Привет! Скажтите как с попощью MRTG правельно считывать трафик. Сfgmaker создал конфиг-файл и можно вести учет, но только по портам. В библеотеке MRTG есть cisco_ipaccounting, но он выдает ошибку

C:\MRTG\contrib\cisco_ipaccounting>perl cisco_ip_acc_collect.pl
Accounting table overflow - 351786232 bytes lost.
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.1.9.2.4.11.0)
SNMPv1_Session (remote host: "адрес_рутора" [адрес_рутора].44)
                  community: "public"
                 request ID: 1019361136
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
at c:/mrtg/lib/mrtg2/SNMP_util.pm line 684

Подскажите что можно сделать. Спасибо!

• MRTG,Andrius, 10:59 , 07-Апр-03
  • MRTG,Aleksey_K, 14:22 , 07-Апр-03
    • MRTG,Andrius, 11:17 , 08-Апр-03
      • MRTG,Aleksey_K, 16:20 , 08-Апр-03

do you have smth like this:

interface Ethernet0
ip accounting output-packets

interface Loopback0
ip accounting output-packets

snmp-server community public RO

Yes on router in all interfaces I set
  ip accounting output-packets
and
  snmp-server community public RO
I run cisco_ip_acc_collect.pl script like this
C:\www\cisco_ipaccounting>perl cisco_ip_acc_collect.pl
in the readme file I read that This Script gets IP-accounting data from a Cisco Router and generates output in log_Xnetwork that can be fed into MRTG

after running script I have error like this
C:\www\cisco_ipaccounting>perl cisco_ip_acc_collect.pl
Accounting table overflow - 230117548 bytes lost.
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.1.9.2.4.11.0)
SNMPv1_Session (remote host: "router_IP" [router_IP].45) {45 is last num of my IP}
                  community: "public"
                 request ID: 1763748350
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
at c:/MRTG/lib/mrtg2/SNMP_util.pm line 684

and in the log_Xnetwork I see
0
0

Xnetwork

ja panimaju i po ruski

It seems snmp problem. Not mrtg. Try sniffing and look what you get.

Я нашел отличную вещь и MRTG не нужен
http://cipaf.sourceforge.net/about.shtml