Дело в том, что Х не падают, сами по себе, и ошибок не выводят,
при попытке переключится в текстовую консоль виснет, а при выходе
переключается в текстовый режим и иногда не доходя до приглашения шела
переобувается, если скомпилировать ядро без device agp, то виснет при
старте Хов. Если убрать Load dri из xorg.conf то работает нормально.Xorg.0.log
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/sam.vvt:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: FreeBSD 6.0 i386 [ELF]
Current Operating System: FreeBSD sam.vvt 6.0-CURRENT FreeBSD 6.0-CURRENT #0: Sun May 29 09:03:14 UTC 2005
root@sam.vvt:/usr/src/sys/i386/compile/SAM i386
Build Date: 18 May 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 30 07:16:31 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Radeon"
(**) | |-->Device "Radeon"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/CID/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/CID/").
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/Speedo/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 1695,100f rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1695,100f rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1695,100f rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1695,100f rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1695,100f rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0080 card 1695,100f rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0084 card 1695,100f rev a1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0087 card 1695,100f rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0087 card 1695,100f rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0088 card 1695,100f rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,008c card 1695,100f rev a3 class 06,80,00 hdr 00
(II) PCI: 00:06:0: chip 10de,008a card 1695,100e rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,008b card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0085 card 1695,100f rev a3 class 01,01,8a hdr 00
(II) PCI: 00:0b:0: chip 10de,008e card 1695,100f rev a3 class 01,01,85 hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:07:0: chip 1186,1300 card 1186,1300 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:0b:0: chip 1102,0002 card 1102,8065 rev 0a class 04,01,00 hdr 80
(II) PCI: 01:0b:1: chip 1102,7002 card 1102,0020 rev 0a class 09,80,00 hdr 80
(II) PCI: 01:0d:0: chip 1106,3044 card 1695,900e rev 80 class 0c,00,10 hdr 00
(II) PCI: 02:00:0: chip 1002,4966 card 17af,2005 rev 01 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,496e card 17af,2004 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7ffffff (0x10000000) MX
(--) PCI:*(2:0:0) ATI Technologies Inc Radeon RV250 If [Radeon 9000] rev 1, Mem @ 0xd8000000/27, 0xe8030000/16,
I/O @ 0xd000/8
(--) PCI: (2:0:1) ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) rev 1, Mem @ 0xe0000000/27,
0xe8020000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe9001000 - 0xe9001fff (0x1000) MXE
[1] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MXE
[2] -1 0 0xea001000 - 0xea001fff (0x1000) MXE
[3] -1 0 0xea000000 - 0xebffffff (0x2000000) MXE
[4] -1 0 0xea005000 - 0xea005fff (0x1000) MXE
[5] -1 0 0xea004000 - 0xea007fff (0x4000) MXE
[6] -1 0 0xea003000 - 0xea003fff (0x1000) MXE
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MXEO
[8] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX(B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
[10] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX(B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B)
[12] -1 0 0x0000c300 - 0x0000c3ff (0x100) IXE
[13] -1 0 0x0000c200 - 0x0000c2ff (0x100) IXE
[14] -1 0 0x0000c100 - 0x0000c1ff (0x100) IXE
[15] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXE
[16] -1 0 0x0000ea00 - 0x0000eaff (0x100) IXE
[17] -1 0 0x0000e900 - 0x0000e9ff (0x100) IXE
[18] -1 0 0x00000b70 - 0x00000b7f (0x10) IXE
[19] -1 0 0x00000970 - 0x0000097f (0x10) IXE
[20] -1 0 0x00000bf0 - 0x00000bff (0x10) IXE
[21] -1 0 0x000009f0 - 0x000009ff (0x10) IXE
[22] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[23] -1 0 0x0000e100 - 0x0000e1ff (0x100) IXE
[24] -1 0 0x0000e000 - 0x0000e0ff (0x100) IXE
[25] -1 0 0x0000eb00 - 0x0000ebff (0x100) IXE
[26] -1 0 0x0000e400 - 0x0000e4ff (0x100) IXE
[27] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX(B)
(II) PCI Memory resource overlap reduced 0xe9000000 from 0xe9ffffff to 0xe9000fff
(II) PCI Memory resource overlap reduced 0xea000000 from 0xebffffff to 0xea000fff
(II) PCI Memory resource overlap reduced 0xea004000 from 0xea007fff to 0xea004fff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe9001000 - 0xe9001fff (0x1000) MXE
[1] -1 0 0xe9000000 - 0xe9000fff (0x1000) MXE
[2] -1 0 0xea001000 - 0xea001fff (0x1000) MXE
[3] -1 0 0xea000000 - 0xea000fff (0x1000) MXE
[4] -1 0 0xea005000 - 0xea005fff (0x1000) MXE
[5] -1 0 0xea004000 - 0xea004fff (0x1000) MXE
[6] -1 0 0xea003000 - 0xea003fff (0x1000) MXE
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MXEO
[8] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX(B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
[10] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX(B)
[11] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B)
[12] -1 0 0x0000c300 - 0x0000c3ff (0x100) IXE
[13] -1 0 0x0000c200 - 0x0000c2ff (0x100) IXE
[14] -1 0 0x0000c100 - 0x0000c1ff (0x100) IXE
[15] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXE
[16] -1 0 0x0000ea00 - 0x0000eaff (0x100) IXE
[17] -1 0 0x0000e900 - 0x0000e9ff (0x100) IXE
[18] -1 0 0x00000b70 - 0x00000b7f (0x10) IXE
[19] -1 0 0x00000970 - 0x0000097f (0x10) IXE
[20] -1 0 0x00000bf0 - 0x00000bff (0x10) IXE
[21] -1 0 0x000009f0 - 0x000009ff (0x10) IXE
[22] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[23] -1 0 0x0000e100 - 0x0000e1ff (0x100) IXE
[24] -1 0 0x0000e000 - 0x0000e0ff (0x100) IXE
[25] -1 0 0x0000eb00 - 0x0000ebff (0x100) IXE
[26] -1 0 0x0000e400 - 0x0000e4ff (0x100) IXE
[27] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xe9001000 - 0xe9001fff (0x1000) MXE
[6] -1 0 0xe9000000 - 0xe9000fff (0x1000) MXE
[7] -1 0 0xea001000 - 0xea001fff (0x1000) MXE
[8] -1 0 0xea000000 - 0xea000fff (0x1000) MXE
[9] -1 0 0xea005000 - 0xea005fff (0x1000) MXE
[10] -1 0 0xea004000 - 0xea004fff (0x1000) MXE
[11] -1 0 0xea003000 - 0xea003fff (0x1000) MXE
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MXEO
[13] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX(B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
[15] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX(B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX
[19] -1 0 0x0000c300 - 0x0000c3ff (0x100) IXE
[20] -1 0 0x0000c200 - 0x0000c2ff (0x100) IXE
[21] -1 0 0x0000c100 - 0x0000c1ff (0x100) IXE
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXE
[23] -1 0 0x0000ea00 - 0x0000eaff (0x100) IXE
[24] -1 0 0x0000e900 - 0x0000e9ff (0x100) IXE
[25] -1 0 0x00000b70 - 0x00000b7f (0x10) IXE
[26] -1 0 0x00000970 - 0x0000097f (0x10) IXE
[27] -1 0 0x00000bf0 - 0x00000bff (0x10) IXE
[28] -1 0 0x000009f0 - 0x000009ff (0x10) IXE
[29] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[30] -1 0 0x0000e100 - 0x0000e1ff (0x100) IXE
[31] -1 0 0x0000e000 - 0x0000e0ff (0x100) IXE
[32] -1 0 0x0000eb00 - 0x0000ebff (0x100) IXE
[33] -1 0 0x0000e400 - 0x0000e4ff (0x100) IXE
[34] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX(B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE)
(II) Primary Device is: PCI 02:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset ATI Radeon 9000/PRO If (AGP/PCI) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xe9001000 - 0xe9001fff (0x1000) MXE
[6] -1 0 0xe9000000 - 0xe9000fff (0x1000) MXE
[7] -1 0 0xea001000 - 0xea001fff (0x1000) MXE
[8] -1 0 0xea000000 - 0xea000fff (0x1000) MXE
[9] -1 0 0xea005000 - 0xea005fff (0x1000) MXE
[10] -1 0 0xea004000 - 0xea004fff (0x1000) MXE
[11] -1 0 0xea003000 - 0xea003fff (0x1000) MXE
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MXEO
[13] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX(B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
[15] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX(B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX
[19] -1 0 0x0000c300 - 0x0000c3ff (0x100) IXE
[20] -1 0 0x0000c200 - 0x0000c2ff (0x100) IXE
[21] -1 0 0x0000c100 - 0x0000c1ff (0x100) IXE
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXE
[23] -1 0 0x0000ea00 - 0x0000eaff (0x100) IXE
[24] -1 0 0x0000e900 - 0x0000e9ff (0x100) IXE
[25] -1 0 0x00000b70 - 0x00000b7f (0x10) IXE
[26] -1 0 0x00000970 - 0x0000097f (0x10) IXE
[27] -1 0 0x00000bf0 - 0x00000bff (0x10) IXE
[28] -1 0 0x000009f0 - 0x000009ff (0x10) IXE
[29] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[30] -1 0 0x0000e100 - 0x0000e1ff (0x100) IXE
[31] -1 0 0x0000e000 - 0x0000e0ff (0x100) IXE
[32] -1 0 0x0000eb00 - 0x0000ebff (0x100) IXE
[33] -1 0 0x0000e400 - 0x0000e4ff (0x100) IXE
[34] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX(B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xe9001000 - 0xe9001fff (0x1000) MXE
[6] -1 0 0xe9000000 - 0xe9000fff (0x1000) MXE
[7] -1 0 0xea001000 - 0xea001fff (0x1000) MXE
[8] -1 0 0xea000000 - 0xea000fff (0x1000) MXE
[9] -1 0 0xea005000 - 0xea005fff (0x1000) MXE
[10] -1 0 0xea004000 - 0xea004fff (0x1000) MXE
[11] -1 0 0xea003000 - 0xea003fff (0x1000) MXE
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MXEO
[13] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX(B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
[15] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX(B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX
[22] -1 0 0x0000c300 - 0x0000c3ff (0x100) IXE
[23] -1 0 0x0000c200 - 0x0000c2ff (0x100) IXE
[24] -1 0 0x0000c100 - 0x0000c1ff (0x100) IXE
[25] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXE
[26] -1 0 0x0000ea00 - 0x0000eaff (0x100) IXE
[27] -1 0 0x0000e900 - 0x0000e9ff (0x100) IXE
[28] -1 0 0x00000b70 - 0x00000b7f (0x10) IXE
[29] -1 0 0x00000970 - 0x0000097f (0x10) IXE
[30] -1 0 0x00000bf0 - 0x00000bff (0x10) IXE
[31] -1 0 0x000009f0 - 0x000009ff (0x10) IXE
[32] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[33] -1 0 0x0000e100 - 0x0000e1ff (0x100) IXE
[34] -1 0 0x0000e000 - 0x0000e0ff (0x100) IXE
[35] -1 0 0x0000eb00 - 0x0000ebff (0x100) IXE
[36] -1 0 0x0000e400 - 0x0000e4ff (0x100) IXE
[37] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX(B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xe8030000
(==) RADEON(0): Write-combining range (0xe8030000,0x80000) was already clear
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 2 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xc0000,0x40000) was already clear
(EE) RADEON(0): V_BIOS address 0x0 out of range
(--) RADEON(0): Chipset: "ATI Radeon 9000/PRO If (AGP/PCI)" (ChipID = 0x4966)
(--) RADEON(0): Linear framebuffer at 0xd8000000
(--) RADEON(0): VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): AGP card detected
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): I2C bus "DDC" initialized.
(II) Truncating PCI BIOS Length to 53248
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 1
(II) RADEON(0): EDID data from the display on port 2-----------------------
(II) RADEON(0): Manufacturer: DEL Model: 7077 Serial#: 960709197
(II) RADEON(0): Year: 1998 Week: 48
(II) RADEON(0): EDID Version: 1.1
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34 vert.: 25
(II) RADEON(0): Gamma: 2.81
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): redX: 0.638 redY: 0.325 greenX: 0.276 greenY: 0.596
(II) RADEON(0): blueX: 0.143 blueY: 0.066 whiteX: 0.281 whiteY: 0.311
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) RADEON(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): #6: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 202.0 MHz Image Size: 340 x 255 mm
(II) RADEON(0): h_active: 1600 h_sync: 1904 h_sync_end 2096 h_blank_end 2160 h_border: 0
(II) RADEON(0): v_active: 1200 v_sync: 1246 v_sync_end 1249 v_blanking: 1250 v_border: 0
(II) RADEON(0): Serial No: 59119C9CBMC8
(II) RADEON(0): Monitor name: DELL D1226H
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 95 kHz,
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=25000
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(WW) RADEON(0): config file hsync range 30-200kHz not within DDC hsync ranges.
