The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

atomic_cmpset (9)
  • >> atomic_cmpset (9) ( FreeBSD man: Ядро )

  • BSD mandoc
     

    NAME

    atomic_add
    
     
    atomic_clear
    
     
    atomic_cmpset
    
     
    atomic_fetchadd
    
     
    atomic_load
    
     
    atomic_readandclear
    
     
    atomic_set
    
     
    atomic_subtract
    
     
    atomic_store
    
     - atomic operations
    
     
    

    SYNOPSIS

       #include <sys/types.h>
       #include <machine/atomic.h>
    void atomic_add_ ([acq_|rel_]<type> volatile <type> *p <type> v);
    void atomic_clear_ ([acq_|rel_]<type> volatile <type> *p <type> v);
    int Fo atomic_cmpset_[acq_|rel_]<type> Fa volatile <type> *dst Fa <type> old Fa <type> new Fc Ft <type> atomic_fetchadd_ (<type> volatile <type> *p <type> v);
    <type> atomic_load_acq_ (<type> volatile <type> *p);
    <type> atomic_readandclear_ (<type> volatile <type> *p);
    void atomic_set_ ([acq_|rel_]<type> volatile <type> *p <type> v);
    void atomic_subtract_ ([acq_|rel_]<type> volatile <type> *p <type> v);
    void atomic_store_rel_ (<type> volatile <type> *p <type> v);
     

    DESCRIPTION

    Each of the atomic operations is guaranteed to be atomic in the presence of interrupts. They can be used to implement reference counts or as building blocks for more advanced synchronization primitives such as mutexes.  

    Types

    Each atomic operation operates on a specific Fa type . The type to use is indicated in the function name. The available types that can be used are:

    int
    unsigned integer
    long
    unsigned long integer
    ptr
    unsigned integer the size of a pointer
    32
    unsigned 32-bit integer
    64
    unsigned 64-bit integer

    For example, the function to atomically add two integers is called atomic_add_int (.);

    Certain architectures also provide operations for types smaller than ``int ''

    char
    unsigned character
    short
    unsigned short integer
    8
    unsigned 8-bit integer
    16
    unsigned 16-bit integer

    These must not be used in MI code because the instructions to implement them efficiently may not be available.  

    Memory Barriers

    Memory barriers are used to guarantee the order of data accesses in two ways. First, they specify hints to the compiler to not re-order or optimize the operations. Second, on architectures that do not guarantee ordered data accesses, special instructions or special variants of instructions are used to indicate to the processor that data accesses need to occur in a certain order. As a result, most of the atomic operations have three variants in order to include optional memory barriers. The first form just performs the operation without any explicit barriers. The second form uses a read memory barrier, and the third variant uses a write memory barrier.

    The second variant of each operation includes a read memory barrier. This barrier ensures that the effects of this operation are completed before the effects of any later data accesses. As a result, the operation is said to have acquire semantics as it acquires a pseudo-lock requiring further operations to wait until it has completed. To denote this, the suffix ``_acq '' is inserted into the function name immediately prior to the ``_ Aq Fa type '' suffix. For example, to subtract two integers ensuring that any later writes will happen after the subtraction is performed, use atomic_subtract_acq_int (.);

    The third variant of each operation includes a write memory barrier. This ensures that all effects of all previous data accesses are completed before this operation takes place. As a result, the operation is said to have release semantics as it releases any pending data accesses to be completed before its operation is performed. To denote this, the suffix ``_rel '' is inserted into the function name immediately prior to the ``_ Aq Fa type '' suffix. For example, to add two long integers ensuring that all previous writes will happen first, use atomic_add_rel_long (.);

    A practical example of using memory barriers is to ensure that data accesses that are protected by a lock are all performed while the lock is held. To achieve this, one would use a read barrier when acquiring the lock to guarantee that the lock is held before any protected operations are performed. Finally, one would use a write barrier when releasing the lock to ensure that all of the protected operations are completed before the lock is released.  

    Multiple Processors

    The current set of atomic operations do not necessarily guarantee atomicity across multiple processors. To guarantee atomicity across processors, not only does the individual operation need to be atomic on the processor performing the operation, but the result of the operation needs to be pushed out to stable storage and the caches of all other processors on the system need to invalidate any cache lines that include the affected memory region. On the i386 architecture, the cache coherency model requires that the hardware perform this task, thus the atomic operations are atomic across multiple processors. On the ia64 architecture, coherency is only guaranteed for pages that are configured to using a caching policy of either uncached or write back.  

    Semantics

    This section describes the semantics of each operation using a C like notation.

    Fn atomic_add p v
    *p += v;
    
    Fn atomic_clear p v
    *p &= ~v;
    
    Fn atomic_cmpset dst old new
    if (*dst == old) {
            *dst = new;
            return 1;
    } else
            return 0;
    

    The atomic_cmpset ();
    functions are not implemented for the types ``char '' ``short '' ``8 '' and ``16 ''

    Fn atomic_fetchadd p v
    tmp = *p;
    *p += v;
    return tmp;
    

    The atomic_fetchadd ();
    functions are only implemented for the types ``int '' and ``32 '' and do not have any variants with memory barriers at this time.

    Fn atomic_load addr
    return (*addr)
    

    The atomic_load ();
    functions always have acquire semantics.

    Fn atomic_readandclear addr
    temp = *addr;
    *addr = 0;
    return (temp);
    

    The atomic_readandclear ();
    functions are not implemented for the types ``char '' ``short '' ``ptr '' ``8 '' and ``16 '' and do not have any variants with memory barriers at this time.

    Fn atomic_set p v
    *p |= v;
    
    Fn atomic_subtract p v
    *p -= v;
    
    Fn atomic_store p v
    *p = v;
    

    The atomic_store ();
    functions always have release semantics.

    The type ``64 '' is currently not implemented for any of the atomic operations on the arm i386 and powerpc architectures.  

    RETURN VALUES

    The atomic_cmpset ();
    function returns the result of the compare operation. The atomic_fetchadd (,);
    atomic_load (,);
    and atomic_readandclear ();
    functions return the value at the specified address.  

    EXAMPLES

    This example uses the atomic_cmpset_acq_ptr ();
    and atomic_set_ptr ();
    functions to obtain a sleep mutex and handle recursion. Since the mtx_lock member of a Vt struct mtx is a pointer, the ``ptr '' type is used.
    /* Try to obtain mtx_lock once. */
    #define _obtain_lock(mp, tid)                                           \
            atomic_cmpset_acq_ptr(&(mp)->mtx_lock, MTX_UNOWNED, (tid))
    
    /* Get a sleep lock, deal with recursion inline. */
    #define _get_sleep_lock(mp, tid, opts, file, line) do {                 \
            uintptr_t _tid = (uintptr_t)(tid);                              \
                                                                            \
            if (!_obtain_lock(mp, tid)) {                                   \
                    if (((mp)->mtx_lock & MTX_FLAGMASK) != _tid)            \
                            _mtx_lock_sleep((mp), _tid, (opts), (file), (line));\
                    else {                                                  \
                            atomic_set_ptr(&(mp)->mtx_lock, MTX_RECURSE);   \
                            (mp)->mtx_recurse++;                            \
                    }                                                       \
            }                                                               \
    } while (0)
    
     

    HISTORY

    The atomic_add (,);
    atomic_clear (,);
    atomic_set (,);
    and atomic_subtract ();
    operations were first introduced in Fx 3.0 . This first set only supported the types ``char '' ``short '' ``int '' and ``long '' The atomic_cmpset (,);
    atomic_load (,);
    atomic_readandclear (,);
    and atomic_store ();
    operations were added in Fx 5.0 . The types ``8 '' ``16 '' ``32 '' ``64 '' and ``ptr '' and all of the acquire and release variants were added in Fx 5.0 as well. The atomic_fetchadd ();
    operations were added in Fx 6.0 .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Types
    Memory Barriers
    Multiple Processors
    Semantics
    RETURN VALUES
    EXAMPLES
    HISTORY


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру