https://slinkov.ru/openforum/vsluhforumID6/15315.html Никак не могу настроить PPPoE на ubr7111 IOS 12.3(23)BC<br><br>Вот кусок конфига:<br><br>vpdn enable<br><br>vpdn-group pppoe2<br> accept-dialin<br> protocol pppoe<br> virtual-template 1<br> pppoe limit per-mac 2000<br>!<br>interface Virtual-Template1<br> description PPPoE<br> mtu 1492<br> bandwidth 1000<br> ip unnumbered Loopback1<br> ip access-group ingress in<br> ip accounting output-packets<br> timeout absolute 180 0<br> peer default ip address pool dial<br> no keepalive<br> ppp quality 10<br> ppp authentication pap callin<br> ppp authorization vpn-group<br>!<br><br>а вот кусок дебага(debug ppp negotiation):<br>Jan 22 11:12:55 cisco 4124: 5d12h: ppp543 PPP: Send Message[Dynamic Bind Response]<br>Jan 22 11:12:55 cisco 4125: 5d12h: ppp543 PPP: Using default call direction<br>Jan 22 11:12:55 cisco 4126: 5d12h: ppp543 PPP: Treating connection as a dedicated line<br>Jan 22 11:12:55 cisco 4127: 5d12h: ppp543 PPP: Session handle[7C0005D1] Session id[543]<br>Jan 22 11:12:55 cisco 4128: 5d12h: ppp543 PPP: Phase is ESTABLISHING, Active Open<br>Jan 22 11:12:55 cisco 4129: 5d12h: https://slinkov.ru/openforum/vsluhforumID6/15315.html#1 Tue, 22 Jan 2008 12:34:54 GMT все, пофиксил. Это на стороне клиента глюк<br>