The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

sf (7)
  • sf (4) ( FreeBSD man: Специальные файлы /dev/* )
  • >> sf (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    sf - SOC+ FC-AL FCP Driver
     
    

    SYNOPSIS

    sf@port,0 
    

     

    DESCRIPTION

    The sf driver is a SCSA compliant nexus driver which supports the Fibre Channel Protocol for SCSI on Private Fibre Channel Arbitrated loops. An SBus card called the SOC+ card (see socal(7D)) connects the Fibre Channel loop to the host system.

    The sf driver interfaces with the SOC+ device driver, socal(7D), the SCSI disk target driver, ssd(7D), and the SCSI-3 Enclosure Services driver, ses(7D). It only supports SCSI devices of type disk and ses.

    The sf driver supports the standard functions provided by the SCSA interface. The driver supports auto request sense and tagged queueing by default.

    The driver requires that all devices have unique hard addresses defined by switch settings in hardware. Devices with conflicting hard addresses will not be accessible.  

    FILES

    /platform/architecture/kernel/drv/sf

    ELF kernel module

    /platform/architecture/kernel/drv/sf.conf

    sf driver configuration file

     

    ATTRIBUTES

    See attributes(5) for descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE

    ArchitectureSPARC

     

    SEE ALSO

    luxadm(1M), prtconf(1M), driver.conf(4), socal(7D), ssd(7D)

    Writing Device Drivers

    ANSI X3.272-1996, Fibre Channel Arbitrated Loop (FC-AL)

    ANSI X3.269-1996, Fibre Channel Protocol for SCSI (FCP)

    ANSI X3.270-1996, SCSI-3 Architecture Model (SAM)

    Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)  

    DIAGNOSTICS

    In addition to being logged, the messages below may display on the system console.

    The first set of messages indicate that the attachment was unsuccessful, and will only display while the sf driver is initially attempting to attach. Each message is preceded by sf%d , where %d is the instance number of the sf device.

    Failed to alloc soft state

    Driver was unable to allocate space for the internal state structure. Driver did not attach to device, SCSI devices will be inaccessible.

    Bad soft state

    Driver requested an invalid internal state structure. Driver did not attach to device, SCSI devices will be inaccessible.

    Failed to obtain transport handle

    Driver was unable to obtain a transport handle to communicate with the socal driver. Driver did not attach to device, SCSI devices will be inaccessible

    Failed to allocate command/response pool

    Driver was unable to allocate space for commands and responses. Driver did not attach to device, SCSI devices will be inaccessible.

    Failed to allocate kmem cache

    Driver was unable to allocate space for the packet cache. Driver did not attach to device, SCSI devices will be inaccessible.

    Failed to allocate dma handle for

    Driver was unable to allocate a dma handle for the loop map. Driver did not attach to device, SCSI devices will be inaccessible.

    Failed to allocate lilp map

    Driver was unable to allocate space for the loop map. Driver did not attach to device, SCSI devices will be inaccessible.

    Failed to bind dma handle for

    Driver was unable to bind a dma handle for the loop map. Driver did not attach to device, SCSI devices will be inaccessible.

    Failed to attach

    Driver was unable to attach for some reason that may be printed. Driver did not attach to device, SCSI devices will be inaccessible.

    The next set of messages may display at any time. The full device pathname, followed by the shorter form described above, will precede the message.

    Invalid lilp map

    The driver did not obtain a valid lilp map from the socal driver. SCSI device will be inaccessible.

    Target t, AL-PA x and hard

    The device with a switch setting t has an AL-PA x which does not match its hard address y. The device will not be accessible.

    Duplicate switch settings

    The driver detected devices with the same switch setting. All such devices will be inaccessible.

    WWN changed on target t

    The World Wide Name (WWN) has changed on the device with switch setting t.

    Target t, unknown device type

    The driver does not know the device type reported by the device with switch setting t.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    FILES
    ATTRIBUTES
    SEE ALSO
    DIAGNOSTICS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру