The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]



"Dell Broadcom 5720 Dual Port - 2 интерфейса?"
Вариант для распечатки  
Пред. тема | След. тема 
Форум Открытые системы на сервере (Аппаратура, Железо / Linux)
Изначальное сообщение [ Отслеживать ]

"Dell Broadcom 5720 Dual Port - 2 интерфейса?"  +/
Сообщение от Azudimemail (??), 19-Фев-19, 14:32 
Есть сетевая карта Dell 540-BBGW с 2 портами (Broadcom 5720 Dual Port).
Можно ли для каждого порта сетевой карты настроить отдельный интерфейс?

CentOS 7.

lspci показывает следующую инфу о карте:

Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe
        Subsystem: Broadcom Inc. and subsidiaries Device 2003
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at a0020000 (64-bit, prefetchable) [size=64K]
        Region 2: Memory at a0010000 (64-bit, prefetchable) [size=64K]
        Region 4: Memory at a0000000 (64-bit, prefetchable) [size=64K]
        Expansion ROM at 81100000 [disabled] [size=256K]
        Capabilities: [48] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] Vital Product Data
                Product Name: Broadcom NetXtreme Gigabit Ethernet
                Read-only fields:
                        [PN] Part number: BCM95720
                        [MN] Manufacture ID: 31 30 32 38
                        [V0] Vendor specific: FFV7.10.0
                        [V1] Vendor specific: DSV1028VPDR.VER1.0
                        [V2] Vendor specific: NPY2
                        [V3] Vendor specific: PMT1
                        [V4] Vendor specific: NMVBroadcom Corp
                        [V5] Vendor specific: DTINIC
                        [V6] Vendor specific: DCM1001008d452101008d45
                        [RV] Reserved: checksum good, 234 byte(s) reserved
                End
        Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [a0] MSI-X: Enable+ Count=17 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00001000
        Capabilities: [ac] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 10.000W
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop- FLReset-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [13c v1] Device Serial Number 00-00-b0-26-28-13-0d-4e
        Capabilities: [150 v1] Power Budgeting <?>
        Capabilities: [160 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: tg3
        Kernel modules: tg3

#ifconfig
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.10.130  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::693:704c:47b3:d1a0  prefixlen 64  scopeid 0x20<link>
        ether b0:26:28:13:0d:4e  txqueuelen 1000  (Ethernet)
        RX packets 58431  bytes 6732557 (6.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 762  bytes 95221 (92.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 20

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 16  bytes 1392 (1.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 16  bytes 1392 (1.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Ответить | Правка | Cообщить модератору

Оглавление

Сообщения по теме [Сортировка по времени | RSS]


1. "Dell Broadcom 5720 Dual Port - 2 интерфейса?"  +/
Сообщение от одмин (?), 19-Фев-19, 15:48 
наверное вас интересует
ifconfig -a
Ответить | Правка | ^ к родителю #0 | Наверх | Cообщить модератору

2. "Dell Broadcom 5720 Dual Port - 2 интерфейса?"  +/
Сообщение от Andrey Mitrofanov (?), 19-Фев-19, 16:09 
> наверное вас интересует
> ifconfig -a

Это немодно.  Теперь положено -

ip l
Ответить | Правка | ^ к родителю #1 | Наверх | Cообщить модератору

Архив | Удалить

Рекомендовать для помещения в FAQ | Индекс форумов | Темы | Пред. тема | След. тема




Спонсоры:
Слёрм
Inferno Solutions
Hosting by Ihor
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2019 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру