Поставил FreeBSD 7.0 на сервер с скази Рейд Контроллером (зеркало)
сервак Фуджитсу Сименс RX600 S2 PRIMERGY
Теперь наблюдаю сташные тормоза lynx  собирался два часа, вчера так и не дожлся когда соберется.
Похоже что тормоза из за диска потому что происходит копирование мегабайт в 3и-5ть минут.
Подскажите, поажлуйста, как вообще выяснить из за чего такая фигня может быть и как решить?

dmesg

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) MP CPU 3.16GHz (3161.94-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf49  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x659d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Logical CPUs per core: 2
real memory  = 3216482304 (3067 MB)
avail memory = 3140399104 (2994 MB)
ACPI APIC Table: <_FSC_  TIANO  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
cpu2 (AP): APIC ID:  6
cpu3 (AP): APIC ID:  7
cpu4 (AP): APIC ID:  8
cpu5 (AP): APIC ID:  9
cpu6 (AP): APIC ID: 14
cpu7 (AP): APIC ID: 15
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <_FSC_ TIANO  > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0xca6,0xca7 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 132d0000132d
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 132d0000132d
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 132d0000132d
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 132d0000132d
device_attach: est4 attach returned 6
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 132d0000132d
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 132d0000132d
device_attach: est6 attach returned 6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 132d0000132d
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xa0000-0xbffff,0xc0000000-0xcfffffff,0xffc00000-0xffdfffff,0xffe00000-0xffffffff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci8: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> mem 0xde100000-0xde100fff irq 47 at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci10
pci12: <ACPI PCI bus> on pcib8
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x2100> mem 0xde000000-0xde00ffff irq 48 at device 2.0 on pci12
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:0e:0c:42:f5:2a
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x2100> mem 0xde010000-0xde01ffff irq 49 at device 2.1 on pci12
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:0e:0c:42:f5:2b
bge1: [ITHREAD]
pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci14: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci14
pci15: <ACPI PCI bus> on pcib10
amr0: <LSILogic MegaRAID 1.53> mem 0xe3000000-0xe300ffff,0xe3300000-0xe333ffff irq 86 at device 14.0 on pci15
amr0: [ITHREAD]
amr0: <LSILogic MegaRAID SCSI 320-2E> Firmware 516G, BIOS H430, 256MB RAM
pcib11: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pci16: <ACPI PCI bus> on pcib11
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x3000-0x30ff mem 0xe3200000-0xe3200fff irq 100 at device 6.0 on pci16
ahc0: [ITHREAD]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <memory, RAM> at device 9.0 (no driver attached)
pci0: <memory, RAM> at device 9.1 (no driver attached)
pci0: <memory, RAM> at device 9.2 (no driver attached)
pci0: <memory, RAM> at device 9.3 (no driver attached)
pci0: <memory, RAM> at device 9.4 (no driver attached)
pci0: <memory, RAM> at device 9.5 (no driver attached)
pci0: <memory, RAM> at device 9.6 (no driver attached)
pci0: <memory, RAM> at device 9.7 (no driver attached)
pci0: <memory, RAM> at device 11.0 (no driver attached)
pci0: <memory, RAM> at device 11.1 (no driver attached)
pci0: <memory, RAM> at device 11.2 (no driver attached)
pci0: <memory, RAM> at device 11.3 (no driver attached)
pci0: <memory, RAM> at device 11.4 (no driver attached)
pci0: <memory, RAM> at device 11.5 (no driver attached)
pci0: <memory, RAM> at device 11.6 (no driver attached)
pci0: <memory, RAM> at device 11.7 (no driver attached)
pci0: <memory, RAM> at device 13.0 (no driver attached)
pci0: <memory, RAM> at device 13.1 (no driver attached)
pci0: <memory, RAM> at device 13.2 (no driver attached)
pci0: <memory, RAM> at device 13.3 (no driver attached)
pci0: <memory, RAM> at device 13.4 (no driver attached)
pci0: <memory, RAM> at device 13.5 (no driver attached)
pci0: <memory, RAM> at device 13.6 (no driver attached)
pci0: <memory, RAM> at device 13.7 (no driver attached)
pci0: <memory, RAM> at device 15.0 (no driver attached)
pci0: <memory, RAM> at device 15.1 (no driver attached)
pci0: <memory, RAM> at device 15.2 (no driver attached)
pci0: <memory, RAM> at device 15.3 (no driver attached)
pci0: <memory, RAM> at device 15.4 (no driver attached)
pci0: <memory, RAM> at device 15.5 (no driver attached)
pci0: <memory, RAM> at device 15.6 (no driver attached)
pci0: <memory, RAM> at device 15.7 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x9060-0x907f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x9040-0x905f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x9020-0x903f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xe3500000-0xe35003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
uhub4: <vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.00, addr 2> on uhub3
uhub4: multiple transaction translators
uhub4: 3 ports with 3 removable, self powered
umass0: <Prolific Technology Inc. ATAPI-6 Bridge Controller, class 0/0, rev 2.00/0.00, addr 3> on uhub4
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci17: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xd7ffffff,0xe3100000-0xe310ffff irq 16 at device 0.0 on pci17
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x9080-0x908f irq 18 at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FILTER]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <vendor 0x0430 product 0x0100, class 0/0, rev 2.00/1.07, addr 2> on uhub2
ums0: 3 buttons.
ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.10/2.00, addr 3> on uhub2
kbd2 at ukbd0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.00> at ata0-master UDMA33
Waiting 5 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 277600MB (568524800 sectors) RAID 0 (optimal)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
lapic8: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
lapic9: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL EX10.2A A0A.> Fixed Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 9787MB (20044080 512 byte sectors: 255H 63S/T 1247C)
Trying to mount root from ufs:/dev/amrd0s1a
arp: 00:16:9d:c0:21:41 is using my IP address 192.168.0.6!
arp: 00:16:9d:c0:21:41 is using my IP address 192.168.0.6!
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source
interrupt storm detected on "irq16:"; throttling interrupt source