is executed for this VMEMMAP area.
This omission may cause the hart to fail to perform page table walk
because some data related to the address translation is invisible to the
hart. To solve this issue, the local_flush_tlb_kernel_range() is called
right after the sparse_init() to execute a sfence.vma instruction for this
VMEMMAP area, ensuring that all data related to the address translation
is visible to the hart.
Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240117140333.2479667-1-vincent.chen@sifive.com
Fixes: 7a92fc8b4d20 ("mm: Introduce flush_cache_vmap_early()")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miguel Ojeda <ojeda@kernel.org>
Date: Wed Aug 23 18:02:42 2023 +0200
rust: arc: add explicit `drop()` around `Box::from_raw()`
commit 828176d037e29f813792a8b3ac1591834240e96f upstream.
`Box::from_raw()` is `#[must_use]`, which means the result cannot
go unused.
In Rust 1.71.0, this was not detected because the block expression
swallows the diagnostic [1]:
unsafe { Box::from_raw(self.ptr.as_ptr()) };
It would have been detected, however, if the line had been instead:
unsafe { Box::from_raw(self.ptr.as_ptr()); }
i.e. the semicolon being inside the `unsafe` block, rather than
outside.
In Rust 1.72.0, the compiler started warning about this [2], so
without this patch we will get:
error: unused return value of `alloc::boxed::Box::<T>::from_raw` that must be used
--> rust/kernel/sync/arc.rs:302:22
|
302 | unsafe { Box::from_raw(self.ptr.as_ptr()) };
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: call `drop(Box::from_raw(ptr))` if you intend to drop the `Box`
= note: `-D unused-must-use` implied by `-D warnings`
help: use `let _ = ...` to ignore the resulting value
|
302 | unsafe { let _ = Box::from_raw(self.ptr.as_ptr()); };
| +++++++ +
Thus add an add an explicit `drop()` as the `#[must_use]`'s
annotation suggests (instead of the more general help line).
Link: https://github.com/rust-lang/rust/issues/104253 [1]
Link: https://github.com/rust-lang/rust/pull/112529 [2]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20230823160244.188033-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miguel Ojeda <ojeda@kernel.org>
Date: Thu Oct 5 23:05:54 2023 +0200
rust: print: use explicit link in documentation
commit a53d8cdd5a0aec75ae32badc2d8995c59ea6e3f0 upstream.
The future `rustdoc` in the Rust 1.73.0 upgrade requires an explicit
link for `pr_info!`:
error: unresolved link to `pr_info`
--> rust/kernel/print.rs:395:63
|
395 | /// Use only when continuing a previous `pr_*!` macro (e.g. [`pr_info!`]).
| ^^^^^^^^ no item named `pr_info` in scope
|
= note: `macro_rules` named `pr_info` exists in this crate, but it is not in scope at this link's location
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
Thus do so to avoid a broken link while upgrading.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20231005210556.466856-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miguel Ojeda <ojeda@kernel.org>
Date: Thu Oct 5 23:05:53 2023 +0200
rust: task: remove redundant explicit link
commit c61bcc278b1924da13fd52edbd46b08a518c11ef upstream.
Starting with Rust 1.73.0, `rustdoc` detects redundant explicit
links with its new lint `redundant_explicit_links` [1]:
error: redundant explicit link target
--> rust/kernel/task.rs:85:21
|
85 | /// [`current`](crate::current) macro because it is safe.
| --------- ^^^^^^^^^^^^^^ explicit target is redundant
| |
| because label contains path that resolves to same destination
|
= note: when a link's destination is not specified,
the label is used to resolve intra-doc links
= note: `-D rustdoc::redundant-explicit-links` implied by `-D warnings`
help: remove explicit link target
|
85 | /// [`current`] macro because it is safe.
In order to avoid the warning in the compiler upgrade commit,
make it an intra-doc link as the tool suggests.
Link: https://github.com/rust-lang/rust/pull/113167 [1]
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Link: https://lore.kernel.org/r/20231005210556.466856-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miguel Ojeda <ojeda@kernel.org>
Date: Wed Aug 23 18:02:43 2023 +0200
rust: upgrade to Rust 1.72.1
commit ae6df65dabc3f8bd89663d96203963323e266d90 upstream.
This is the third upgrade to the Rust toolchain, from 1.71.1 to 1.72.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Other improvements
Previously, the compiler could incorrectly generate a `.eh_frame`
section under `-Cpanic=abort`. We were hitting this bug when debug
assertions were enabled (`CONFIG_RUST_DEBUG_ASSERTIONS=y`) [4]:
LD .tmp_vmlinux.kallsyms1
ld.lld: error: <internal>:(.eh_frame) is being placed in '.eh_frame'
Gary fixed the issue in Rust 1.72.0 [5].
# Required changes
For the upgrade, the following changes are required:
- A call to `Box::from_raw` in `rust/kernel/sync/arc.rs` now requires
an explicit `drop()` call. See previous patch for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1721-2023-09-19 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1012 [4]
Link: https://github.com/rust-lang/rust/pull/112403 [5]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20230823160244.188033-3-ojeda@kernel.org
[ Used 1.72.1 instead of .0 (no changes in `alloc`) and reworded
to mention that we hit the `.eh_frame` bug under debug assertions. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miguel Ojeda <ojeda@kernel.org>
Date: Thu Oct 5 23:05:55 2023 +0200
rust: upgrade to Rust 1.73.0
commit e08ff622c91af997cb89bc47e90a1a383e938bd0 upstream.
This is the next upgrade to the Rust toolchain, from 1.72.1 to 1.73.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Required changes
For the upgrade, the following changes are required:
- Allow `internal_features` for `feature(compiler_builtins)` since
now Rust warns about using internal compiler and standard library
features (similar to how it also warns about incomplete ones) [4].
- A cleanup for a documentation link thanks to a new `rustdoc` lint.
See previous commits for details.
- A need to make an intra-doc link to a macro explicit, due to a
change in behavior in `rustdoc`. See previous commits for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1730-2023-10-05 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/compiler-team/issues/596 [4]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231005210556.466856-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Howells <dhowells@redhat.com>
Date: Fri Feb 2 15:19:16 2024 +0000
rxrpc: Fix counting of new acks and nacks
[ Upstream commit 41b7fa157ea1c8c3a575ca7f5f32034de9bee3ae ]
Fix the counting of new acks and nacks when parsing a packet - something
that is used in congestion control.
As the code stands, it merely notes if there are any nacks whereas what we
really should do is compare the previous SACK table to the new one,
assuming we get two successive ACK packets with nacks in them. However, we
really don't want to do that if we can avoid it as the tables might not
correspond directly as one may be shifted from the other - something that
will only get harder to deal with once extended ACK tables come into full
use (with a capacity of up to 8192).
Instead, count the number of nacks shifted out of the old SACK, the number
of nacks retained in the portion still active and the number of new acks
and nacks in the new table then calculate what we need.
Note this ends up a bit of an estimate as the Rx protocol allows acks to be
withdrawn by the receiver and packets requested to be retransmitted.
Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Howells <dhowells@redhat.com>
Date: Fri Feb 2 15:19:14 2024 +0000
rxrpc: Fix delayed ACKs to not set the reference serial number
[ Upstream commit e7870cf13d20f56bfc19f9c3e89707c69cf104ef ]
Fix the construction of delayed ACKs to not set the reference serial number
as they can't be used as an RTT reference.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Howells <dhowells@redhat.com>
Date: Fri Feb 2 15:19:13 2024 +0000
rxrpc: Fix generation of serial numbers to skip zero
[ Upstream commit f31041417bf7f4a4df8b3bfb52cb31bbe805b934 ]
In the Rx protocol, every packet generated is marked with a per-connection
monotonically increasing serial number. This number can be referenced in
an ACK packet generated in response to an incoming packet - thereby
allowing the sender to use this for RTT determination, amongst other
things.
However, if the reference field in the ACK is zero, it doesn't refer to any
incoming packet (it could be a ping to find out if a packet got lost, for
example) - so we shouldn't generate zero serial numbers.
Fix the generation of serial numbers to retry if it comes up with a zero.
Furthermore, since the serial numbers are only ever allocated within the
I/O thread this connection is bound to, there's no need for atomics so
remove that too.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Howells <dhowells@redhat.com>
Date: Fri Feb 2 15:19:15 2024 +0000
rxrpc: Fix response to PING RESPONSE ACKs to a dead call
[ Upstream commit 6f769f22822aa4124b556339781b04d810f0e038 ]
Stop rxrpc from sending a DUP ACK in response to a PING RESPONSE ACK on a
dead call. We may have initiated the ping but the call may have beaten the
response to completion.
Fixes: 18bfeba50dfd ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ming Lei <ming.lei@redhat.com>
Date: Sat Feb 3 10:45:21 2024 +0800
scsi: core: Move scsi_host_busy() out of host lock if it is for per-command
[ Upstream commit 4e6c9011990726f4d175e2cdfebe5b0b8cce4839 ]
Commit 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock
for waking up EH handler") intended to fix a hard lockup issue triggered by
EH. The core idea was to move scsi_host_busy() out of the host lock when
processing individual commands for EH. However, a suggested style change
inadvertently caused scsi_host_busy() to remain under the host lock. Fix
this by calling scsi_host_busy() outside the lock.
Fixes: 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler")
Cc: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240203024521.2006455-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yujie Liu <yujie.liu@intel.com>
Date: Fri Dec 29 21:19:31 2023 +0800
selftests/net: change shebang to bash to support "source"
[ Upstream commit 05d92cb0e919239c29b3a26da1f76f1e18fed7d3 ]
The patch set [1] added a general lib.sh in net selftests, and converted
several test scripts to source the lib.sh.
unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2])
have a /bin/sh shebang which may point to various shells in different
distributions, but "source" is only available in some of them. For
example, "source" is a built-it function in bash, but it cannot be
used in dash.
Refer to other scripts that were converted together, simply change the
shebang to bash to fix the following issues when the default /bin/sh
points to other shells.
not ok 51 selftests: net: unicast_extensions.sh # exit=1
v1 -> v2:
- Fix pmtu.sh which has the same issue as unicast_extensions.sh,
suggested by Hangbin
- Change the style of the "source" line to be consistent with other
tests, suggested by Hangbin
Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1]
Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2]
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 378f082eaf37 ("selftests/net: convert pmtu.sh to run it in unique namespace")
Fixes: 0f4765d0b48d ("selftests/net: convert unicast_extensions.sh to run it in unique namespace")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hangbin Liu <liuhangbin@gmail.com>
Date: Tue Dec 19 17:48:55 2023 +0800
selftests/net: convert pmtu.sh to run it in unique namespace
[ Upstream commit 378f082eaf3760cd7430fbcb1e4f8626bb6bc0ae ]
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hangbin Liu <liuhangbin@gmail.com>
Date: Sat Dec 2 10:01:10 2023 +0800
selftests/net: convert unicast_extensions.sh to run it in unique namespace
[ Upstream commit 0f4765d0b48d90ede9788c7edb2e072eee20f88e ]
Here is the test result after conversion.
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Sun Feb 4 08:56:18 2024 -0800
selftests: cmsg_ipv6: repeat the exact packet
[ Upstream commit 4b00d0c513da58b68df015968721b11396fe4ab3 ]
cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.
This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.
Repeat the "real" / expected packet.
Fixes: 9657ad09e1fa ("selftests: net: test IPV6_TCLASS")
Fixes: 05ae83d5a4a2 ("selftests: net: test IPV6_HOPLIMIT")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paolo Abeni <pabeni@redhat.com>
Date: Thu Feb 1 19:42:41 2024 +0100
selftests: net: avoid just another constant wait
[ Upstream commit 691bb4e49c98a47bc643dd808453136ce78b15b4 ]
Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.
Our CI has spotted another of such race:
# TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL]
# can't delete veth device in a timely manner, PMTU dst likely leaked
Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.
Fixes: b3cc4f8a8a41 ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paolo Abeni <pabeni@redhat.com>
Date: Thu Feb 1 19:42:38 2024 +0100
selftests: net: cut more slack for gro fwd tests.
[ Upstream commit cb9f4a30fb85e1f4f149ada595a67899adb3db19 ]
The udpgro_fwd.sh self-tests are somewhat unstable. There are
a few timing constraints the we struggle to meet on very slow
environments.
Instead of skipping the whole tests in such envs, increase the
test resilience WRT very slow hosts: increase the inter-packets
timeouts, avoid resetting the counters every second and finally
disable reduce the background traffic noise.
Tested with:
for I in $(seq 1 100); do
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:udpgro_fwd.sh || exit -1
done
in a slow environment.
Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paolo Abeni <pabeni@redhat.com>
Date: Thu Feb 1 19:42:40 2024 +0100
selftests: net: fix tcp listener handling in pmtu.sh
[ Upstream commit e71e016ad0f6e641a7898b8cda5f62f8e2beb2f1 ]
The pmtu.sh test uses a few TCP listener in a problematic way:
It hard-codes a constant timeout to wait for the listener starting-up
in background. That introduces unneeded latency and on very slow and
busy host it can fail.
Additionally the test starts again the same listener in the same
namespace on the same port, just after the previous connection
completed. Fast host can attempt starting the new server before the
old one really closed the socket.
Address the issues using the wait_local_port_listen helper and
explicitly waiting for the background listener process exit.
Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f8e8f6d44427d8c45e9f6a71ee1a321047452087.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paolo Abeni <pabeni@redhat.com>
Date: Fri Feb 2 17:06:59 2024 +0100
selftests: net: let big_tcp test cope with slow env
[ Upstream commit a19747c3b9bf6476cc36d0a3a5ef0ff92999169e ]
In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.
Address the issue using much larger write operations.
Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.
Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shigeru Yoshida <syoshida@redhat.com>
Date: Thu Feb 1 00:23:09 2024 +0900
tipc: Check the bearer type before calling tipc_udp_nl_bearer_add()
[ Upstream commit 3871aa01e1a779d866fa9dfdd5a836f342f4eb87 ]
syzbot reported the following general protection fault [1]:
general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087]
...
RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291
...
Call Trace:
<TASK>
tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646
tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367
netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.
tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.
This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().
Fixes: ef20cd4dd163 ("tipc: introduce UDP replicast")
Reported-and-tested-by: syzbot+5142b87a9abc510e14fa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5142b87a9abc510e14fa [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240131152310.4089541-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gerhard Engleder <gerhard@engleder-embedded.com>
Date: Wed Jan 31 21:14:13 2024 +0100
tsnep: Fix mapping for zero copy XDP_TX action
[ Upstream commit d7f5fb33cf77247b7bf9a871aaeea72ca4f51ad7 ]
For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is
done by xdp_convert_buff_to_frame(). The memory type of the resulting
xdp_frame depends on the memory type of the xdp_buff. For page pool
based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces
xdp_frame with memory type MEM_TYPE_PAGE_ORDER0.
tsnep_xdp_xmit_back() is not prepared for that and uses always the page
pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings
and the transmission of undefined data.
Improve tsnep_xdp_xmit_back() to use the generic buffer type
TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX.
Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Antoine Tenart <atenart@kernel.org>
Date: Thu Feb 1 09:38:15 2024 +0100
tunnels: fix out of bounds access when building IPv6 PMTU error
[ Upstream commit d75abeec401f8c86b470e7028a13fcdc87e5dd06 ]
If the ICMPv6 error is built from a non-linear skb we get the following
splat,
BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
Read of size 4 at addr ffff88811d402c80 by task netperf/820
CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
...
kasan_report+0xd8/0x110
do_csum+0x220/0x240
csum_partial+0xc/0x20
skb_tunnel_check_pmtu+0xeb9/0x3280
vxlan_xmit_one+0x14c2/0x4080
vxlan_xmit+0xf61/0x5c00
dev_hard_start_xmit+0xfb/0x510
__dev_queue_xmit+0x7cd/0x32a0
br_dev_queue_push_xmit+0x39d/0x6a0
Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs.
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Prashanth K <quic_prashk@quicinc.com>
Date: Tue Jan 16 11:28:15 2024 +0530
usb: dwc3: host: Set XHCI_SG_TRB_CACHE_SIZE_QUIRK
commit 817349b6d26aadd8b38283a05ce0bab106b4c765 upstream.
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. But the support for this quirk isn't present
in the DWC3 layer.
We will encounter this XHCI timeout/hung issue if we run iperf
loopback tests using RTL8156 ethernet adaptor on DWC3 targets
with scatter-gather enabled. This gets resolved after enabling
the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using
the xhci device property since its needed for DWC3 controller.
In Synopsys DWC3 databook,
Table 9-3: xHCI Debug Capability Limitations
Chained TRBs greater than TRB cache size: The debug capability
driver must not create a multi-TRB TD that describes smaller
than a 1K packet that spreads across 8 or more TRBs on either
the IN TR or the OUT TR.
Cc: stable@vger.kernel.org #5.11
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240116055816.1169821-2-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Date: Mon Jan 15 11:28:20 2024 +0200
usb: dwc3: pci: add support for the Intel Arrow Lake-H
commit de4b5b28c87ccae4da268a53c5df135437f5cfde upstream.
This patch adds the necessary PCI ID for Intel Arrow Lake-H
devices.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115092820.1454492-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Prashanth K <quic_prashk@quicinc.com>
Date: Tue Jan 16 11:28:16 2024 +0530
usb: host: xhci-plat: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRK
commit 520b391e3e813c1dd142d1eebb3ccfa6d08c3995 upstream.
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. Currently this quirk can only be set using
xhci private data. But there are some drivers like dwc3/host.c
which adds adds quirks using software node for xhci device.
Hence set this xhci quirk by iterating over device properties.
Cc: stable@vger.kernel.org # 5.11
Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20240116055816.1169821-3-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Leonard Dallmayr <leonard.dallmayr@mailbox.org>
Date: Fri Jan 5 13:35:51 2024 +0100
USB: serial: cp210x: add ID for IMST iM871A-USB
commit 12b17b4eb82a41977eb848048137b5908d52845c upstream.
The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB
Wireless M-Bus USB-adapter. It is used to read wireless water, gas and
electricity meters.
Signed-off-by: Leonard Dallmayr <leonard.dallmayr@mailbox.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Puliang Lu <puliang.lu@fibocom.com>
Date: Wed Jan 31 17:12:24 2024 +0800
USB: serial: option: add Fibocom FM101-GL variant
commit b4a1f4eaf1d798066affc6ad040f76eb1a16e1c9 upstream.
Update the USB serial option driver support for the Fibocom
FM101-GL
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)
0x01a3:mbim,gnss
Here are the outputs of usb-devices:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=01a3 Rev=05.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=5ccd5cd4
C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: JackBB Wu <wojackbb@gmail.com>
Date: Tue Jan 23 17:39:48 2024 +0800
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
commit 129690fb229a20b6e563a77a2c85266acecf20bc upstream.
Add support for Dell DW5826e with USB-id 0x413c:0x8217 & 0x413c:0x8218.
It is 0x413c:0x8217
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=413c ProdID=8217 Rev= 5.04
S: Manufacturer=DELL
S: Product=COMPAL Electronics EXM-G1A
S: SerialNumber=359302940050401
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=qcserial
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
It is 0x413c:0x8218
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=413c ProdID=8218 Rev= 0.00
S: Manufacturer=DELL
S: Product=COMPAL Electronics EXM-G1A
S: SerialNumber=359302940050401
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: JackBB Wu <wojackbb@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kees Cook <keescook@chromium.org>
Date: Fri Jan 26 14:31:53 2024 -0800
wifi: brcmfmac: Adjust n_channels usage for __counted_by
[ Upstream commit 5bdda0048c8d1bbe2019513b2d6200cc0d09c7bd ]
After commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by"), the compiler may enforce
dynamic array indexing of req->channels to stay below n_channels. As a
result, n_channels needs to be increased _before_ accessing the newly
added array index. Increment it first, then use "i" for the prior index.
Solves this warning in the coming GCC that has __counted_by support:
../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info':
../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req->
n_channels' may be undefined [-Wsequence-point]
3783 | req->channels[req->n_channels++] = chan;
| ~~~~~~~~~~~~~~~^~
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Ian Lin <ian.lin@infineon.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Hector Martin <marcan@marcan.st>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126223150.work.548-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Date: Thu Feb 1 16:17:39 2024 +0200
wifi: iwlwifi: exit eSR only after the FW does
[ Upstream commit 16867c38bcd3be2eb9016a3198a096f93959086e ]
Currently the driver exits eSR by calling
iwl_mvm_esr_mode_inactive() before updating the FW
(by deactivating one of the links), and therefore before
sending the EML frame notifying that we are no longer in eSR.
This is wrong for several reasons:
1. The driver sends SMPS activation frames when we are still in eSR
and SMPS should be disabled when in eSR
2. The driver restores RLC configuration as it was before eSR
entering, and RLC command shouldn't be sent in eSR
Fix this by calling iwl_mvm_esr_mode_inactive() after FW update
Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.d8d9dc277d4e.Ib5aee0fd05e35b1da7f18753eb3c8fa0a3f872f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Mon Jan 29 15:53:48 2024 +0100
wifi: mac80211: fix RCU use in TDLS fast-xmit
[ Upstream commit 9480adfe4e0f0319b9da04b44e4eebd5ad07e0cd ]
This looks up the link under RCU protection, but isn't
guaranteed to actually have protection. Fix that.
Fixes: 8cc07265b691 ("wifi: mac80211: handle TDLS data frames with MLO")
Link: https://msgid.link/20240129155348.8a9c0b1e1d89.I553f96ce953bb41b0b877d592056164dec20d01c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Wed Jan 31 16:48:56 2024 +0100
wifi: mac80211: fix waiting for beacons logic
[ Upstream commit a0b4f2291319c5d47ecb196b90400814fdcfd126 ]
This should be waiting if we don't have a beacon yet,
but somehow I managed to invert the logic. Fix that.
Fixes: 74e1309acedc ("wifi: mac80211: mlme: look up beacon elems only if needed")
Link: https://msgid.link/20240131164856.922701229546.I239b379e7cee04608e73c016b737a5245e5b23dd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ard Biesheuvel <ardb@kernel.org>
Date: Tue Jan 30 19:01:35 2024 +0100
x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR
[ Upstream commit 2f77465b05b1270c832b5e2ee27037672ad2a10a ]
The EFI stub's kernel placement logic randomizes the physical placement
of the kernel by taking all available memory into account, and picking a
region at random, based on a random seed.
When KASLR is disabled, this seed is set to 0x0, and this results in the
lowest available region of memory to be selected for loading the kernel,
even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is
typically reserved for the GFP_DMA region, to accommodate masters that
can only access the first 16 MiB of system memory.
Even if such devices are rare these days, we may still end up with a
warning in the kernel log, as reported by Tom:
swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
Fix this by tweaking the random allocation logic to accept a low bound
on the placement, and set it to LOAD_PHYSICAL_ADDR.
Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Reported-by: Tom Englund <tomenglund26@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218404
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ard Biesheuvel <ardb@kernel.org>
Date: Fri Jan 26 12:14:30 2024 +0100
x86/efistub: Give up if memory attribute protocol returns an error
[ Upstream commit a7a6a01f88e87dec4bf2365571dd2dc7403d52d0 ]
The recently introduced EFI memory attributes protocol should be used
if it exists to ensure that the memory allocation created for the kernel
permits execution. This is needed for compatibility with tightened
requirements related to Windows logo certification for x86 PCs.
Currently, we simply strip the execute protect (XP) attribute from the
entire range, but this might be rejected under some firmware security
policies, and so in a subsequent patch, this will be changed to only
strip XP from the executable region that runs early, and make it
read-only (RO) as well.
In order to catch any issues early, ensure that the memory attribute
protocol works as intended, and give up if it produces spurious errors.
Note that the DXE services based fallback was always based on best
effort, so don't propagate any errors returned by that API.
Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Mon Jan 29 14:38:42 2024 +0800
x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
commit 8eed4e00a370b37b4e5985ed983dccedd555ea9d upstream.
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ]
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Long Li <leo.lilong@huawei.com>
Date: Thu Feb 8 15:20:45 2024 -0800
xfs: abort intent items when recovery intents fail
commit f8f9d952e42dd49ae534f61f2fa7ca0876cb9848 upstream.
When recovering intents, we capture newly created intent items as part of
committing recovered intent items. If intent recovery fails at a later
point, we forget to remove those newly created intent items from the AIL
and hang:
[root@localhost ~]# cat /proc/539/stack
[<0>] xfs_ail_push_all_sync+0x174/0x230
[<0>] xfs_unmount_flush_inodes+0x8d/0xd0
[<0>] xfs_mountfs+0x15f7/0x1e70
[<0>] xfs_fs_fill_super+0x10ec/0x1b20
[<0>] get_tree_bdev+0x3c8/0x730
[<0>] vfs_get_tree+0x89/0x2c0
[<0>] path_mount+0xecf/0x1800
[<0>] do_mount+0xf3/0x110
[<0>] __x64_sys_mount+0x154/0x1f0
[<0>] do_syscall_64+0x39/0x80
[<0>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
When newly created intent items fail to commit via transaction, intent
recovery hasn't created done items for these newly created intent items,
so the capture structure is the sole owner of the captured intent items.
We must release them explicitly or else they leak:
unreferenced object 0xffff888016719108 (size 432):
comm "mount", pid 529, jiffies 4294706839 (age 144.463s)
hex dump (first 32 bytes):
08 91 71 16 80 88 ff ff 08 91 71 16 80 88 ff ff ..q.......q.....
18 91 71 16 80 88 ff ff 18 91 71 16 80 88 ff ff ..q.......q.....
backtrace:
[<ffffffff8230c68f>] xfs_efi_init+0x18f/0x1d0
[<ffffffff8230c720>] xfs_extent_free_create_intent+0x50/0x150
[<ffffffff821b671a>] xfs_defer_create_intents+0x16a/0x340
[<ffffffff821bac3e>] xfs_defer_ops_capture_and_commit+0x8e/0xad0
[<ffffffff82322bb9>] xfs_cui_item_recover+0x819/0x980
[<ffffffff823289b6>] xlog_recover_process_intents+0x246/0xb70
[<ffffffff8233249a>] xlog_recover_finish+0x8a/0x9a0
[<ffffffff822eeafb>] xfs_log_mount_finish+0x2bb/0x4a0
[<ffffffff822c0f4f>] xfs_mountfs+0x14bf/0x1e70
[<ffffffff822d1f80>] xfs_fs_fill_super+0x10d0/0x1b20
[<ffffffff81a21fa2>] get_tree_bdev+0x3d2/0x6d0
[<ffffffff81a1ee09>] vfs_get_tree+0x89/0x2c0
[<ffffffff81a9f35f>] path_mount+0xecf/0x1800
[<ffffffff81a9fd83>] do_mount+0xf3/0x110
[<ffffffff81aa00e4>] __x64_sys_mount+0x154/0x1f0
[<ffffffff83968739>] do_syscall_64+0x39/0x80
Fix the problem above by abort intent items that don't have a done item
when recovery intents fail.
Fixes: e6fff81e4870 ("xfs: proper replay of deferred ops queued during log recovery")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Catherine Hoang <catherine.hoang@oracle.com>
Date: Thu Feb 8 15:20:43 2024 -0800
xfs: allow read IO and FICLONE to run concurrently
commit 14a537983b228cb050ceca3a5b743d01315dc4aa upstream.
One of our VM cluster management products needs to snapshot KVM image
files so that they can be restored in case of failure. Snapshotting is
done by redirecting VM disk writes to a sidecar file and using reflink
on the disk image, specifically the FICLONE ioctl as used by
"cp --reflink". Reflink locks the source and destination files while it
operates, which means that reads from the main vm disk image are blocked,
causing the vm to stall. When an image file is heavily fragmented, the
copy process could take several minutes. Some of the vm image files have
50-100 million extent records, and duplicating that much metadata locks
the file for 30 minutes or more. Having activities suspended for such
a long time in a cluster node could result in node eviction.
Clone operations and read IO do not change any data in the source file,
so they should be able to run concurrently. Demote the exclusive locks
taken by FICLONE to shared locks to allow reads while cloning. While a
clone is in progress, writes will take the IOLOCK_EXCL, so they block
until the clone completes.
Link: https://lore.kernel.org/linux-xfs/8911B94D-DD29-4D6E-B5BC-32EAF1866245@oracle.com/
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Darrick J. Wong <djwong@kernel.org>
Date: Thu Feb 8 15:20:35 2024 -0800
xfs: bump max fsgeom struct version
commit 9488062805943c2d63350d3ef9e4dc093799789a upstream.
The latest version of the fs geometry structure is v5. Bump this
constant so that xfs_db and mkfs calls to libxfs_fs_geometry will fill
out all the fields.
IOWs, this commit is a no-op for the kernel, but will be useful for
userspace reporting in later changes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Darrick J. Wong <djwong@kernel.org>
Date: Thu Feb 8 15:20:51 2024 -0800
xfs: clean up dqblk extraction
commit ed17f7da5f0c8b65b7b5f7c98beb0aadbc0546ee upstream.
Since the introduction of xfs_dqblk in V5, xfs really ought to find the
dqblk pointer from the dquot buffer, then compute the xfs_disk_dquot
pointer from the dqblk pointer. Fix the open-coded xfs_buf_offset calls
and do the type checking in the correct order.
Note that this has made no practical difference since the start of the
xfs_disk_dquot is coincident with the start of the xfs_dqblk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christoph Hellwig <hch@lst.de>
Date: Thu Feb 8 15:20:53 2024 -0800
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
commit c421df0b19430417a04f68919fc3d1943d20ac04 upstream.
Introduce a local boolean variable if FS_XFLAG_REALTIME to make the
checks for it more obvious, and de-densify a few of the conditionals
using it to make them more readable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-4-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Darrick J. Wong <djwong@kernel.org>
Date: Thu Feb 8 15:20:52 2024 -0800
xfs: dquot recovery does not validate the recovered dquot
commit 9c235dfc3d3f901fe22acb20f2ab37ff39f2ce02 upstream.
When we're recovering ondisk quota records from the log, we need to
validate the recovered buffer contents before writing them to disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Long Li <leo.lilong@huawei.com>
Date: Thu Feb 8 15:20:44 2024 -0800
xfs: factor out xfs_defer_pending_abort
commit 2a5db859c6825b5d50377dda9c3cc729c20cad43 upstream.
Factor out xfs_defer_pending_abort() from xfs_defer_trans_abort(), which
not use transaction parameter, so it can be used after the transaction
life cycle.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anthony Iliopoulos <ailiop@suse.com>
Date: Thu Feb 8 15:20:49 2024 -0800
xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS
commit a2e4388adfa44684c7c428a5a5980efe0d75e13e upstream.
Commit 57c0f4a8ea3a attempted to fix the select in the kconfig entry
XFS_ONLINE_SCRUB_STATS by selecting XFS_DEBUG, but the original
intention was to select DEBUG_FS, since the feature relies on debugfs to
export the related scrub statistics.
Fixes: 57c0f4a8ea3a ("xfs: fix select in config XFS_ONLINE_SCRUB_STATS")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Omar Sandoval <osandov@fb.com>
Date: Thu Feb 8 15:20:48 2024 -0800
xfs: fix internal error from AGFL exhaustion
commit f63a5b3769ad7659da4c0420751d78958ab97675 upstream.
We've been seeing XFS errors like the following:
XFS: Internal error i != 1 at line 3526 of file fs/xfs/libxfs/xfs_btree.c. Caller xfs_btree_insert+0x1ec/0x280
...
Call Trace:
xfs_corruption_error+0x94/0xa0
xfs_btree_insert+0x221/0x280
xfs_alloc_fixup_trees+0x104/0x3e0
xfs_alloc_ag_vextent_size+0x667/0x820
xfs_alloc_fix_freelist+0x5d9/0x750
xfs_free_extent_fix_freelist+0x65/0xa0
__xfs_free_extent+0x57/0x180
...
This is the XFS_IS_CORRUPT() check in xfs_btree_insert() when
xfs_btree_insrec() fails.
After converting this into a panic and dissecting the core dump, I found
that xfs_btree_insrec() is failing because it's trying to split a leaf
node in the cntbt when the AG free list is empty. In particular, it's
failing to get a block from the AGFL _while trying to refill the AGFL_.
If a single operation splits every level of the bnobt and the cntbt (and
the rmapbt if it is enabled) at once, the free list will be empty. Then,
when the next operation tries to refill the free list, it allocates
space. If the allocation does not use a full extent, it will need to
insert records for the remaining space in the bnobt and cntbt. And if
those new records go in full leaves, the leaves (and potentially more
nodes up to the old root) need to be split.
Fix it by accounting for the additional splits that may be required to
refill the free list in the calculation for the minimum free list size.
P.S. As far as I can tell, this bug has existed for a long time -- maybe
back to xfs-history commit afdf80ae7405 ("Add XFS_AG_MAXLEVELS macros
...") in April 1994! It requires a very unlucky sequence of events, and
in fact we didn't hit it until a particular sparse mmap workload updated
from 5.12 to 5.19. But this bug existed in 5.12, so it must've been
exposed by some other change in allocation or writeback patterns. It's
also much less likely to be hit with the rmapbt enabled, since that
increases the minimum free list size and is unlikely to split at the
same time as the bnobt and cntbt.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Darrick J. Wong <djwong@kernel.org>
Date: Thu Feb 8 15:20:39 2024 -0800
xfs: fix units conversion error in xfs_bmap_del_extent_delay
commit ddd98076d5c075c8a6c49d9e6e8ee12844137f23 upstream.
The unit conversions in this function do not make sense. First we
convert a block count to bytes, then divide that bytes value by
rextsize, which is in blocks, to get an rt extent count. You can't
divide bytes by blocks to get a (possibly multiblock) extent value.
Fortunately nobody uses delalloc on the rt volume so this hasn't
mattered.
Fixes: fa5c836ca8eb5 ("xfs: refactor xfs_bunmapi_cow")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christoph Hellwig <hch@lst.de>
Date: Thu Feb 8 15:20:42 2024 -0800
xfs: handle nimaps=0 from xfs_bmapi_write in xfs_alloc_file_space
commit 35dc55b9e80cb9ec4bcb969302000b002b2ed850 upstream.
If xfs_bmapi_write finds a delalloc extent at the requested range, it
tries to convert the entire delalloc extent to a real allocation.
But if the allocator cannot find a single free extent large enough to
cover the start block of the requested range, xfs_bmapi_write will
return 0 but leave *nimaps set to 0.
In that case we simply need to keep looping with the same startoffset_fsb
so that one of the following allocations will eventually reach the
requested range.
Note that this could affect any caller of xfs_bmapi_write that covers
an existing delayed allocation. As far as I can tell we do not have
any other such caller, though - the regular writeback path uses
xfs_bmapi_convert_delalloc to convert delayed allocations to real ones,
and direct I/O invalidates the page cache first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Darrick J. Wong <djwong@kernel.org>
Date: Thu Feb 8 15:20:36 2024 -0800
xfs: hoist freeing of rt data fork extent mappings
commit 6c664484337b37fa0cf6e958f4019623e30d40f7 upstream.
Currently, xfs_bmap_del_extent_real contains a bunch of code to convert
the physical extent of a data fork mapping for a realtime file into rt
extents and pass that to the rt extent freeing function. Since the
details of this aren't needed when CONFIG_XFS_REALTIME=n, move it to
xfs_rtbitmap.c to reduce code size when realtime isn't enabled.
This will (one day) enable realtime EFIs to reuse the same
unit-converting call with less code duplication.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Chinner <dchinner@redhat.com>
Date: Thu Feb 8 15:20:50 2024 -0800
xfs: inode recovery does not validate the recovered inode
commit 038ca189c0d2c1570b4d922f25b524007c85cf94 upstream.
Discovered when trying to track down a weird recovery corruption
issue that wasn't detected at recovery time.
The specific corruption was a zero extent count field when big
extent counts are in use, and it turns out the dinode verifier
doesn't detect that specific corruption case, either. So fix it too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cheng Lin <cheng.lin130@zte.com.cn>
Date: Thu Feb 8 15:20:41 2024 -0800
xfs: introduce protection for drop nlink
commit 2b99e410b28f5a75ae417e6389e767c7745d6fce upstream.
When abnormal drop_nlink are detected on the inode,
return error, to avoid corruption propagation.
Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Darrick J. Wong <djwong@kernel.org>
Date: Thu Feb 8 15:20:40 2024 -0800
xfs: make sure maxlen is still congruent with prod when rounding down
commit f6a2dae2a1f52ea23f649c02615d073beba4cc35 upstream.
In commit 2a6ca4baed62, we tried to fix an overflow problem in the
realtime allocator that was caused by an overly large maxlen value
causing xfs_rtcheck_range to run off the end of the realtime bitmap.
Unfortunately, there is a subtle bug here -- maxlen (and minlen) both
have to be aligned with @prod, but @prod can be larger than 1 if the
user has set an extent size hint on the file, and that extent size hint
is larger than the realtime extent size.
If the rt free space extents are not aligned to this file's extszhint
because other files without extent size hints allocated space (or the
number of rt extents is similarly not aligned), then it's possible that
maxlen after clamping to sb_rextents will no longer be aligned to prod.
The allocation will succeed just fine, but we still trip the assertion.
Fix the problem by reducing maxlen by any misalignment with prod. While
we're at it, split the assertions into two so that we can tell which
value had the bad alignment.
Fixes: 2a6ca4baed62 ("xfs: make sure the rt allocator doesn't run off the end")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christoph Hellwig <hch@lst.de>
Date: Thu Feb 8 15:20:46 2024 -0800
xfs: only remap the written blocks in xfs_reflink_end_cow_extent
commit 55f669f34184ecb25b8353f29c7f6f1ae5b313d1 upstream.
xfs_reflink_end_cow_extent looks up the COW extent and the data fork
extent at offset_fsb, and then proceeds to remap the common subset
between the two.
It does however not limit the remapped extent to the passed in
[*offset_fsbm end_fsb] range and thus potentially remaps more blocks than
the one handled by the current I/O completion. This means that with
sufficiently large data and COW extents we could be remapping COW fork
mappings that have not been written to, leading to a stale data exposure
on a powerfail event.
We use to have a xfs_trim_range to make the remap fit the I/O completion
range, but that got (apparently accidentally) removed in commit
df2fd88f8ac7 ("xfs: rewrite xfs_reflink_end_cow to use intents").
Note that I've only found this by code inspection, and a test case would
probably require very specific delay and error injection.
Fixes: df2fd88f8ac7 ("xfs: rewrite xfs_reflink_end_cow to use intents")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Darrick J. Wong <djwong@kernel.org>
Date: Thu Feb 8 15:20:37 2024 -0800
xfs: prevent rt growfs when quota is enabled
commit b73494fa9a304ab95b59f07845e8d7d36e4d23e0 upstream.
Quotas aren't (yet) supported with realtime, so we shouldn't allow
userspace to set up a realtime section when quotas are enabled, even if
they attached one via mount options. IOWS, you shouldn't be able to do:
# mkfs.xfs -f /dev/sda
# mount /dev/sda /mnt -o rtdev=/dev/sdb,usrquota
# xfs_growfs -r /mnt
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christoph Hellwig <hch@lst.de>
Date: Thu Feb 8 15:20:54 2024 -0800
xfs: respect the stable writes flag on the RT device
commit 9c04138414c00ae61421f36ada002712c4bac94a upstream.
Update the per-folio stable writes flag dependening on which device an
inode resides on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-5-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Darrick J. Wong <djwong@kernel.org>
Date: Thu Feb 8 15:20:38 2024 -0800
xfs: rt stubs should return negative errnos when rt disabled
commit c2988eb5cff75c02bc57e02c323154aa08f55b78 upstream.
When realtime support is not compiled into the kernel, these functions
should return negative errnos, not positive errnos. While we're at it,
fix a broken macro declaration.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leah Rumancik <leah.rumancik@gmail.com>
Date: Thu Feb 8 15:20:47 2024 -0800
xfs: up(ic_sema) if flushing data device fails
commit 471de20303dda0b67981e06d59cc6c4a83fd2a3c upstream.
We flush the data device cache before we issue external log IO. If
the flush fails, we shut down the log immediately and return. However,
the iclog->ic_sema is left in a decremented state so let's add an up().
Prior to this patch, xfs/438 would fail consistently when running with
an external log device:
sync
-> xfs_log_force
-> xlog_write_iclog
-> down(&iclog->ic_sema)
-> blkdev_issue_flush (fail causes us to intiate shutdown)
-> xlog_force_shutdown
-> return
unmount
-> xfs_log_umount
-> xlog_wait_iclog_completion
-> down(&iclog->ic_sema) --------> HANG
There is a second early return / shutdown. Make sure the up() happens
for it as well. Also make sure we cleanup the iclog state,
xlog_state_done_syncing, before dropping the iclog lock.
Fixes: b5d721eaae47 ("xfs: external logs need to flush data device")
Fixes: 842a42d126b4 ("xfs: shutdown on failure to add page to log bio")
Fixes: 7d839e325af2 ("xfs: check return codes when flushing block devices")
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Pecio <michal.pecio@gmail.com>
Date: Thu Jan 25 17:27:37 2024 +0200
xhci: handle isoc Babble and Buffer Overrun events properly
commit 7c4650ded49e5b88929ecbbb631efb8b0838e811 upstream.
xHCI 4.9 explicitly forbids assuming that the xHC has released its
ownership of a multi-TRB TD when it reports an error on one of the
early TRBs. Yet the driver makes such assumption and releases the TD,
allowing the remaining TRBs to be freed or overwritten by new TDs.
The xHC should also report completion of the final TRB due to its IOC
flag being set by us, regardless of prior errors. This event cannot
be recognized if the TD has already been freed earlier, resulting in
"Transfer event TRB DMA ptr not part of current TD" error message.
Fix this by reusing the logic for processing isoc Transaction Errors.
This also handles hosts which fail to report the final completion.
Fix transfer length reporting on Babble errors. They may be caused by
device malfunction, no guarantee that the buffer has been filled.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240125152737.2983959-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mathias Nyman <mathias.nyman@linux.intel.com>
Date: Thu Jan 25 17:27:36 2024 +0200
xhci: process isoc TD properly when there was a transaction error mid TD.
commit 5372c65e1311a16351ef03dd096ff576e6477674 upstream.
The last TRB of a isoc TD might not trigger an event if there was
an error event for a TRB mid TD. This is seen on a NEC Corporation
uPD720200 USB 3.0 Host
After an error mid a multi-TRB TD the xHC should according to xhci 4.9.1
generate events for passed TRBs with IOC flag set if it proceeds to the
next TD. This event is either a copy of the original error, or a
"success" transfer event.
If that event is missing then the driver and xHC host get out of sync as
the driver is still expecting a transfer event for that first TD, while
xHC host is already sending events for the next TD in the list.
This leads to
"Transfer event TRB DMA ptr not part of current TD" messages.
As a solution we tag the isoc TDs that get error events mid TD.
If an event doesn't match the first TD, then check if the tag is
set, and event points to the next TD.
In that case give back the fist TD and process the next TD normally
Make sure TD status and transferred length stay valid in both cases
with and without final TD completion event.
Reported-by: Michał Pecio <michal.pecio@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20240112235205.1259f60c@foxbook/
Tested-by: Michał Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240125152737.2983959-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>