OpenForum RSS: cisco3620 - Controller E1 1/0, changed state to down/up

cisco3620 - Controller E1 1/0, changed state to down/up (Andrei_V)

Tue, 10 Mar 2009 03:36:23 GMT

>�� , ��, �� ... � �� , ��
>�� ?

�� (��), �� .
�� - ��4, �� - �� "�� "

cisco3620 - Controller E1 1/0, changed state to down/up (trianon)

Sat, 07 Mar 2009 22:12:21 GMT

>[�� ]
> Data in current interval (331 seconds elapsed):
> 0 Line Code Violations, 0 Path Code
>Violations
> 0 Slip Secs, 0 Fr Loss Secs,
>0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs,
>0 Severely Err Secs, 0 Unavail Secs
>
>�� :
>Clock Source is Internal

�� , ��, �� ... � �� , �� ?

cisco3620 - Controller E1 1/0, changed state to down/up (starlets)

Sat, 07 Mar 2009 14:11:49 GMT

>[�� ]
>>horoshaja statja
>
>c3620#show controller e1 ?
> <1-1> Controller slot number
> call-counters DS0 call counters
> |
> Output modifiers
> <cr>
>
>�� . :(

Konechno nado propisat nomer slota/porta :)))
>�� . ��!

a naschet problemy tvoej - u tebja Path code vilations
"Ensure the framing format configured on the port matches the framing format of the line. Look for Framing is {crc4|no-crc4} in the show controller e1 output.

If Path Code Violations keep increasing, contact your Service Provider to check the E1 line as Path Code Violations can also be caused by physical line problems."

cisco3620 - Controller E1 1/0, changed state to down/up (Andrei_V)

Sat, 07 Mar 2009 13:56:15 GMT

>�� brief
>sh contr e1 1/0
>
>�� ?
>conf t
>contr e1 1/0
>?

c3620#sh contr e1 1/0
E1 1/0 is up.
Applique type is Channelized E1 - balanced
Description: To Rostelecom
No alarms detected.
alarm-trigger is not set
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Internal.
Data in current interval (331 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 1:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 2:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Sev

cisco3620 - Controller E1 1/0, changed state to down/up (trianon)

Sat, 07 Mar 2009 07:42:30 GMT

>[�� ]
>c3620#sh contr e1 1/0 brief
>
> ^
>
>% Invalid input detected at '^' marker.
>
>c3620#sh network-clocks
>
>^
>% Invalid input detected at '^' marker.

�� brief
sh contr e1 1/0

�� ?
conf t
contr e1 1/0
?

cisco3620 - Controller E1 1/0, changed state to down/up (Andrei_V)

Sat, 07 Mar 2009 07:17:50 GMT

>show controller e1 - mandatory
>http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800f99bb.shtml
>horoshaja statja

c3620#show controller e1 ?
<1-1> Controller slot number
call-counters DS0 call counters
| Output modifiers
<cr>

�� . :(
�� . ��!

cisco3620 - Controller E1 1/0, changed state to down/up (starlets)

Sat, 07 Mar 2009 06:50:23 GMT

>[�� ]
>c3620#sh contr e1 1/0 brief
>
> ^
>
>% Invalid input detected at '^' marker.
>
>c3620#sh network-clocks
>
>^
>% Invalid input detected at '^' marker.

show controller e1 - mandatory
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800f99bb.shtml
horoshaja statja

cisco3620 - Controller E1 1/0, changed state to down/up (merko)

Mon, 02 Mar 2009 07:45:07 GMT

�� Cisco-851.
�� :
- FastEthernet4 �� ;
- Vlan1 (FastEthernet0 - FastEthernet3) - �� , � � Vlan1 �� (��). �� FastEthernet0. �� , �� FastEthernet0 (changed state to down/up). �� , �� ... �� (�� ), �� . �� speed 10, �� .
�� ...

cisco3620 - Controller E1 1/0, changed state to down/up (fantom)

Mon, 02 Mar 2009 06:35:10 GMT

�� .
controller e1 1/0
clock source
�� ?
� �� "��" e1 ��
clock source internal
� ��
clock source line

�� - �� .