forum.opennet.ru

Составление сообщения

Исходное сообщение

"При нагрузке теряется физическое сетевое подключение"
Отправлено ASTemo, 13-Сен-08 03:17

Спасибо за ответы.
angra, извиняюсь за то, что не раскрыл полную картину.
Все на так просто, я голову сломал над этой проблемой, ни один совет из Гугула не помогает, но похоже я далеко не единственный с такой проблемой.
Итак, что есть:
Сервер под управлением Fedora 9, ядро обновил до 2.6.26.3-29.fc9.i686. На нем стоит две сетевых карты - встроенный Broadcom b44 и D-link DGE-550T. По одной сервер соединен с одним коммутатором, по другой - с другим. К каждому коммутатору подключены разные рабочие станции под управлением Windows XP.
Железо 100% рабочее, только что взял чистый винчестер и поставил на этот сервер Windows 2003 - все работает. Т.е. дело не в проводах и оборудовании.
Проблемы:
1. при большой сетевой нагрузке (закачке на сервер файла размером 500МБ по smb или по ftp) через 5-10 СЕКУНД сетевая карта D-link DGE-550T (через нее идет закачка) отваливается, т.е. устройство есть, но ping не идет. Помогает ТОЛЬКО перезагрузка сервера.
2. То же, только в профиль. При закачке через Broadcom возрастает ping до этого интерфейса, возникают потери (около 40%). Как только перестаю закачивать - все ОК.
Что пробовал и это не дало никакого результата:
1. вытащить одну из сетевок
2. отключить в BIOS встроенную сетевку
3. отключить в параметрах загрузки ядра ACPI (совет из гугла)
4. отключить в параметрах загрузки ядра APIC (совет из гугла)
5. поставил Windows 2003 и убедился, что железо рабочее.
Логи:
dmesg:
Initializing cgroup subsys cpuset
Linux version 2.6.26.3-29.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:42:27 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004ffec000 (usable)
BIOS-e820: 000000004ffec000 - 000000004ffef000 (ACPI data)
BIOS-e820: 000000004ffef000 - 000000004ffff000 (reserved)
BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
383MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 327660) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   327660
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   327660
On node 0 totalpages: 327660
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 768 pages used for memmap
  HighMem zone: 97516 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F5360, 0014 (r0 ASUS  )
ACPI: RSDT 4FFEC000, 0030 (r1 ASUS   P4PE     42302E31 MSFT 31313031)
ACPI: FACP 4FFEC0C0, 0074 (r1 ASUS   P4PE     42302E31 MSFT 31313031)
ACPI: DSDT 4FFEC134, 2A43 (r1   ASUS P4PE         1000 MSFT  100000B)
ACPI: FACS 4FFFF000, 0040
ACPI: BOOT 4FFEC030, 0028 (r1 ASUS   P4PE     42302E31 MSFT 31313031)
ACPI: APIC 4FFEC058, 005A (r1 ASUS   P4PE     42302E31 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PERCPU: Allocating 40872 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 325100
Kernel command line: ro root=UUID=62dd01b8-c8de-4719-9d93-07c8af051150
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07c6000 soft=c07a6000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2405.523 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1290940k/1310640k available (2257k kernel code, 18372k reserved, 1152k data, 284k init, 393136k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc075c000 - 0xc07a3000   ( 284 kB)
      .data : 0xc0634770 - 0xc0754980   (1152 kB)
      .text : 0xc0400000 - 0xc0634770   (2257 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 4814.59 BogoMIPS (lpj=2407299)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Brought up 1 CPUs
Total of 1 processors activated (4814.59 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3188 bytes
CPU0 attaching sched-domain:
domain 0: span 0
  groups: 0
net_namespace: 660 bytes
Booting paravirtualized kernel on bare hardware
Time:  2:29:37  Date: 09/13/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1e60, last bus=2
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x4fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe800-0xe81f has been reserved
system 00:02: ioport range 0xec00-0xec3f has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:0e: ioport range 0x3f0-0x3f1 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: d000-dfff
  MEM window: 0xef000000-0xefdfffff
  PREFETCH window: 0x00000000eff00000-0x00000000f7ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 9000-afff
  MEM window: 0xed000000-0xee7fffff
  PREFETCH window: 0x00000000efe00000-0x00000000efefffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 2655k freed
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1221272976.448:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1760
SELinux:  Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Invalid PBLK length [5]
ACPI: ACPI0007:00 is registered as cooling_device0
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 8:130:460
Freeing unused kernel memory: 284k freed
Write protecting the kernel text: 2260k
Write protecting the kernel read-only data: 940k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee800000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata1.00: ATAPI: _NEC DVD_RW ND-4550A, 1.84, max UDMA/33
ata1.01: ATA-7: Maxtor 6Y080L0, YAR41VW0, max UDMA/133
ata1.01: 160086528 sectors, multi 16: LBA
ata1.01: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.84 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:1:0: [sda] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: 8192 avtab hash slots, 171554 rules.
SELinux: 8192 avtab hash slots, 171554 rules.
SELinux:  8 users, 12 roles, 2379 types, 117 bools, 1 sens, 1024 cats
SELinux:  72 classes, 171554 rules
SELinux:  permission open in class dir not defined in policy
SELinux:  permission open in class file not defined in policy
SELinux:  permission open in class chr_file not defined in policy
SELinux:  permission open in class blk_file not defined in policy
SELinux:  permission open in class fifo_file not defined in policy
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
type=1403 audit(1221272984.307:2): policy loaded auid=4294967295 ses=4294967295
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rng: FWH not detected
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 0:0:1:0: Attached scsi generic sg1 type 0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
0000:02:0c.0: D-Link NIC
Ethernet device registered as: eth0
ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 17
sata_sil 0000:02:0d.0: version 2.3
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed000080 irq 21
ata4: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed0000c0 irq 21
input: PC Speaker as /devices/platform/pcspkr/input/input4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: ATA-8: ST31000340AS, SD15, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 784kHz
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133
ata4.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      ST31000340AS     SD15 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6V200E0   VA11 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
b44.c:v2.0
eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:6e:4c:0d:b1
ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 50392 usecs
intel8x0: clocking to 48000
ppdev: user-space parallel port driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
EXT3 FS on sda1, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdc1, type ext3), uses xattr
Adding 3100536k swap on /dev/sda2.  Priority:-1 extents:1 across:3100536k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
messages:
Sep 13 06:30:07 AlexSRVZ kernel: imklog 3.18.1, log source = /proc/kmsg started.
Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys cpuset
Sep 13 06:30:07 AlexSRVZ kernel: Linux version 2.6.26.3-29.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:42:27 EDT 2008
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-provided physical RAM map:
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 0000000000100000 - 000000004ffec000 (usable)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffec000 - 000000004ffef000 (ACPI data)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffef000 - 000000004ffff000 (reserved)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Sep 13 06:30:07 AlexSRVZ kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep 13 06:30:07 AlexSRVZ kernel: 383MB HIGHMEM available.
Sep 13 06:30:07 AlexSRVZ kernel: 896MB LOWMEM available.
Sep 13 06:30:07 AlexSRVZ kernel: Using x86 segment limits to approximate NX protection
Sep 13 06:30:07 AlexSRVZ kernel: Zone PFN ranges:
Sep 13 06:30:07 AlexSRVZ kernel:  DMA             0 ->     4096
Sep 13 06:30:07 AlexSRVZ kernel:  Normal       4096 ->   229376
Sep 13 06:30:07 AlexSRVZ kernel:  HighMem    229376 ->   327660
Sep 13 06:30:07 AlexSRVZ kernel: Movable zone start PFN for each node
Sep 13 06:30:07 AlexSRVZ kernel: early_node_map[1] active PFN ranges
Sep 13 06:30:07 AlexSRVZ kernel:    0:        0 ->   327660
Sep 13 06:30:07 AlexSRVZ kernel: DMI 2.3 present.
Sep 13 06:30:07 AlexSRVZ kernel: Using APIC driver default
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RSDP 000F5360, 0014 (r0 ASUS  )
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RSDT 4FFEC000, 0030 (r1 ASUS   P4PE     42302E31 MSFT 31313031)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: FACP 4FFEC0C0, 0074 (r1 ASUS   P4PE     42302E31 MSFT 31313031)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: DSDT 4FFEC134, 2A43 (r1   ASUS P4PE         1000 MSFT  100000B)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: FACS 4FFFF000, 0040
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: BOOT 4FFEC030, 0028 (r1 ASUS   P4PE     42302E31 MSFT 31313031)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: APIC 4FFEC058, 005A (r1 ASUS   P4PE     42302E31 MSFT 31313031)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PM-Timer IO Port: 0xe408
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 13 06:30:07 AlexSRVZ kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
Sep 13 06:30:07 AlexSRVZ kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep 13 06:30:07 AlexSRVZ kernel: Using ACPI (MADT) for SMP configuration information
Sep 13 06:30:07 AlexSRVZ kernel: Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Sep 13 06:30:07 AlexSRVZ kernel: SMP: Allowing 1 CPUs, 0 hotplug CPUs
Sep 13 06:30:07 AlexSRVZ kernel: PERCPU: Allocating 40872 bytes of per cpu data
Sep 13 06:30:07 AlexSRVZ kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 325100
Sep 13 06:30:07 AlexSRVZ kernel: Kernel command line: ro root=UUID=62dd01b8-c8de-4719-9d93-07c8af051150
Sep 13 06:30:07 AlexSRVZ kernel: Enabling fast FPU save and restore... done.
Sep 13 06:30:07 AlexSRVZ kernel: Enabling unmasked SIMD FPU exception support... done.
Sep 13 06:30:07 AlexSRVZ kernel: Initializing CPU#0
Sep 13 06:30:07 AlexSRVZ kernel: CPU 0 irqstacks, hard=c07c6000 soft=c07a6000
Sep 13 06:30:07 AlexSRVZ kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Sep 13 06:30:07 AlexSRVZ kernel: Detected 2405.523 MHz processor.
Sep 13 06:30:07 AlexSRVZ kernel: Console: colour VGA+ 80x25
Sep 13 06:30:07 AlexSRVZ kernel: console [tty0] enabled
Sep 13 06:30:07 AlexSRVZ kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep 13 06:30:07 AlexSRVZ kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep 13 06:30:07 AlexSRVZ kernel: Memory: 1290940k/1310640k available (2257k kernel code, 18372k reserved, 1152k data, 284k init, 393136k highmem)
Sep 13 06:30:07 AlexSRVZ kernel: virtual kernel memory layout:
Sep 13 06:30:07 AlexSRVZ kernel:    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
Sep 13 06:30:07 AlexSRVZ kernel:    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
Sep 13 06:30:07 AlexSRVZ kernel:    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
Sep 13 06:30:07 AlexSRVZ kernel:    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Sep 13 06:30:07 AlexSRVZ kernel:      .init : 0xc075c000 - 0xc07a3000   ( 284 kB)
Sep 13 06:30:07 AlexSRVZ kernel:      .data : 0xc0634770 - 0xc0754980   (1152 kB)
Sep 13 06:30:07 AlexSRVZ kernel:      .text : 0xc0400000 - 0xc0634770   (2257 kB)
Sep 13 06:30:07 AlexSRVZ kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep 13 06:30:07 AlexSRVZ kernel: SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sep 13 06:30:07 AlexSRVZ kernel: Calibrating delay using timer specific routine.. 4814.59 BogoMIPS (lpj=2407299)
Sep 13 06:30:07 AlexSRVZ kernel: Security Framework initialized
Sep 13 06:30:07 AlexSRVZ kernel: SELinux:  Initializing.
Sep 13 06:30:07 AlexSRVZ kernel: selinux_register_security:  Registering secondary module capability
Sep 13 06:30:07 AlexSRVZ kernel: Capability LSM initialized as secondary
Sep 13 06:30:07 AlexSRVZ kernel: Mount-cache hash table entries: 512
Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys ns
Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys cpuacct
Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys devices
Sep 13 06:30:07 AlexSRVZ kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Sep 13 06:30:07 AlexSRVZ kernel: CPU: L2 cache: 512K
Sep 13 06:30:07 AlexSRVZ kernel: CPU: Hyper-Threading is disabled
Sep 13 06:30:07 AlexSRVZ kernel: Intel machine check architecture supported.
Sep 13 06:30:07 AlexSRVZ kernel: Intel machine check reporting enabled on CPU#0.
Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Thermal monitoring enabled
Sep 13 06:30:07 AlexSRVZ kernel: Checking 'hlt' instruction... OK.
Sep 13 06:30:07 AlexSRVZ kernel: SMP alternatives: switching to UP code
Sep 13 06:30:07 AlexSRVZ kernel: Freeing SMP alternatives: 20k freed
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Core revision 20080321
Sep 13 06:30:07 AlexSRVZ kernel: ENABLING IO-APIC IRQs
Sep 13 06:30:07 AlexSRVZ kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Sep 13 06:30:07 AlexSRVZ kernel: Brought up 1 CPUs
Sep 13 06:30:07 AlexSRVZ kernel: Total of 1 processors activated (4814.59 BogoMIPS).
Sep 13 06:30:07 AlexSRVZ kernel: net_namespace: 660 bytes
Sep 13 06:30:07 AlexSRVZ kernel: Booting paravirtualized kernel on bare hardware
Sep 13 06:30:07 AlexSRVZ kernel: Time:  2:29:37  Date: 09/13/08
Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 16
Sep 13 06:30:07 AlexSRVZ kernel: No dock devices found.
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: bus type pci registered
Sep 13 06:30:07 AlexSRVZ kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1e60, last bus=2
Sep 13 06:30:07 AlexSRVZ kernel: PCI: Using configuration type 1 for base access
Sep 13 06:30:07 AlexSRVZ kernel: Setting up standard PCI resources
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Interpreter enabled
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: (supports S0 S1 S4 S5)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Using IOAPIC for interrupt routing
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep 13 06:30:07 AlexSRVZ kernel: * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
Sep 13 06:30:07 AlexSRVZ kernel: * this clock source is slow. If you are sure your timer does not have
Sep 13 06:30:07 AlexSRVZ kernel: * this bug, please use "acpi_pm_good" to disable the workaround
Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: Enabled i801 SMBus device
Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
Sep 13 06:30:07 AlexSRVZ kernel: PCI: Transparent bridge - 0000:00:1e.0
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Sep 13 06:30:07 AlexSRVZ kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Sep 13 06:30:07 AlexSRVZ kernel: pnp: PnP ACPI init
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: bus type pnp registered
Sep 13 06:30:07 AlexSRVZ kernel: pnp: PnP ACPI: found 15 devices
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: ACPI bus type pnp unregistered
Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver usbfs
Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver hub
Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new device driver usb
Sep 13 06:30:07 AlexSRVZ kernel: PCI: Using ACPI for IRQ routing
Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: Initializing
Sep 13 06:30:07 AlexSRVZ kernel: NetLabel:  domain hash size = 128
Sep 13 06:30:07 AlexSRVZ kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Sep 13 06:30:07 AlexSRVZ kernel: NetLabel:  unlabeled traffic allowed by default
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RTC can wake from S4
Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0x0-0x9ffff could not be reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xf0000-0xfffff could not be reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0x100000-0x4fffffff could not be reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xe400-0xe47f has been reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xe800-0xe81f has been reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xec00-0xec3f has been reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0x4d6-0x4d6 has been reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Sep 13 06:30:07 AlexSRVZ kernel: system 00:0e: ioport range 0x3f0-0x3f1 has been reserved
Sep 13 06:30:07 AlexSRVZ kernel: PCI: Bridge: 0000:00:01.0
Sep 13 06:30:07 AlexSRVZ kernel:  IO window: d000-dfff
Sep 13 06:30:07 AlexSRVZ kernel:  MEM window: 0xef000000-0xefdfffff
Sep 13 06:30:07 AlexSRVZ kernel:  PREFETCH window: 0x00000000eff00000-0x00000000f7ffffff
Sep 13 06:30:07 AlexSRVZ kernel: PCI: Bridge: 0000:00:1e.0
Sep 13 06:30:07 AlexSRVZ kernel:  IO window: 9000-afff
Sep 13 06:30:07 AlexSRVZ kernel:  MEM window: 0xed000000-0xee7fffff
Sep 13 06:30:07 AlexSRVZ kernel:  PREFETCH window: 0x00000000efe00000-0x00000000efefffff
Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 2
Sep 13 06:30:07 AlexSRVZ kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep 13 06:30:07 AlexSRVZ kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 13 06:30:07 AlexSRVZ kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep 13 06:30:07 AlexSRVZ kernel: TCP: Hash tables configured (established 131072 bind 65536)
Sep 13 06:30:07 AlexSRVZ kernel: TCP reno registered
Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 1
Sep 13 06:30:07 AlexSRVZ kernel: checking if image is initramfs... it is
Sep 13 06:30:07 AlexSRVZ kernel: Freeing initrd memory: 2655k freed
Sep 13 06:30:07 AlexSRVZ kernel: Simple Boot Flag at 0x3a set to 0x1
Sep 13 06:30:07 AlexSRVZ kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Sep 13 06:30:07 AlexSRVZ kernel: apm: overridden by ACPI.
Sep 13 06:30:07 AlexSRVZ kernel: audit: initializing netlink socket (disabled)
Sep 13 06:30:07 AlexSRVZ kernel: type=2000 audit(1221272976.448:1): initialized
Sep 13 06:30:07 AlexSRVZ kernel: highmem bounce pool size: 64 pages
Sep 13 06:30:07 AlexSRVZ kernel: Total HugeTLB memory allocated, 0
Sep 13 06:30:07 AlexSRVZ kernel: VFS: Disk quotas dquot_6.5.1
Sep 13 06:30:07 AlexSRVZ kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep 13 06:30:07 AlexSRVZ kernel: msgmni has been set to 1760
Sep 13 06:30:07 AlexSRVZ kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Sep 13 06:30:07 AlexSRVZ kernel: io scheduler noop registered
Sep 13 06:30:07 AlexSRVZ kernel: io scheduler anticipatory registered
Sep 13 06:30:07 AlexSRVZ kernel: io scheduler deadline registered
Sep 13 06:30:07 AlexSRVZ kernel: io scheduler cfq registered (default)
Sep 13 06:30:07 AlexSRVZ kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 13 06:30:07 AlexSRVZ kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Power Button (FF) [PWRF]
Sep 13 06:30:07 AlexSRVZ kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Power Button (CM) [PWRB]
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Invalid PBLK length [5]
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: ACPI0007:00 is registered as cooling_device0
Sep 13 06:30:07 AlexSRVZ kernel: isapnp: Scanning for PnP cards...
Sep 13 06:30:07 AlexSRVZ kernel: isapnp: No Plug & Play device found
Sep 13 06:30:07 AlexSRVZ kernel: Non-volatile memory driver v1.2
Sep 13 06:30:07 AlexSRVZ kernel: Linux agpgart interface v0.103
Sep 13 06:30:07 AlexSRVZ kernel: agpgart: Detected an Intel 830M Chipset.
Sep 13 06:30:07 AlexSRVZ kernel: agpgart: AGP aperture is 64M @ 0xf8000000
Sep 13 06:30:07 AlexSRVZ kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Sep 13 06:30:07 AlexSRVZ kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 13 06:30:07 AlexSRVZ kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep 13 06:30:07 AlexSRVZ kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 13 06:30:07 AlexSRVZ kernel: 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep 13 06:30:07 AlexSRVZ kernel: brd: module loaded
Sep 13 06:30:07 AlexSRVZ kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input2
Sep 13 06:30:07 AlexSRVZ kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Sep 13 06:30:07 AlexSRVZ kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Sep 13 06:30:07 AlexSRVZ kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 13 06:30:07 AlexSRVZ kernel: mice: PS/2 mouse device common for all mice
Sep 13 06:30:07 AlexSRVZ kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Sep 13 06:30:07 AlexSRVZ kernel: rtc0: alarms up to one month
Sep 13 06:30:07 AlexSRVZ kernel: cpuidle: using governor ladder
Sep 13 06:30:07 AlexSRVZ kernel: cpuidle: using governor menu
Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver hiddev
Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver usbhid
Sep 13 06:30:07 AlexSRVZ kernel: usbhid: v2.6:USB HID core driver
Sep 13 06:30:07 AlexSRVZ kernel: TCP cubic registered
Sep 13 06:30:07 AlexSRVZ kernel: Initializing XFRM netlink socket
Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 17
Sep 13 06:30:07 AlexSRVZ kernel: Using IPI No-Shortcut mode
Sep 13 06:30:07 AlexSRVZ kernel: registered taskstats version 1
Sep 13 06:30:07 AlexSRVZ kernel:  Magic number: 8:130:460
Sep 13 06:30:07 AlexSRVZ kernel: Freeing unused kernel memory: 284k freed
Sep 13 06:30:07 AlexSRVZ kernel: Write protecting the kernel text: 2260k
Sep 13 06:30:07 AlexSRVZ kernel: Write protecting the kernel read-only data: 940k
Sep 13 06:30:07 AlexSRVZ kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: debug port 1
Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee800000
Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: configuration #1 chosen from 1 choice
Sep 13 06:30:07 AlexSRVZ kernel: hub 1-0:1.0: USB hub found
Sep 13 06:30:07 AlexSRVZ kernel: hub 1-0:1.0: 6 ports detected
Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: Product: EHCI Host Controller
Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ehci_hcd
Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: SerialNumber: 0000:00:1d.7
Sep 13 06:30:07 AlexSRVZ kernel: USB Universal Host Controller Interface driver v3.0
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: configuration #1 chosen from 1 choice
Sep 13 06:30:07 AlexSRVZ kernel: hub 2-0:1.0: USB hub found
Sep 13 06:30:07 AlexSRVZ kernel: hub 2-0:1.0: 2 ports detected
Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: Product: UHCI Host Controller
Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd
Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: SerialNumber: 0000:00:1d.0
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: configuration #1 chosen from 1 choice
Sep 13 06:30:07 AlexSRVZ kernel: hub 3-0:1.0: USB hub found
Sep 13 06:30:07 AlexSRVZ kernel: hub 3-0:1.0: 2 ports detected
Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: Product: UHCI Host Controller
Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd
Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: SerialNumber: 0000:00:1d.1
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000
Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: configuration #1 chosen from 1 choice
Sep 13 06:30:07 AlexSRVZ kernel: hub 4-0:1.0: USB hub found
Sep 13 06:30:07 AlexSRVZ kernel: hub 4-0:1.0: 2 ports detected
Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: Product: UHCI Host Controller
Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd
Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: SerialNumber: 0000:00:1d.2
Sep 13 06:30:07 AlexSRVZ kernel: SCSI subsystem initialized
Sep 13 06:30:07 AlexSRVZ kernel: Driver 'sd' needs updating - please use bus_type methods
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Sep 13 06:30:07 AlexSRVZ kernel: scsi0 : ata_piix
Sep 13 06:30:07 AlexSRVZ kernel: scsi1 : ata_piix
Sep 13 06:30:07 AlexSRVZ kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Sep 13 06:30:07 AlexSRVZ kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Sep 13 06:30:07 AlexSRVZ kernel: ata1.00: ATAPI: _NEC DVD_RW ND-4550A, 1.84, max UDMA/33
Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: ATA-7: Maxtor 6Y080L0, YAR41VW0, max UDMA/133
Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: 160086528 sectors, multi 16: LBA
Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: limited to UDMA/33 due to 40-wire cable
Sep 13 06:30:07 AlexSRVZ kernel: ata1.00: configured for UDMA/33
Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: configured for UDMA/33
Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:0:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.84 PQ: 0 ANSI: 5
Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write Protect is off
Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write Protect is off
Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 13 06:30:07 AlexSRVZ kernel: sda: sda1 sda2
Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Attached SCSI disk
Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting.  Commit interval 5 seconds
Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 06:30:07 AlexSRVZ kernel: SELinux:  permission open in class dir not defined in policy
Sep 13 06:30:07 AlexSRVZ kernel: SELinux:  permission open in class file not defined in policy
Sep 13 06:30:07 AlexSRVZ kernel: SELinux:  permission open in class chr_file not defined in policy
Sep 13 06:30:07 AlexSRVZ kernel: SELinux:  permission open in class blk_file not defined in policy
Sep 13 06:30:07 AlexSRVZ kernel: SELinux:  permission open in class fifo_file not defined in policy
Sep 13 06:30:07 AlexSRVZ kernel: SELinux: policy loaded with handle_unknown=allow
Sep 13 06:30:07 AlexSRVZ kernel: type=1403 audit(1221272984.307:2): policy loaded auid=4294967295 ses=4294967295
Sep 13 06:30:07 AlexSRVZ kernel: iTCO_vendor_support: vendor-support=0
Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460)
Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Sep 13 06:30:07 AlexSRVZ kernel: intel_rng: FWH not detected
Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:0:0: Attached scsi generic sg0 type 5
Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0
Sep 13 06:30:07 AlexSRVZ kernel: Driver 'sr' needs updating - please use bus_type methods
Sep 13 06:30:07 AlexSRVZ kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Sep 13 06:30:07 AlexSRVZ kernel: Uniform CD-ROM driver Revision: 3.20
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
Sep 13 06:30:07 AlexSRVZ kernel: 0000:02:0c.0: D-Link NIC
Sep 13 06:30:07 AlexSRVZ kernel: Ethernet device registered as: eth0
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 17
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
Sep 13 06:30:07 AlexSRVZ kernel: scsi2 : sata_sil
Sep 13 06:30:07 AlexSRVZ kernel: scsi3 : sata_sil
Sep 13 06:30:07 AlexSRVZ kernel: ata3: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed000080 irq 21
Sep 13 06:30:07 AlexSRVZ kernel: ata4: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed0000c0 irq 21
Sep 13 06:30:07 AlexSRVZ kernel: input: PC Speaker as /devices/platform/pcspkr/input/input4
Sep 13 06:30:07 AlexSRVZ kernel: Floppy drive(s): fd0 is 1.44M
Sep 13 06:30:07 AlexSRVZ kernel: FDC 0 is a post-1991 82077
Sep 13 06:30:07 AlexSRVZ kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: ATA-8: ST31000340AS, SD15, max UDMA/133
Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: configured for UDMA/100
Sep 13 06:30:07 AlexSRVZ kernel: gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 784kHz
Sep 13 06:30:07 AlexSRVZ kernel: parport_pc 00:09: reported by Plug and Play ACPI
Sep 13 06:30:07 AlexSRVZ kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Sep 13 06:30:07 AlexSRVZ kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133
Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: configured for UDMA/100
Sep 13 06:30:07 AlexSRVZ kernel: scsi 2:0:0:0: Direct-Access     ATA      ST31000340AS     SD15 PQ: 0 ANSI: 5
Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write Protect is off
Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write Protect is off
Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 13 06:30:07 AlexSRVZ kernel: sdb: sdb1
Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Sep 13 06:30:07 AlexSRVZ kernel: scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6V200E0   VA11 PQ: 0 ANSI: 5
Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write Protect is off
Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write Protect is off
Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 13 06:30:07 AlexSRVZ kernel: sdc: sdc1
Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
Sep 13 06:30:07 AlexSRVZ kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
Sep 13 06:30:07 AlexSRVZ kernel: b44.c:v2.0
Sep 13 06:30:07 AlexSRVZ kernel: eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:6e:4c:0d:b1
Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 17
Sep 13 06:30:07 AlexSRVZ kernel: AC'97 0 analog subsections not ready
Sep 13 06:30:07 AlexSRVZ kernel: intel8x0_measure_ac97_clock: measured 50392 usecs
Sep 13 06:30:07 AlexSRVZ kernel: intel8x0: clocking to 48000
Sep 13 06:30:07 AlexSRVZ kernel: ppdev: user-space parallel port driver
Sep 13 06:30:07 AlexSRVZ kernel: device-mapper: uevent: version 1.0.3
Sep 13 06:30:07 AlexSRVZ kernel: device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sda1, internal journal
Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting.  Commit interval 5 seconds
Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sdb1, internal journal
Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting.  Commit interval 5 seconds
Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sdc1, internal journal
Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 06:30:07 AlexSRVZ kernel: Adding 3100536k swap on /dev/sda2.  Priority:-1 extents:1 across:3100536k
Sep 13 06:30:07 AlexSRVZ kernel: firmware: requesting intel-ucode/0f-02-07
Sep 13 06:30:07 AlexSRVZ kernel: IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Sep 13 06:30:07 AlexSRVZ kernel: microcode: CPU0 updated from revision 0x33 to 0x37, date = 06042003
Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 10
Sep 13 06:30:07 AlexSRVZ kernel: lo: Disabled Privacy Extensions
Sep 13 06:30:07 AlexSRVZ kernel: eth0: Link speed = 1000Mbps.
Sep 13 06:30:07 AlexSRVZ kernel: eth0: setting full duplex, TX flow control, RX flow control.
Sep 13 06:30:07 AlexSRVZ kernel: eth0: Link speed = 1000Mbps.
Sep 13 06:30:07 AlexSRVZ kernel: eth0: setting full duplex, TX flow control, RX flow control.
Sep 13 06:30:07 AlexSRVZ kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Sep 13 06:30:07 AlexSRVZ kernel: b44: eth1: Link is up at 100 Mbps, full duplex.
Sep 13 06:30:07 AlexSRVZ kernel: b44: eth1: Flow control is off for TX and off for RX.
Sep 13 06:30:07 AlexSRVZ kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Sep 13 06:30:07 AlexSRVZ kernel: type=1400 audit(1221273007.376:3): avc:  denied  { search } for  pid=1629 comm="rsyslogd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:30:07 AlexSRVZ rsyslogd: [origin software="rsyslogd" swVersion="3.18.1" x-pid="1630" x-info="http://www.rsyslog.com"] restart
Sep 13 06:30:07 AlexSRVZ kernel: type=1400 audit(1221273007.603:4): avc:  denied  { search } for  pid=1640 comm="irqbalance" name="/" dev=sda1 ino=2 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:30:07 AlexSRVZ kernel: warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
Sep 13 06:30:08 AlexSRVZ acpid: starting up
Sep 13 06:30:08 AlexSRVZ kernel: type=1400 audit(1221273008.435:5): avc:  denied  { search } for  pid=1665 comm="console-kit-dae" name="/" dev=sda1 ino=2 scontext=system_u:system_r:consolekit_t:s0-s0:c0.c1023 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:30:08 AlexSRVZ kernel: type=1400 audit(1221273008.754:6): avc:  denied  { search } for  pid=1731 comm="hal-acl-tool" name="/" dev=sda1 ino=2 scontext=system_u:system_r:hald_acl_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:30:09 AlexSRVZ acpid: client connected from 1755[68:68]
Sep 13 06:30:10 AlexSRVZ named[1793]: starting BIND 9.5.0-P2 -u named
Sep 13 06:30:10 AlexSRVZ named[1793]: found 1 CPU, using 1 worker thread
Sep 13 06:30:10 AlexSRVZ named[1793]: loading configuration from '/etc/named.conf'
Sep 13 06:30:10 AlexSRVZ named[1793]: the working directory is not writable
Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface lo, 127.0.0.1#53
Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface eth0, 192.168.0.10#53
Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface eth1, 10.10.47.11#53
Sep 13 06:30:10 AlexSRVZ named[1793]: default max-cache-size (33554432) applies
Sep 13 06:30:10 AlexSRVZ named[1793]: default max-cache-size (33554432) applies: view _bind
Sep 13 06:30:10 AlexSRVZ named[1793]: command channel listening on 127.0.0.1#953
Sep 13 06:30:10 AlexSRVZ named[1793]: command channel listening on ::1#953
Sep 13 06:30:10 AlexSRVZ named[1793]: zone 0.in-addr.arpa/IN: NS '0.in-addr.arpa' has no address records (A or AAAA)
Sep 13 06:30:10 AlexSRVZ named[1793]: zone 0.in-addr.arpa/IN: loaded serial 0
Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.127.in-addr.arpa/IN: NS '1.0.0.127.in-addr.arpa' has no address records (A or AAAA)
Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.127.in-addr.arpa/IN: loaded serial 0
Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: NS '1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa' has no address records (A or AAAA)
Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial 0
Sep 13 06:30:10 AlexSRVZ named[1793]: zone localhost.localdomain/IN: loaded serial 0
Sep 13 06:30:10 AlexSRVZ named[1793]: zone localhost/IN: loaded serial 0
Sep 13 06:30:10 AlexSRVZ named[1793]: zone titovlab.ru/IN: loaded serial 300
Sep 13 06:30:10 AlexSRVZ named[1793]: running
Sep 13 06:30:10 AlexSRVZ named[1793]: zone titovlab.ru/IN: sending notifies (serial 300)
Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.525:7): avc:  denied  { search } for  pid=1807 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.914:8): avc:  denied  { write } for  pid=1814 comm="dovecot" name="dovecot.log" dev=sda1 ino=2098666 scontext=system_u:system_r:dovecot_t:s0 tcontext=system_u:object_r:var_log_t:s0 tclass=file
Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.929:9): avc:  denied  { append } for  pid=1815 comm="dovecot" name="dovecot.log" dev=sda1 ino=2098666 scontext=system_u:system_r:dovecot_t:s0 tcontext=system_u:object_r:var_log_t:s0 tclass=file
Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.930:10): avc:  denied  { getattr } for  pid=1815 comm="dovecot" path="/var/log/dovecot/dovecot.log" dev=sda1 ino=2098666 scontext=system_u:system_r:dovecot_t:s0 tcontext=system_u:object_r:var_log_t:s0 tclass=file
Sep 13 06:30:11 AlexSRVZ kernel: type=1400 audit(1221273011.002:11): avc:  denied  { search } for  pid=1818 comm="dovecot-auth" name="/" dev=sda1 ino=2 scontext=system_u:system_r:dovecot_auth_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:30:11 AlexSRVZ kernel: type=1400 audit(1221273011.405:12): avc:  denied  { search } for  pid=1824 comm="postalias" name="/" dev=sda1 ino=2 scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:30:12 AlexSRVZ kernel: __ratelimit: 9 messages suppressed
Sep 13 06:30:12 AlexSRVZ kernel: type=1400 audit(1221273012.578:16): avc:  denied  { read write } for  pid=1875 comm="master" name="master.pid" dev=sda1 ino=2113634 scontext=system_u:system_r:postfix_master_t:s0 tcontext=unconfined_u:object_r:var_run_t:s0 tclass=file
Sep 13 06:30:12 AlexSRVZ kernel: warning: `proftpd' uses 32-bit capabilities (legacy support in use)
Sep 13 06:30:12 AlexSRVZ proftpd[1884]: AlexSRVZ - ProFTPD 1.3.1 (stable) (built Mon Dec 17 12:45:01 EST 2007) standalone mode STARTUP
Sep 13 06:30:12 AlexSRVZ /usr/sbin/gpm[1892]: *** info [startup.c(95)]:
Sep 13 06:30:12 AlexSRVZ /usr/sbin/gpm[1892]: Started gpm successfully. Entered daemon mode.
Sep 13 06:30:15 AlexSRVZ saslauthd[1928]: detach_tty      : master pid is: 1928
Sep 13 06:30:15 AlexSRVZ saslauthd[1928]: ipc_init        : listening on socket: /var/run/saslauthd/mux
Sep 13 06:30:19 AlexSRVZ kernel: __ratelimit: 39 messages suppressed
Sep 13 06:30:19 AlexSRVZ kernel: type=1400 audit(1221273019.157:30): avc:  denied  { search } for  pid=1940 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.180:32): avc:  denied  { getattr } for  pid=2036 comm="smbd" path="/mnt/Data/Soft" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.190:33): avc:  denied  { search } for  pid=2036 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.190:34): avc:  denied  { read } for  pid=2036 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.302:35): avc:  denied  { getattr } for  pid=2038 comm="smbd" path="/mnt/Data/Soft/TestFolder15/test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.409:36): avc:  denied  { read } for  pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.409:37): avc:  denied  { lock } for  pid=2038 comm="smbd" path="/mnt/Data/Soft/TestFolder15/test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:38): avc:  denied  { write } for  pid=2038 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:39): avc:  denied  { remove_name } for  pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=3383297 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:40): avc:  denied  { rmdir } for  pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=3383297 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.362:41): avc:  denied  { unlink } for  pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.438:42): avc:  denied  { add_name } for  pid=2038 comm="smbd" name="TestFolder15" scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.438:43): avc:  denied  { create } for  pid=2038 comm="smbd" name="TestFolder15" scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.475:44): avc:  denied  { setattr } for  pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=48463873 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir
Sep 13 06:37:15 AlexSRVZ kernel: b44: eth1: powering down PHY
Sep 13 06:37:15 AlexSRVZ kernel: b44: eth1: Link is down.
Sep 13 06:37:18 AlexSRVZ kernel: b44: eth1: Link is up at 100 Mbps, full duplex.
Sep 13 06:37:18 AlexSRVZ kernel: b44: eth1: Flow control is off for TX and off for RX.
Sep 13 06:37:25 AlexSRVZ kernel: b44: eth1: powering down PHY
Sep 13 06:37:26 AlexSRVZ kernel: b44: eth1: Link is down.
Sep 13 06:37:28 AlexSRVZ kernel: b44: eth1: Link is up at 100 Mbps, full duplex.
Sep 13 06:37:28 AlexSRVZ kernel: b44: eth1: Flow control is off for TX and off for RX.
Sep 13 06:37:30 AlexSRVZ kernel: b44: eth1: powering down PHY
Sep 13 06:37:30 AlexSRVZ kernel: b44: eth1: Link is down.
Sep 13 06:37:33 AlexSRVZ kernel: b44: eth1: Link is up at 100 Mbps, full duplex.
Sep 13 06:37:33 AlexSRVZ kernel: b44: eth1: Flow control is off for TX and off for RX.
Sep 13 06:37:43 AlexSRVZ kernel: __ratelimit: 6 messages suppressed
Sep 13 06:37:43 AlexSRVZ kernel: type=1400 audit(1221273463.721:47): avc:  denied  { setattr } for  pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=48463874 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 06:44:40 AlexSRVZ kernel: type=1400 audit(1221273880.622:48): avc:  denied  { search } for  pid=2069 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
Sep 13 06:44:42 AlexSRVZ kernel: type=1400 audit(1221273882.982:49): avc:  denied  { search } for  pid=1884 comm="proftpd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:ftpd_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir
[root@AlexSRVZ log]# ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
[root@AlexSRVZ log]# ethtool eth1
Settings for eth1:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Current message level: 0x000000ff (255)
        Link detected: yes

Исходное сообщение
"При нагрузке теряется физическое сетевое подключение" Отправлено ASTemo, 13-Сен-08 03:17
Спасибо за ответы. angra, извиняюсь за то, что не раскрыл полную картину. Все на так просто, я голову сломал над этой проблемой, ни один совет из Гугула не помогает, но похоже я далеко не единственный с такой проблемой. Итак, что есть: Сервер под управлением Fedora 9, ядро обновил до 2.6.26.3-29.fc9.i686. На нем стоит две сетевых карты - встроенный Broadcom b44 и D-link DGE-550T. По одной сервер соединен с одним коммутатором, по другой - с другим. К каждому коммутатору подключены разные рабочие станции под управлением Windows XP. Железо 100% рабочее, только что взял чистый винчестер и поставил на этот сервер Windows 2003 - все работает. Т.е. дело не в проводах и оборудовании. Проблемы: 1. при большой сетевой нагрузке (закачке на сервер файла размером 500МБ по smb или по ftp) через 5-10 СЕКУНД сетевая карта D-link DGE-550T (через нее идет закачка) отваливается, т.е. устройство есть, но ping не идет. Помогает ТОЛЬКО перезагрузка сервера. 2. То же, только в профиль. При закачке через Broadcom возрастает ping до этого интерфейса, возникают потери (около 40%). Как только перестаю закачивать - все ОК. Что пробовал и это не дало никакого результата: 1. вытащить одну из сетевок 2. отключить в BIOS встроенную сетевку 3. отключить в параметрах загрузки ядра ACPI (совет из гугла) 4. отключить в параметрах загрузки ядра APIC (совет из гугла) 5. поставил Windows 2003 и убедился, что железо рабочее. Логи: dmesg: Initializing cgroup subsys cpuset Linux version 2.6.26.3-29.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:42:27 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004ffec000 (usable) BIOS-e820: 000000004ffec000 - 000000004ffef000 (ACPI data) BIOS-e820: 000000004ffef000 - 000000004ffff000 (reserved) BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 383MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 327660) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 327660 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 327660 On node 0 totalpages: 327660 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 768 pages used for memmap HighMem zone: 97516 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000F5360, 0014 (r0 ASUS ) ACPI: RSDT 4FFEC000, 0030 (r1 ASUS P4PE 42302E31 MSFT 31313031) ACPI: FACP 4FFEC0C0, 0074 (r1 ASUS P4PE 42302E31 MSFT 31313031) ACPI: DSDT 4FFEC134, 2A43 (r1 ASUS P4PE 1000 MSFT 100000B) ACPI: FACS 4FFFF000, 0040 ACPI: BOOT 4FFEC030, 0028 (r1 ASUS P4PE 42302E31 MSFT 31313031) ACPI: APIC 4FFEC058, 005A (r1 ASUS P4PE 42302E31 MSFT 31313031) ACPI: PM-Timer IO Port: 0xe408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 SMP: Allowing 1 CPUs, 0 hotplug CPUs PERCPU: Allocating 40872 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325100 Kernel command line: ro root=UUID=62dd01b8-c8de-4719-9d93-07c8af051150 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07c6000 soft=c07a6000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2405.523 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1290940k/1310640k available (2257k kernel code, 18372k reserved, 1152k data, 284k init, 393136k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc075c000 - 0xc07a3000 ( 284 kB) .data : 0xc0634770 - 0xc0754980 (1152 kB) .text : 0xc0400000 - 0xc0634770 (2257 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 4814.59 BogoMIPS (lpj=2407299) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 20k freed ACPI: Core revision 20080321 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Brought up 1 CPUs Total of 1 processors activated (4814.59 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=3188 bytes CPU0 attaching sched-domain: domain 0: span 0 groups: 0 net_namespace: 660 bytes Booting paravirtualized kernel on bare hardware Time: 2:29:37 Date: 09/13/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf1e60, last bus=2 PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround pci 0000:00:1f.0: Enabled i801 SMBus device pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x4fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:02: ioport range 0xe400-0xe47f has been reserved system 00:02: ioport range 0xe800-0xe81f has been reserved system 00:02: ioport range 0xec00-0xec3f has been reserved system 00:02: ioport range 0x4d6-0x4d6 has been reserved system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved system 00:03: ioport range 0x4d0-0x4d1 has been reserved system 00:0e: ioport range 0x3f0-0x3f1 has been reserved PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: 0xef000000-0xefdfffff PREFETCH window: 0x00000000eff00000-0x00000000f7ffffff PCI: Bridge: 0000:00:1e.0 IO window: 9000-afff MEM window: 0xed000000-0xee7fffff PREFETCH window: 0x00000000efe00000-0x00000000efefffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2655k freed Simple Boot Flag at 0x3a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1221272976.448:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1760 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: Invalid PBLK length [5] ACPI: ACPI0007:00 is registered as cooling_device0 isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart: Detected an Intel 830M Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 8:130:460 Freeing unused kernel memory: 284k freed Write protecting the kernel text: 2260k Write protecting the kernel read-only data: 940k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee800000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata1.00: ATAPI: _NEC DVD_RW ND-4550A, 1.84, max UDMA/33 ata1.01: ATA-7: Maxtor 6Y080L0, YAR41VW0, max UDMA/133 ata1.01: 160086528 sectors, multi 16: LBA ata1.01: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 ata1.01: configured for UDMA/33 scsi 0:0:0:0: CD-ROM _NEC DVD_RW ND-4550A 1.84 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:1:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: 8192 avtab hash slots, 171554 rules. SELinux: 8192 avtab hash slots, 171554 rules. SELinux: 8 users, 12 roles, 2379 types, 117 bools, 1 sens, 1024 cats SELinux: 72 classes, 171554 rules SELinux: permission open in class dir not defined in policy SELinux: permission open in class file not defined in policy SELinux: permission open in class chr_file not defined in policy SELinux: permission open in class blk_file not defined in policy SELinux: permission open in class fifo_file not defined in policy SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: policy loaded with handle_unknown=allow type=1403 audit(1221272984.307:2): policy loaded auid=4294967295 ses=4294967295 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) intel_rng: FWH not detected scsi 0:0:0:0: Attached scsi generic sg0 type 5 sd 0:0:1:0: Attached scsi generic sg1 type 0 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 0000:02:0c.0: D-Link NIC Ethernet device registered as: eth0 ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 17 sata_sil 0000:02:0d.0: version 2.3 ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21 scsi2 : sata_sil scsi3 : sata_sil ata3: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed000080 irq 21 ata4: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed0000c0 irq 21 input: PC Speaker as /devices/platform/pcspkr/input/input4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: ATA-8: ST31000340AS, SD15, max UDMA/133 ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 784kHz parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133 ata4.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg2 type 0 scsi 3:0:0:0: Direct-Access ATA Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 3:0:0:0: [sdc] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg3 type 0 ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20 ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0 b44.c:v2.0 eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:6e:4c:0d:b1 ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.5 to 64 AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 50392 usecs intel8x0: clocking to 48000 ppdev: user-space parallel port driver device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com EXT3 FS on sda1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb1, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdc1, type ext3), uses xattr Adding 3100536k swap on /dev/sda2. Priority:-1 extents:1 across:3100536k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts messages: Sep 13 06:30:07 AlexSRVZ kernel: imklog 3.18.1, log source = /proc/kmsg started. Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys cpuset Sep 13 06:30:07 AlexSRVZ kernel: Linux version 2.6.26.3-29.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:42:27 EDT 2008 Sep 13 06:30:07 AlexSRVZ kernel: BIOS-provided physical RAM map: Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 0000000000100000 - 000000004ffec000 (usable) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffec000 - 000000004ffef000 (ACPI data) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffef000 - 000000004ffff000 (reserved) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 13 06:30:07 AlexSRVZ kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Sep 13 06:30:07 AlexSRVZ kernel: 383MB HIGHMEM available. Sep 13 06:30:07 AlexSRVZ kernel: 896MB LOWMEM available. Sep 13 06:30:07 AlexSRVZ kernel: Using x86 segment limits to approximate NX protection Sep 13 06:30:07 AlexSRVZ kernel: Zone PFN ranges: Sep 13 06:30:07 AlexSRVZ kernel: DMA 0 -> 4096 Sep 13 06:30:07 AlexSRVZ kernel: Normal 4096 -> 229376 Sep 13 06:30:07 AlexSRVZ kernel: HighMem 229376 -> 327660 Sep 13 06:30:07 AlexSRVZ kernel: Movable zone start PFN for each node Sep 13 06:30:07 AlexSRVZ kernel: early_node_map[1] active PFN ranges Sep 13 06:30:07 AlexSRVZ kernel: 0: 0 -> 327660 Sep 13 06:30:07 AlexSRVZ kernel: DMI 2.3 present. Sep 13 06:30:07 AlexSRVZ kernel: Using APIC driver default Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RSDP 000F5360, 0014 (r0 ASUS ) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RSDT 4FFEC000, 0030 (r1 ASUS P4PE 42302E31 MSFT 31313031) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: FACP 4FFEC0C0, 0074 (r1 ASUS P4PE 42302E31 MSFT 31313031) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: DSDT 4FFEC134, 2A43 (r1 ASUS P4PE 1000 MSFT 100000B) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: FACS 4FFFF000, 0040 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: BOOT 4FFEC030, 0028 (r1 ASUS P4PE 42302E31 MSFT 31313031) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: APIC 4FFEC058, 005A (r1 ASUS P4PE 42302E31 MSFT 31313031) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PM-Timer IO Port: 0xe408 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 13 06:30:07 AlexSRVZ kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) Sep 13 06:30:07 AlexSRVZ kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Sep 13 06:30:07 AlexSRVZ kernel: Using ACPI (MADT) for SMP configuration information Sep 13 06:30:07 AlexSRVZ kernel: Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000) Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Sep 13 06:30:07 AlexSRVZ kernel: SMP: Allowing 1 CPUs, 0 hotplug CPUs Sep 13 06:30:07 AlexSRVZ kernel: PERCPU: Allocating 40872 bytes of per cpu data Sep 13 06:30:07 AlexSRVZ kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325100 Sep 13 06:30:07 AlexSRVZ kernel: Kernel command line: ro root=UUID=62dd01b8-c8de-4719-9d93-07c8af051150 Sep 13 06:30:07 AlexSRVZ kernel: Enabling fast FPU save and restore... done. Sep 13 06:30:07 AlexSRVZ kernel: Enabling unmasked SIMD FPU exception support... done. Sep 13 06:30:07 AlexSRVZ kernel: Initializing CPU#0 Sep 13 06:30:07 AlexSRVZ kernel: CPU 0 irqstacks, hard=c07c6000 soft=c07a6000 Sep 13 06:30:07 AlexSRVZ kernel: PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 13 06:30:07 AlexSRVZ kernel: Detected 2405.523 MHz processor. Sep 13 06:30:07 AlexSRVZ kernel: Console: colour VGA+ 80x25 Sep 13 06:30:07 AlexSRVZ kernel: console [tty0] enabled Sep 13 06:30:07 AlexSRVZ kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 13 06:30:07 AlexSRVZ kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 13 06:30:07 AlexSRVZ kernel: Memory: 1290940k/1310640k available (2257k kernel code, 18372k reserved, 1152k data, 284k init, 393136k highmem) Sep 13 06:30:07 AlexSRVZ kernel: virtual kernel memory layout: Sep 13 06:30:07 AlexSRVZ kernel: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) Sep 13 06:30:07 AlexSRVZ kernel: pkmap : 0xff400000 - 0xff800000 (4096 kB) Sep 13 06:30:07 AlexSRVZ kernel: vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) Sep 13 06:30:07 AlexSRVZ kernel: lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) Sep 13 06:30:07 AlexSRVZ kernel: .init : 0xc075c000 - 0xc07a3000 ( 284 kB) Sep 13 06:30:07 AlexSRVZ kernel: .data : 0xc0634770 - 0xc0754980 (1152 kB) Sep 13 06:30:07 AlexSRVZ kernel: .text : 0xc0400000 - 0xc0634770 (2257 kB) Sep 13 06:30:07 AlexSRVZ kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok. Sep 13 06:30:07 AlexSRVZ kernel: SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Sep 13 06:30:07 AlexSRVZ kernel: Calibrating delay using timer specific routine.. 4814.59 BogoMIPS (lpj=2407299) Sep 13 06:30:07 AlexSRVZ kernel: Security Framework initialized Sep 13 06:30:07 AlexSRVZ kernel: SELinux: Initializing. Sep 13 06:30:07 AlexSRVZ kernel: selinux_register_security: Registering secondary module capability Sep 13 06:30:07 AlexSRVZ kernel: Capability LSM initialized as secondary Sep 13 06:30:07 AlexSRVZ kernel: Mount-cache hash table entries: 512 Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys ns Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys cpuacct Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys devices Sep 13 06:30:07 AlexSRVZ kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Sep 13 06:30:07 AlexSRVZ kernel: CPU: L2 cache: 512K Sep 13 06:30:07 AlexSRVZ kernel: CPU: Hyper-Threading is disabled Sep 13 06:30:07 AlexSRVZ kernel: Intel machine check architecture supported. Sep 13 06:30:07 AlexSRVZ kernel: Intel machine check reporting enabled on CPU#0. Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Thermal monitoring enabled Sep 13 06:30:07 AlexSRVZ kernel: Checking 'hlt' instruction... OK. Sep 13 06:30:07 AlexSRVZ kernel: SMP alternatives: switching to UP code Sep 13 06:30:07 AlexSRVZ kernel: Freeing SMP alternatives: 20k freed Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Core revision 20080321 Sep 13 06:30:07 AlexSRVZ kernel: ENABLING IO-APIC IRQs Sep 13 06:30:07 AlexSRVZ kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Sep 13 06:30:07 AlexSRVZ kernel: Brought up 1 CPUs Sep 13 06:30:07 AlexSRVZ kernel: Total of 1 processors activated (4814.59 BogoMIPS). Sep 13 06:30:07 AlexSRVZ kernel: net_namespace: 660 bytes Sep 13 06:30:07 AlexSRVZ kernel: Booting paravirtualized kernel on bare hardware Sep 13 06:30:07 AlexSRVZ kernel: Time: 2:29:37 Date: 09/13/08 Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 16 Sep 13 06:30:07 AlexSRVZ kernel: No dock devices found. Sep 13 06:30:07 AlexSRVZ kernel: ACPI: bus type pci registered Sep 13 06:30:07 AlexSRVZ kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1e60, last bus=2 Sep 13 06:30:07 AlexSRVZ kernel: PCI: Using configuration type 1 for base access Sep 13 06:30:07 AlexSRVZ kernel: Setting up standard PCI resources Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Interpreter enabled Sep 13 06:30:07 AlexSRVZ kernel: ACPI: (supports S0 S1 S4 S5) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Using IOAPIC for interrupt routing Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 13 06:30:07 AlexSRVZ kernel: * The chipset may have PM-Timer Bug. Due to workarounds for a bug, Sep 13 06:30:07 AlexSRVZ kernel: * this clock source is slow. If you are sure your timer does not have Sep 13 06:30:07 AlexSRVZ kernel: * this bug, please use "acpi_pm_good" to disable the workaround Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: Enabled i801 SMBus device Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO Sep 13 06:30:07 AlexSRVZ kernel: PCI: Transparent bridge - 0000:00:1e.0 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled. Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) Sep 13 06:30:07 AlexSRVZ kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Sep 13 06:30:07 AlexSRVZ kernel: pnp: PnP ACPI init Sep 13 06:30:07 AlexSRVZ kernel: ACPI: bus type pnp registered Sep 13 06:30:07 AlexSRVZ kernel: pnp: PnP ACPI: found 15 devices Sep 13 06:30:07 AlexSRVZ kernel: ACPI: ACPI bus type pnp unregistered Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver usbfs Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver hub Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new device driver usb Sep 13 06:30:07 AlexSRVZ kernel: PCI: Using ACPI for IRQ routing Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: Initializing Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: domain hash size = 128 Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: protocols = UNLABELED CIPSOv4 Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: unlabeled traffic allowed by default Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RTC can wake from S4 Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0x0-0x9ffff could not be reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xf0000-0xfffff could not be reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0x100000-0x4fffffff could not be reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xe400-0xe47f has been reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xe800-0xe81f has been reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xec00-0xec3f has been reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0x4d6-0x4d6 has been reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:03: ioport range 0x4d0-0x4d1 has been reserved Sep 13 06:30:07 AlexSRVZ kernel: system 00:0e: ioport range 0x3f0-0x3f1 has been reserved Sep 13 06:30:07 AlexSRVZ kernel: PCI: Bridge: 0000:00:01.0 Sep 13 06:30:07 AlexSRVZ kernel: IO window: d000-dfff Sep 13 06:30:07 AlexSRVZ kernel: MEM window: 0xef000000-0xefdfffff Sep 13 06:30:07 AlexSRVZ kernel: PREFETCH window: 0x00000000eff00000-0x00000000f7ffffff Sep 13 06:30:07 AlexSRVZ kernel: PCI: Bridge: 0000:00:1e.0 Sep 13 06:30:07 AlexSRVZ kernel: IO window: 9000-afff Sep 13 06:30:07 AlexSRVZ kernel: MEM window: 0xed000000-0xee7fffff Sep 13 06:30:07 AlexSRVZ kernel: PREFETCH window: 0x00000000efe00000-0x00000000efefffff Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 2 Sep 13 06:30:07 AlexSRVZ kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 13 06:30:07 AlexSRVZ kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Sep 13 06:30:07 AlexSRVZ kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Sep 13 06:30:07 AlexSRVZ kernel: TCP: Hash tables configured (established 131072 bind 65536) Sep 13 06:30:07 AlexSRVZ kernel: TCP reno registered Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 1 Sep 13 06:30:07 AlexSRVZ kernel: checking if image is initramfs... it is Sep 13 06:30:07 AlexSRVZ kernel: Freeing initrd memory: 2655k freed Sep 13 06:30:07 AlexSRVZ kernel: Simple Boot Flag at 0x3a set to 0x1 Sep 13 06:30:07 AlexSRVZ kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Sep 13 06:30:07 AlexSRVZ kernel: apm: overridden by ACPI. Sep 13 06:30:07 AlexSRVZ kernel: audit: initializing netlink socket (disabled) Sep 13 06:30:07 AlexSRVZ kernel: type=2000 audit(1221272976.448:1): initialized Sep 13 06:30:07 AlexSRVZ kernel: highmem bounce pool size: 64 pages Sep 13 06:30:07 AlexSRVZ kernel: Total HugeTLB memory allocated, 0 Sep 13 06:30:07 AlexSRVZ kernel: VFS: Disk quotas dquot_6.5.1 Sep 13 06:30:07 AlexSRVZ kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 13 06:30:07 AlexSRVZ kernel: msgmni has been set to 1760 Sep 13 06:30:07 AlexSRVZ kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Sep 13 06:30:07 AlexSRVZ kernel: io scheduler noop registered Sep 13 06:30:07 AlexSRVZ kernel: io scheduler anticipatory registered Sep 13 06:30:07 AlexSRVZ kernel: io scheduler deadline registered Sep 13 06:30:07 AlexSRVZ kernel: io scheduler cfq registered (default) Sep 13 06:30:07 AlexSRVZ kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 13 06:30:07 AlexSRVZ kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Power Button (FF) [PWRF] Sep 13 06:30:07 AlexSRVZ kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Power Button (CM) [PWRB] Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Invalid PBLK length [5] Sep 13 06:30:07 AlexSRVZ kernel: ACPI: ACPI0007:00 is registered as cooling_device0 Sep 13 06:30:07 AlexSRVZ kernel: isapnp: Scanning for PnP cards... Sep 13 06:30:07 AlexSRVZ kernel: isapnp: No Plug & Play device found Sep 13 06:30:07 AlexSRVZ kernel: Non-volatile memory driver v1.2 Sep 13 06:30:07 AlexSRVZ kernel: Linux agpgart interface v0.103 Sep 13 06:30:07 AlexSRVZ kernel: agpgart: Detected an Intel 830M Chipset. Sep 13 06:30:07 AlexSRVZ kernel: agpgart: AGP aperture is 64M @ 0xf8000000 Sep 13 06:30:07 AlexSRVZ kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Sep 13 06:30:07 AlexSRVZ kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 13 06:30:07 AlexSRVZ kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Sep 13 06:30:07 AlexSRVZ kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 13 06:30:07 AlexSRVZ kernel: 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Sep 13 06:30:07 AlexSRVZ kernel: brd: module loaded Sep 13 06:30:07 AlexSRVZ kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input2 Sep 13 06:30:07 AlexSRVZ kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Sep 13 06:30:07 AlexSRVZ kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Sep 13 06:30:07 AlexSRVZ kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 13 06:30:07 AlexSRVZ kernel: mice: PS/2 mouse device common for all mice Sep 13 06:30:07 AlexSRVZ kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 Sep 13 06:30:07 AlexSRVZ kernel: rtc0: alarms up to one month Sep 13 06:30:07 AlexSRVZ kernel: cpuidle: using governor ladder Sep 13 06:30:07 AlexSRVZ kernel: cpuidle: using governor menu Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver hiddev Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver usbhid Sep 13 06:30:07 AlexSRVZ kernel: usbhid: v2.6:USB HID core driver Sep 13 06:30:07 AlexSRVZ kernel: TCP cubic registered Sep 13 06:30:07 AlexSRVZ kernel: Initializing XFRM netlink socket Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 17 Sep 13 06:30:07 AlexSRVZ kernel: Using IPI No-Shortcut mode Sep 13 06:30:07 AlexSRVZ kernel: registered taskstats version 1 Sep 13 06:30:07 AlexSRVZ kernel: Magic number: 8:130:460 Sep 13 06:30:07 AlexSRVZ kernel: Freeing unused kernel memory: 284k freed Sep 13 06:30:07 AlexSRVZ kernel: Write protecting the kernel text: 2260k Sep 13 06:30:07 AlexSRVZ kernel: Write protecting the kernel read-only data: 940k Sep 13 06:30:07 AlexSRVZ kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: debug port 1 Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee800000 Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: configuration #1 chosen from 1 choice Sep 13 06:30:07 AlexSRVZ kernel: hub 1-0:1.0: USB hub found Sep 13 06:30:07 AlexSRVZ kernel: hub 1-0:1.0: 6 ports detected Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: Product: EHCI Host Controller Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ehci_hcd Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: SerialNumber: 0000:00:1d.7 Sep 13 06:30:07 AlexSRVZ kernel: USB Universal Host Controller Interface driver v3.0 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800 Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: configuration #1 chosen from 1 choice Sep 13 06:30:07 AlexSRVZ kernel: hub 2-0:1.0: USB hub found Sep 13 06:30:07 AlexSRVZ kernel: hub 2-0:1.0: 2 ports detected Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: Product: UHCI Host Controller Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: SerialNumber: 0000:00:1d.0 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19 Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: configuration #1 chosen from 1 choice Sep 13 06:30:07 AlexSRVZ kernel: hub 3-0:1.0: USB hub found Sep 13 06:30:07 AlexSRVZ kernel: hub 3-0:1.0: 2 ports detected Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: Product: UHCI Host Controller Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: SerialNumber: 0000:00:1d.1 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000 Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: configuration #1 chosen from 1 choice Sep 13 06:30:07 AlexSRVZ kernel: hub 4-0:1.0: USB hub found Sep 13 06:30:07 AlexSRVZ kernel: hub 4-0:1.0: 2 ports detected Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: Product: UHCI Host Controller Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: SerialNumber: 0000:00:1d.2 Sep 13 06:30:07 AlexSRVZ kernel: SCSI subsystem initialized Sep 13 06:30:07 AlexSRVZ kernel: Driver 'sd' needs updating - please use bus_type methods Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 Sep 13 06:30:07 AlexSRVZ kernel: scsi0 : ata_piix Sep 13 06:30:07 AlexSRVZ kernel: scsi1 : ata_piix Sep 13 06:30:07 AlexSRVZ kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 Sep 13 06:30:07 AlexSRVZ kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Sep 13 06:30:07 AlexSRVZ kernel: ata1.00: ATAPI: _NEC DVD_RW ND-4550A, 1.84, max UDMA/33 Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: ATA-7: Maxtor 6Y080L0, YAR41VW0, max UDMA/133 Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: 160086528 sectors, multi 16: LBA Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: limited to UDMA/33 due to 40-wire cable Sep 13 06:30:07 AlexSRVZ kernel: ata1.00: configured for UDMA/33 Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: configured for UDMA/33 Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:0:0: CD-ROM _NEC DVD_RW ND-4550A 1.84 PQ: 0 ANSI: 5 Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB) Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write Protect is off Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB) Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write Protect is off Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 13 06:30:07 AlexSRVZ kernel: sda: sda1 sda2 Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Attached SCSI disk Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting. Commit interval 5 seconds Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class dir not defined in policy Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class file not defined in policy Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class chr_file not defined in policy Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class blk_file not defined in policy Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class fifo_file not defined in policy Sep 13 06:30:07 AlexSRVZ kernel: SELinux: policy loaded with handle_unknown=allow Sep 13 06:30:07 AlexSRVZ kernel: type=1403 audit(1221272984.307:2): policy loaded auid=4294967295 ses=4294967295 Sep 13 06:30:07 AlexSRVZ kernel: iTCO_vendor_support: vendor-support=0 Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460) Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Sep 13 06:30:07 AlexSRVZ kernel: intel_rng: FWH not detected Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:0:0: Attached scsi generic sg0 type 5 Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0 Sep 13 06:30:07 AlexSRVZ kernel: Driver 'sr' needs updating - please use bus_type methods Sep 13 06:30:07 AlexSRVZ kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Sep 13 06:30:07 AlexSRVZ kernel: Uniform CD-ROM driver Revision: 3.20 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 Sep 13 06:30:07 AlexSRVZ kernel: 0000:02:0c.0: D-Link NIC Sep 13 06:30:07 AlexSRVZ kernel: Ethernet device registered as: eth0 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 17 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21 Sep 13 06:30:07 AlexSRVZ kernel: scsi2 : sata_sil Sep 13 06:30:07 AlexSRVZ kernel: scsi3 : sata_sil Sep 13 06:30:07 AlexSRVZ kernel: ata3: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed000080 irq 21 Sep 13 06:30:07 AlexSRVZ kernel: ata4: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed0000c0 irq 21 Sep 13 06:30:07 AlexSRVZ kernel: input: PC Speaker as /devices/platform/pcspkr/input/input4 Sep 13 06:30:07 AlexSRVZ kernel: Floppy drive(s): fd0 is 1.44M Sep 13 06:30:07 AlexSRVZ kernel: FDC 0 is a post-1991 82077 Sep 13 06:30:07 AlexSRVZ kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: ATA-8: ST31000340AS, SD15, max UDMA/133 Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: configured for UDMA/100 Sep 13 06:30:07 AlexSRVZ kernel: gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 784kHz Sep 13 06:30:07 AlexSRVZ kernel: parport_pc 00:09: reported by Plug and Play ACPI Sep 13 06:30:07 AlexSRVZ kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 13 06:30:07 AlexSRVZ kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133 Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32) Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: configured for UDMA/100 Sep 13 06:30:07 AlexSRVZ kernel: scsi 2:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write Protect is off Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write Protect is off Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 13 06:30:07 AlexSRVZ kernel: sdb: sdb1 Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Attached SCSI disk Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0 Sep 13 06:30:07 AlexSRVZ kernel: scsi 3:0:0:0: Direct-Access ATA Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5 Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB) Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write Protect is off Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB) Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write Protect is off Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 13 06:30:07 AlexSRVZ kernel: sdc: sdc1 Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Attached SCSI disk Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20 Sep 13 06:30:07 AlexSRVZ kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0 Sep 13 06:30:07 AlexSRVZ kernel: b44.c:v2.0 Sep 13 06:30:07 AlexSRVZ kernel: eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:6e:4c:0d:b1 Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 17 Sep 13 06:30:07 AlexSRVZ kernel: AC'97 0 analog subsections not ready Sep 13 06:30:07 AlexSRVZ kernel: intel8x0_measure_ac97_clock: measured 50392 usecs Sep 13 06:30:07 AlexSRVZ kernel: intel8x0: clocking to 48000 Sep 13 06:30:07 AlexSRVZ kernel: ppdev: user-space parallel port driver Sep 13 06:30:07 AlexSRVZ kernel: device-mapper: uevent: version 1.0.3 Sep 13 06:30:07 AlexSRVZ kernel: device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sda1, internal journal Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting. Commit interval 5 seconds Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sdb1, internal journal Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting. Commit interval 5 seconds Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sdc1, internal journal Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 13 06:30:07 AlexSRVZ kernel: Adding 3100536k swap on /dev/sda2. Priority:-1 extents:1 across:3100536k Sep 13 06:30:07 AlexSRVZ kernel: firmware: requesting intel-ucode/0f-02-07 Sep 13 06:30:07 AlexSRVZ kernel: IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> Sep 13 06:30:07 AlexSRVZ kernel: microcode: CPU0 updated from revision 0x33 to 0x37, date = 06042003 Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 10 Sep 13 06:30:07 AlexSRVZ kernel: lo: Disabled Privacy Extensions Sep 13 06:30:07 AlexSRVZ kernel: eth0: Link speed = 1000Mbps. Sep 13 06:30:07 AlexSRVZ kernel: eth0: setting full duplex, TX flow control, RX flow control. Sep 13 06:30:07 AlexSRVZ kernel: eth0: Link speed = 1000Mbps. Sep 13 06:30:07 AlexSRVZ kernel: eth0: setting full duplex, TX flow control, RX flow control. Sep 13 06:30:07 AlexSRVZ kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready Sep 13 06:30:07 AlexSRVZ kernel: b44: eth1: Link is up at 100 Mbps, full duplex. Sep 13 06:30:07 AlexSRVZ kernel: b44: eth1: Flow control is off for TX and off for RX. Sep 13 06:30:07 AlexSRVZ kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Sep 13 06:30:07 AlexSRVZ kernel: type=1400 audit(1221273007.376:3): avc: denied { search } for pid=1629 comm="rsyslogd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:30:07 AlexSRVZ rsyslogd: [origin software="rsyslogd" swVersion="3.18.1" x-pid="1630" x-info="http://www.rsyslog.com"] restart Sep 13 06:30:07 AlexSRVZ kernel: type=1400 audit(1221273007.603:4): avc: denied { search } for pid=1640 comm="irqbalance" name="/" dev=sda1 ino=2 scontext=system_u:system_r:irqbalance_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:30:07 AlexSRVZ kernel: warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. Sep 13 06:30:08 AlexSRVZ acpid: starting up Sep 13 06:30:08 AlexSRVZ kernel: type=1400 audit(1221273008.435:5): avc: denied { search } for pid=1665 comm="console-kit-dae" name="/" dev=sda1 ino=2 scontext=system_u:system_r:consolekit_t:s0-s0:c0.c1023 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:30:08 AlexSRVZ kernel: type=1400 audit(1221273008.754:6): avc: denied { search } for pid=1731 comm="hal-acl-tool" name="/" dev=sda1 ino=2 scontext=system_u:system_r:hald_acl_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:30:09 AlexSRVZ acpid: client connected from 1755[68:68] Sep 13 06:30:10 AlexSRVZ named[1793]: starting BIND 9.5.0-P2 -u named Sep 13 06:30:10 AlexSRVZ named[1793]: found 1 CPU, using 1 worker thread Sep 13 06:30:10 AlexSRVZ named[1793]: loading configuration from '/etc/named.conf' Sep 13 06:30:10 AlexSRVZ named[1793]: the working directory is not writable Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface lo, 127.0.0.1#53 Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface eth0, 192.168.0.10#53 Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface eth1, 10.10.47.11#53 Sep 13 06:30:10 AlexSRVZ named[1793]: default max-cache-size (33554432) applies Sep 13 06:30:10 AlexSRVZ named[1793]: default max-cache-size (33554432) applies: view _bind Sep 13 06:30:10 AlexSRVZ named[1793]: command channel listening on 127.0.0.1#953 Sep 13 06:30:10 AlexSRVZ named[1793]: command channel listening on ::1#953 Sep 13 06:30:10 AlexSRVZ named[1793]: zone 0.in-addr.arpa/IN: NS '0.in-addr.arpa' has no address records (A or AAAA) Sep 13 06:30:10 AlexSRVZ named[1793]: zone 0.in-addr.arpa/IN: loaded serial 0 Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.127.in-addr.arpa/IN: NS '1.0.0.127.in-addr.arpa' has no address records (A or AAAA) Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.127.in-addr.arpa/IN: loaded serial 0 Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: NS '1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa' has no address records (A or AAAA) Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial 0 Sep 13 06:30:10 AlexSRVZ named[1793]: zone localhost.localdomain/IN: loaded serial 0 Sep 13 06:30:10 AlexSRVZ named[1793]: zone localhost/IN: loaded serial 0 Sep 13 06:30:10 AlexSRVZ named[1793]: zone titovlab.ru/IN: loaded serial 300 Sep 13 06:30:10 AlexSRVZ named[1793]: running Sep 13 06:30:10 AlexSRVZ named[1793]: zone titovlab.ru/IN: sending notifies (serial 300) Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.525:7): avc: denied { search } for pid=1807 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.914:8): avc: denied { write } for pid=1814 comm="dovecot" name="dovecot.log" dev=sda1 ino=2098666 scontext=system_u:system_r:dovecot_t:s0 tcontext=system_u:object_r:var_log_t:s0 tclass=file Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.929:9): avc: denied { append } for pid=1815 comm="dovecot" name="dovecot.log" dev=sda1 ino=2098666 scontext=system_u:system_r:dovecot_t:s0 tcontext=system_u:object_r:var_log_t:s0 tclass=file Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.930:10): avc: denied { getattr } for pid=1815 comm="dovecot" path="/var/log/dovecot/dovecot.log" dev=sda1 ino=2098666 scontext=system_u:system_r:dovecot_t:s0 tcontext=system_u:object_r:var_log_t:s0 tclass=file Sep 13 06:30:11 AlexSRVZ kernel: type=1400 audit(1221273011.002:11): avc: denied { search } for pid=1818 comm="dovecot-auth" name="/" dev=sda1 ino=2 scontext=system_u:system_r:dovecot_auth_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:30:11 AlexSRVZ kernel: type=1400 audit(1221273011.405:12): avc: denied { search } for pid=1824 comm="postalias" name="/" dev=sda1 ino=2 scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:30:12 AlexSRVZ kernel: __ratelimit: 9 messages suppressed Sep 13 06:30:12 AlexSRVZ kernel: type=1400 audit(1221273012.578:16): avc: denied { read write } for pid=1875 comm="master" name="master.pid" dev=sda1 ino=2113634 scontext=system_u:system_r:postfix_master_t:s0 tcontext=unconfined_u:object_r:var_run_t:s0 tclass=file Sep 13 06:30:12 AlexSRVZ kernel: warning: `proftpd' uses 32-bit capabilities (legacy support in use) Sep 13 06:30:12 AlexSRVZ proftpd[1884]: AlexSRVZ - ProFTPD 1.3.1 (stable) (built Mon Dec 17 12:45:01 EST 2007) standalone mode STARTUP Sep 13 06:30:12 AlexSRVZ /usr/sbin/gpm[1892]: *** info [startup.c(95)]: Sep 13 06:30:12 AlexSRVZ /usr/sbin/gpm[1892]: Started gpm successfully. Entered daemon mode. Sep 13 06:30:15 AlexSRVZ saslauthd[1928]: detach_tty : master pid is: 1928 Sep 13 06:30:15 AlexSRVZ saslauthd[1928]: ipc_init : listening on socket: /var/run/saslauthd/mux Sep 13 06:30:19 AlexSRVZ kernel: __ratelimit: 39 messages suppressed Sep 13 06:30:19 AlexSRVZ kernel: type=1400 audit(1221273019.157:30): avc: denied { search } for pid=1940 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.180:32): avc: denied { getattr } for pid=2036 comm="smbd" path="/mnt/Data/Soft" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.190:33): avc: denied { search } for pid=2036 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.190:34): avc: denied { read } for pid=2036 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.302:35): avc: denied { getattr } for pid=2038 comm="smbd" path="/mnt/Data/Soft/TestFolder15/test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.409:36): avc: denied { read } for pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.409:37): avc: denied { lock } for pid=2038 comm="smbd" path="/mnt/Data/Soft/TestFolder15/test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:38): avc: denied { write } for pid=2038 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:39): avc: denied { remove_name } for pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=3383297 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:40): avc: denied { rmdir } for pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=3383297 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.362:41): avc: denied { unlink } for pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.438:42): avc: denied { add_name } for pid=2038 comm="smbd" name="TestFolder15" scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.438:43): avc: denied { create } for pid=2038 comm="smbd" name="TestFolder15" scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.475:44): avc: denied { setattr } for pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=48463873 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=dir Sep 13 06:37:15 AlexSRVZ kernel: b44: eth1: powering down PHY Sep 13 06:37:15 AlexSRVZ kernel: b44: eth1: Link is down. Sep 13 06:37:18 AlexSRVZ kernel: b44: eth1: Link is up at 100 Mbps, full duplex. Sep 13 06:37:18 AlexSRVZ kernel: b44: eth1: Flow control is off for TX and off for RX. Sep 13 06:37:25 AlexSRVZ kernel: b44: eth1: powering down PHY Sep 13 06:37:26 AlexSRVZ kernel: b44: eth1: Link is down. Sep 13 06:37:28 AlexSRVZ kernel: b44: eth1: Link is up at 100 Mbps, full duplex. Sep 13 06:37:28 AlexSRVZ kernel: b44: eth1: Flow control is off for TX and off for RX. Sep 13 06:37:30 AlexSRVZ kernel: b44: eth1: powering down PHY Sep 13 06:37:30 AlexSRVZ kernel: b44: eth1: Link is down. Sep 13 06:37:33 AlexSRVZ kernel: b44: eth1: Link is up at 100 Mbps, full duplex. Sep 13 06:37:33 AlexSRVZ kernel: b44: eth1: Flow control is off for TX and off for RX. Sep 13 06:37:43 AlexSRVZ kernel: __ratelimit: 6 messages suppressed Sep 13 06:37:43 AlexSRVZ kernel: type=1400 audit(1221273463.721:47): avc: denied { setattr } for pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=48463874 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file Sep 13 06:44:40 AlexSRVZ kernel: type=1400 audit(1221273880.622:48): avc: denied { search } for pid=2069 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:mnt_t:s0 tclass=dir Sep 13 06:44:42 AlexSRVZ kernel: type=1400 audit(1221273882.982:49): avc: denied { search } for pid=1884 comm="proftpd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:ftpd_t:s0 tcontext=system_u:object_r:mnt_t:s0 tclass=dir [root@AlexSRVZ log]# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on [root@AlexSRVZ log]# ethtool eth1 Settings for eth1: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Current message level: 0x000000ff (255) Link detected: yes

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> Спасибо за ответы. > angra, извиняюсь за то, что не раскрыл полную картину. > Все на так просто, я голову сломал над этой проблемой, ни один > совет из Гугула не помогает, но похоже я далеко не единственный > с такой проблемой. > Итак, что есть: > Сервер под управлением Fedora 9, ядро обновил до 2.6.26.3-29.fc9.i686. На нем стоит > две сетевых карты - встроенный Broadcom b44 и D-link DGE-550T. По > одной сервер соединен с одним коммутатором, по другой - с другим. > К каждому коммутатору подключены разные рабочие станции под управлением Windows XP. > Железо 100% рабочее, только что взял чистый винчестер и поставил на этот > сервер Windows 2003 - все работает. Т.е. дело не в проводах > и оборудовании. > Проблемы: > 1. при большой сетевой нагрузке (закачке на сервер файла размером 500МБ по > smb или по ftp) через 5-10 СЕКУНД сетевая карта D-link DGE-550T > (через нее идет закачка) отваливается, т.е. устройство есть, но ping не > идет. Помогает ТОЛЬКО перезагрузка сервера. > 2. То же, только в профиль. При закачке через Broadcom возрастает ping > до этого интерфейса, возникают потери (около 40%). Как только перестаю закачивать > - все ОК. > Что пробовал и это не дало никакого результата: > 1. вытащить одну из сетевок > 2. отключить в BIOS встроенную сетевку > 3. отключить в параметрах загрузки ядра ACPI (совет из гугла) > 4. отключить в параметрах загрузки ядра APIC (совет из гугла) > 5. поставил Windows 2003 и убедился, что железо рабочее. > Логи: > dmesg: > Initializing cgroup subsys cpuset > Linux version 2.6.26.3-29.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) > (GCC) ) #1 SMP Wed Sep 3 03:42:27 EDT 2008 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000004ffec000 (usable) > BIOS-e820: 000000004ffec000 - 000000004ffef000 (ACPI data) > BIOS-e820: 000000004ffef000 - 000000004ffff000 (reserved) > BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > 383MB HIGHMEM available. > 896MB LOWMEM available. > Using x86 segment limits to approximate NX protection > Entering add_active_range(0, 0, 327660) 0 entries of 256 used > Zone PFN ranges: > DMA > 0 -> 4096 > Normal 4096 -> > 229376 > HighMem 229376 -> 327660 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: > 0 -> 327660 > On node 0 totalpages: 327660 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 768 pages used for memmap > HighMem zone: 97516 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > DMI 2.3 present. > Using APIC driver default > ACPI: RSDP 000F5360, 0014 (r0 ASUS ) > ACPI: RSDT 4FFEC000, 0030 (r1 ASUS P4PE > 42302E31 MSFT 31313031) > ACPI: FACP 4FFEC0C0, 0074 (r1 ASUS P4PE > 42302E31 MSFT 31313031) > ACPI: DSDT 4FFEC134, 2A43 (r1 ASUS P4PE > 1000 MSFT 100000B) > ACPI: FACS 4FFFF000, 0040 > ACPI: BOOT 4FFEC030, 0028 (r1 ASUS P4PE > 42302E31 MSFT 31313031) > ACPI: APIC 4FFEC058, 005A (r1 ASUS P4PE > 42302E31 MSFT 31313031) > ACPI: PM-Timer IO Port: 0xe408 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000) > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > SMP: Allowing 1 CPUs, 0 hotplug CPUs > PERCPU: Allocating 40872 bytes of per cpu data > NR_CPUS: 32, nr_cpu_ids: 1 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 325100 > Kernel command line: ro root=UUID=62dd01b8-c8de-4719-9d93-07c8af051150 > mapped APIC to ffffb000 (fee00000) > mapped IOAPIC to ffffa000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c07c6000 soft=c07a6000 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 2405.523 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 1290940k/1310640k available (2257k kernel code, 18372k reserved, 1152k data, 284k > init, 393136k highmem) > virtual kernel memory layout: > fixmap : 0xffc53000 - 0xfffff000 > (3760 kB) > pkmap : 0xff400000 - 0xff800000 > (4096 kB) > vmalloc : 0xf8800000 - 0xff3fe000 ( > 107 MB) > lowmem : 0xc0000000 - 0xf8000000 > ( 896 MB) > .init : 0xc075c000 - 0xc07a3000 > ( 284 kB) > .data : 0xc0634770 - 0xc0754980 > (1152 kB) > .text : 0xc0400000 - 0xc0634770 > (2257 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > CPA: page pool initialized 1 of 1 pages preallocated > SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > Calibrating delay using timer specific routine.. 4814.59 BogoMIPS (lpj=2407299) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys devices > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: Hyper-Threading is disabled > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU0: Intel P4/Xeon Extended MCE MSRs (12) available > CPU0: Thermal monitoring enabled > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 20k freed > ACPI: Core revision 20080321 > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 > Brought up 1 CPUs > Total of 1 processors activated (4814.59 BogoMIPS). > sizeof(vma)=84 bytes > sizeof(page)=32 bytes > sizeof(inode)=340 bytes > sizeof(dentry)=132 bytes > sizeof(ext3inode)=492 bytes > sizeof(buffer_head)=56 bytes > sizeof(skbuff)=180 bytes > sizeof(task_struct)=3188 bytes > CPU0 attaching sched-domain: > domain 0: span 0 > groups: 0 > net_namespace: 660 bytes > Booting paravirtualized kernel on bare hardware > Time: 2:29:37 Date: 09/13/08 > NET: Registered protocol family 16 > No dock devices found. > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xf1e60, last bus=2 > PCI: Using configuration type 1 for base access > Setting up standard PCI resources > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > * The chipset may have PM-Timer Bug. Due to workarounds for a > bug, > * this clock source is slow. If you are sure your timer > does not have > * this bug, please use "acpi_pm_good" to disable the workaround > pci 0000:00:1f.0: Enabled i801 SMBus device > pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 > 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 > 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 > 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 > 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 > 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 > 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 > 10 11 12 14 15) 0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 > 10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 15 devices > ACPI: ACPI bus type pnp unregistered > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > ACPI: RTC can wake from S4 > system 00:00: iomem range 0x0-0x9ffff could not be reserved > system 00:00: iomem range 0xf0000-0xfffff could not be reserved > system 00:00: iomem range 0x100000-0x4fffffff could not be reserved > system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved > system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved > system 00:02: ioport range 0xe400-0xe47f has been reserved > system 00:02: ioport range 0xe800-0xe81f has been reserved > system 00:02: ioport range 0xec00-0xec3f has been reserved > system 00:02: ioport range 0x4d6-0x4d6 has been reserved > system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved > system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved > system 00:03: ioport range 0x4d0-0x4d1 has been reserved > system 00:0e: ioport range 0x3f0-0x3f1 has been reserved > PCI: Bridge: 0000:00:01.0 > IO window: d000-dfff > MEM window: 0xef000000-0xefdfffff > PREFETCH window: 0x00000000eff00000-0x00000000f7ffffff > PCI: Bridge: 0000:00:1e.0 > IO window: 9000-afff > MEM window: 0xed000000-0xee7fffff > PREFETCH window: 0x00000000efe00000-0x00000000efefffff > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > checking if image is initramfs... it is > Freeing initrd memory: 2655k freed > Simple Boot Flag at 0x3a set to 0x1 > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) > apm: overridden by ACPI. > audit: initializing netlink socket (disabled) > type=2000 audit(1221272976.448:1): initialized > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > msgmni has been set to 1760 > SELinux: Registering netfilter hooks > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:01:00.0: Boot video device > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > ACPI: Power Button (CM) [PWRB] > ACPI: Invalid PBLK length [5] > ACPI: ACPI0007:00 is registered as cooling_device0 > isapnp: Scanning for PnP cards... > Switched to high resolution mode on CPU 0 > isapnp: No Plug & Play device found > Non-volatile memory driver v1.2 > Linux agpgart interface v0.103 > agpgart: Detected an Intel 830M Chipset. > agpgart: AGP aperture is 64M @ 0xf8000000 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > brd: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/input2 > PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > PNP: PS/2 appears to have AUX port disabled, if this is incorrect > please boot with i8042.nopnp > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month > cpuidle: using governor ladder > cpuidle: using governor menu > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > Using IPI No-Shortcut mode > registered taskstats version 1 > Magic number: 8:130:460 > Freeing unused kernel memory: 284k freed > Write protecting the kernel text: 2260k > Write protecting the kernel read-only data: 940k > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 > ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee800000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 6 ports detected > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ehci_hcd > usb usb1: SerialNumber: 0000:00:1d.7 > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd > usb usb2: SerialNumber: 0000:00:1d.0 > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd > usb usb3: SerialNumber: 0000:00:1d.1 > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd > usb usb4: SerialNumber: 0000:00:1d.2 > SCSI subsystem initialized > Driver 'sd' needs updating - please use bus_type methods > libata version 3.00 loaded. > ata_piix 0000:00:1f.1: version 2.12 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1f.1 to 64 > scsi0 : ata_piix > scsi1 : ata_piix > ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 > ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 > ata1.00: ATAPI: _NEC DVD_RW ND-4550A, 1.84, max UDMA/33 > ata1.01: ATA-7: Maxtor 6Y080L0, YAR41VW0, max UDMA/133 > ata1.01: 160086528 sectors, multi 16: LBA > ata1.01: limited to UDMA/33 due to 40-wire cable > ata1.00: configured for UDMA/33 > ata1.01: configured for UDMA/33 > scsi 0:0:0:0: CD-ROM > _NEC DVD_RW ND-4550A 1.84 > PQ: 0 ANSI: 5 > scsi 0:0:1:0: Direct-Access ATA > Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 > sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB) > sd 0:0:1:0: [sda] Write Protect is off > sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors (81964 MB) > sd 0:0:1:0: [sda] Write Protect is off > sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sda: sda1 sda2 > sd 0:0:1:0: [sda] Attached SCSI disk > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: 8192 avtab hash slots, 171554 rules. > SELinux: 8192 avtab hash slots, 171554 rules. > SELinux: 8 users, 12 roles, 2379 types, 117 bools, 1 sens, > 1024 cats > SELinux: 72 classes, 171554 rules > SELinux: permission open in class dir not defined in policy > SELinux: permission open in class file not defined in policy > SELinux: permission open in class chr_file not defined in policy > SELinux: permission open in class blk_file not defined in policy > SELinux: permission open in class fifo_file not defined in policy > SELinux: Completing initialization. > SELinux: Setting up existing superblocks. > SELinux: initialized (dev sda1, type ext3), uses xattr > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > SELinux: policy loaded with handle_unknown=allow > type=1403 audit(1221272984.307:2): policy loaded auid=4294967295 ses=4294967295 > iTCO_vendor_support: vendor-support=0 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) > iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > intel_rng: FWH not detected > scsi 0:0:0:0: Attached scsi generic sg0 type 5 > sd 0:0:1:0: Attached scsi generic sg1 type 0 > Driver 'sr' needs updating - please use bus_type methods > sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 0:0:0:0: Attached scsi CD-ROM sr0 > ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 > 0000:02:0c.0: D-Link NIC > Ethernet device registered as: eth0 > ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 > sata_sil 0000:02:0d.0: version 2.3 > ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21 > scsi2 : sata_sil > scsi3 : sata_sil > ata3: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed000080 irq 21 > ata4: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed0000c0 irq 21 > input: PC Speaker as /devices/platform/pcspkr/input/input4 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) > ata3.00: ATA-8: ST31000340AS, SD15, max UDMA/133 > ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata3.00: configured for UDMA/100 > gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 784kHz > parport_pc 00:09: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] > ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) > ata4.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133 > ata4.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata4.00: configured for UDMA/100 > scsi 2:0:0:0: Direct-Access ATA > ST31000340AS SD15 PQ: 0 ANSI: 5 > sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) > sd 2:0:0:0: [sdb] Write Protect is off > sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) > sd 2:0:0:0: [sdb] Write Protect is off > sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sdb: sdb1 > sd 2:0:0:0: [sdb] Attached SCSI disk > sd 2:0:0:0: Attached scsi generic sg2 type 0 > scsi 3:0:0:0: Direct-Access ATA > Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5 > sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB) > sd 3:0:0:0: [sdc] Write Protect is off > sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB) > sd 3:0:0:0: [sdc] Write Protect is off > sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sdc: sdc1 > sd 3:0:0:0: [sdc] Attached SCSI disk > sd 3:0:0:0: Attached scsi generic sg3 type 0 > ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20 > ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0 > b44.c:v2.0 > eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:6e:4c:0d:b1 > ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > AC'97 0 analog subsections not ready > intel8x0_measure_ac97_clock: measured 50392 usecs > intel8x0: clocking to 48000 > ppdev: user-space parallel port driver > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com > EXT3 FS on sda1, internal journal > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > kjournald starting. Commit interval 5 seconds > EXT3 FS on sdb1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: initialized (dev sdb1, type ext3), uses xattr > kjournald starting. Commit interval 5 seconds > EXT3 FS on sdc1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: initialized (dev sdc1, type ext3), uses xattr > Adding 3100536k swap on /dev/sda2. Priority:-1 extents:1 across:3100536k > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > messages: > Sep 13 06:30:07 AlexSRVZ kernel: imklog 3.18.1, log source = /proc/kmsg started. > Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys cpuset > Sep 13 06:30:07 AlexSRVZ kernel: Linux version 2.6.26.3-29.fc9.i686 (mockbuild@) (gcc > version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed > Sep 3 03:42:27 EDT 2008 > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-provided physical RAM map: > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 0000000000100000 - 000000004ffec000 (usable) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffec000 - 000000004ffef000 (ACPI > data) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffef000 - 000000004ffff000 (reserved) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI > NVS) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > Sep 13 06:30:07 AlexSRVZ kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > Sep 13 06:30:07 AlexSRVZ kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, > new 0x7010600070106 > Sep 13 06:30:07 AlexSRVZ kernel: 383MB HIGHMEM available. > Sep 13 06:30:07 AlexSRVZ kernel: 896MB LOWMEM available. > Sep 13 06:30:07 AlexSRVZ kernel: Using x86 segment limits to approximate NX > protection > Sep 13 06:30:07 AlexSRVZ kernel: Zone PFN ranges: > Sep 13 06:30:07 AlexSRVZ kernel: DMA > 0 -> > 4096 > Sep 13 06:30:07 AlexSRVZ kernel: Normal > 4096 -> 229376 > Sep 13 06:30:07 AlexSRVZ kernel: HighMem 229376 -> > 327660 > Sep 13 06:30:07 AlexSRVZ kernel: Movable zone start PFN for each node > Sep 13 06:30:07 AlexSRVZ kernel: early_node_map[1] active PFN ranges > Sep 13 06:30:07 AlexSRVZ kernel: 0: > 0 -> 327660 > Sep 13 06:30:07 AlexSRVZ kernel: DMI 2.3 present. > Sep 13 06:30:07 AlexSRVZ kernel: Using APIC driver default > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RSDP 000F5360, 0014 (r0 ASUS > ) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RSDT 4FFEC000, 0030 (r1 ASUS > P4PE 42302E31 MSFT 31313031) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: FACP 4FFEC0C0, 0074 (r1 ASUS > P4PE 42302E31 MSFT 31313031) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: DSDT 4FFEC134, 2A43 (r1 > ASUS P4PE 1000 > MSFT 100000B) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: FACS 4FFFF000, 0040 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: BOOT 4FFEC030, 0028 (r1 ASUS > P4PE 42302E31 MSFT 31313031) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: APIC 4FFEC058, 005A (r1 ASUS > P4PE 42302E31 MSFT 31313031) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PM-Timer IO Port: 0xe408 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > Sep 13 06:30:07 AlexSRVZ kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, > GSI 0-23 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq > 2 dfl edge) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq > 22 low level) > Sep 13 06:30:07 AlexSRVZ kernel: Enabling APIC mode: Flat. Using > 1 I/O APICs > Sep 13 06:30:07 AlexSRVZ kernel: Using ACPI (MADT) for SMP configuration information > Sep 13 06:30:07 AlexSRVZ kernel: Allocating PCI resources starting at 60000000 (gap: > 50000000:aec00000) > Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > Sep 13 06:30:07 AlexSRVZ kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > Sep 13 06:30:07 AlexSRVZ kernel: SMP: Allowing 1 CPUs, 0 hotplug CPUs > Sep 13 06:30:07 AlexSRVZ kernel: PERCPU: Allocating 40872 bytes of per cpu > data > Sep 13 06:30:07 AlexSRVZ kernel: Built 1 zonelists in Zone order, mobility > grouping on. Total pages: 325100 > Sep 13 06:30:07 AlexSRVZ kernel: Kernel command line: ro root=UUID=62dd01b8-c8de-4719-9d93-07c8af051150 > Sep 13 06:30:07 AlexSRVZ kernel: Enabling fast FPU save and restore... done. > Sep 13 06:30:07 AlexSRVZ kernel: Enabling unmasked SIMD FPU exception support... done. > Sep 13 06:30:07 AlexSRVZ kernel: Initializing CPU#0 > Sep 13 06:30:07 AlexSRVZ kernel: CPU 0 irqstacks, hard=c07c6000 soft=c07a6000 > Sep 13 06:30:07 AlexSRVZ kernel: PID hash table entries: 4096 (order: 12, > 16384 bytes) > Sep 13 06:30:07 AlexSRVZ kernel: Detected 2405.523 MHz processor. > Sep 13 06:30:07 AlexSRVZ kernel: Console: colour VGA+ 80x25 > Sep 13 06:30:07 AlexSRVZ kernel: console [tty0] enabled > Sep 13 06:30:07 AlexSRVZ kernel: Dentry cache hash table entries: 131072 (order: > 7, 524288 bytes) > Sep 13 06:30:07 AlexSRVZ kernel: Inode-cache hash table entries: 65536 (order: 6, > 262144 bytes) > Sep 13 06:30:07 AlexSRVZ kernel: Memory: 1290940k/1310640k available (2257k kernel code, > 18372k reserved, 1152k data, 284k init, 393136k highmem) > Sep 13 06:30:07 AlexSRVZ kernel: virtual kernel memory layout: > Sep 13 06:30:07 AlexSRVZ kernel: fixmap : 0xffc53000 > - 0xfffff000 (3760 kB) > Sep 13 06:30:07 AlexSRVZ kernel: pkmap : > 0xff400000 - 0xff800000 (4096 kB) > Sep 13 06:30:07 AlexSRVZ kernel: vmalloc : 0xf8800000 - > 0xff3fe000 ( 107 MB) > Sep 13 06:30:07 AlexSRVZ kernel: lowmem : 0xc0000000 > - 0xf8000000 ( 896 MB) > Sep 13 06:30:07 AlexSRVZ kernel: .init : > 0xc075c000 - 0xc07a3000 ( 284 kB) > Sep 13 06:30:07 AlexSRVZ kernel: .data : > 0xc0634770 - 0xc0754980 (1152 kB) > Sep 13 06:30:07 AlexSRVZ kernel: .text : > 0xc0400000 - 0xc0634770 (2257 kB) > Sep 13 06:30:07 AlexSRVZ kernel: Checking if this processor honours the WP > bit even in supervisor mode...Ok. > Sep 13 06:30:07 AlexSRVZ kernel: SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, > CPUs=1, Nodes=1 > Sep 13 06:30:07 AlexSRVZ kernel: Calibrating delay using timer specific routine.. 4814.59 > BogoMIPS (lpj=2407299) > Sep 13 06:30:07 AlexSRVZ kernel: Security Framework initialized > Sep 13 06:30:07 AlexSRVZ kernel: SELinux: Initializing. > Sep 13 06:30:07 AlexSRVZ kernel: selinux_register_security: Registering secondary module > capability > Sep 13 06:30:07 AlexSRVZ kernel: Capability LSM initialized as secondary > Sep 13 06:30:07 AlexSRVZ kernel: Mount-cache hash table entries: 512 > Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys ns > Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys cpuacct > Sep 13 06:30:07 AlexSRVZ kernel: Initializing cgroup subsys devices > Sep 13 06:30:07 AlexSRVZ kernel: CPU: Trace cache: 12K uops, L1 D > cache: 8K > Sep 13 06:30:07 AlexSRVZ kernel: CPU: L2 cache: 512K > Sep 13 06:30:07 AlexSRVZ kernel: CPU: Hyper-Threading is disabled > Sep 13 06:30:07 AlexSRVZ kernel: Intel machine check architecture supported. > Sep 13 06:30:07 AlexSRVZ kernel: Intel machine check reporting enabled on CPU#0. > Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) > available > Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Thermal monitoring enabled > Sep 13 06:30:07 AlexSRVZ kernel: Checking 'hlt' instruction... OK. > Sep 13 06:30:07 AlexSRVZ kernel: SMP alternatives: switching to UP code > Sep 13 06:30:07 AlexSRVZ kernel: Freeing SMP alternatives: 20k freed > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Core revision 20080321 > Sep 13 06:30:07 AlexSRVZ kernel: ENABLING IO-APIC IRQs > Sep 13 06:30:07 AlexSRVZ kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > Sep 13 06:30:07 AlexSRVZ kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping > 07 > Sep 13 06:30:07 AlexSRVZ kernel: Brought up 1 CPUs > Sep 13 06:30:07 AlexSRVZ kernel: Total of 1 processors activated (4814.59 BogoMIPS). > Sep 13 06:30:07 AlexSRVZ kernel: net_namespace: 660 bytes > Sep 13 06:30:07 AlexSRVZ kernel: Booting paravirtualized kernel on bare hardware > Sep 13 06:30:07 AlexSRVZ kernel: Time: 2:29:37 Date: 09/13/08 > Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 16 > Sep 13 06:30:07 AlexSRVZ kernel: No dock devices found. > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: bus type pci registered > Sep 13 06:30:07 AlexSRVZ kernel: PCI: PCI BIOS revision 2.10 entry at > 0xf1e60, last bus=2 > Sep 13 06:30:07 AlexSRVZ kernel: PCI: Using configuration type 1 for base > access > Sep 13 06:30:07 AlexSRVZ kernel: Setting up standard PCI resources > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Interpreter enabled > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: (supports S0 S1 S4 S5) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Using IOAPIC for interrupt routing > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) > Sep 13 06:30:07 AlexSRVZ kernel: * The chipset may have PM-Timer Bug. > Due to workarounds for a bug, > Sep 13 06:30:07 AlexSRVZ kernel: * this clock source is slow. If > you are sure your timer does not have > Sep 13 06:30:07 AlexSRVZ kernel: * this bug, please use "acpi_pm_good" to > disable the workaround > Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: Enabled i801 SMBus device > Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: quirk: region e400-e47f claimed by > ICH4 ACPI/GPIO/TCO > Sep 13 06:30:07 AlexSRVZ kernel: pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by > ICH4 GPIO > Sep 13 06:30:07 AlexSRVZ kernel: PCI: Transparent bridge - 0000:00:1e.0 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 > 4 5 6 7 9 10 11 12 14 15) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 > 4 5 6 7 9 10 11 12 14 15) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 > 4 5 6 7 9 10 11 12 14 15) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 > 4 5 6 7 9 10 11 12 14 15) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 > 4 5 6 7 9 10 11 12 14 15) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 > 4 5 6 7 9 10 11 12 14 15) > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 > 4 5 6 7 9 10 11 12 14 15) 0, > disabled. > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 > 4 5 6 7 9 10 11 12 14 15) > Sep 13 06:30:07 AlexSRVZ kernel: Linux Plug and Play Support v0.97 (c) > Adam Belay > Sep 13 06:30:07 AlexSRVZ kernel: pnp: PnP ACPI init > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: bus type pnp registered > Sep 13 06:30:07 AlexSRVZ kernel: pnp: PnP ACPI: found 15 devices > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: ACPI bus type pnp unregistered > Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver usbfs > Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver hub > Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new device driver usb > Sep 13 06:30:07 AlexSRVZ kernel: PCI: Using ACPI for IRQ routing > Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: Initializing > Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: domain hash size = 128 > Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: protocols = UNLABELED CIPSOv4 > Sep 13 06:30:07 AlexSRVZ kernel: NetLabel: unlabeled traffic allowed by default > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: RTC can wake from S4 > Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0x0-0x9ffff could not > be reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xf0000-0xfffff could not > be reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0x100000-0x4fffffff could not > be reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xfec00000-0xfec000ff could > not be reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:00: iomem range 0xfee00000-0xfee00fff could > not be reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xe400-0xe47f has been > reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xe800-0xe81f has been > reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0xec00-0xec3f has been > reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: ioport range 0x4d6-0x4d6 has been > reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: iomem range 0xfff80000-0xffffffff could > not be reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:02: iomem range 0xffb80000-0xffbfffff has been > reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:03: ioport range 0x4d0-0x4d1 has been > reserved > Sep 13 06:30:07 AlexSRVZ kernel: system 00:0e: ioport range 0x3f0-0x3f1 has been > reserved > Sep 13 06:30:07 AlexSRVZ kernel: PCI: Bridge: 0000:00:01.0 > Sep 13 06:30:07 AlexSRVZ kernel: IO window: d000-dfff > Sep 13 06:30:07 AlexSRVZ kernel: MEM window: 0xef000000-0xefdfffff > Sep 13 06:30:07 AlexSRVZ kernel: PREFETCH window: 0x00000000eff00000-0x00000000f7ffffff > Sep 13 06:30:07 AlexSRVZ kernel: PCI: Bridge: 0000:00:1e.0 > Sep 13 06:30:07 AlexSRVZ kernel: IO window: 9000-afff > Sep 13 06:30:07 AlexSRVZ kernel: MEM window: 0xed000000-0xee7fffff > Sep 13 06:30:07 AlexSRVZ kernel: PREFETCH window: 0x00000000efe00000-0x00000000efefffff > Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 2 > Sep 13 06:30:07 AlexSRVZ kernel: IP route cache hash table entries: 32768 > (order: 5, 131072 bytes) > Sep 13 06:30:07 AlexSRVZ kernel: TCP established hash table entries: 131072 (order: > 8, 1048576 bytes) > Sep 13 06:30:07 AlexSRVZ kernel: TCP bind hash table entries: 65536 (order: > 7, 524288 bytes) > Sep 13 06:30:07 AlexSRVZ kernel: TCP: Hash tables configured (established 131072 bind > 65536) > Sep 13 06:30:07 AlexSRVZ kernel: TCP reno registered > Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 1 > Sep 13 06:30:07 AlexSRVZ kernel: checking if image is initramfs... it is > Sep 13 06:30:07 AlexSRVZ kernel: Freeing initrd memory: 2655k freed > Sep 13 06:30:07 AlexSRVZ kernel: Simple Boot Flag at 0x3a set to > 0x1 > Sep 13 06:30:07 AlexSRVZ kernel: apm: BIOS version 1.2 Flags 0x03 (Driver > version 1.16ac) > Sep 13 06:30:07 AlexSRVZ kernel: apm: overridden by ACPI. > Sep 13 06:30:07 AlexSRVZ kernel: audit: initializing netlink socket (disabled) > Sep 13 06:30:07 AlexSRVZ kernel: type=2000 audit(1221272976.448:1): initialized > Sep 13 06:30:07 AlexSRVZ kernel: highmem bounce pool size: 64 pages > Sep 13 06:30:07 AlexSRVZ kernel: Total HugeTLB memory allocated, 0 > Sep 13 06:30:07 AlexSRVZ kernel: VFS: Disk quotas dquot_6.5.1 > Sep 13 06:30:07 AlexSRVZ kernel: Dquot-cache hash table entries: 1024 (order 0, > 4096 bytes) > Sep 13 06:30:07 AlexSRVZ kernel: msgmni has been set to 1760 > Sep 13 06:30:07 AlexSRVZ kernel: Block layer SCSI generic (bsg) driver version > 0.4 loaded (major 252) > Sep 13 06:30:07 AlexSRVZ kernel: io scheduler noop registered > Sep 13 06:30:07 AlexSRVZ kernel: io scheduler anticipatory registered > Sep 13 06:30:07 AlexSRVZ kernel: io scheduler deadline registered > Sep 13 06:30:07 AlexSRVZ kernel: io scheduler cfq registered (default) > Sep 13 06:30:07 AlexSRVZ kernel: pci_hotplug: PCI Hot Plug PCI Core version: > 0.5 > Sep 13 06:30:07 AlexSRVZ kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Power Button (FF) [PWRF] > Sep 13 06:30:07 AlexSRVZ kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Power Button (CM) [PWRB] > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: Invalid PBLK length [5] > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: ACPI0007:00 is registered as cooling_device0 > Sep 13 06:30:07 AlexSRVZ kernel: isapnp: Scanning for PnP cards... > Sep 13 06:30:07 AlexSRVZ kernel: isapnp: No Plug & Play device found > Sep 13 06:30:07 AlexSRVZ kernel: Non-volatile memory driver v1.2 > Sep 13 06:30:07 AlexSRVZ kernel: Linux agpgart interface v0.103 > Sep 13 06:30:07 AlexSRVZ kernel: agpgart: Detected an Intel 830M Chipset. > Sep 13 06:30:07 AlexSRVZ kernel: agpgart: AGP aperture is 64M @ 0xf8000000 > Sep 13 06:30:07 AlexSRVZ kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 > ports, IRQ sharing enabled > Sep 13 06:30:07 AlexSRVZ kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = > 4) is a 16550A > Sep 13 06:30:07 AlexSRVZ kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = > 3) is a 16550A > Sep 13 06:30:07 AlexSRVZ kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = > 4) is a 16550A > Sep 13 06:30:07 AlexSRVZ kernel: 00:0b: ttyS1 at I/O 0x2f8 (irq = > 3) is a 16550A > Sep 13 06:30:07 AlexSRVZ kernel: brd: module loaded > Sep 13 06:30:07 AlexSRVZ kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input2 > Sep 13 06:30:07 AlexSRVZ kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq > 1 > Sep 13 06:30:07 AlexSRVZ kernel: PNP: PS/2 appears to have AUX port > disabled, if this is incorrect please boot with i8042.nopnp > Sep 13 06:30:07 AlexSRVZ kernel: serio: i8042 KBD port at 0x60,0x64 irq > 1 > Sep 13 06:30:07 AlexSRVZ kernel: mice: PS/2 mouse device common for all > mice > Sep 13 06:30:07 AlexSRVZ kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as > rtc0 > Sep 13 06:30:07 AlexSRVZ kernel: rtc0: alarms up to one month > Sep 13 06:30:07 AlexSRVZ kernel: cpuidle: using governor ladder > Sep 13 06:30:07 AlexSRVZ kernel: cpuidle: using governor menu > Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver hiddev > Sep 13 06:30:07 AlexSRVZ kernel: usbcore: registered new interface driver usbhid > Sep 13 06:30:07 AlexSRVZ kernel: usbhid: v2.6:USB HID core driver > Sep 13 06:30:07 AlexSRVZ kernel: TCP cubic registered > Sep 13 06:30:07 AlexSRVZ kernel: Initializing XFRM netlink socket > Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 17 > Sep 13 06:30:07 AlexSRVZ kernel: Using IPI No-Shortcut mode > Sep 13 06:30:07 AlexSRVZ kernel: registered taskstats version 1 > Sep 13 06:30:07 AlexSRVZ kernel: Magic number: 8:130:460 > Sep 13 06:30:07 AlexSRVZ kernel: Freeing unused kernel memory: 284k freed > Sep 13 06:30:07 AlexSRVZ kernel: Write protecting the kernel text: 2260k > Sep 13 06:30:07 AlexSRVZ kernel: Write protecting the kernel read-only data: 940k > Sep 13 06:30:07 AlexSRVZ kernel: input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input3 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 > (level, low) -> IRQ 23 > Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller > Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > bus number 1 > Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: debug port 1 > Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee800000 > Sep 13 06:30:07 AlexSRVZ kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, > driver 10 Dec 2004 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: configuration #1 chosen from 1 > choice > Sep 13 06:30:07 AlexSRVZ kernel: hub 1-0:1.0: USB hub found > Sep 13 06:30:07 AlexSRVZ kernel: hub 1-0:1.0: 6 ports detected > Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: New USB device strings: Mfr=3, > Product=2, SerialNumber=1 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: Product: EHCI Host Controller > Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ehci_hcd > Sep 13 06:30:07 AlexSRVZ kernel: usb usb1: SerialNumber: 0000:00:1d.7 > Sep 13 06:30:07 AlexSRVZ kernel: USB Universal Host Controller Interface driver v3.0 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 > (level, low) -> IRQ 16 > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > bus number 2 > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: configuration #1 chosen from 1 > choice > Sep 13 06:30:07 AlexSRVZ kernel: hub 2-0:1.0: USB hub found > Sep 13 06:30:07 AlexSRVZ kernel: hub 2-0:1.0: 2 ports detected > Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: New USB device found, idVendor=1d6b, > idProduct=0001 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: New USB device strings: Mfr=3, > Product=2, SerialNumber=1 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: Product: UHCI Host Controller > Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd > Sep 13 06:30:07 AlexSRVZ kernel: usb usb2: SerialNumber: 0000:00:1d.0 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 > (level, low) -> IRQ 19 > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > bus number 3 > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: configuration #1 chosen from 1 > choice > Sep 13 06:30:07 AlexSRVZ kernel: hub 3-0:1.0: USB hub found > Sep 13 06:30:07 AlexSRVZ kernel: hub 3-0:1.0: 2 ports detected > Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: New USB device found, idVendor=1d6b, > idProduct=0001 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: New USB device strings: Mfr=3, > Product=2, SerialNumber=1 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: Product: UHCI Host Controller > Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd > Sep 13 06:30:07 AlexSRVZ kernel: usb usb3: SerialNumber: 0000:00:1d.1 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 > (level, low) -> IRQ 18 > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > bus number 4 > Sep 13 06:30:07 AlexSRVZ kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: configuration #1 chosen from 1 > choice > Sep 13 06:30:07 AlexSRVZ kernel: hub 4-0:1.0: USB hub found > Sep 13 06:30:07 AlexSRVZ kernel: hub 4-0:1.0: 2 ports detected > Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: New USB device found, idVendor=1d6b, > idProduct=0001 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: New USB device strings: Mfr=3, > Product=2, SerialNumber=1 > Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: Product: UHCI Host Controller > Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: Manufacturer: Linux 2.6.26.3-29.fc9.i686 uhci_hcd > Sep 13 06:30:07 AlexSRVZ kernel: usb usb4: SerialNumber: 0000:00:1d.2 > Sep 13 06:30:07 AlexSRVZ kernel: SCSI subsystem initialized > Sep 13 06:30:07 AlexSRVZ kernel: Driver 'sd' needs updating - please use > bus_type methods > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 > (level, low) -> IRQ 18 > Sep 13 06:30:07 AlexSRVZ kernel: scsi0 : ata_piix > Sep 13 06:30:07 AlexSRVZ kernel: scsi1 : ata_piix > Sep 13 06:30:07 AlexSRVZ kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl > 0x3f6 bmdma 0xf000 irq 14 > Sep 13 06:30:07 AlexSRVZ kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl > 0x376 bmdma 0xf008 irq 15 > Sep 13 06:30:07 AlexSRVZ kernel: ata1.00: ATAPI: _NEC DVD_RW ND-4550A, 1.84, max > UDMA/33 > Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: ATA-7: Maxtor 6Y080L0, YAR41VW0, max UDMA/133 > Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: 160086528 sectors, multi 16: LBA > Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: limited to UDMA/33 due to 40-wire > cable > Sep 13 06:30:07 AlexSRVZ kernel: ata1.00: configured for UDMA/33 > Sep 13 06:30:07 AlexSRVZ kernel: ata1.01: configured for UDMA/33 > Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:0:0: CD-ROM > _NEC > DVD_RW ND-4550A 1.84 PQ: 0 ANSI: 5 > Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:1:0: Direct-Access > ATA Maxtor 6Y080L0 YAR4 > PQ: 0 ANSI: 5 > Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors > (81964 MB) > Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write Protect is off > Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] 160086528 512-byte hardware sectors > (81964 MB) > Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write Protect is off > Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Sep 13 06:30:07 AlexSRVZ kernel: sda: sda1 sda2 > Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: [sda] Attached SCSI disk > Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting. Commit interval 5 seconds > Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode. > Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class dir > not defined in policy > Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class file > not defined in policy > Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class chr_file > not defined in policy > Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class blk_file > not defined in policy > Sep 13 06:30:07 AlexSRVZ kernel: SELinux: permission open in class fifo_file > not defined in policy > Sep 13 06:30:07 AlexSRVZ kernel: SELinux: policy loaded with handle_unknown=allow > Sep 13 06:30:07 AlexSRVZ kernel: type=1403 audit(1221272984.307:2): policy loaded auid=4294967295 > ses=4294967295 > Sep 13 06:30:07 AlexSRVZ kernel: iTCO_vendor_support: vendor-support=0 > Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 > (30-Apr-2008) > Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: Found a ICH4 TCO device (Version=1, > TCOBASE=0xe460) > Sep 13 06:30:07 AlexSRVZ kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > Sep 13 06:30:07 AlexSRVZ kernel: intel_rng: FWH not detected > Sep 13 06:30:07 AlexSRVZ kernel: scsi 0:0:0:0: Attached scsi generic sg0 type > 5 > Sep 13 06:30:07 AlexSRVZ kernel: sd 0:0:1:0: Attached scsi generic sg1 type > 0 > Sep 13 06:30:07 AlexSRVZ kernel: Driver 'sr' needs updating - please use > bus_type methods > Sep 13 06:30:07 AlexSRVZ kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw > xa/form2 cdda tray > Sep 13 06:30:07 AlexSRVZ kernel: Uniform CD-ROM driver Revision: 3.20 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 > (level, low) -> IRQ 20 > Sep 13 06:30:07 AlexSRVZ kernel: 0000:02:0c.0: D-Link NIC > Sep 13 06:30:07 AlexSRVZ kernel: Ethernet device registered as: eth0 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 > (level, low) -> IRQ 17 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 > (level, low) -> IRQ 21 > Sep 13 06:30:07 AlexSRVZ kernel: scsi2 : sata_sil > Sep 13 06:30:07 AlexSRVZ kernel: scsi3 : sata_sil > Sep 13 06:30:07 AlexSRVZ kernel: ata3: SATA max UDMA/100 mmio m512@0xed000000 tf > 0xed000080 irq 21 > Sep 13 06:30:07 AlexSRVZ kernel: ata4: SATA max UDMA/100 mmio m512@0xed000000 tf > 0xed0000c0 irq 21 > Sep 13 06:30:07 AlexSRVZ kernel: input: PC Speaker as /devices/platform/pcspkr/input/input4 > Sep 13 06:30:07 AlexSRVZ kernel: Floppy drive(s): fd0 is 1.44M > Sep 13 06:30:07 AlexSRVZ kernel: FDC 0 is a post-1991 82077 > Sep 13 06:30:07 AlexSRVZ kernel: ata3: SATA link up 1.5 Gbps (SStatus > 113 SControl 310) > Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: ATA-8: ST31000340AS, SD15, max UDMA/133 > Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ > (depth 0/32) > Sep 13 06:30:07 AlexSRVZ kernel: ata3.00: configured for UDMA/100 > Sep 13 06:30:07 AlexSRVZ kernel: gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io > 0x200, speed 784kHz > Sep 13 06:30:07 AlexSRVZ kernel: parport_pc 00:09: reported by Plug and Play > ACPI > Sep 13 06:30:07 AlexSRVZ kernel: parport0: PC-style at 0x378 (0x778), irq 7 > [PCSPP,TRISTATE] > Sep 13 06:30:07 AlexSRVZ kernel: ata4: SATA link up 1.5 Gbps (SStatus > 113 SControl 310) > Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133 > Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: 398297088 sectors, multi 16: LBA48 NCQ > (depth 0/32) > Sep 13 06:30:07 AlexSRVZ kernel: ata4.00: configured for UDMA/100 > Sep 13 06:30:07 AlexSRVZ kernel: scsi 2:0:0:0: Direct-Access > ATA ST31000340AS > SD15 PQ: 0 ANSI: 5 > Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors > (1000205 MB) > Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write Protect is off > Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors > (1000205 MB) > Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write Protect is off > Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Sep 13 06:30:07 AlexSRVZ kernel: sdb: sdb1 > Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: [sdb] Attached SCSI disk > Sep 13 06:30:07 AlexSRVZ kernel: sd 2:0:0:0: Attached scsi generic sg2 type > 0 > Sep 13 06:30:07 AlexSRVZ kernel: scsi 3:0:0:0: Direct-Access > ATA Maxtor 6V200E0 VA11 > PQ: 0 ANSI: 5 > Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors > (203928 MB) > Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write Protect is off > Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] 398297088 512-byte hardware sectors > (203928 MB) > Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write Protect is off > Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Sep 13 06:30:07 AlexSRVZ kernel: sdc: sdc1 > Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: [sdc] Attached SCSI disk > Sep 13 06:30:07 AlexSRVZ kernel: sd 3:0:0:0: Attached scsi generic sg3 type > 0 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 > (level, low) -> IRQ 20 > Sep 13 06:30:07 AlexSRVZ kernel: ssb: Sonics Silicon Backplane found on PCI > device 0000:02:05.0 > Sep 13 06:30:07 AlexSRVZ kernel: b44.c:v2.0 > Sep 13 06:30:07 AlexSRVZ kernel: eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:6e:4c:0d:b1 > Sep 13 06:30:07 AlexSRVZ kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 > (level, low) -> IRQ 17 > Sep 13 06:30:07 AlexSRVZ kernel: AC'97 0 analog subsections not ready > Sep 13 06:30:07 AlexSRVZ kernel: intel8x0_measure_ac97_clock: measured 50392 usecs > Sep 13 06:30:07 AlexSRVZ kernel: intel8x0: clocking to 48000 > Sep 13 06:30:07 AlexSRVZ kernel: ppdev: user-space parallel port driver > Sep 13 06:30:07 AlexSRVZ kernel: device-mapper: uevent: version 1.0.3 > Sep 13 06:30:07 AlexSRVZ kernel: device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: > dm-devel@redhat.com > Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sda1, internal journal > Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting. Commit interval 5 seconds > Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sdb1, internal journal > Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode. > Sep 13 06:30:07 AlexSRVZ kernel: kjournald starting. Commit interval 5 seconds > Sep 13 06:30:07 AlexSRVZ kernel: EXT3 FS on sdc1, internal journal > Sep 13 06:30:07 AlexSRVZ kernel: EXT3-fs: mounted filesystem with ordered data mode. > Sep 13 06:30:07 AlexSRVZ kernel: Adding 3100536k swap on /dev/sda2. Priority:-1 > extents:1 across:3100536k > Sep 13 06:30:07 AlexSRVZ kernel: firmware: requesting intel-ucode/0f-02-07 > Sep 13 06:30:07 AlexSRVZ kernel: IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> > Sep 13 06:30:07 AlexSRVZ kernel: microcode: CPU0 updated from revision 0x33 to > 0x37, date = 06042003 > Sep 13 06:30:07 AlexSRVZ kernel: NET: Registered protocol family 10 > Sep 13 06:30:07 AlexSRVZ kernel: lo: Disabled Privacy Extensions > Sep 13 06:30:07 AlexSRVZ kernel: eth0: Link speed = 1000Mbps. > Sep 13 06:30:07 AlexSRVZ kernel: eth0: setting full duplex, TX flow control, > RX flow control. > Sep 13 06:30:07 AlexSRVZ kernel: eth0: Link speed = 1000Mbps. > Sep 13 06:30:07 AlexSRVZ kernel: eth0: setting full duplex, TX flow control, > RX flow control. > Sep 13 06:30:07 AlexSRVZ kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready > Sep 13 06:30:07 AlexSRVZ kernel: b44: eth1: Link is up at 100 > Mbps, full duplex. > Sep 13 06:30:07 AlexSRVZ kernel: b44: eth1: Flow control is off for > TX and off for RX. > Sep 13 06:30:07 AlexSRVZ kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > Sep 13 06:30:07 AlexSRVZ kernel: type=1400 audit(1221273007.376:3): avc: denied { > search } for pid=1629 comm="rsyslogd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:syslogd_t:s0 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:30:07 AlexSRVZ rsyslogd: [origin software="rsyslogd" swVersion="3.18.1" x-pid="1630" > x-info="http://www.rsyslog.com"] restart > Sep 13 06:30:07 AlexSRVZ kernel: type=1400 audit(1221273007.603:4): avc: denied { > search } for pid=1640 comm="irqbalance" name="/" dev=sda1 ino=2 scontext=system_u:system_r:irqbalance_t:s0 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:30:07 AlexSRVZ kernel: warning: `dbus-daemon' uses deprecated v2 capabilities > in a way that may be insecure. > Sep 13 06:30:08 AlexSRVZ acpid: starting up > Sep 13 06:30:08 AlexSRVZ kernel: type=1400 audit(1221273008.435:5): avc: denied { > search } for pid=1665 comm="console-kit-dae" name="/" dev=sda1 ino=2 scontext=system_u:system_r:consolekit_t:s0-s0:c0.c1023 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:30:08 AlexSRVZ kernel: type=1400 audit(1221273008.754:6): avc: denied { > search } for pid=1731 comm="hal-acl-tool" name="/" dev=sda1 ino=2 scontext=system_u:system_r:hald_acl_t:s0 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:30:09 AlexSRVZ acpid: client connected from 1755[68:68] > Sep 13 06:30:10 AlexSRVZ named[1793]: starting BIND 9.5.0-P2 -u named > Sep 13 06:30:10 AlexSRVZ named[1793]: found 1 CPU, using 1 worker thread > Sep 13 06:30:10 AlexSRVZ named[1793]: loading configuration from '/etc/named.conf' > Sep 13 06:30:10 AlexSRVZ named[1793]: the working directory is not writable > Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface lo, 127.0.0.1#53 > Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface eth0, 192.168.0.10#53 > Sep 13 06:30:10 AlexSRVZ named[1793]: listening on IPv4 interface eth1, 10.10.47.11#53 > Sep 13 06:30:10 AlexSRVZ named[1793]: default max-cache-size (33554432) applies > Sep 13 06:30:10 AlexSRVZ named[1793]: default max-cache-size (33554432) applies: view > _bind > Sep 13 06:30:10 AlexSRVZ named[1793]: command channel listening on 127.0.0.1#953 > Sep 13 06:30:10 AlexSRVZ named[1793]: command channel listening on ::1#953 > Sep 13 06:30:10 AlexSRVZ named[1793]: zone 0.in-addr.arpa/IN: NS '0.in-addr.arpa' has > no address records (A or AAAA) > Sep 13 06:30:10 AlexSRVZ named[1793]: zone 0.in-addr.arpa/IN: loaded serial 0 > Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.127.in-addr.arpa/IN: NS '1.0.0.127.in-addr.arpa' > has no address records (A or AAAA) > Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.127.in-addr.arpa/IN: loaded serial 0 > Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: > NS '1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa' > has no address records (A or AAAA) > Sep 13 06:30:10 AlexSRVZ named[1793]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: > loaded serial 0 > Sep 13 06:30:10 AlexSRVZ named[1793]: zone localhost.localdomain/IN: loaded serial 0 > Sep 13 06:30:10 AlexSRVZ named[1793]: zone localhost/IN: loaded serial 0 > Sep 13 06:30:10 AlexSRVZ named[1793]: zone titovlab.ru/IN: loaded serial 300 > Sep 13 06:30:10 AlexSRVZ named[1793]: running > Sep 13 06:30:10 AlexSRVZ named[1793]: zone titovlab.ru/IN: sending notifies (serial 300) > Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.525:7): avc: denied { > search } for pid=1807 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.914:8): avc: denied { > write } for pid=1814 comm="dovecot" name="dovecot.log" dev=sda1 ino=2098666 scontext=system_u:system_r:dovecot_t:s0 > tcontext=system_u:object_r:var_log_t:s0 tclass=file > Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.929:9): avc: denied { > append } for pid=1815 comm="dovecot" name="dovecot.log" dev=sda1 ino=2098666 scontext=system_u:system_r:dovecot_t:s0 > tcontext=system_u:object_r:var_log_t:s0 tclass=file > Sep 13 06:30:10 AlexSRVZ kernel: type=1400 audit(1221273010.930:10): avc: denied { > getattr } for pid=1815 comm="dovecot" path="/var/log/dovecot/dovecot.log" dev=sda1 > ino=2098666 scontext=system_u:system_r:dovecot_t:s0 tcontext=system_u:object_r:var_log_t:s0 > tclass=file > Sep 13 06:30:11 AlexSRVZ kernel: type=1400 audit(1221273011.002:11): avc: denied { > search } for pid=1818 comm="dovecot-auth" name="/" dev=sda1 ino=2 scontext=system_u:system_r:dovecot_auth_t:s0 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:30:11 AlexSRVZ kernel: type=1400 audit(1221273011.405:12): avc: denied { > search } for pid=1824 comm="postalias" name="/" dev=sda1 ino=2 scontext=system_u:system_r:postfix_master_t:s0 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:30:12 AlexSRVZ kernel: __ratelimit: 9 messages suppressed > Sep 13 06:30:12 AlexSRVZ kernel: type=1400 audit(1221273012.578:16): avc: denied { > read write } for pid=1875 comm="master" name="master.pid" dev=sda1 ino=2113634 scontext=system_u:system_r:postfix_master_t:s0 > tcontext=unconfined_u:object_r:var_run_t:s0 tclass=file > Sep 13 06:30:12 AlexSRVZ kernel: warning: `proftpd' uses 32-bit capabilities (legacy support > in use) > Sep 13 06:30:12 AlexSRVZ proftpd[1884]: AlexSRVZ - ProFTPD 1.3.1 (stable) (built Mon > Dec 17 12:45:01 EST 2007) standalone mode STARTUP > Sep 13 06:30:12 AlexSRVZ /usr/sbin/gpm[1892]: *** info [startup.c(95)]: > Sep 13 06:30:12 AlexSRVZ /usr/sbin/gpm[1892]: Started gpm successfully. Entered daemon > mode. > Sep 13 06:30:15 AlexSRVZ saslauthd[1928]: detach_tty : > master pid is: 1928 > Sep 13 06:30:15 AlexSRVZ saslauthd[1928]: ipc_init > : listening on socket: /var/run/saslauthd/mux > Sep 13 06:30:19 AlexSRVZ kernel: __ratelimit: 39 messages suppressed > Sep 13 06:30:19 AlexSRVZ kernel: type=1400 audit(1221273019.157:30): avc: denied { > search } for pid=1940 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.180:32): avc: denied { > getattr } for pid=2036 comm="smbd" path="/mnt/Data/Soft" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.190:33): avc: denied { > search } for pid=2036 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:36:43 AlexSRVZ kernel: type=1400 audit(1221273403.190:34): avc: denied { > read } for pid=2036 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.302:35): avc: denied { > getattr } for pid=2038 comm="smbd" path="/mnt/Data/Soft/TestFolder15/test.db" dev=sdb1 > ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 > tclass=file > Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.409:36): avc: denied { > read } for pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=file > Sep 13 06:37:10 AlexSRVZ kernel: type=1400 audit(1221273430.409:37): avc: denied { > lock } for pid=2038 comm="smbd" path="/mnt/Data/Soft/TestFolder15/test.db" dev=sdb1 > ino=3383298 scontext=system_u:system_r:smbd_t:s0 tcontext=system_u:object_r:file_t:s0 > tclass=file > Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:38): avc: denied { > write } for pid=2038 comm="smbd" name="/" dev=sdb1 ino=2 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:39): avc: denied { > remove_name } for pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=3383297 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.355:40): avc: denied { > rmdir } for pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=3383297 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:37:11 AlexSRVZ kernel: type=1400 audit(1221273431.362:41): avc: denied { > unlink } for pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=3383298 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=file > Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.438:42): avc: denied { > add_name } for pid=2038 comm="smbd" name="TestFolder15" scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.438:43): avc: denied { > create } for pid=2038 comm="smbd" name="TestFolder15" scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:37:13 AlexSRVZ kernel: type=1400 audit(1221273433.475:44): avc: denied { > setattr } for pid=2038 comm="smbd" name="TestFolder15" dev=sdb1 ino=48463873 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=dir > Sep 13 06:37:15 AlexSRVZ kernel: b44: eth1: powering down PHY > Sep 13 06:37:15 AlexSRVZ kernel: b44: eth1: Link is down. > Sep 13 06:37:18 AlexSRVZ kernel: b44: eth1: Link is up at 100 > Mbps, full duplex. > Sep 13 06:37:18 AlexSRVZ kernel: b44: eth1: Flow control is off for > TX and off for RX. > Sep 13 06:37:25 AlexSRVZ kernel: b44: eth1: powering down PHY > Sep 13 06:37:26 AlexSRVZ kernel: b44: eth1: Link is down. > Sep 13 06:37:28 AlexSRVZ kernel: b44: eth1: Link is up at 100 > Mbps, full duplex. > Sep 13 06:37:28 AlexSRVZ kernel: b44: eth1: Flow control is off for > TX and off for RX. > Sep 13 06:37:30 AlexSRVZ kernel: b44: eth1: powering down PHY > Sep 13 06:37:30 AlexSRVZ kernel: b44: eth1: Link is down. > Sep 13 06:37:33 AlexSRVZ kernel: b44: eth1: Link is up at 100 > Mbps, full duplex. > Sep 13 06:37:33 AlexSRVZ kernel: b44: eth1: Flow control is off for > TX and off for RX. > Sep 13 06:37:43 AlexSRVZ kernel: __ratelimit: 6 messages suppressed > Sep 13 06:37:43 AlexSRVZ kernel: type=1400 audit(1221273463.721:47): avc: denied { > setattr } for pid=2038 comm="smbd" name="test.db" dev=sdb1 ino=48463874 scontext=system_u:system_r:smbd_t:s0 > tcontext=system_u:object_r:file_t:s0 tclass=file > Sep 13 06:44:40 AlexSRVZ kernel: type=1400 audit(1221273880.622:48): avc: denied { > search } for pid=2069 comm="sshd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > Sep 13 06:44:42 AlexSRVZ kernel: type=1400 audit(1221273882.982:49): avc: denied { > search } for pid=1884 comm="proftpd" name="/" dev=sda1 ino=2 scontext=system_u:system_r:ftpd_t:s0 > tcontext=system_u:object_r:mnt_t:s0 tclass=dir > [root@AlexSRVZ log]# ethtool eth0 > Settings for eth0: > Supported ports: [ TP > MII ] > Supported link modes: > 10baseT/Half 10baseT/Full > > > 100baseT/Half 100baseT/Full > Supports auto-negotiation: Yes > Advertised link modes: > 10baseT/Half 10baseT/Full > > > 100baseT/Half 100baseT/Full > Advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: MII > PHYAD: 1 > Transceiver: internal > Auto-negotiation: on > [root@AlexSRVZ log]# ethtool eth1 > Settings for eth1: > Supported ports: [ MII > ] > Supported link modes: > 10baseT/Half 10baseT/Full > > > 100baseT/Half 100baseT/Full > Supports auto-negotiation: Yes > Advertised link modes: > 10baseT/Half 10baseT/Full > > > 100baseT/Half 100baseT/Full > Advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: Twisted Pair > PHYAD: 1 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: g > Wake-on: d > Current message level: 0x000000ff > (255) > Link detected: yes
	Введите код, изображенный на картинке:

При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру