My name is Sergey and I have a little problem with callback turning in Linux. Scripts I used are below this comments. The trouble is in the few lastest lines of connection

talking. The pppd was compilated with -DCBCP_SUPPORT flag and files cbcp.h, cbcp.o and cbcp.c was added to the corresponding variables. This is the listing of the

connection talking:

[root@localhost ppp]# ./dial1
timeout set to 60 seconds
abort on (BUSY)
abort on (NO DIALTONE)
abort on (ERROR)
abort on (NO CARRIER)
send (ATZ^M)
expect (OK)
ATZ^M^M
OK
-- got it

send (AT&FE0V1&C1&D2S95=1S0=0DP5361500^M)
expect (CONNECT)
^M
AT&FE0V1&C1&D2S95=1S0=0DP5361500^M^M
CONNECT
-- got it

send (^M)
Serial connection established.
using channel 20
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <callback CBCP> <magic 0xc99e226d> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x59 <asyncmap 0xa0000> <auth pap> <magic 0x6029ff31> <pcomp> <accomp>]
sent [LCP ConfAck id=0x59 <asyncmap 0xa0000> <auth pap> <magic 0x6029ff31> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <callback CBCP> <magic 0xc99e226d> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0xc99e226d]
cbcp_lowerup
want: 14
sent [PAP AuthReq id=0x1 user="_kp35427" password=<hidden>]
rcvd [LCP EchoRep id=0x0 magic=0x6029ff31]
rcvd [PAP AuthAck id=0x1 ""]
cbcp_open
rcvd [CBCP Request id=0x9e < UserDefined delay = 0 number = >] 00
length: 5
user callback allowed
cbcp_resp cb_type=4
cbcp_resp CONF_USER
sent [CBCP Response id=0x9e < UserDefined delay = 5 number = 4555456>] 34 35 35 35 34 35 36 00
rcvd [CBCP Ack id=0x9f < UserDefined delay = 5 number = 4555456>] 34 35 35 35 34 35 36 00
id doesn't match: expected 158 recv 159
peer will call: 4555456
sent [LCP TermReq id=0x2 "Call me back, please"]
rcvd [LCP TermAck id=0x2]
Connection terminated.
timeout set to 120 seconds
abort on (NO CARRIER)
abort on (BUSY)
abort on (NO DIALTONE)
abort on (ERROR)
send (ATZ^M)
expect (OK)
^M
OK
-- got it

send (AT&FE0V1&C1&D2S95=1S0=0^M)
expect (RING)
^M
AT&FE0V1&C1&D2S95=1S0=0^M^M
OK^M
^M
RING
-- got it

send (ATA^M)
expect (CONNECT)
^M
^M
CONNECT
-- got it

send (^M)
Serial connection established.
using channel 21
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
rcvd [LCP ConfReq id=0x5a <asyncmap 0xa0000> <auth pap> <magic 0x602aae05> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <pcomp> <accomp>]
sent [LCP ConfRej id=0x5a <magic 0x602aae05>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x5b <asyncmap 0xa0000> <auth pap> <pcomp> <accomp>]
sent [LCP ConfAck id=0x5b <asyncmap 0xa0000> <auth pap> <pcomp> <accomp>]
sent [PAP AuthReq id=0x1 user="_kp35427" password=<hidden>]
rcvd [PAP AuthAck id=0x1 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [IPCP ConfReq id=0x1 <addr 195.248.191.53>]
sent [IPCP ConfAck id=0x1 <addr 195.248.191.53>]
rcvd [LCP ProtRej id=0x1 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>]
rcvd [IPCP ConfNak id=0x2 <addr 212.86.229.206>]
sent [IPCP ConfReq id=0x3 <addr 212.86.229.206>]
rcvd [IPCP ConfAck id=0x3 <addr 212.86.229.206>]
local  IP address 212.86.229.206
remote IP address 195.248.191.53
Script /etc/ppp/ip-up started (pid 4463)
Script /etc/ppp/ip-up finished (pid 4463), status = 0x0
----------------and next repeat unlimited times---------------------
rcvd [LCP EchoReq id=0x1 magic=0x0 78 00 18 04]
sent [LCP EchoRep id=0x1 magic=0x0 15 03 2f 01]
rcvd [LCP EchoReq id=0x2 magic=0x0 78 00 18 04]
sent [LCP EchoRep id=0x2 magic=0x0 15 03 2f 01]
----------------------------------end----------------------------------

I don't undrestand what's problem at? Can you help me or explain? Scripts were:

1) /etc/ppp/dial1:

#!/bin/bash
pppd debug callback 4555456 noauth call isp
sleep 10s
pppd debug noauth call isp2

2) /etc/ppp/peers/isp:

/dev/ttyS0 57600 crtscts
noauth

connect '/usr/sbin/chat -v -s -f /etc/ppp/chat/dial.chat'
asyncmap 0
crtscts
bsdcomp 15

ipcp-accept-local
ipcp-accept-remote
defaultroute

lcp-echo-interval 20
lcp-echo-failure 2

name _kp35427

nodetach
receive-all

3) /etc/ppp/isp2:

/dev/ttyS0 57600 crtscts
noauth
connect '/usr/sbin/chat -v -s -f /etc/ppp/chat/cb.chat'
bsdcomp 15
lock
debug

ipcp-accept-local
ipcp-accept-remote

name _kp35427

nodetach
receive-all

4) /etc/ppp/chat/cb.chat:

TIMEOUT 120
ABORT "NO CARRIER"
ABORT "BUSY"
ABORT "NO DIALTONE"
ABORT "ERROR"
"" ATZ
OK AT&FE0V1&C1&D2S95=1S0=0
RING ATA
CONNECT ""

5) /etc/ppp/chat/dial.chat:

TIMEOUT 60
ABORT BUSY
ABORT "NO DIALTONE"
ABORT ERROR
ABORT "NO CARRIER"
"" ATZ
OK AT&FE0V1&C1&D2S95=1S0=0DP5361500
CONNECT ""

6) /etc/ppp/pap-secrets:

"_kp35427" * "password" *

7) etc/ppp/chap-secrets:

"_kp35427" * "password" *

----------------------------------------------------------

You help not only to me but and to my friends. Nowdays callback is single thing that hold me in MS Windows. HELP ME DELETE WINDOWS AND COMPLETELLY COME INTO

LINUX.
Stringer: stringer2002@pisem.net

• Little trouble after callback and during connecting, qq, 21:26 , 05-Июл-03, (1)