The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

auditd.conf (5)
  • auditd.conf (5) ( Русские man: Форматы файлов )
  • >> auditd.conf (5) ( Linux man: Форматы файлов )
  •  

    NAME

    auditd.conf - audit daemon configuration file
     
    

    DESCRIPTION

    The file /etc/audit/auditd.conf contains configuration information specific to the audit daemon. It should contain one configuration keyword per line, an equal sign, and then followed by appropriate configuration information. The keywords recognized are: log_file, log_format, flush, freq, num_logs, max_log_file, max_log_file_action, space_left, action_mail_acct, space_left_action, admin_space_left, admin_space_left_action, disk_full_action, and disk_error_action. These keywords are described below.

    log_file
    This keyword specifies the full path name to the log file where audit records will be stored. It must be a regular file.
    log_format
    The log format describes how the information should be stored on disk. There are 2 options: raw and nolog. If set to RAW, the audit records will be stored in a format exactly as the kernel sends it. If this option is set to NOLOG then all audit information is discarded instead of writing to disk. This mode does not affect data sent to the audit event dispatcher.
    priority_boost
    This is a non-negative number that tells the audit damon how much of a priority boost it should take. The default is 3. No change is 0.
    flush
    Valid values are none, incremental, data, and sync. If set to none, no special effort is made to flush the audit records to disk. If set to incremental, Then the freq parameter is used to determine how often an explicit flush to disk is issued. The data parameter tells the audit damon to keep the data portion of the disk file sync'd at all times. The sync option tells the audit daemon to keep both the data and meta-data fully sync'd with every write to disk.
    freq
    This is a non-negative number that tells the audit damon how many records to write before issuing an explicit flush to disk command. this value is only valid when the flush keyword is set to incremental.
    num_logs
    This keyword specifies the number of log files to keep if rotate is given as the max_log_file_action. If the number is < 2, logs are not rotated. This number must be 99 or less. The default is 0 - which means no rotation. As you increase the number of log files being rotated, you may need to adjust the kernel backlog setting upwards since it takes more time to rotate the files. This is typically done in /etc/audit/audit.rules.
    dispatcher
    The dispatcher is a program that is started by the audit daemon when it starts up. It will pass a copy of all audit events to that application's stdin. Make sure you trust the application that you add to this line since it runs with root privileges.
    disp_qos
    This option controls whether you want blocking/lossless or non-blocking/lossy communication between the audit daemon and the dispatcher. There is a 128k buffer between the audit daemon and dispatcher. This is good enogh for most uses. If lossy is chosen, incoming events going to the dispatcher are discarded when this queue is full. (Events are still written to disk if log_format is not nolog.) Otherwise the auditd daemon will wait for the queue to have an empty spot before logging to disk. The risk is that while the daemon is waiting for network IO, an event is not being recorded to disk. Valid values are: lossy and lossless. Lossy is the default value.
    max_log_file
    This keyword specifies the maximum file size in megabytes. When this limit is reached, it will trigger a configurable action. The value given must be numeric.
    max_log_file_action
    This parameter tells the system what action to take when the system has detected that the max file size limit has been reached. Valid values are ignore, syslog, suspend, rotate and keep_logs. If set to ignore, the audit daemon does nothing. syslog means that it will issue a warning to syslog. suspend will cause the audit daemon to stop writing records to the disk. The daemon will still be alive. The rotate option will cause the audit daemon to rotate the logs. It should be noted that logs with higher numbers are older than logs with lower numbers. This is the same convention used by the logrotate utility. The keep_logs option is similar to rotate except it does not use the num_logs setting. This prevents audit logs from being overwritten.
    action_mail_acct
    This option should contain a valid email address or alias. The default address is root. If the email address is not local to the machine, you must make sure you have email properly configured on your machine and network. Also, this option requires that /usr/lib/sendmail exists on the machine.
    space_left
    This is a numeric value in megabytes that tells the audit daemon when to perform a configurable action because the system is starting to run low on disk space.
    space_left_action
    This parameter tells the system what action to take when the system has detected that it is starting to get low on disk space. Valid values are ignore, syslog, email, exec, suspend, single, and halt. If set to ignore, the audit daemon does nothing. syslog means that it will issue a warning to syslog. Email means that it will send a warning to the email account specified in action_mail_acct as well as sending the message to syslog. exec /path-to-script will execute the script. You cannot pass parameters to the script. suspend will cause the audit daemon to stop writing records to the disk. The daemon will still be alive. The single option will cause the audit daemon to put the computer system in single user mode. halt option will cause the audit daemon to shutdown the computer system.
    admin_space_left
    This is a numeric value in megabytes that tells the audit daemon when to perform a configurable action because the system is running low on disk space. This should be considered the last chance to do something before running out of disk space. The numeric value for this parameter should be lower than the number for space_left.
    admin_space_left_action
    This parameter tells the system what action to take when the system has detected that it is low on disk space. Valid values are ignore, syslog, email, exec, suspend, single, and halt. If set to ignore, the audit daemon does nothing. Syslog means that it will issue a warning to syslog. Email means that it will send a warning to the email account specified in action_mail_acct as well as sending the message to syslog. exec /path-to-script will execute the script. You cannot pass parameters to the script. Suspend will cause the audit daemon to stop writing records to the disk. The daemon will still be alive. The single option will cause the audit daemon to put the computer system in single user mode. halt
    disk_full_action
    This parameter tells the system what action to take when the system has detected that the partition to which log files are written has become full. Valid values are ignore, syslog, exec, suspend, single, and halt. If set to ignore, the audit daemon does nothing. Syslog means that it will issue a warning to syslog. exec /path-to-script will execute the script. You cannot pass parameters to the script. Suspend will cause the audit daemon to stop writing records to the disk. The daemon will still be alive. The single option will cause the audit daemon to put the computer system in single user mode. halt option will cause the audit daemon to shutdown the computer system.
    disk_error_action
    This parameter tells the system what action to take whenever there is an error detected when writing audit events to disk or rotating logs. Valid values are ignore, syslog, exec, suspend, single, and halt. If set to ignore, the audit daemon does nothing. Syslog means that it will issue a warning to syslog. exec /path-to-script will execute the script. You cannot pass parameters to the script. Suspend will cause the audit daemon to stop writing records to the disk. The daemon will still be alive. The single option will cause the audit daemon to put the computer system in single user mode. halt option will cause the audit daemon to shutdown the computer system.

     

    NOTES

    In a CAPP environment, the audit trail is considered so important that access to system resources must be denied if an audit trail cannot be created. In this environment, it would be suggested that /var/log/audit be on its own partition. This is to ensure that space detection is accurate and that no other process comes along and consumes part of it.

    The flush parameter should be set to sync or data.

    Max_log_file and num_logs need to be adjusted so that you get complete use of your partition. It should be noted that the more files that have to be rotated, the longer it takes to get back to receiving audit events. Max_log_file_action should be set to keep_logs.

    Space_left should be set to a number that gives the admin enough time to react to any alert message and perform some maintenance to free up disk space. This would typically involve running the aureport -t report and moving the oldest logs to an archive area. The value of space_left is site dependant since the rate at which events are generated varies with each deployment. The space_left_action is recommended to be set to email. If you need something like an snmp trap, you can use the exec option to send one.

    Admin_space_left should be set to the amount of disk space on the audit partition needed for admin actions to be recorded. Admin_space_left_action would be set to single so that use of the machine is restricted to just the console.

    The disk_full_action is triggered when no more room exists on the partition. All access should be terminated since no more audit capability exists. This can be set to either single or halt.

    The disk_error_action should be set to syslog, single, or halt depending on your local policies regarding handling of hardware malfunctions.

     

    FILES

    /etc/audit/auditd.conf
    Audit daemon configuration file

     

    SEE ALSO

    auditd(8).

     

    AUTHOR

    Steve Grubb


     

    Index

    NAME
    DESCRIPTION
    NOTES
    FILES
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру