Интерактивная система просмотра системных руководств (man-ов)
ixgb (4)
>> ixgb (4) ( FreeBSD man: Специальные файлы /dev/* )
ixgb (7) ( Solaris man: Макропакеты и соглашения )
BSD mandoc
NAME
ixgb
- Intel(R) PRO/10GbE Ethernet driver for the FreeBSD operating system
SYNOPSIS
To compile this driver into the kernel,
place the following line in your
kernel configuration file:
device ixgb
Alternatively, to load the driver as a
module at boot time, place the following line in
loader.conf5:
if_ixgb_load="YES"
DESCRIPTION
The
driver provides support for PCI Gigabit Ethernet adapters based on
the Intel 82597EX Ethernet controller chips.
The driver supports Transmit/Receive checksum offload
and Jumbo Frames.
For questions related to hardware requirements,
refer to the documentation supplied with your Intel PRO/10GbE adapter.
All hardware requirements listed apply to use with
Fx .
Support for Jumbo Frames is provided via the interface MTU setting.
Selecting an MTU larger than 1500 bytes with the
ifconfig(8)
utility configures the adapter to receive and transmit Jumbo Frames.
The maximum MTU size for Jumbo Frames is 16114.
This driver version supports VLANs.
For information on enabling VLANs, see
ifconfig(8).
HARDWARE
The
driver supports the following cards:
Intel PRO/10GbE LR Server Adapter
Intel PRO/10GbE SR Server Adapter
DIAGNOSTICS
"ixgb%d: Unable to allocate bus resource: memory"
A fatal initialization error has occurred.
"ixgb%d: Unable to allocate bus resource: interrupt"
A fatal initialization error has occurred.
"ixgb%d: watchdog timeout -- resetting"
The device has stopped responding to the network, or there is a problem with
the network connection (cable).
SUPPORT
For general information and support,
go to the Intel support website at:
http://support.intel.com
If an issue is identified with the released source code on the supported kernel
with a supported adapter, email the specific information related to the
issue to
Aq freebsdnic@mailbox.intel.com .