(WW) RADEON(0): config file vrefresh range 40-200Hz not within DDC vrefresh ranges.
(II) RADEON(0): Radeon: Using hsync range of 30.00-200.00 kHz
(II) RADEON(0): Radeon: Using vrefresh range of 40.00-200.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(WW) (640x350,Radeon) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(WW) (640x400,Radeon) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(WW) (720x400,Radeon) mode clock 35.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(WW) (640x480,Radeon) mode clock 25.2MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,Radeon) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,Radeon) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,Radeon) mode clock 36MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (800x600,Radeon) mode clock 36MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,Radeon) mode clock 40MHz exceeds DDC maximum 0MHz
(WW) (400x300,Radeon) mode clock 20MHz exceeds DDC maximum 0MHz
(WW) (800x600,Radeon) mode clock 50MHz exceeds DDC maximum 0MHz
(WW) (400x300,Radeon) mode clock 25MHz exceeds DDC maximum 0MHz
(WW) (800x600,Radeon) mode clock 49.5MHz exceeds DDC maximum 0MHz
(WW) (400x300,Radeon) mode clock 24.75MHz exceeds DDC maximum 0MHz
(WW) (800x600,Radeon) mode clock 56.3MHz exceeds DDC maximum 0MHz
(WW) (400x300,Radeon) mode clock 28.15MHz exceeds DDC maximum 0MHz
(WW) (1024x768,Radeon) mode clock 44.9MHz exceeds DDC maximum 0MHz
(WW) (512x384,Radeon) mode clock 22.45MHz exceeds DDC maximum 0MHz
(WW) (1024x768,Radeon) mode clock 65MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Radeon) mode clock 75MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Radeon) mode clock 78.8MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Radeon) mode clock 94.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1152x864,Radeon) mode clock 108MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Radeon) mode clock 108MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Radeon) mode clock 148.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Radeon) mode clock 108MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Radeon) mode clock 135MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Radeon) mode clock 157.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Radeon) mode clock 162MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Radeon) mode clock 175.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Radeon) mode clock 189MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Radeon) mode clock 202.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Radeon) mode clock 229.5MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Radeon) mode clock 204.8MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Radeon) mode clock 261MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Radeon) mode clock 218.3MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Radeon) mode clock 288MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Radeon) mode clock 234MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Radeon) mode clock 297MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(WW) (832x624,Radeon) mode clock 57.284MHz exceeds DDC maximum 0MHz
(WW) (416x312,Radeon) mode clock 28.642MHz exceeds DDC maximum 0MHz
(WW) (1152x768,Radeon) mode clock 64.995MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Radeon) mode clock 122MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Radeon) mode clock 155.8MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1600x1024,Radeon) mode clock 106.91MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(WW) (1920x1440,Radeon) mode clock 341.35MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Radeon) mode clock 266.95MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Radeon) mode clock 340.48MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) (2048x1536,Radeon) mode clock 388.04MHz exceeds DDC maximum 0MHz
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1280x1024" (height too large for virtual size)
(--) RADEON(0): Virtual size is 1280x960 (pitch 1280)
(**) RADEON(0): *Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RADEON(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) RADEON(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) RADEON(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) RADEON(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) RADEON(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) RADEON(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) RADEON(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) RADEON(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) RADEON(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) RADEON(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) RADEON(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) RADEON(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) RADEON(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) RADEON(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) RADEON(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) RADEON(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) RADEON(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) RADEON(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) RADEON(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) RADEON(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) RADEON(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) RADEON(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) RADEON(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) RADEON(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) RADEON(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) RADEON(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) RADEON(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) RADEON(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(--) RADEON(0): Display dimensions: (340, 250) mm
(--) RADEON(0): DPI set to (95, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8030000 - 0xe803ffff (0x10000) MX
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[7] -1 0 0xe9001000 - 0xe9001fff (0x1000) MXE
[8] -1 0 0xe9000000 - 0xe9000fff (0x1000) MXE
[9] -1 0 0xea001000 - 0xea001fff (0x1000) MXE
[10] -1 0 0xea000000 - 0xea000fff (0x1000) MXE
[11] -1 0 0xea005000 - 0xea005fff (0x1000) MXE
[12] -1 0 0xea004000 - 0xea004fff (0x1000) MXE
[13] -1 0 0xea003000 - 0xea003fff (0x1000) MXE
[14] -1 0 0xd0000000 - 0xcfffffff (0x0) MXEO
[15] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX(B)
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
[17] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX(B)
[18] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS(OprU)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS(OprU)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS(OprU)
[22] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX
[25] -1 0 0x0000c300 - 0x0000c3ff (0x100) IXE
[26] -1 0 0x0000c200 - 0x0000c2ff (0x100) IXE
[27] -1 0 0x0000c100 - 0x0000c1ff (0x100) IXE
[28] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXE
[29] -1 0 0x0000ea00 - 0x0000eaff (0x100) IXE
[30] -1 0 0x0000e900 - 0x0000e9ff (0x100) IXE
[31] -1 0 0x00000b70 - 0x00000b7f (0x10) IXE
[32] -1 0 0x00000970 - 0x0000097f (0x10) IXE
[33] -1 0 0x00000bf0 - 0x00000bff (0x10) IXE
[34] -1 0 0x000009f0 - 0x000009ff (0x10) IXE
[35] -1 0 0x0000f000 - 0x0000f0ff (0x100) IXE
[36] -1 0 0x0000e100 - 0x0000e1ff (0x100) IXE
[37] -1 0 0x0000e000 - 0x0000e0ff (0x100) IXE
[38] -1 0 0x0000eb00 - 0x0000ebff (0x100) IXE
[39] -1 0 0x0000e400 - 0x0000e4ff (0x100) IXE
[40] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX(B)
[41] 0 0 0x000003b0 - 0x000003bb (0xc) IS(OprU)
[42] 0 0 0x000003c0 - 0x000003df (0x20) IS(OprU)
(==) RADEON(0): Write-combining range (0xe8030000,0x80000) was already clear
(==) RADEON(0): Write-combining range (0xd8000000,0x8000000)
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:02:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
(II) RADEON(0): [drm] loaded kernel module for "radeon" driver
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:02:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xc32f8000
(II) RADEON(0): [drm] mapped SAREA 0xc32f8000 to 0x283d0000
(II) RADEON(0): [drm] framebuffer handle = 0xd8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000201 [AGP 0x0000/0x0000; Card 0x1002/0x4966]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0xc36dce40
(II) RADEON(0): [agp] ring handle = 0xd0000000
(II) RADEON(0): [agp] Ring mapped at 0x30430000
(II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0x282d6000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x30531000
(II) RADEON(0): [agp] GART texture map handle = 0xd0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0x30731000
(II) RADEON(0): [drm] register handle = 0xe8030000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,960) to (1280,962)
(II) RADEON(0): Largest offscreen area available: 1280 x 7229
(II) RADEON(0): Will use back buffer at offset 0x14a0000
(II) RADEON(0): Will use depth buffer at offset 0x1950000
(II) RADEON(0): Will use 100352 kb for textures at offset 0x1e00000
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 962)
(II) RADEON(0): Largest offscreen area available: 1280 x 7225
(II) RADEON(0): X context handle = 0x00000001
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 19
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "SysMouse"
(**) Mouse1: Device: "/dev/sysmouse"
(**) Mouse1: Protocol: "SysMouse"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/sysmouse"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "2"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(**) Mouse1: BaudRate: 1200
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll,altwin:left_meta_win"
(**) Keyboard1: XkbOptions: "grp:ctrl_shift_toggle,grp_led:scroll,altwin:left_meta_win"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xc32f8000 at 0x283d0000
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
xorg.conf
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
Load "int10"
Load "vbe"
Load "drm"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll,altwin:left_meta_win"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "SysMouse"
Option "Device" "/dev/sysmouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Radeon"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-200
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-200
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "Radeon"
Driver "radeon"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Radeon"
Monitor "Radeon"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x960" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x960" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x960" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
