The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"Не стартует Х-сервер в Suse Linux"
Вариант для распечатки  
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [Проследить за развитием треда]

"Не стартует Х-сервер в Suse Linux" 
Сообщение от Strangerr Искать по авторуВ закладки(ok) on 12-Дек-05, 20:29  (MSK)
При запуске Х-сервера командой startx выдается следующее:
fatal server error:
no screens found.

XIO: fatal IO Error 104 (connected reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining.

В чем проблема? Где копать? Что смотреть?

Текст файла /etc/x11/xfree86config:
# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier     "Default Layout"
Screen      0  "Screen0" 0 0
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"
InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath      "/usr/X11R6/lib/X11/rgb"
FontPath     "unix/:7100"
EndSection

Section "Module"
Load  "dbe"
Load  "extmod"
Load  "fbdevhw"
Load  "glx"
Load  "record"
Load  "freetype"
Load  "type1"
Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier  "Keyboard0"
Driver      "keyboard"
Option     "XkbRules" "xfree86"
Option     "XkbModel" "pc105"
Option     "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option     "Protocol" "IMPS/2"
Option     "Device" "/dev/psaux"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier  "DevInputMice"
Driver      "mouse"
Option     "Protocol" "IMPS/2"
Option     "Device" "/dev/input/mice"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier   "Monitor0"
VendorName   "Monitor Vendor"
ModelName    "Unprobed Monitor"
HorizSync    31.5 - 37.9
VertRefresh  50.0 - 100.0
Option     "dpms"
EndSection

Section "Device"
Identifier  "Videocard0"
Driver      "vesa"
VendorName  "Videocard vendor"
BoardName   "VESA driver (generic)"
VideoRam    32768
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Videocard0"
Monitor    "Monitor0"
DefaultDepth     24
SubSection "Display"
Depth     24
Modes    "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group        0
Mode         0666
EndSection

  Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

 Оглавление

Сообщения по теме [Сортировка по времени, UBB]

1. "Не стартует Х-сервер в Suse Linux" 
Сообщение от vvvua emailИскать по авторуВ закладки(ok) on 13-Дек-05, 16:37  (MSK)
В логе посмотреть что сбойнуло.
Лог в /var/log/XFree86.0.log
  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "Не стартует Х-сервер в Suse Linux" 
Сообщение от Strangerr Искать по авторуВ закладки(ok) on 15-Дек-05, 23:05  (MSK)
>В логе посмотреть что сбойнуло.
>Лог в /var/log/XFree86.0.log

Содержимое лога:

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.0.1
Release Date: 9 May 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: SuSE Linux [ELF] SuSE
Build Date: 23 September 2003
Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version.

Module Loader present
Markers:
(--) probed, (**) from config file, (
==) default setting,
        
(++) from command line,
(!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/XFree86.0.log", Time: Thu Dec 15 22:18:30 2005

(==) Using config file: "/etc/X11/XF86Config"

(==) ServerLayout "Layout[all]"

(**) |-->Screen "Screen[0]" (0)

(**) |   |-->Monitor "Monitor[0]"

(**) |   |-->Device "Device[0]"

(**) |-->Input Device "Keyboard[0]"

(**) Option "Protocol" "Standard"

(**) Option "XkbRules" "xfree86"

(**) XKB: rules: "xfree86"

(**) Option "XkbModel" "pc102"

(**) XKB: model: "pc102"

(**) Option "XkbLayout" "ru"

(**) XKB: layout: "ru"

(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse[1]"

(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.

Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/misc" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/75dpi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/100dpi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/Type1" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/latin7/75dpi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/baekmuk" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/japanese" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/misc" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/75dpi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/100dpi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/misc" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/75dpi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/100dpi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/Type1" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/misc/sgi" does not exist.

Entry deleted from font path.

(WW) The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist.

