при запуске инициализационного скрипта для ipsec в ответ вижу следующее. Использую Openswan 2.4.6 для ядра версии К2.6.18. Я так понял,причина в самом скрипте. В соответствующих строках его обнаружил функцию eval(),но так как в програмированнии не силён, то прошу помощи  тут. Заранее благодарен!  

ivan/ # /etc/init.d/ipsec start
/etc/init.d/ipsec: eval: line 1: unexpected EOF while looking for matching
`"'
/etc/init.d/ipsec: eval: line 2: syntax error: unexpected end of file
ipsec_setup: Starting FreeS/WAN IPsec 2.03...
ipsec_setup: /usr/local/lib/ipsec/_realsetup: eval: line 90: unexpected EOF
while looking for matching `"'
ipsec_setup: /usr/local/lib/ipsec/_realsetup: eval: line 91: syntax error:
unexpected end of file

• Проблема старта ipsec,anonymous, 11:58 , 24-Май-08
  • Проблема старта ipsec,stranger_1234, 19:32 , 28-Май-08

>при запуске инициализационного скрипта для ipsec в ответ вижу следующее. Использую Openswan
>2.4.6 для ядра версии К2.6.18. Я так понял,причина в самом скрипте.

И Вы, конечно, уверены, что у всех этот скрипт есть?  Покажите его целиком.

>>при запуске инициализационного скрипта для ipsec в ответ вижу следующее. Использую Openswan
>>2.4.6 для ядра версии К2.6.18. Я так понял,причина в самом скрипте.
>
>И Вы, конечно, уверены, что у всех тот скрипт есть?  Покажите
>его целиком.

Ну вот и сам скрипт инициализационный (строка 90 - это функция eval c параметром, заключённым в обратные кавычки, следующая строка пустая. На них он и ругается):

#!/bin/bash
# IPsec startup and shutdown script
# Copyright (C) 1998, 1999, 2001  Henry Spencer.
# Copyright (C) 2002              Michael Richardson <mcr@freeswan.org>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# RCSID $Id: setup.in,v 1.122.6.1 2005/07/25 19:17:03 ken Exp $
#
# ipsec         init.d script for starting and stopping
#               the IPsec security subsystem (KLIPS and Pluto).
#
# This script becomes /etc/rc.d/init.d/ipsec (or possibly /etc/init.d/ipsec)
# and is also accessible as "ipsec setup" (the preferred route for human
# invocation).
#
# The startup and shutdown times are a difficult compromise (in particular,
# it is almost impossible to reconcile them with the insanely early/late
# times of NFS filesystem startup/shutdown).  Startup is after startup of
# syslog and pcmcia support; shutdown is just before shutdown of syslog.
#
# chkconfig: 2345 47 76
# description: IPsec provides encrypted and authenticated communications; \
# KLIPS is the kernel half of it, Pluto is the user-level management daemon.

me='ipsec setup'        # for messages

# where the private directory and the config files are
IPSEC_EXECDIR="${IPSEC_EXECDIR-/usr/lib/ipsec}"
IPSEC_LIBDIR="${IPSEC_LIBDIR-/usr/lib/ipsec}"
IPSEC_SBINDIR="${IPSEC_SBINDIR-/usr/sbin}"
IPSEC_CONFS="${IPSEC_CONFS-/etc}"

if test " $IPSEC_DIR" = " "    # if we were not called by the ipsec command
then
    # we must establish a suitable PATH ourselves
    PATH="${IPSEC_SBINDIR}":/sbin:/usr/sbin:/usr/bin:/bin:/usr/bin
    export PATH

    IPSEC_DIR="$IPSEC_LIBDIR"
    export IPSEC_DIR IPSEC_CONFS IPSEC_LIBDIR IPSEC_EXECDIR
fi

# Check that the ipsec command is available.
found=
for dir in `echo $PATH | tr ':' ' '`
do
    if test -f $dir/ipsec -a -x $dir/ipsec
    then
        found=yes
        break            # NOTE BREAK OUT
    fi
done
if ! test "$found"
then
    echo "cannot find ipsec command -- \`$1' aborted" |
        logger -s -p daemon.error -t ipsec_setup
    exit 1
fi

# accept a few flags

export IPSEC_setupflags
IPSEC_setupflags=""

config=""

for dummy
do
    case "$1" in
    --showonly|--show)  IPSEC_setupflags="$1" ;;
    --config)  config="--config $2" ; shift    ;;
    *) break ;;
    esac
    shift
done

# Pick up IPsec configuration (until we have done this, successfully, we
# do not know where errors should go, hence the explicit "daemon.error"s.)
# Note the "--export", which exports the variables created.
eval  `ipsec _confread $config --optional --varprefix IPSEC --export --type config setup`

if test " $IPSEC_confreadstatus" != " "
then
    case $1 in
    stop|--stop|_autostop)
    echo "$IPSEC_confreadstatus -- \`$1' may not work" |
        logger -s -p daemon.error -t ipsec_setup;;
        
    *) echo "$IPSEC_confreadstatus -- \`$1' aborted" |
        logger -s -p daemon.error -t ipsec_setup;
    exit 1;;
    esac
fi

IPSEC_confreadsection=${IPSEC_confreadsection:-setup}
export IPSEC_confreadsection

IPSECsyslog=${IPSECsyslog-daemon.error}
export IPSECsyslog

# misc setup
umask 022

mkdir -p /var/run/pluto

# do it
case "$1" in
  start|--start|stop|--stop|_autostop|_autostart)
    if test " `id -u`" != " 0"
    then
        echo "permission denied (must be superuser)" |
            logger -s -p $IPSECsyslog -t ipsec_setup 2>&1
        exit 1
    fi
    tmp=/var/run/pluto/ipsec_setup.st
    outtmp=/var/run/pluto/ipsec_setup.out
    (
        ipsec _realsetup $1
        echo "$?" >$tmp
    ) > ${outtmp} 2>&1
    st=$?
    if test -f $tmp
    then
        st=`cat $tmp`
        rm -f $tmp
    fi
    if [ -f ${outtmp} ]; then
        cat ${outtmp} | logger -s -p $IPSECsyslog -t ipsec_setup 2>&1
        rm -f ${outtmp}
    fi
    exit $st
    ;;

  restart|--restart|force-reload)
    $0 $IPSEC_setupflags stop
    $0 $IPSEC_setupflags start
    ;;

  _autorestart)            # for internal use only
    $0 $IPSEC_setupflags _autostop
    $0 $IPSEC_setupflags _autostart
    ;;

  status|--status)
    ipsec _realsetup $1
    exit
    ;;

  --version)
    echo "$me $IPSEC_VERSION"
    exit 0
    ;;

  --help)
    echo "Usage: $me {--start|--stop|--restart|--status}"
    exit 0
    ;;

  *)
    echo "Usage: $me {--start|--stop|--restart|--status}" >&2
    exit 2
esac

exit 0