Entry deleted from font path.
(**) FontPath set to /usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/kwintv,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/uni:unscaled,/usr/X11R6/lib/X11/fonts/CID"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) Input device list set to "/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/mouse,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0,/dev/pointer0,/dev/pointer1,/dev/pointer2,/dev/pointer3"

(==) ModulePath set to "/usr/X11R6/lib/modules"

(**) Option "AllowMouseOpenFail"

(**) Option "Xinerama" "off"

(**) Option "RandR" "on"

(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:

XFree86 ANSI C Emulation: 0.2

XFree86 Video Driver: 0.6

XFree86 XInput driver : 0.4

XFree86 Server Extension : 0.2

XFree86 Font Renderer : 0.4

(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a

(II) Module bitmap: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.0

Module class: XFree86 Font Renderer

ABI class: XFree86 Font Renderer, version 0.4

(II) Loading font Bitmap
(II) LoadModule: "pcidata"

(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.0

ABI class: XFree86 Video Driver, version 0.6

(II) PCI: Probing config type using method 1

(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000

(II) PCI: PCI scan (all values are in hex)

(II) PCI: 00:00:0: chip 8086,7190 card 15ad,1976 rev 01 class 06,00,00 hdr 00

(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 01 class 06,04,00 hdr 01

(II) PCI: 00:07:0: chip 8086,7110 card 15ad,1976 rev 08 class 06,01,00 hdr 80

(II) PCI: 00:07:1: chip 8086,7111 card 15ad,1976 rev 01 class 01,01,8a hdr 00

(II) PCI: 00:07:2: chip 8086,7112 card 15ad,1976 rev 00 class 0c,03,00 hdr 00

(II) PCI: 00:07:3: chip 8086,7113 card 15ad,1976 rev 08 class 06,80,00 hdr 80

(II) PCI: 00:0f:0: chip 15ad,0405 card 15ad,0405 rev 00 class 03,00,00 hdr 00

(II) PCI: 00:10:0: chip 104b,1040 card 104b,1040 rev 01 class 01,00,00 hdr 00

(II) PCI: 00:11:0: chip 1022,2000 card 1022,2000 rev 10 class 02,00,00 hdr 00

(II) PCI: 00:12:0: chip 1274,1371 card 1274,1371 rev 02 class 04,01,00 hdr 00

(II) PCI: End of PCI scan

(II) Host-to-PCI bridge:

(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)

(II) Bus 0 I/O range:

[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]

(II) Bus 0 prefetchable memory range:

[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]

(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:

(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)

(--) PCI:*(0:15:0) VMWare Inc unknown chipset (0x0405) rev 0, Mem @ 0xfa000000/24, 0xf9000000/24, I/O @ 0x1400/4
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]

[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:

[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)


[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)

[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]

[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]

[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]

[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]

[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]

(II) PCI Memory resource overlap reduced 0xf4000000 from 0xf7ffffff to 0xf3ffffff
(II) Active PCI resource ranges:

[0] -1 0 0xf8000000 - 0xf800001f (0x20) MX[B]

[1] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O

[2] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)

[3] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)

[4] -1 0 0x00001080 - 0x000010bf (0x40) IX[B]

[5] -1 0 0x000010e0 - 0x000010ff (0x20) IX[B]

[6] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]

[7] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]

[8] -1 0 0x00001410 - 0x0000141f (0x10) IX[B]

[9] -1 0 0x00001400 - 0x0000140f (0x10) IX[B](B)

(II) Active PCI resource ranges after removing overlaps:

[0] -1 0 0xf8000000 - 0xf800001f (0x20) MX[B]

[1] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O

[2] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)

[3] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)

[4] -1 0 0x00001080 - 0x000010bf (0x40) IX[B]

[5] -1 0 0x000010e0 - 0x000010ff (0x20) IX[B]

[6] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]

[7] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]

[8] -1 0 0x00001410 - 0x0000141f (0x10) IX[B]

[9] -1 0 0x00001400 - 0x0000140f (0x10) IX[B](B)

(II) OS-reported resource ranges after removing overlaps with PCI:

[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)

[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)

[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]

[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]

[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]

[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]

[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]

(II) All system resource ranges:

[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)

[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)

[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]

[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]

[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]

[5] -1 0 0xf8000000 - 0xf800001f (0x20) MX[B]

[6] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O

[7] -1 0 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)

[8] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)

[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]

[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]

[11] -1 0 0x00001080 - 0x000010bf (0x40) IX[B]

[12] -1 0 0x000010e0 - 0x000010ff (0x20) IX[B]

[13] -1 0 0x000010c0 - 0x000010df (0x20) IX[B]

[14] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]

[15] -1 0 0x00001410 - 0x0000141f (0x10) IX[B]

[16] -1 0 0x00001400 - 0x0000140f (0x10) IX[B](B)

(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a

(II) Module dbe: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.0

Module class: XFree86 Server Extension

ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a

(II) Module type1: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.2

Module class: XFree86 Font Renderer

ABI class: XFree86 Font Renderer, version 0.4

(II) Loading font Type1

(II) Loading font CID
(II) LoadModule: "speedo"

(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a

(II) Module speedo: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.1

Module class: XFree86 Font Renderer

ABI class: XFree86 Font Renderer, version 0.4

(II) Loading font Speedo

(II) LoadModule: "freetype"

(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so

(II) Module freetype: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 2.0.2

Module class: XFree86 Font Renderer

ABI class: XFree86 Font Renderer, version 0.4

(II) Loading font FreeType
(II) LoadModule: "extmod"

(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a

(II) Module extmod: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.0

Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2

(II) Loading extension SHAPE

(II) Loading extension MIT-SUNDRY-NONSTANDARD

(II) Loading extension BIG-REQUESTS

(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER

(II) Loading extension XC-MISC

(II) Loading extension XFree86-VidModeExtension

(II) Loading extension XFree86-Misc

(II) Loading extension XFree86-DGA
(II) Loading extension DPMS

(II) Loading extension FontCache

(II) Loading extension TOG-CUP

(II) Loading extension Extended-Visual-Information

(II) Loading extension XVideo

(II) Loading extension XVideo-MotionCompensation

(II) Loading extension X-Resource

(II) LoadModule: "glx"

(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a

(II) Module glx: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.0

ABI class: XFree86 Server Extension, version 0.2

(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"

(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a

(II) Module GLcore: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.0

ABI class: XFree86 Server Extension, version 0.2

(II) Loading extension GLX
(II) LoadModule: "v4l"

(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o

(II) Module v4l: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 0.0.1

ABI class: XFree86 Video Driver, version 0.6

(II) LoadModule: "nvidia"

(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o

(II) Module nv: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.1

Module class: XFree86 Video Driver

ABI class: XFree86 Video Driver, version 0.6

(II) LoadModule: "mouse"

(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o

(II) Module mouse: vendor="The XFree86 Project"

compiled for 4.3.0.1, module version = 1.0.0

Module class: XFree86 XInput Driver

ABI class: XFree86 XInput driver, version 0.4

(II) v4l driver for Video4Linux
(II) NVIDIA: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,

Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,

Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,

GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,

Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,

GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,

GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,

GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,

GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,

GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,

Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,

GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,

GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,

0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,

Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,

GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,

Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,

GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,

GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,

0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,

Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200 Ultra,

GeForce FX 5200, GeForce FX 5200SE, GeForce FX Go5200,

GeForce FX Go5250, GeForce FX Go5200 32M/64M, 0x0329, 0x032A,

Quadro FX 500, GeForce FX Go5300, GeForce FX Go5100, 0x032F,

GeForce FX 5900 Ultra, GeForce FX 5900, 0x0332,

GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000, 0x0341, 0x0342,
0x0343, 0x0347, 0x0348, 0x0349, 0x034B, 0x034C, 0x034E, 0x034F

(II) Primary Device is: PCI 00:0f:0
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to http://www.suse.de/feedback.


  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

3. "Не стартует Х-сервер в Suse Linux" 
Сообщение от vvvua emailИскать по авторуВ закладки(ok) on 18-Дек-05, 01:03  (MSK)
Если я правильно понял, то ставится оно под vmware.
Вот какраз и дров vmware и не нашел xserver.
  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

4. "Не стартует Х-сервер в Suse Linux" 
Сообщение от Strangerr Искать по авторуВ закладки(ok) on 18-Дек-05, 23:26  (MSK)
>Если я правильно понял, то ставится оно под vmware.
>Вот какраз и дров vmware и не нашел xserver.


Точно! Под vmware! Но как вы догадались?????  Недоумеваю!!!
И что все-таки делать???

  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

5. "Не стартует Х-сервер в Suse Linux" 
Сообщение от vvvua emailИскать по авторуВ закладки(ok) on 29-Дек-05, 15:05  (MSK)

>Точно! Под vmware! Но как вы догадались?????  Недоумеваю!!!
>И что все-таки делать???
Это из лог-файла видно было.
Точно не знаю. Можно frame buffer устройсво настроить для видюхи.
В инете посмотреть как.


  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх


Архив | Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ]




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру