Author: Thomas Weißschuh <linux@weissschuh.net>
Date: Sun Jun 9 09:27:16 2024 +0200
ACPI: battery: create alarm sysfs attribute atomically
[ Upstream commit a231eed10ed5a290129fda36ad7bcc263c53ff7d ]
Let the power supply core register the attribute.
This ensures that the attribute is created before the device is
announced to userspace, avoid a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Weißschuh <linux@weissschuh.net>
Date: Sun Jun 9 13:13:28 2024 +0200
ACPI: SBS: manage alarm sysfs attribute through psy core
[ Upstream commit 6bad28cfc30988a845fb3f59a99f4b8a4ce8fe95 ]
Let the power supply core register the attribute.
This ensures that the attribute is created before the device is
announced to userspace, avoiding a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Thu Jun 20 13:56:15 2024 -0700
af_unix: Don't retry after unix_state_lock_nested() in unix_stream_connect().
[ Upstream commit 1ca27e0c8c13ac50a4acf9cdf77069e2d94a547d ]
When a SOCK_(STREAM|SEQPACKET) socket connect()s to another one, we need
to lock the two sockets to check their states in unix_stream_connect().
We use unix_state_lock() for the server and unix_state_lock_nested() for
client with tricky sk->sk_state check to avoid deadlock.
The possible deadlock scenario are the following:
1) Self connect()
2) Simultaneous connect()
The former is simple, attempt to grab the same lock, and the latter is
AB-BA deadlock.
After the server's unix_state_lock(), we check the server socket's state,
and if it's not TCP_LISTEN, connect() fails with -EINVAL.
Then, we avoid the former deadlock by checking the client's state before
unix_state_lock_nested(). If its state is not TCP_LISTEN, we can make
sure that the client and the server are not identical based on the state.
Also, the latter deadlock can be avoided in the same way. Due to the
server sk->sk_state requirement, AB-BA deadlock could happen only with
TCP_LISTEN sockets. So, if the client's state is TCP_LISTEN, we can
give up the second lock to avoid the deadlock.
CPU 1 CPU 2 CPU 3
connect(A -> B) connect(B -> A) listen(A)
--- --- ---
unix_state_lock(B)
B->sk_state == TCP_LISTEN
READ_ONCE(A->sk_state) == TCP_CLOSE
^^^^^^^^^
ok, will lock A unix_state_lock(A)
.--------------' WRITE_ONCE(A->sk_state, TCP_LISTEN)
| unix_state_unlock(A)
|
| unix_state_lock(A)
| A->sk_sk_state == TCP_LISTEN
| READ_ONCE(B->sk_state) == TCP_LISTEN
v ^^^^^^^^^^
unix_state_lock_nested(A) Don't lock B !!
Currently, while checking the client's state, we also check if it's
TCP_ESTABLISHED, but this is unlikely and can be checked after we know
the state is not TCP_CLOSE.
Moreover, if it happens after the second lock, we now jump to the restart
label, but it's unlikely that the server is not found during the retry,
so the jump is mostly to revist the client state check.
Let's remove the retry logic and check the state against TCP_CLOSE first.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Tue Aug 6 08:49:16 2024 +0200
ALSA: hda/hdmi: Yet more pin fix for HP EliteDesk 800 G4
commit 176fd1511dd9086ab4fa9323cb232177c6235288 upstream.
HP EliteDesk 800 G4 (PCI SSID 103c:83e2) is another Kabylake machine
where BIOS misses the HDMI pin initializations. Add the quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240806064918.11132-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dustin L. Howett <dustin@howett.net>
Date: Tue Aug 6 21:33:51 2024 -0500
ALSA: hda/realtek: Add Framework Laptop 13 (Intel Core Ultra) to quirks
commit eb91c456f3714c336f0812dccab422ec0e72bde4 upstream.
The Framework Laptop 13 (Intel Core Ultra) has an ALC285 that ships in a
similar configuration to the ALC295 in previous models. It requires the
same quirk for headset detection.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240806-alsa-hda-realtek-add-framework-laptop-13-intel-core-ultra-to-quirks-v1-1-42d6ce2dbf14@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven 'Steve' Kendall <skend@chromium.org>
Date: Tue Aug 6 00:08:24 2024 +0000
ALSA: hda: Add HP MP9 G4 Retail System AMS to force connect list
commit 7e1e206b99f4b3345aeb49d94584a420b7887f1d upstream.
In recent HP UEFI firmware (likely v2.15 and above, tested on 2.27),
these pins are incorrectly set for HDMI/DP audio. Tested on
HP MP9 G4 Retail System AMS. Tested audio with two monitors connected
via DisplayPort.
Link: https://forum.manjaro.org/t/intel-cannon-lake-pch-cavs-conexant-cx20632-no-sound-at-hdmi-or-displayport/133494
Link: https://bbs.archlinux.org/viewtopic.php?id=270523
Signed-off-by: Steven 'Steve' Kendall <skend@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240806-hdmi-audio-hp-wrongpins-v2-1-d9eb4ad41043@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Mon Aug 5 15:01:28 2024 +0200
ALSA: line6: Fix racy access to midibuf
commit 15b7a03205b31bc5623378c190d22b7ff60026f1 upstream.
There can be concurrent accesses to line6 midibuf from both the URB
completion callback and the rawmidi API access. This could be a cause
of KMSAN warning triggered by syzkaller below (so put as reported-by
here).
This patch protects the midibuf call of the former code path with a
spinlock for avoiding the possible races.
Reported-by: syzbot+78eccfb8b3c9a85fc6c5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000000949c061df288c5@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240805130129.10872-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Thu Aug 8 10:18:01 2024 +0200
ALSA: usb-audio: Re-add ScratchAmp quirk entries
[ Upstream commit 03898691d42e0170e7d00f07cbe21ce0e9f3a8fa ]
At the code refactoring of USB-audio quirk handling, I assumed that
the quirk entries of Stanton ScratchAmp devices were only about the
device name, and moved them completely into the rename table.
But it seems that the device requires the quirk entry so that it's
probed by the driver itself.
This re-adds back the quirk entries of ScratchAmp, but in a
minimalistic manner.
Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Link: https://patch.msgid.link/20240808081803.22300-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Besar Wicaksono <bwicaksono@nvidia.com>
Date: Fri Aug 9 10:57:33 2024 +0100
arm64: Add Neoverse-V2 part
[ Upstream commit f4d9d9dcc70b96b5e5d7801bd5fbf8491b07b13d ]
Add the part number and MIDR for Neoverse-V2
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240109192310.16234-2-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:34 2024 +0100
arm64: barrier: Restore spec_bar() macro
[ Upstream commit ebfc726eae3f31bdb5fae1bbd74ef235d71046ca ]
Upcoming errata workarounds will need to use SB from C code. Restore the
spec_bar() macro so that we can use SB.
This is effectively a revert of commit:
4f30ba1cce36d413 ("arm64: barrier: Remove spec_bar() macro")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:39 2024 +0100
arm64: cputype: Add Cortex-A720 definitions
[ Upstream commit add332c40328cf06fe35e4b3cde8ec315c4629e5 ]
Add cputype definitions for Cortex-A720. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-186 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-A720 TRM, which can be found at:
https://developer.arm.com/documentation/102530/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:44 2024 +0100
arm64: cputype: Add Cortex-A725 definitions
[ Upstream commit 9ef54a384526911095db465e77acc1cb5266b32c ]
Add cputype definitions for Cortex-A725. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-A725 TRM:
https://developer.arm.com/documentation/107652/0001/
... in table A-247 ("MIDR_EL1 bit descriptions").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:43 2024 +0100
arm64: cputype: Add Cortex-X1C definitions
[ Upstream commit 58d245e03c324d083a0ec3b9ab8ebd46ec9848d7 ]
Add cputype definitions for Cortex-X1C. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-X1C TRM:
https://developer.arm.com/documentation/101968/0002/
... in section B2.107 ("MIDR_EL1, Main ID Register, EL1").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:38 2024 +0100
arm64: cputype: Add Cortex-X3 definitions
[ Upstream commit be5a6f238700f38b534456608588723fba96c5ab ]
Add cputype definitions for Cortex-X3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-263 ("MIDR_EL1 bit descriptions")
in issue 07 of the Cortex-X3 TRM, which can be found at:
https://developer.arm.com/documentation/101593/0102/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:35 2024 +0100
arm64: cputype: Add Cortex-X4 definitions
[ Upstream commit 02a0a04676fa7796d9cbc9eb5ca120aaa194d2dd ]
Add cputype definitions for Cortex-X4. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-X4 TRM, which can be found at:
https://developer.arm.com/documentation/102484/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflict (dealt with upstream via a later merge) ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:40 2024 +0100
arm64: cputype: Add Cortex-X925 definitions
[ Upstream commit fd2ff5f0b320f418288e7a1f919f648fbc8a0dfc ]
Add cputype definitions for Cortex-X925. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-285 ("MIDR_EL1 bit descriptions")
in issue 0001-05 of the Cortex-X925 TRM, which can be found at:
https://developer.arm.com/documentation/102807/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:36 2024 +0100
arm64: cputype: Add Neoverse-V3 definitions
[ Upstream commit 0ce85db6c2141b7ffb95709d76fc55a27ff3cdc1 ]
Add cputype definitions for Neoverse-V3. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0001-04 of the Neoverse-V3 TRM, which can be found at:
https://developer.arm.com/documentation/107734/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:37 2024 +0100
arm64: errata: Add workaround for Arm errata 3194386 and 3312417
[ Upstream commit 7187bb7d0b5c7dfa18ca82e9e5c75e13861b1d88 ]
Cortex-X4 and Neoverse-V3 suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time. This is described in their Software Developer Errata Notice (SDEN)
documents:
* Cortex-X4 SDEN v8.0, erratum 3194386:
https://developer.arm.com/documentation/SDEN-2432808/0800/
* Neoverse-V3 SDEN v6.0, erratum 3312417:
https://developer.arm.com/documentation/SDEN-2891958/0600/
To workaround these errata, it is necessary to place a speculation
barrier (SB) after MSR to the SSBS special-purpose register. This patch
adds the requisite SB after writes to SSBS within the kernel, and hides
the presence of SSBS from EL0 such that userspace software which cares
about SSBS will manipulate this via prctl(PR_GET_SPECULATION_CTRL, ...).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflicts, drop unneeded cpucaps.h, fold in user_feature_fixup() ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:42 2024 +0100
arm64: errata: Expand speculative SSBS workaround
[ Upstream commit 75b3c43eab594bfbd8184ec8ee1a6b820950819a ]
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for Cortex-X4 and Neoverse-V3, in commit:
7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
... as per their Software Developer Errata Notice (SDEN) documents:
* Cortex-X4 SDEN v8.0, erratum 3194386:
https://developer.arm.com/documentation/SDEN-2432808/0800/
* Neoverse-V3 SDEN v6.0, erratum 3312417:
https://developer.arm.com/documentation/SDEN-2891958/0600/
Since then, similar errata have been published for a number of other Arm Ltd
CPUs, for which the mitigation is the same. This is described in their
respective SDEN documents:
* Cortex-A710 SDEN v19.0, errataum 3324338
https://developer.arm.com/documentation/SDEN-1775101/1900/?lang=en
* Cortex-A720 SDEN v11.0, erratum 3456091
https://developer.arm.com/documentation/SDEN-2439421/1100/?lang=en
* Cortex-X2 SDEN v19.0, erratum 3324338
https://developer.arm.com/documentation/SDEN-1775100/1900/?lang=en
* Cortex-X3 SDEN v14.0, erratum 3324335
https://developer.arm.com/documentation/SDEN-2055130/1400/?lang=en
* Cortex-X925 SDEN v8.0, erratum 3324334
https://developer.arm.com/documentation/109108/800/?lang=en
* Neoverse-N2 SDEN v17.0, erratum 3324339
https://developer.arm.com/documentation/SDEN-1982442/1700/?lang=en
* Neoverse-V2 SDEN v9.0, erratum 3324336
https://developer.arm.com/documentation/SDEN-2332927/900/?lang=en
Note that due to shared design lineage, some CPUs share the same erratum
number.
Add these to the existing mitigation under CONFIG_ARM64_ERRATUM_3194386.
As listing all of the erratum IDs in the runtime description would be
unwieldy, this is reduced to:
"SSBS not fully self-synchronizing"
... matching the description of the errata in all of the SDENs.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fix conflicts in silicon-errata.rst ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:45 2024 +0100
arm64: errata: Expand speculative SSBS workaround (again)
[ Upstream commit adeec61a4723fd3e39da68db4cc4d924e6d7f641 ]
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
* 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
* 75b3c43eab594bfb ("arm64: errata: Expand speculative SSBS workaround")
Since then, similar errata have been published for a number of other Arm
Ltd CPUs, for which the same mitigation is sufficient. This is described
in their respective Software Developer Errata Notice (SDEN) documents:
* Cortex-A76 (MP052) SDEN v31.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885749/3100/
* Cortex-A77 (MP074) SDEN v19.0, erratum 3324348
https://developer.arm.com/documentation/SDEN-1152370/1900/
* Cortex-A78 (MP102) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401784/2100/
* Cortex-A78C (MP138) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707916/1600/
* Cortex-A78C (MP154) SDEN v10.0, erratum 3324347
https://developer.arm.com/documentation/SDEN-2004089/1000/
* Cortex-A725 (MP190) SDEN v5.0, erratum 3456106
https://developer.arm.com/documentation/SDEN-2832921/0500/
* Cortex-X1 (MP077) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401782/2100/
* Cortex-X1C (MP136) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707914/1600/
* Neoverse-N1 (MP050) SDEN v32.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885747/3200/
* Neoverse-V1 (MP076) SDEN v19.0, erratum 3324341
https://developer.arm.com/documentation/SDEN-1401781/1900/
Note that due to the manner in which Arm develops IP and tracks errata,
some CPUs share a common erratum number and some CPUs have multiple
erratum numbers for the same HW issue.
On parts without SB, it is necessary to use ISB for the workaround. The
spec_bar() macro used in the mitigation will expand to a "DSB SY; ISB"
sequence in this case, which is sufficient on all affected parts.
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list. The list is sorted alphanumerically (involving
moving Neoverse-V3 after Neoverse-V2) so that this is easy to audit and
potentially extend again in future. The Kconfig text is also updated to
clarify the set of affected parts and the mitigation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240801101803.1982459-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fix conflicts in silicon-errata.rst ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Fri Aug 9 10:57:41 2024 +0100
arm64: errata: Unify speculative SSBS errata logic
[ Upstream commit ec768766608092087dfb5c1fc45a16a6f524dee2 ]
Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical,
with duplicate Kconfig text and some unsightly ifdeffery. While we try
to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having
separate options results in a fair amount of boilerplate code, and this
will only get worse as we expand the set of affected CPUs.
To reduce this boilerplate, unify the two behind a common Kconfig
option. This removes the duplicate text and Kconfig logic, and removes
the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option.
The set of affected CPUs is described as a list so that this can easily
be extended.
I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as
the common option, matching the way we use ARM64_ERRATUM_1319367 to
cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fix conflicts, drop unneeded cpucaps.h ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Wed Aug 7 19:02:27 2024 +0200
ASoC: amd: yc: Add quirk entry for OMEN by HP Gaming Laptop 16-n0xxx
commit 6675e76a5c441b52b1b983ebb714122087020ebe upstream.
Fix the missing mic on OMEN by HP Gaming Laptop 16-n0xxx by adding the
quirk entry with the board ID 8A44.
Cc: stable@vger.kernel.org
Link: https://bugzilla.suse.com/show_bug.cgi?id=1227182
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807170249.16490-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri Jul 26 16:10:42 2024 +0200
ASoC: codecs: wcd938x-sdw: Correct Soundwire ports mask
[ Upstream commit 3f6fb03dae9c7dfba7670858d29e03c8faaa89fe ]
Device has up to WCD938X_MAX_SWR_PORTS number of ports and the array
assigned to prop.src_dpn_prop and prop.sink_dpn_prop has
0..WCD938X_MAX_SWR_PORTS-1 elements. On the other hand, GENMASK(high,
low) creates an inclusive mask between <high, low>, so we need the mask
from 0 up to WCD938X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-2-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri Jul 26 16:10:44 2024 +0200
ASoC: codecs: wsa881x: Correct Soundwire ports mask
[ Upstream commit eb11c3bb64ad0a05aeacdb01039863aa2aa3614b ]
Device has up to WSA881X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA881X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA881X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-4-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri Jul 26 16:10:45 2024 +0200
ASoC: codecs: wsa883x: Correct Soundwire ports mask
[ Upstream commit 6801ac36f25690e14955f7f9eace1eaa29edbdd0 ]
Device has up to WSA883X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA883X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA883X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-5-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Thu Jun 27 15:44:39 2024 +0100
ASoC: codecs: wsa883x: parse port-mapping information
[ Upstream commit 1cf3295bd108abbd7f128071ae9775fd18394ca9 ]
Add support to parse static master port map information from device tree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-2-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 6801ac36f256 ("ASoC: codecs: wsa883x: Correct Soundwire ports mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri Jul 26 16:10:46 2024 +0200
ASoC: codecs: wsa884x: Correct Soundwire ports mask
[ Upstream commit dcb6631d05152930e2ea70fd2abfd811b0e970b5 ]
Device has up to WSA884X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA884X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA884X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: aa21a7d4f68a ("ASoC: codecs: wsa884x: Add WSA884x family of speakers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-6-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Thu Jun 27 15:44:41 2024 +0100
ASoC: codecs: wsa884x: parse port-mapping information
[ Upstream commit e1bc5c324bcca3acdbe817ccbf9aa7992d89479d ]
Add support to parse static master port map information from device tree.
This is required for correct port mapping between soundwire device and
master ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-4-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: dcb6631d0515 ("ASoC: codecs: wsa884x: Correct Soundwire ports mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jerome Brunet <jbrunet@baylibre.com>
Date: Wed Aug 7 18:27:03 2024 +0200
ASoC: meson: axg-fifo: fix irq scheduling issue with PREEMPT_RT
[ Upstream commit 5003d0ce5c7da3a02c0aff771f516f99731e7390 ]
With PREEMPT_RT enabled a spinlock_t becomes a sleeping lock.
This is usually not a problem with spinlocks used in IRQ context since
IRQ handlers get threaded. However, if IRQF_ONESHOT is set, the primary
handler won't be force-threaded and runs always in hardirq context. This is
a problem because spinlock_t requires a preemptible context on PREEMPT_RT.
In this particular instance, regmap mmio uses spinlock_t to protect the
register access and IRQF_ONESHOT is set on the IRQ. In this case, it is
actually better to do everything in threaded handler and it solves the
problem with PREEMPT_RT.
Reported-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Closes: https://lore.kernel.org/linux-amlogic/20240729131652.3012327-1-avkrasnov@salutedevices.com
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: b11d26660dff ("ASoC: meson: axg-fifo: use threaded irq to check periods")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240807162705.4024136-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Curtis Malainey <cujomalainey@chromium.org>
Date: Wed Jul 31 14:21:44 2024 -0700
ASoC: SOF: Remove libraries from topology lookups
[ Upstream commit 7354eb7f1558466e92e926802d36e69e42938ea9 ]
Default firmware shipped in open source are not licensed for 3P
libraries, therefore topologies should not reference them.
If a OS wants to use 3P (that they have licensed) then they should use
the appropriate topology override mechanisms.
Fixes: 8a7d5d85ed2161 ("ASoC: SOF: mediatek: mt8195: Add devicetree support to select topologies")
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Cc: Wojciech Macek <wmacek@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240731212153.921327-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jerome Audu <jau@free.fr>
Date: Sat Jul 27 15:40:15 2024 +0200
ASoC: sti: add missing probe entry for player and reader
[ Upstream commit 6b99068d5ea0aa295f15f30afc98db74d056ec7b ]
This patch addresses a regression in the ASoC STI drivers that was
introduced in Linux version 6.6.y. The issue originated from a series of
patches (see https://lore.kernel.org/all/87wmy5b0wt.wl-kuninori.morimoto.gx@renesas.com/)
that unintentionally omitted necessary probe functions for the player
and reader components.
Probe function in `sound/soc/sti/sti_uniperif.c:415` is being replaced
by another probe function located at `sound/soc/sti/sti_uniperif.c:453`,
which should instead be derived from the player and reader components.
This patch correctly reinserts the missing probe entries,
restoring the intended functionality.
Fixes: 9f625f5e6cf9 ("ASoC: sti: merge DAI call back functions into ops")
Signed-off-by: Jerome Audu <jau@free.fr>
Link: https://patch.msgid.link/20240727-sti-audio-fix-v2-1-208bde546c3f@free.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Mon May 27 17:40:10 2024 +0200
block: change rq_integrity_vec to respect the iterator
[ Upstream commit cf546dd289e0f6d2594c25e2fb4e19ee67c6d988 ]
If we allocate a bio that is larger than NVMe maximum request size,
attach integrity metadata to it and send it to the NVMe subsystem, the
integrity metadata will be corrupted.
Splitting the bio works correctly. The function bio_split will clone the
bio, trim the iterator of the first bio and advance the iterator of the
second bio.
However, the function rq_integrity_vec has a bug - it returns the first
vector of the bio's metadata and completely disregards the metadata
iterator that was advanced when the bio was split. Thus, the second bio
uses the same metadata as the first bio and this leads to metadata
corruption.
This commit changes rq_integrity_vec, so that it calls mp_bvec_iter_bvec
instead of returning the first vector. mp_bvec_iter_bvec reads the
iterator and uses it to build a bvec for the current position in the
iterator.
The "queue_max_integrity_segments(rq->q) > 1" check was removed, because
the updated rq_integrity_vec function works correctly with multiple
segments.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/49d1afaa-f934-6ed2-a678-e0d428c63a65@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Wed Jun 26 19:01:58 2024 -0600
block: use the right type for stub rq_integrity_vec()
commit 69b6517687a4b1fb250bd8c9c193a0a304c8ba17 upstream.
For !CONFIG_BLK_DEV_INTEGRITY, rq_integrity_vec() wasn't updated
properly. Fix it up.
Fixes: cf546dd289e0 ("block: change rq_integrity_vec to respect the iterator")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luke Wang <ziniu.wang_1@nxp.com>
Date: Fri May 17 19:15:35 2024 +0800
Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloading
[ Upstream commit 0d0df1e750bac0fdaa77940e711c1625cff08d33 ]
When unload the btnxpuart driver, its associated timer will be deleted.
If the timer happens to be modified at this moment, it leads to the
kernel call this timer even after the driver unloaded, resulting in
kernel panic.
Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming.
panic log:
Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP
Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart]
CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1
Hardware name: NXP i.MX95 19X19 board (DT)
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0xffff80007a2cf464
lr : call_timer_fn.isra.0+0x24/0x80
...
Call trace:
0xffff80007a2cf464
__run_timers+0x234/0x280
run_timer_softirq+0x20/0x40
__do_softirq+0x100/0x26c
____do_softirq+0x10/0x1c
call_on_irq_stack+0x24/0x4c
do_softirq_own_stack+0x1c/0x2c
irq_exit_rcu+0xc0/0xdc
el0_interrupt+0x54/0xd8
__el0_irq_handler_common+0x18/0x24
el0t_64_irq_handler+0x10/0x1c
el0t_64_irq+0x190/0x194
Code: ???????? ???????? ???????? ???????? (????????)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0,c0000000,40028143,1000721b
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anton Khirnov <anton@khirnov.net>
Date: Mon Jul 29 21:58:10 2024 +0200
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
[ Upstream commit b5431dc2803ac159d6d4645ae237d15c3cb252db ]
This restores behaviour (including the comment) from now-removed
hci_request.c, and also matches existing code for active scanning.
Without this, the duplicates filter is always active when passive
scanning, which makes it impossible to work with devices that send
nontrivial dynamic data in their advertisement reports.
Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Wed Jul 31 12:19:36 2024 +0300
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
[ Upstream commit c531e63871c0b50c8c4e62c048535a08886fba3e ]
Add missing call to 'l2cap_chan_unlock()' on receive error handling
path in 'l2cap_conless_channel()'.
Fixes: a24cce144b98 ("Bluetooth: Fix reference counting of global L2CAP channels")
Reported-by: syzbot+45ac74737e866894acb0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=45ac74737e866894acb0
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Menglong Dong <menglong8.dong@gmail.com>
Date: Mon Aug 5 14:01:21 2024 +0900
bpf: kprobe: remove unused declaring of bpf_kprobe_override
[ Upstream commit 0e8b53979ac86eddb3fd76264025a70071a25574 ]
After the commit 66665ad2f102 ("tracing/kprobe: bpf: Compare instruction
pointer with original one"), "bpf_kprobe_override" is not used anywhere
anymore, and we can remove it now.
Link: https://lore.kernel.org/all/20240710085939.11520-1-dongml2@chinatelecom.cn/
Fixes: 66665ad2f102 ("tracing/kprobe: bpf: Compare instruction pointer with original one")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Fri Jul 19 18:56:46 2024 +0930
btrfs: avoid using fixed char array size for tree names
commit 12653ec36112ab55fa06c01db7c4432653d30a8d upstream.
[BUG]
There is a bug report that using the latest trunk GCC 15, btrfs would cause
unterminated-string-initialization warning:
linux-6.6/fs/btrfs/print-tree.c:29:49: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
29 | { BTRFS_BLOCK_GROUP_TREE_OBJECTID, "BLOCK_GROUP_TREE" },
|
^~~~~~~~~~~~~~~~~~
[CAUSE]
To print tree names we have an array of root_name_map structure, which
uses "char name[16];" to store the name string of a tree.
But the following trees have names exactly at 16 chars length:
- "BLOCK_GROUP_TREE"
- "RAID_STRIPE_TREE"
This means we will have no space for the terminating '\0', and can lead
to unexpected access when printing the name.
[FIX]
Instead of "char name[16];" use "const char *" instead.
Since the name strings are all read-only data, and are all NULL
terminated by default, there is not much need to bother the length at
all.
Reported-by: Sam James <sam@gentoo.org>
Reported-by: Alejandro Colomar <alx@kernel.org>
Fixes: edde81f1abf29 ("btrfs: add raid stripe tree pretty printer")
Fixes: 9c54e80ddc6bd ("btrfs: add code to support the block group root")
CC: stable@vger.kernel.org # 6.1+
Suggested-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Wed Mar 6 08:21:54 2024 +1030
btrfs: do not clear page dirty inside extent_write_locked_range()
[ Upstream commit 97713b1a2ced1e4a2a6c40045903797ebd44d7e0 ]
[BUG]
For subpage + zoned case, the following workload can lead to rsv data
leak at unmount time:
# mkfs.btrfs -f -s 4k $dev
# mount $dev $mnt
# fsstress -w -n 8 -d $mnt -s 1709539240
0/0: fiemap - no filename
0/1: copyrange read - no filename
0/2: write - no filename
0/3: rename - no source filename
0/4: creat f0 x:0 0 0
0/4: creat add id=0,parent=-1
0/5: writev f0[259 1 0 0 0 0] [778052,113,965] 0
0/6: ioctl(FIEMAP) f0[259 1 0 0 224 887097] [1294220,2291618343991484791,0x10000] -1
0/7: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 224 887097] return 25, fallback to stat()
0/7: dwrite f0[259 1 0 0 224 887097] [696320,102400] 0
# umount $mnt
The dmesg includes the following rsv leak detection warning (all call
trace skipped):
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8653 btrfs_destroy_inode+0x1e0/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8654 btrfs_destroy_inode+0x1a8/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8660 btrfs_destroy_inode+0x1a0/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): last unmount of filesystem 1b4abba9-de34-4f07-9e7f-157cf12a18d6
------------[ cut here ]------------
WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): space_info DATA has 268218368 free, is not full
BTRFS info (device sda): space_info total=268435456, used=204800, pinned=0, reserved=0, may_use=12288, readonly=0 zone_unusable=0
BTRFS info (device sda): global_block_rsv: size 0 reserved 0
BTRFS info (device sda): trans_block_rsv: size 0 reserved 0
BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0
------------[ cut here ]------------
WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): space_info METADATA has 267796480 free, is not full
BTRFS info (device sda): space_info total=268435456, used=131072, pinned=0, reserved=0, may_use=262144, readonly=0 zone_unusable=245760
BTRFS info (device sda): global_block_rsv: size 0 reserved 0
BTRFS info (device sda): trans_block_rsv: size 0 reserved 0
BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0
Above $dev is a tcmu-runner emulated zoned HDD, which has a max zone
append size of 64K, and the system has 64K page size.
[CAUSE]
I have added several trace_printk() to show the events (header skipped):
> btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688
> btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288
> btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536
> btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864
The above lines show our buffered write has dirtied 3 pages of inode
259 of root 5:
704K 768K 832K 896K
I |////I/////////////////I///////////| I
756K 868K
|///| is the dirtied range using subpage bitmaps. and 'I' is the page
boundary.
Meanwhile all three pages (704K, 768K, 832K) have their PageDirty
flag set.
> btrfs_direct_write: r/i=5/259 start dio filepos=696320 len=102400
Then direct IO write starts, since the range [680K, 780K) covers the
beginning part of the above dirty range, we need to writeback the
two pages at 704K and 768K.
> cow_file_range: r/i=5/259 add ordered extent filepos=774144 len=65536
> extent_write_locked_range: r/i=5/259 locked page=720896 start=774144 len=65536
Now the above 2 lines show that we're writing back for dirty range
[756K, 756K + 64K).
We only writeback 64K because the zoned device has max zone append size
as 64K.
> extent_write_locked_range: r/i=5/259 clear dirty for page=786432
!!! The above line shows the root cause. !!!
We're calling clear_page_dirty_for_io() inside extent_write_locked_range(),
for the page 768K.
This is because extent_write_locked_range() can go beyond the current
locked page, here we hit the page at 768K and clear its page dirt.
In fact this would lead to the desync between subpage dirty and page
dirty flags. We have the page dirty flag cleared, but the subpage range
[820K, 832K) is still dirty.
After the writeback of range [756K, 820K), the dirty flags look like
this, as page 768K no longer has dirty flag set.
704K 768K 832K 896K
I I | I/////////////| I
820K 868K
This means we will no longer writeback range [820K, 832K), thus the
reserved data/metadata space would never be properly released.
> extent_write_cache_pages: r/i=5/259 skip non-dirty folio=786432
Now even though we try to start writeback for page 768K, since the
page is not dirty, we completely skip it at extent_write_cache_pages()
time.
> btrfs_direct_write: r/i=5/259 dio done filepos=696320 len=0
Now the direct IO finished.
> cow_file_range: r/i=5/259 add ordered extent filepos=851968 len=36864
> extent_write_locked_range: r/i=5/259 locked page=851968 start=851968 len=36864
Now we writeback the remaining dirty range, which is [832K, 868K).
Causing the range [820K, 832K) never to be submitted, thus leaking the
reserved space.
This bug only affects subpage and zoned case. For non-subpage and zoned
case, we have exactly one sector for each page, thus no such partial dirty
cases.
For subpage and non-zoned case, we never go into run_delalloc_cow(), and
normally all the dirty subpage ranges would be properly submitted inside
__extent_writepage_io().
[FIX]
Just do not clear the page dirty at all inside extent_write_locked_range().
As __extent_writepage_io() would do a more accurate, subpage compatible
clear for page and subpage dirty flags anyway.
Now the correct trace would look like this:
> btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688
> btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288
> btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536
> btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864
The page dirty part is still the same 3 pages.
> btrfs_direct_write: r/i=5/259 start dio filepos=696320 len=102400
> cow_file_range: r/i=5/259 add ordered extent filepos=774144 len=65536
> extent_write_locked_range: r/i=5/259 locked page=720896 start=774144 len=65536
And the writeback for the first 64K is still correct.
> cow_file_range: r/i=5/259 add ordered extent filepos=839680 len=49152
> extent_write_locked_range: r/i=5/259 locked page=786432 start=839680 len=49152
Now with the fix, we can properly writeback the range [820K, 832K), and
properly release the reserved data/metadata space.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Wed Jul 3 15:40:59 2024 +0100
btrfs: fix bitmap leak when loading free space cache on duplicate entry
[ Upstream commit 320d8dc612660da84c3b70a28658bb38069e5a9a ]
If we failed to link a free space entry because there's already a
conflicting entry for the same offset, we free the free space entry but
we don't free the associated bitmap that we had just allocated before.
Fix that by freeing the bitmap before freeing the entry.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Fri Jul 26 11:12:52 2024 +0100
btrfs: fix corruption after buffer fault in during direct IO append write
commit 939b656bc8ab203fdbde26ccac22bcb7f0985be5 upstream.
During an append (O_APPEND write flag) direct IO write if the input buffer
was not previously faulted in, we can corrupt the file in a way that the
final size is unexpected and it includes an unexpected hole.
The problem happens like this:
1) We have an empty file, with size 0, for example;
2) We do an O_APPEND direct IO with a length of 4096 bytes and the input
buffer is not currently faulted in;
3) We enter btrfs_direct_write(), lock the inode and call
generic_write_checks(), which calls generic_write_checks_count(), and
that function sets the iocb position to 0 with the following code:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
4) We call btrfs_dio_write() and enter into iomap, which will end up
calling btrfs_dio_iomap_begin() and that calls
btrfs_get_blocks_direct_write(), where we update the i_size of the
inode to 4096 bytes;
5) After btrfs_dio_iomap_begin() returns, iomap will attempt to access
the page of the write input buffer (at iomap_dio_bio_iter(), with a
call to bio_iov_iter_get_pages()) and fail with -EFAULT, which gets
returned to btrfs at btrfs_direct_write() via btrfs_dio_write();
6) At btrfs_direct_write() we get the -EFAULT error, unlock the inode,
fault in the write buffer and then goto to the label 'relock';
7) We lock again the inode, do all the necessary checks again and call
again generic_write_checks(), which calls generic_write_checks_count()
again, and there we set the iocb's position to 4K, which is the current
i_size of the inode, with the following code pointed above:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
8) Then we go again to btrfs_dio_write() and enter iomap and the write
succeeds, but it wrote to the file range [4K, 8K), leaving a hole in
the [0, 4K) range and an i_size of 8K, which goes against the
expectations of having the data written to the range [0, 4K) and get an
i_size of 4K.
Fix this by not unlocking the inode before faulting in the input buffer,
in case we get -EFAULT or an incomplete write, and not jumping to the
'relock' label after faulting in the buffer - instead jump to a location
immediately before calling iomap, skipping all the write checks and
relocking. This solves this problem and it's fine even in case the input
buffer is memory mapped to the same file range, since only holding the
range locked in the inode's io tree can cause a deadlock, it's safe to
keep the inode lock (VFS lock), as was fixed and described in commit
51bd9563b678 ("btrfs: fix deadlock due to page faults during direct IO
reads and writes").
A sample reproducer provided by a reporter is the following:
$ cat test.c
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <fcntl.h>
#include <stdio.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
if (argc < 2) {
fprintf(stderr, "Usage: %s <test file>\n", argv[0]);
return 1;
}
int fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT |
O_APPEND, 0644);
if (fd < 0) {
perror("creating test file");
return 1;
}
char *buf = mmap(NULL, 4096, PROT_READ,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ssize_t ret = write(fd, buf, 4096);
if (ret < 0) {
perror("pwritev2");
return 1;
}
struct stat stbuf;
ret = fstat(fd, &stbuf);
if (ret < 0) {
perror("stat");
return 1;
}
printf("size: %llu\n", (unsigned long long)stbuf.st_size);
return stbuf.st_size == 4096 ? 0 : 1;
}
A test case for fstests will be sent soon.
Reported-by: Hanna Czenczek <hreitz@redhat.com>
Link: https://lore.kernel.org/linux-btrfs/0b841d46-12fe-4e64-9abb-871d8d0de271@redhat.com/
Fixes: 8184620ae212 ("btrfs: fix lost file sync on direct IO write with nowait and dsync iocb")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Fri Aug 2 09:38:51 2024 +0100
btrfs: fix double inode unlock for direct IO sync writes
commit e0391e92f9ab4fb3dbdeb139c967dcfa7ac4b115 upstream.
If we do a direct IO sync write, at btrfs_sync_file(), and we need to skip
inode logging or we get an error starting a transaction or an error when
flushing delalloc, we end up unlocking the inode when we shouldn't under
the 'out_release_extents' label, and then unlock it again at
btrfs_direct_write().
Fix that by checking if we have to skip inode unlocking under that label.
Reported-by: syzbot+7dbbb74af6291b5a5a8b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000dfd631061eaeb4bc@google.com/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Sun Jan 22 21:30:41 2023 +0100
can: mcp251xfd: tef: prepare to workaround broken TEF FIFO tail index erratum
[ Upstream commit b8e0ddd36ce9536ad7478dd27df06c9ae92370ba ]
This is a preparatory patch to work around a problem similar to
erratum DS80000789E 6 of the mcp2518fd, the other variants of the chip
family (mcp2517fd and mcp251863) are probably also affected.
Erratum DS80000789E 6 says "reading of the FIFOCI bits in the FIFOSTA
register for an RX FIFO may be corrupted". However observation shows
that this problem is not limited to RX FIFOs but also effects the TEF
FIFO.
When handling the TEF interrupt, the driver reads the FIFO header
index from the TEF FIFO STA register of the chip.
In the bad case, the driver reads a too large head index. In the
original code, the driver always trusted the read value, which caused
old CAN transmit complete events that were already processed to be
re-processed.
Instead of reading and trusting the head index, read the head index
and calculate the number of CAN frames that were supposedly received -
replace mcp251xfd_tef_ring_update() with mcp251xfd_get_tef_len().
The mcp251xfd_handle_tefif() function reads the CAN transmit complete
events from the chip, iterates over them and pushes them into the
network stack. The original driver already contains code to detect old
CAN transmit complete events, that will be updated in the next patch.
Cc: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Sun Jan 22 22:35:03 2023 +0100
can: mcp251xfd: tef: update workaround for erratum DS80000789E 6 of mcp2518fd
[ Upstream commit 3a0a88fcbaf9e027ecca3fe8775be9700b4d6460 ]
This patch updates the workaround for a problem similar to erratum
DS80000789E 6 of the mcp2518fd, the other variants of the chip
family (mcp2517fd and mcp251863) are probably also affected.
Erratum DS80000789E 6 says "reading of the FIFOCI bits in the FIFOSTA
register for an RX FIFO may be corrupted". However observation shows
that this problem is not limited to RX FIFOs but also effects the TEF
FIFO.
In the bad case, the driver reads a too large head index. As the FIFO
is implemented as a ring buffer, this results in re-handling old CAN
transmit complete events.
Every transmit complete event contains with a sequence number that
equals to the sequence number of the corresponding TX request. This
way old TX complete events can be detected.
If the original driver detects a non matching sequence number, it
prints an info message and tries again later. As wrong sequence
numbers can be explained by the erratum DS80000789E 6, demote the info
message to debug level, streamline the code and update the comments.
Keep the behavior: If an old CAN TX complete event is detected, abort
the iteration and mark the number of valid CAN TX complete events as
processed in the chip by incrementing the FIFO's tail index.
Cc: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gleb Korobeynikov <gkorobeynikov@astralinux.ru>
Date: Thu Aug 8 18:47:48 2024 +0300
cifs: cifs_inval_name_dfs_link_error: correct the check for fullpath
[ Upstream commit 36bb22a08a69d9984a8399c07310d18b115eae20 ]
Replace the always-true check tcon->origin_fullpath with
check of server->leaf_fullpath
See https://bugzilla.kernel.org/show_bug.cgi?id=219083
The check of the new @tcon will always be true during mounting,
since @tcon->origin_fullpath will only be set after the tree is
connected to the latest common resource, as well as checking if
the prefix paths from it are fully accessible.
Fixes: 3ae872de4107 ("smb: client: fix shared DFS root mounts with different prefixes")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Gleb Korobeynikov <gkorobeynikov@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Date: Tue Jul 2 21:02:30 2024 +0200
clocksource/drivers/sh_cmt: Address race condition for clock events
[ Upstream commit db19d3aa77612983a02bd223b3f273f896b243cf ]
There is a race condition in the CMT interrupt handler. In the interrupt
handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This
flag is used to indicate any call to set_next_event() should not be
directly propagated to the device, but instead cached. This is done as
the interrupt handler itself reprograms the device when needed before it
completes and this avoids this operation to take place twice.
It is unclear why this design was chosen, my suspicion is to allow the
struct clock_event_device.event_handler callback, which is called while
the FLAG_IRQCONTEXT is set, can update the next event without having to
write to the device twice.
Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is
set and later cleared where the interrupt handler have already started to
write the next event to the device. If set_next_event() is called in
this window the value is only cached in the driver but not written. This
leads to the board to misbehave, or worse lockup and produce a splat.
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?)
rcu: (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2)
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tick_check_broadcast_expired+0xc/0x40
lr : cpu_idle_poll.isra.0+0x8c/0x168
sp : ffff800081c63d70
x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610
x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000
x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c
x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8
x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0
x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028
x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000
x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008
Call trace:
tick_check_broadcast_expired+0xc/0x40
do_idle+0x9c/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x11c
do_one_initcall+0x0/0x260
__primary_switched+0x80/0x88
rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=0 timer-softirq=262
rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 flags:0x00000008
Call trace:
__switch_to+0xbc/0x100
__schedule+0x358/0xbe0
schedule+0x48/0x148
schedule_timeout+0xc4/0x138
rcu_gp_fqs_loop+0x12c/0x764
rcu_gp_kthread+0x208/0x298
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
The design have been part of the driver since it was first merged in
early 2009. It becomes increasingly harder to trigger the issue the
older kernel version one tries. It only takes a few boots on v6.10-rc5,
while hundreds of boots are needed to trigger it on v5.10.
Close the race condition by using the CMT channel lock for the two
competing sections. The channel lock was added to the driver after its
initial design.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240702190230.3825292-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paul E. McKenney <paulmck@kernel.org>
Date: Fri Aug 2 08:46:15 2024 -0700
clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()
[ Upstream commit f2655ac2c06a15558e51ed6529de280e1553c86e ]
The current "nretries > 1 || nretries >= max_retries" check in
cs_watchdog_read() will always evaluate to true, and thus pr_warn(), if
nretries is greater than 1. The intent is instead to never warn on the
first try, but otherwise warn if the successful retry was the last retry.
Therefore, change that "||" to "&&".
Fixes: db3a34e17433 ("clocksource: Retry clock read if long delays detected")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240802154618.4149953-2-paulmck@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Feng Tang <feng.tang@intel.com>
Date: Wed Feb 21 14:08:59 2024 +0800
clocksource: Scale the watchdog read retries automatically
[ Upstream commit 2ed08e4bc53298db3f87b528cd804cb0cce066a9 ]
On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled
during boot time on about one out of 120 boot attempts:
clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns,
wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152)
clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896.
clocksource: Switched to clocksource hpet
The reason is that for platform with a large number of CPUs, there are
sporadic big or huge read latencies while reading the watchog/clocksource
during boot or when system is under stress work load, and the frequency and
maximum value of the latency goes up with the number of online CPUs.
The cCurrent code already has logic to detect and filter such high latency
case by reading the watchdog twice and checking the two deltas. Due to the
randomness of the latency, there is a low probabilty that the first delta
(latency) is big, but the second delta is small and looks valid. The
watchdog code retries the readouts by default twice, which is not
necessarily sufficient for systems with a large number of CPUs.
There is a command line parameter 'max_cswd_read_retries' which allows to
increase the number of retries, but that's not user friendly as it needs to
be tweaked per system. As the number of required retries is proportional to
the number of online CPUs, this parameter can be calculated at runtime.
Scale and enlarge the number of retries according to the number of online
CPUs and remove the command line parameter completely.
[ tglx: Massaged change log and comments ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jin Wang <jin1.wang@intel.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240221060859.1027450-1-feng.tang@intel.com
Stable-dep-of: f2655ac2c06a ("clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Williams <dan.j.williams@intel.com>
Date: Fri Jul 12 12:42:09 2024 -0700
driver core: Fix uevent_show() vs driver detach race
commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c upstream.
uevent_show() wants to de-reference dev->driver->name. There is no clean
way for a device attribute to de-reference dev->driver unless that
attribute is defined via (struct device_driver).dev_groups. Instead, the
anti-pattern of taking the device_lock() in the attribute handler risks
deadlocks with code paths that remove device attributes while holding
the lock.
This deadlock is typically invisible to lockdep given the device_lock()
is marked lockdep_set_novalidate_class(), but some subsystems allocate a
local lockdep key for @dev->mutex to reveal reports of the form:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7+ #275 Tainted: G OE N
------------------------------------------------------
modprobe/2374 is trying to acquire lock:
ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220
but task is already holding lock:
ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&cxl_root_key){+.+.}-{3:3}:
__mutex_lock+0x99/0xc30
uevent_show+0xac/0x130
dev_attr_show+0x18/0x40
sysfs_kf_seq_show+0xac/0xf0
seq_read_iter+0x110/0x450
vfs_read+0x25b/0x340
ksys_read+0x67/0xf0
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (kn->active#6){++++}-{0:0}:
__lock_acquire+0x121a/0x1fa0
lock_acquire+0xd6/0x2e0
kernfs_drain+0x1e9/0x200
__kernfs_remove+0xde/0x220
kernfs_remove_by_name_ns+0x5e/0xa0
device_del+0x168/0x410
device_unregister+0x13/0x60
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c7/0x210
driver_detach+0x47/0x90
bus_remove_driver+0x6c/0xf0
cxl_acpi_exit+0xc/0x11 [cxl_acpi]
__do_sys_delete_module.isra.0+0x181/0x260
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The observation though is that driver objects are typically much longer
lived than device objects. It is reasonable to perform lockless
de-reference of a @driver pointer even if it is racing detach from a
device. Given the infrequency of driver unregistration, use
synchronize_rcu() in module_remove_driver() to close any potential
races. It is potentially overkill to suffer synchronize_rcu() just to
handle the rare module removal racing uevent_show() event.
Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1].
Fixes: c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()")
Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1]
Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch
Cc: stable@vger.kernel.org
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jesse Zhang <jesse.zhang@amd.com>
Date: Thu May 9 10:57:04 2024 +0800
drm/admgpu: fix dereferencing null pointer context
[ Upstream commit 030ffd4d43b433bc6671d9ec34fc12c59220b95d ]
When user space sets an invalid ta type, the pointer context will be empty.
So it need to check the pointer context before using it
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Strauss <michael.strauss@amd.com>
Date: Tue Apr 9 12:00:34 2024 -0400
drm/amd/display: Add delay to improve LTTPR UHBR interop
[ Upstream commit 10839ee6a977ed1f7d0f4deb29f2d7e5d1f2a9dd ]
[WHY]
Avoid race condition which puts LTTPR into bad state during UHBR LT.
[HOW]
Delay 30ms between starting UHBR TPS1 PHY output and sending TPS1 via DPCD.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Date: Wed Jun 5 21:13:40 2024 +0530
drm/amd/display: Add NULL check for 'afb' before dereferencing in amdgpu_dm_plane_handle_cursor_update
[ Upstream commit 38e6f715b02b572f74677eb2f29d3b4bc6f1ddff ]
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Hung <alex.hung@amd.com>
Date: Tue Jun 4 16:33:18 2024 -0600
drm/amd/display: Add null checker before passing variables
[ Upstream commit 8092aa3ab8f7b737a34b71f91492c676a843043a ]
Checks null pointer before passing variables to functions.
This fixes 3 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fangzhi Zuo <Jerry.Zuo@amd.com>
Date: Fri Jul 12 16:30:03 2024 -0400
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
commit 50e376f1fe3bf571d0645ddf48ad37eb58323919 upstream.
[why]
Encounter NULL pointer dereference uner mst + dsc setup.
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2
Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224
RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280
RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850
R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000
R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224
FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? plist_add+0xbe/0x100
? exc_page_fault+0x7c/0x180
? asm_exc_page_fault+0x26/0x30
? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
drm_atomic_check_only+0x5c5/0xa40
drm_mode_atomic_ioctl+0x76e/0xbc0
[how]
dsc recompute should be skipped if no mode change detected on the new
request. If detected, keep checking whether the stream is already on
current state or not.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8151a6c13111b465dbabe07c19f572f7cbd16fef)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bob Zhou <bob.zhou@amd.com>
Date: Fri May 31 15:01:22 2024 +0800
drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr
[ Upstream commit 50151b7f1c79a09117837eb95b76c2de76841dab ]
Check return value and conduct null pointer handling to avoid null pointer dereference.
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Jun <Jun.Ma2@amd.com>
Date: Fri May 10 15:01:59 2024 +0800
drm/amdgpu/pm: Fix the null pointer dereference for smu7
[ Upstream commit c02c1960c93eede587576625a1221205a68a904f ]
optimize the code to avoid pass a null pointer (hwmgr->backend)
to function smu7_update_edc_leakage_table.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Jun <Jun.Ma2@amd.com>
Date: Thu May 9 15:51:35 2024 +0800
drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules
[ Upstream commit d19fb10085a49b77578314f69fff21562f7cd054 ]
Check the pointer value to fix potential null pointer
dereference
Acked-by: Yang Wang<kevinyang.wang@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Jun <Jun.Ma2@amd.com>
Date: Sun Apr 28 15:58:10 2024 +0800
drm/amdgpu/pm: Fix the param type of set_power_profile_mode
[ Upstream commit f683f24093dd94a831085fe0ea8e9dc4c6c1a2d1 ]
Function .set_power_profile_mode need an array as input
parameter. So define variable workload as an array to fix
the below coverity warning.
"Passing &workload to function hwmgr->hwmgr_func->set_power_profile_mode
which uses it as an array. This might corrupt or misinterpret adjacent
memory locations"
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Victor Skvortsov <victor.skvortsov@amd.com>
Date: Mon May 27 16:10:43 2024 -0400
drm/amdgpu: Add lock around VF RLCG interface
[ Upstream commit e864180ee49b4d30e640fd1e1d852b86411420c9 ]
flush_gpu_tlb may be called from another thread while
device_gpu_recover is running.
Both of these threads access registers through the VF
RLCG interface during VF Full Access. Add a lock around this interface
to prevent race conditions between these threads.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tim Huang <Tim.Huang@amd.com>
Date: Thu Apr 25 11:09:00 2024 +0800
drm/amdgpu: fix potential resource leak warning
[ Upstream commit 22a5daaec0660dd19740c4c6608b78f38760d1e6 ]
Clear resource leak warning that when the prepare fails,
the allocated amdgpu job object will never be released.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Jun <Jun.Ma2@amd.com>
Date: Sat May 11 15:48:02 2024 +0800
drm/amdgpu: Fix the null pointer dereference to ras_manager
[ Upstream commit 4c11d30c95576937c6c35e6f29884761f2dddb43 ]
Check ras_manager before using it
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joshua Ashton <joshua@froggi.es>
Date: Thu Mar 7 19:04:31 2024 +0000
drm/amdgpu: Forward soft recovery errors to userspace
commit 829798c789f567ef6ba4b084c15b7b5f3bd98d51 upstream.
As we discussed before[1], soft recovery should be
forwarded to userspace, or we can get into a really
bad state where apps will keep submitting hanging
command buffers cascading us to a hard reset.
1: https://lore.kernel.org/all/bf23d5ed-9a6b-43e7-84ee-8cbfd0d60f18@froggi.es/
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 434967aadbbbe3ad9103cc29e9a327de20fdba01)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lucas Stach <l.stach@pengutronix.de>
Date: Mon Mar 18 21:39:23 2024 +0100
drm/bridge: analogix_dp: properly handle zero sized AUX transactions
commit e82290a2e0e8ec5e836ecad1ca025021b3855c2d upstream.
Address only transactions without any data are valid and should not
be flagged as short transactions. Simply return the message size when
no transaction errors occured.
CC: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318203925.2837689-1-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Fri Aug 2 12:47:36 2024 +0800
drm/client: fix null pointer dereference in drm_client_modeset_probe
commit 113fd6372a5bb3689aba8ef5b8a265ed1529a78f upstream.
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is
assigned to modeset->mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes: cf13909aee05 ("drm/fb-helper: Move out modeset config code")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802044736.1570345-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wayne Lin <Wayne.Lin@amd.com>
Date: Wed Jun 26 16:48:24 2024 +0800
drm/dp_mst: Skip CSN if topology probing is not done yet
commit ddf983488c3e8d30d5c2e2b315ae7d9cd87096ed upstream.
[Why]
During resume, observe that we receive CSN event before we start topology
probing. Handling CSN at this moment based on uncertain topology is
unnecessary.
[How]
Add checking condition in drm_dp_mst_handle_up_req() to skip handling CSN
if the topology is yet to be probed.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-3-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andi Shyti <andi.shyti@linux.intel.com>
Date: Fri Aug 2 10:38:49 2024 +0200
drm/i915/gem: Adjust vma offset for framebuffer mmap offset
commit 1ac5167b3a90c9820daa64cc65e319b2d958d686 upstream.
When mapping a framebuffer object, the virtual memory area (VMA)
offset ('vm_pgoff') should be adjusted by the start of the
'vma_node' associated with the object. This ensures that the VMA
offset is correctly aligned with the corresponding offset within
the GGTT aperture.
Increment vm_pgoff by the start of the vma_node with the offset=
provided by the user.
Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
[Joonas: Add Cc: stable]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-2-andi.shyti@linux.intel.com
(cherry picked from commit 60a2066c50058086510c91f404eb582029650970)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andi Shyti <andi.shyti@linux.intel.com>
Date: Fri Aug 2 10:38:50 2024 +0200
drm/i915/gem: Fix Virtual Memory mapping boundaries calculation
commit 8bdd9ef7e9b1b2a73e394712b72b22055e0e26c3 upstream.
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
Fixes: c58305af1835 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass")
Reported-by: Jann Horn <jannh@google.com>
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
[Joonas: Add Requires: tag]
Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dragan Simic <dsimic@manjaro.org>
Date: Mon Jun 17 22:22:02 2024 +0200
drm/lima: Mark simple_ondemand governor as softdep
commit 0c94f58cef319ad054fd909b3bf4b7d09c03e11c upstream.
Lima DRM driver uses devfreq to perform DVFS, while using simple_ondemand
devfreq governor by default. This causes driver initialization to fail on
boot when simple_ondemand governor isn't built into the kernel statically,
as a result of the missing module dependency and, consequently, the
required governor module not being included in the initial ramdisk. Thus,
let's mark simple_ondemand governor as a softdep for Lima, to have its
kernel module included in the initial ramdisk.
This is a rather longstanding issue that has forced distributions to build
devfreq governors statically into their kernels, [1][2] or may have forced
some users to introduce unnecessary workarounds.
Having simple_ondemand marked as a softdep for Lima may not resolve this
issue for all Linux distributions. In particular, it will remain
unresolved for the distributions whose utilities for the initial ramdisk
generation do not handle the available softdep information [3] properly
yet. However, some Linux distributions already handle softdeps properly
while generating their initial ramdisks, [4] and this is a prerequisite
step in the right direction for the distributions that don't handle them
properly yet.
[1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux-pinephone/-/blob/6.7-megi/config?ref_type=heads#L5749
[2] https://gitlab.com/postmarketOS/pmaports/-/blob/7f64e287e7732c9eaa029653e73ca3d4ba1c8598/main/linux-postmarketos-allwinner/config-postmarketos-allwinner.aarch64#L4654
[3] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d
[4] https://github.com/archlinux/mkinitcpio/commit/97ac4d37aae084a050be512f6d8f4489054668ad
Cc: Philip Muller <philm@manjaro.org>
Cc: Oliver Smith <ollieparanoid@postmarketos.org>
Cc: Daniel Smith <danct12@disroot.org>
Cc: stable@vger.kernel.org
Fixes: 1996970773a3 ("drm/lima: Add optional devfreq and cooling device support")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdaf2e41bb6a0c5118ff9cc21f4f62583208d885.1718655070.git.dsimic@manjaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Zimmermann <tzimmermann@suse.de>
Date: Mon May 13 14:51:07 2024 +0200
drm/mgag200: Bind I2C lifetime to DRM device
commit eb1ae34e48a09b7a1179c579aed042b032e408f4 upstream.
Managed cleanup with devm_add_action_or_reset() will release the I2C
adapter when the underlying Linux device goes away. But the connector
still refers to it, so this cleanup leaves behind a stale pointer
in struct drm_connector.ddc.
Bind the lifetime of the I2C adapter to the connector's lifetime by
using DRM's managed release. When the DRM device goes away (after
the Linux device) DRM will first clean up the connector and then
clean up the I2C adapter.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: b279df242972 ("drm/mgag200: Switch I2C code to managed cleanup")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.0+
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-3-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Zimmermann <tzimmermann@suse.de>
Date: Mon May 13 14:51:06 2024 +0200
drm/mgag200: Set DDC timeout in milliseconds
commit ecde5db1598aecab54cc392282c15114f526f05f upstream.
Compute the i2c timeout in jiffies from a value in milliseconds. The
original values of 2 jiffies equals 2 milliseconds if HZ has been
configured to a value of 1000. This corresponds to 2.2 milliseconds
used by most other DRM drivers. Update mgag200 accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 414c45310625 ("mgag200: initial g200se driver (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bill Wendling <morbo@google.com>
Date: Wed May 29 14:54:44 2024 -0700
drm/radeon: Remove __counted_by from StateArray.states[]
commit 2bac084468847cfe5bbc7166082b2a208514bb1c upstream.
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
states member of 'struct _StateArray' triggers this restriction,
resulting in:
drivers/gpu/drm/radeon/pptable.h:442:5: error: 'counted_by' should not be applied to an array with element of unknown size because 'ATOM_PPLIB_STATE_V2' (aka 'struct _ATOM_PPLIB_STATE_V2') is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
442 | ATOM_PPLIB_STATE_V2 states[] __counted_by(ucNumEntries);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2028
Fixes: efade6fe50e7 ("drm/radeon: silence UBSAN warning (v3)")
Signed-off-by: Bill Wendling <morbo@google.com>
Co-developed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mathias Krause <minipli@grsecurity.net>
Date: Tue Jul 23 14:25:21 2024 +0200
eventfs: Don't return NULL in eventfs_create_dir()
commit 12c20c65d0460cf34f9a665d8f0c0d77d45a3829 upstream.
Commit 77a06c33a22d ("eventfs: Test for ei->is_freed when accessing
ei->dentry") added another check, testing if the parent was freed after
we released the mutex. If so, the function returns NULL. However, all
callers expect it to either return a valid pointer or an error pointer,
at least since commit 5264a2f4bb3b ("tracing: Fix a NULL vs IS_ERR() bug
in event_subsystem_dir()"). Returning NULL will therefore fail the error
condition check in the caller.
Fix this by substituting the NULL return value with a fitting error
pointer.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Fixes: 77a06c33a22d ("eventfs: Test for ei->is_freed when accessing ei->dentry")
Link: https://lore.kernel.org/20240723122522.2724-1-minipli@grsecurity.net
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mathias Krause <minipli@grsecurity.net>
Date: Tue Jul 23 23:07:53 2024 +0200
eventfs: Use SRCU for freeing eventfs_inodes
commit 8e556432477e97ad6179c61b61a32bf5f1af2355 upstream.
To mirror the SRCU lock held in eventfs_iterate() when iterating over
eventfs inodes, use call_srcu() to free them too.
This was accidentally(?) degraded to RCU in commit 43aa6f97c2d0
("eventfs: Get rid of dentry pointers without refcounts").
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20240723210755.8970-1-minipli@grsecurity.net
Fixes: 43aa6f97c2d0 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xiaxi Shen <shenxiaxi26@gmail.com>
Date: Tue Apr 30 20:30:17 2024 -0700
ext4: fix uninitialized variable in ext4_inlinedir_to_tree
[ Upstream commit 8dc9c3da79c84b13fdb135e2fb0a149a8175bffe ]
Syzbot has found an uninit-value bug in ext4_inlinedir_to_tree
This error happens because ext4_inlinedir_to_tree does not
handle the case when ext4fs_dirhash returns an error
This can be avoided by checking the return value of ext4fs_dirhash
and propagating the error,
similar to how it's done with ext4_htree_store_dirent
Signed-off-by: Xiaxi Shen <shenxiaxi26@gmail.com>
Reported-and-tested-by: syzbot+eaba5abe296837a640c0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=eaba5abe296837a640c0
Link: https://patch.msgid.link/20240501033017.220000-1-shenxiaxi26@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shay Drory <shayd@nvidia.com>
Date: Tue Aug 6 10:20:44 2024 +0300
genirq/irqdesc: Honor caller provided affinity in alloc_desc()
commit edbbaae42a56f9a2b39c52ef2504dfb3fb0a7858 upstream.
Currently, whenever a caller is providing an affinity hint for an
interrupt, the allocation code uses it to calculate the node and copies the
cpumask into irq_desc::affinity.
If the affinity for the interrupt is not marked 'managed' then the startup
of the interrupt ignores irq_desc::affinity and uses the system default
affinity mask.
Prevent this by setting the IRQD_AFFINITY_SET flag for the interrupt in the
allocator, which causes irq_setup_affinity() to use irq_desc::affinity on
interrupt startup if the mask contains an online CPU.
[ tglx: Massaged changelog ]
Fixes: 45ddcecbfa94 ("genirq: Use affinity hint in irqdesc allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20240806072044.837827-1-shayd@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hagar Hemdan <hagarhem@amazon.com>
Date: Thu May 23 08:53:32 2024 +0000
gpio: prevent potential speculation leaks in gpio_device_get_desc()
[ Upstream commit d795848ecce24a75dfd46481aee066ae6fe39775 ]
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240523085332.1801-1-hagarhem@amazon.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Date: Fri May 24 04:38:11 2024 +0000
hwmon: corsair-psu: add USB id of HX1200i Series 2023 psu
[ Upstream commit b9c15c96ccb47ad860af2e075c5f3c90c4cd1730 ]
Add the usb id of the HX1200i Series 2023. Update the documentation
accordingly. Also fix the version comments, there are no Series 2022
products. That are legacy or first version products going back many
many years.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZlAZs4u0dU7JxtDf@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gaosheng Cui <cuigaosheng1@huawei.com>
Date: Sat Aug 3 14:10:41 2024 +0800
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
[ Upstream commit b93d16bee557302d4e588375ececd833cc048acc ]
Add the missing clk_disable_unprepare() before return in
geni_i2c_runtime_resume().
Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gaosheng Cui <cuigaosheng1@huawei.com>
Date: Tue Aug 6 20:53:31 2024 +0800
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
[ Upstream commit 9ba48db9f77ce0001dbb882476fa46e092feb695 ]
Add the missing geni_icc_disable() before return in
geni_i2c_runtime_resume().
Fixes: bf225ed357c6 ("i2c: i2c-qcom-geni: Add interconnect support")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guenter Roeck <linux@roeck-us.net>
Date: Mon Jan 10 09:28:56 2022 -0800
i2c: smbus: Improve handling of stuck alerts
[ Upstream commit 37c526f00bc1c4f847fc800085f8f009d2e11be6 ]
The following messages were observed while testing alert functionality
on systems with multiple I2C devices on a single bus if alert was active
on more than one chip.
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
and:
smbus_alert 3-000c: SMBALERT# from dev 0x28, flag 0
Once it starts, this message repeats forever at high rate. There is no
device at any of the reported addresses.
Analysis shows that this is seen if multiple devices have the alert pin
active. Apparently some devices do not support SMBus arbitration correctly.
They keep sending address bits after detecting an address collision and
handle the collision not at all or too late.
Specifically, address 0x0c is seen with ADT7461A at address 0x4c and
ADM1021 at address 0x18 if alert is active on both chips. Address 0x28 is
seen with ADT7483 at address 0x2a and ADT7461 at address 0x4c if alert is
active on both chips.
Once the system is in bad state (alert is set by more than one chip),
it often only recovers by power cycling.
To reduce the impact of this problem, abort the endless loop in
smbus_alert() if the same address is read more than once and not
handled by a driver.
Fixes: b5527a7766f0 ("i2c: Add SMBus alert support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: it also fixed an interrupt storm in one of my experiments]
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[wsa: rebased, moved a comment as well, improved the 'invalid' value]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guenter Roeck <linux@roeck-us.net>
Date: Tue Jul 30 07:19:41 2024 -0700
i2c: smbus: Send alert notifications to all devices if source not found
[ Upstream commit f6c29f710c1ff2590109f83be3e212b86c01e0f3 ]
If a SMBus alert is received and the originating device is not found,
the reason may be that the address reported on the SMBus alert address
is corrupted, for example because multiple devices asserted alert and
do not correctly implement SMBus arbitration.
If this happens, call alert handlers on all devices connected to the
given I2C bus, in the hope that this cleans up the situation.
This change reliably fixed the problem on a system with multiple devices
on a single bus. Example log where the device on address 0x18 (ADM1021)
and on address 0x4c (ADT7461A) both had the alert line asserted:
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
lm90 3-0018: temp1 out of range, please check!
lm90 3-0018: Disabling ALERT#
lm90 3-0029: Everything OK
lm90 3-002a: Everything OK
lm90 3-004c: temp1 out of range, please check!
lm90 3-004c: temp2 out of range, please check!
lm90 3-004c: Disabling ALERT#
Fixes: b5527a7766f0 ("i2c: Add SMBus alert support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: fixed a typo in the commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Grzegorz Nitka <grzegorz.nitka@intel.com>
Date: Mon Jul 15 17:39:10 2024 +0200
ice: Fix reset handler
[ Upstream commit 25a7123579ecac9a89a7e5b8d8a580bee4b68acd ]
Synchronize OICR IRQ when preparing for reset to avoid potential
race conditions between the reset procedure and OICR
Fixes: 4aad5335969f ("ice: add individual interrupt allocation")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Wed Jul 10 10:14:28 2024 +0200
ipv6: fix source address selection with route leak
commit 252442f2ae317d109ef0b4b39ce0608c09563042 upstream.
By default, an address assigned to the output interface is selected when
the source address is not specified. This is problematic when a route,
configured in a vrf, uses an interface from another vrf (aka route leak).
The original vrf does not own the selected source address.
Let's add a check against the output interface and call the appropriate
function to select the source address.
CC: stable@vger.kernel.org
Fixes: 0d240e7811c4 ("net: vrf: Implement get_saddr for IPv6")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20240710081521.3809742-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Tue Jul 23 14:45:08 2024 +0800
irqchip/loongarch-cpu: Fix return value of lpic_gsi_to_irq()
commit 81a91abab1307d7725fa4620952c0767beae7753 upstream.
lpic_gsi_to_irq() should return a valid Linux interrupt number if
acpi_register_gsi() succeeds, and return 0 otherwise. But lpic_gsi_to_irq()
converts a negative return value of acpi_register_gsi() to a positive value
silently.
Convert the return value explicitly.
Fixes: e8bba72b396c ("irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch")
Reported-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240723064508.35560-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yipeng Zou <zouyipeng@huawei.com>
Date: Tue Jul 30 09:44:00 2024 +0800
irqchip/mbigen: Fix mbigen node address layout
[ Upstream commit 6be6cba9c4371d27f78d900ccfe34bb880d9ee20 ]
The mbigen interrupt chip has its per node registers located in a
contiguous region of page sized chunks. The code maps them into virtual
address space as a contiguous region and determines the address of a node
by using the node ID as index.
mbigen chip
|-----------------|------------|--------------|
mgn_node_0 mgn_node_1 ... mgn_node_i
|--------------| |--------------| |----------------------|
[0x0000, 0x0x0FFF] [0x1000, 0x1FFF] [i*0x1000, (i+1)*0x1000 - 1]
This works correctly up to 10 nodes, but then fails because the 11th's
array slot is used for the MGN_CLEAR registers.
mbigen chip
|-----------|--------|--------|---------------|--------|
mgn_node_0 mgn_node_1 ... mgn_clear_register ... mgn_node_i
|-----------------|
[0xA000, 0xAFFF]
Skip the MGN_CLEAR register space when calculating the offset for node IDs
greater than or equal to ten.
Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240730014400.1751530-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arseniy Krasnov <avkrasnov@salutedevices.com>
Date: Mon Jul 29 16:18:50 2024 +0300
irqchip/meson-gpio: Convert meson_gpio_irq_controller::lock to 'raw_spinlock_t'
commit f872d4af79fe8c71ae291ce8875b477e1669a6c7 upstream.
This lock is acquired under irq_desc::lock with interrupts disabled.
When PREEMPT_RT is enabled, 'spinlock_t' becomes preemptible, which results
in invalid lock acquire context;
[ BUG: Invalid wait context ]
swapper/0/1 is trying to lock:
ffff0000008fed30 (&ctl->lock){....}-{3:3}, at: meson_gpio_irq_update_bits0
other info that might help us debug this:
context-{5:5}
3 locks held by swapper/0/1:
#0: ffff0000003cd0f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0x90c
#1: ffff000004714650 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq0
#2: ffff0000047144c8 (&irq_desc_lock_class){-.-.}-{2:2}, at: __setup_irq0
stack backtrace:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.9-sdkernel #1
Call trace:
_raw_spin_lock_irqsave+0x60/0x88
meson_gpio_irq_update_bits+0x34/0x70
meson8_gpio_irq_set_type+0x78/0xc4
meson_gpio_irq_set_type+0x30/0x60
__irq_set_trigger+0x60/0x180
__setup_irq+0x30c/0x6e0
request_threaded_irq+0xec/0x1a4
Fixes: 215f4cc0fb20 ("irqchip/meson: Add support for gpio interrupt controller")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240729131850.3015508-1-avkrasnov@salutedevices.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Date: Fri Aug 9 12:32:24 2024 +0530
irqchip/xilinx: Fix shift out of bounds
commit d73f0f49daa84176c3beee1606e73c7ffb6af8b2 upstream.
The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.
The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.
The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:
UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'
Fix it by promoting the mask to u64 for the test.
Fixes: d50466c90724 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kemeng Shi <shikemeng@huaweicloud.com>
Date: Tue May 14 19:24:30 2024 +0800
jbd2: avoid memleak in jbd2_journal_write_metadata_buffer
[ Upstream commit cc102aa24638b90e04364d64e4f58a1fa91a1976 ]
The new_bh is from alloc_buffer_head, we should call free_buffer_head to
free it in error case.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Zijlstra <peterz@infradead.org>
Date: Wed Jul 31 12:43:21 2024 +0200
jump_label: Fix the fix, brown paper bags galore
[ Upstream commit 224fa3552029a3d14bec7acf72ded8171d551b88 ]
Per the example of:
!atomic_cmpxchg(&key->enabled, 0, 1)
the inverse was written as:
atomic_cmpxchg(&key->enabled, 1, 0)
except of course, that while !old is only true for old == 0, old is
true for everything except old == 0.
Fix it to read:
atomic_cmpxchg(&key->enabled, 1, 0) == 1
such that only the 1->0 transition returns true and goes on to disable
the keys.
Fixes: 83ab38ef0a0b ("jump_label: Fix concurrency issues in static_key_slow_dec()")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lkml.kernel.org/r/20240731105557.GY33588@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrey Konovalov <andreyknvl@gmail.com>
Date: Mon Jul 29 04:21:58 2024 +0200
kcov: properly check for softirq context
commit 7d4df2dad312f270d62fecb0e5c8b086c6d7dcfc upstream.
When collecting coverage from softirqs, KCOV uses in_serving_softirq() to
check whether the code is running in the softirq context. Unfortunately,
in_serving_softirq() is > 0 even when the code is running in the hardirq
or NMI context for hardirqs and NMIs that happened during a softirq.
As a result, if a softirq handler contains a remote coverage collection
section and a hardirq with another remote coverage collection section
happens during handling the softirq, KCOV incorrectly detects a nested
softirq coverate collection section and prints a WARNING, as reported by
syzbot.
This issue was exposed by commit a7f3813e589f ("usb: gadget: dummy_hcd:
Switch to hrtimer transfer scheduler"), which switched dummy_hcd to using
hrtimer and made the timer's callback be executed in the hardirq context.
Change the related checks in KCOV to account for this behavior of
in_serving_softirq() and make KCOV ignore remote coverage collection
sections in the hardirq and NMI contexts.
This prevents the WARNING printed by syzbot but does not fix the inability
of KCOV to collect coverage from the __usb_hcd_giveback_urb when dummy_hcd
is in use (caused by a7f3813e589f); a separate patch is required for that.
Link: https://lkml.kernel.org/r/20240729022158.92059-1-andrey.konovalov@linux.dev
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: syzbot+2388cdaeb6b10f0c13ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2388cdaeb6b10f0c13ac
Acked-by: Marco Elver <elver@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Date: Fri Aug 2 22:53:15 2024 +0900
kprobes: Fix to check symbol prefixes correctly
[ Upstream commit 8c8acb8f26cbde665b233dd1b9bbcbb9b86822dc ]
Since str_has_prefix() takes the prefix as the 2nd argument and the string
as the first, is_cfi_preamble_symbol() always fails to check the prefix.
Fix the function parameter order so that it correctly check the prefix.
Link: https://lore.kernel.org/all/172260679559.362040.7360872132937227206.stgit@devnote2/
Fixes: de02f2ac5d8c ("kprobes: Prohibit probing on CFI preamble symbol")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: James Chapman <jchapman@katalix.com>
Date: Tue Aug 6 17:06:26 2024 +0100
l2tp: fix lockdep splat
[ Upstream commit 86a41ea9fd79ddb6145cb8ebf5aeafceabca6f7d ]
When l2tp tunnels use a socket provided by userspace, we can hit
lockdep splats like the below when data is transmitted through another
(unrelated) userspace socket which then gets routed over l2tp.
This issue was previously discussed here:
https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/
The solution is to have lockdep treat socket locks of l2tp tunnel
sockets separately than those of standard INET sockets. To do so, use
a different lockdep subclass where lock nesting is possible.
============================================
WARNING: possible recursive locking detected
6.10.0+ #34 Not tainted
--------------------------------------------
iperf3/771 is trying to acquire lock:
ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0
but task is already holding lock:
ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(slock-AF_INET/1);
lock(slock-AF_INET/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
10 locks held by iperf3/771:
#0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40
#1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0
#2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130
#3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0
#4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260
#5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10
#6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0
#7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130
#8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450
#9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450
stack backtrace:
CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x69/0xa0
dump_stack+0xc/0x20
__lock_acquire+0x135d/0x2600
? srso_alias_return_thunk+0x5/0xfbef5
lock_acquire+0xc4/0x2a0
? l2tp_xmit_skb+0x243/0x9d0
? __skb_checksum+0xa3/0x540
_raw_spin_lock_nested+0x35/0x50
? l2tp_xmit_skb+0x243/0x9d0
l2tp_xmit_skb+0x243/0x9d0
l2tp_eth_dev_xmit+0x3c/0xc0
dev_hard_start_xmit+0x11e/0x420
sch_direct_xmit+0xc3/0x640
__dev_queue_xmit+0x61c/0x1450
? ip_finish_output2+0xf4c/0x1130
ip_finish_output2+0x6b6/0x1130
? srso_alias_return_thunk+0x5/0xfbef5
? __ip_finish_output+0x217/0x380
? srso_alias_return_thunk+0x5/0xfbef5
__ip_finish_output+0x217/0x380
ip_output+0x99/0x120
__ip_queue_xmit+0xae4/0xbc0
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? tcp_options_write.constprop.0+0xcb/0x3e0
ip_queue_xmit+0x34/0x40
__tcp_transmit_skb+0x1625/0x1890
__tcp_send_ack+0x1b8/0x340
tcp_send_ack+0x23/0x30
__tcp_ack_snd_check+0xa8/0x530
? srso_alias_return_thunk+0x5/0xfbef5
tcp_rcv_established+0x412/0xd70
tcp_v4_do_rcv+0x299/0x420
tcp_v4_rcv+0x1991/0x1e10
ip_protocol_deliver_rcu+0x50/0x220
ip_local_deliver_finish+0x158/0x260
ip_local_deliver+0xc8/0xe0
ip_rcv+0xe5/0x1d0
? __pfx_ip_rcv+0x10/0x10
__netif_receive_skb_one_core+0xce/0xe0
? process_backlog+0x28b/0x9f0
__netif_receive_skb+0x34/0xd0
? process_backlog+0x28b/0x9f0
process_backlog+0x2cb/0x9f0
__napi_poll.constprop.0+0x61/0x280
net_rx_action+0x332/0x670
? srso_alias_return_thunk+0x5/0xfbef5
? find_held_lock+0x2b/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
handle_softirqs+0xda/0x480
? __dev_queue_xmit+0xa2c/0x1450
do_softirq+0xa1/0xd0
</IRQ>
<TASK>
__local_bh_enable_ip+0xc8/0xe0
? __dev_queue_xmit+0xa2c/0x1450
__dev_queue_xmit+0xa48/0x1450
? ip_finish_output2+0xf4c/0x1130
ip_finish_output2+0x6b6/0x1130
? srso_alias_return_thunk+0x5/0xfbef5
? __ip_finish_output+0x217/0x380
? srso_alias_return_thunk+0x5/0xfbef5
__ip_finish_output+0x217/0x380
ip_output+0x99/0x120
__ip_queue_xmit+0xae4/0xbc0
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? tcp_options_write.constprop.0+0xcb/0x3e0
ip_queue_xmit+0x34/0x40
__tcp_transmit_skb+0x1625/0x1890
tcp_write_xmit+0x766/0x2fb0
? __entry_text_end+0x102ba9/0x102bad
? srso_alias_return_thunk+0x5/0xfbef5
? __might_fault+0x74/0xc0
? srso_alias_return_thunk+0x5/0xfbef5
__tcp_push_pending_frames+0x56/0x190
tcp_push+0x117/0x310
tcp_sendmsg_locked+0x14c1/0x1740
tcp_sendmsg+0x28/0x40
inet_sendmsg+0x5d/0x90
sock_write_iter+0x242/0x2b0
vfs_write+0x68d/0x800
? __pfx_sock_write_iter+0x10/0x10
ksys_write+0xc8/0xf0
__x64_sys_write+0x3d/0x50
x64_sys_call+0xfaf/0x1f50
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f4d143af992
Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0
RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992
RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005
RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc
R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0
</TASK>
Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4
CC: gnault@redhat.com
CC: cong.wang@bytedance.com
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Wed Aug 14 13:59:04 2024 +0200
Linux 6.6.46
Link: https://lore.kernel.org/r/20240812160132.135168257@linuxfoundation.org
Tested-by: ChromeOS CQ Test <chromeos-kernel-stable-merge@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miao Wang <shankerwangmiao@gmail.com>
Date: Wed Aug 7 17:37:11 2024 +0800
LoongArch: Enable general EFI poweroff method
commit e688c220732e518c2eb1639e9ef77d4a9311713c upstream.
efi_shutdown_init() can register a general sys_off handler named
efi_power_off(). Enable this by providing efi_poweroff_required(),
like arm and x86. Since EFI poweroff is also supported on LoongArch,
and the enablement makes the poweroff function usable for hardwares
which lack ACPI S5.
We prefer ACPI poweroff rather than EFI poweroff (like x86), so we only
require EFI poweroff if acpi_gbl_reduced_hardware or acpi_no_s5 is true.
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Tue Jun 11 21:22:51 2024 +0800
md/raid5: avoid BUG_ON() while continue reshape after reassembling
[ Upstream commit 305a5170dc5cf3d395bb4c4e9239bca6d0b54b49 ]
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Nan <linan122@huawei.com>
Date: Wed May 8 17:20:53 2024 +0800
md: do not delete safemode_timer in mddev_suspend
[ Upstream commit a8768a134518e406d41799a3594aeb74e0889cf7 ]
The deletion of safemode_timer in mddev_suspend() is redundant and
potentially harmful now. If timer is about to be woken up but gets
deleted, 'in_sync' will remain 0 until the next write, causing array
to stay in the 'active' state instead of transitioning to 'clean'.
Commit 0d9f4f135eb6 ("MD: Add del_timer_sync to mddev_suspend (fix
nasty panic))" introduced this deletion for dm, because if timer fired
after dm is destroyed, the resource which the timer depends on might
have been freed.
However, commit 0dd84b319352 ("md: call __md_stop_writes in md_stop")
added __md_stop_writes() to md_stop(), which is called before freeing
resource. Timer is deleted in __md_stop_writes(), and the origin issue
is resolved. Therefore, delete safemode_timer can be removed safely now.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240508092053.1447930-1-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ming Qian <ming.qian@nxp.com>
Date: Mon May 6 17:49:17 2024 +0900
media: amphion: Remove lock in s_ctrl callback
[ Upstream commit 065927b51eb1f042c3e026cebfd55e72ccc26093 ]
There is no need to add a lock in s_ctrl callback, it has been
synchronized by the ctrl_handler's lock, otherwise it may led to
a deadlock if the driver calls v4l2_ctrl_s_ctrl().
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Pecio <michal.pecio@gmail.com>
Date: Sun Apr 14 19:00:40 2024 +0200
media: uvcvideo: Fix the bandwdith quirk on USB 3.x
[ Upstream commit 9e3d55fbd160b3ca376599a68b4cddfdc67d4153 ]
The bandwidth fixup quirk doesn't know that SuperSpeed exists and has
the same 8 service intervals per millisecond as High Speed, hence its
calculations are wrong.
Assume that all speeds from HS up use 8 intervals per millisecond.
No further changes are needed, updated code has been confirmed to work
with all speeds from FS to SS.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240414190040.2255a0bc@foxbook
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ricardo Ribalda <ribalda@chromium.org>
Date: Sat Mar 23 10:48:03 2024 +0000
media: uvcvideo: Ignore empty TS packets
[ Upstream commit 5cd7c25f6f0576073b3d03bc4cfb1e8ca63a1195 ]
Some SunplusIT cameras took a borderline interpretation of the UVC 1.5
standard, and fill the PTS and SCR fields with invalid data if the
package does not contain data.
"STC must be captured when the first video data of a video frame is put
on the USB bus."
Some SunplusIT devices send, e.g.,
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a
While the UVC specification meant that the first two packets shouldn't
have had the SCR bit set in the header.
This borderline/buggy interpretation has been implemented in a variety
of devices, from directly SunplusIT and from other OEMs that rebrand
SunplusIT products. So quirking based on VID:PID will be problematic.
All the affected modules have the following extension unit:
VideoControl Interface Descriptor:
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d}
But the vendor plans to use that GUID in the future and fix the bug,
this means that we should use heuristic to figure out the broken
packets.
This patch takes care of this.
lsusb of one of the affected cameras:
Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1bcf Sunplus Innovation Technology Inc.
idProduct 0x2a01
bcdDevice 0.02
iManufacturer 1 SunplusIT Inc
iProduct 2 HanChen Wise Camera
iSerial 3 01.00.00
bNumConfigurations 1
Tested-by: HungNien Chen <hn.chen@sunplusit.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-2-b08e590d97c7@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chi Zhiling <chizhiling@kylinos.cn>
Date: Fri Jun 14 08:22:25 2024 -0700
media: xc2028: avoid use-after-free in load_firmware_cb()
[ Upstream commit 68594cec291ff9523b9feb3f43fd853dcddd1f60 ]
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tuner_remove <= free dvb_frontend
...
request_firmware_work_func <= the firmware is ready
load_firmware_cb <= but now the dvb_frontend has been freed
To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is
null, report a warning and just return.
[1]:
==================================================================
BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0
Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504
Call trace:
load_firmware_cb+0x1310/0x17a0
request_firmware_work_func+0x128/0x220
process_one_work+0x770/0x1824
worker_thread+0x488/0xea0
kthread+0x300/0x430
ret_from_fork+0x10/0x20
Allocated by task 6504:
kzalloc
tuner_probe+0xb0/0x1430
i2c_device_probe+0x92c/0xaf0
really_probe+0x678/0xcd0
driver_probe_device+0x280/0x370
__device_attach_driver+0x220/0x330
bus_for_each_drv+0x134/0x1c0
__device_attach+0x1f4/0x410
device_initial_probe+0x20/0x30
bus_probe_device+0x184/0x200
device_add+0x924/0x12c0
device_register+0x24/0x30
i2c_new_device+0x4e0/0xc44
v4l2_i2c_new_subdev_board+0xbc/0x290
v4l2_i2c_new_subdev+0xc8/0x104
em28xx_v4l2_init+0x1dd0/0x3770
Freed by task 6504:
kfree+0x238/0x4e4
tuner_remove+0x144/0x1c0
i2c_device_remove+0xc8/0x290
__device_release_driver+0x314/0x5fc
device_release_driver+0x30/0x44
bus_remove_device+0x244/0x490
device_del+0x350/0x900
device_unregister+0x28/0xd0
i2c_unregister_device+0x174/0x1d0
v4l2_device_unregister+0x224/0x380
em28xx_v4l2_init+0x1d90/0x3770
The buggy address belongs to the object at ffff8000d7ca2000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 776 bytes inside of
2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)
The buggy address belongs to the page:
page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0
flags: 0x7ff800000000100(slab)
raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[2]
Actually, it is allocated for struct tuner, and dvb_frontend is inside.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shakeel Butt <shakeel.butt@linux.dev>
Date: Fri Aug 2 16:58:22 2024 -0700
memcg: protect concurrent access to mem_cgroup_idr
commit 9972605a238339b85bd16b084eed5f18414d22db upstream.
Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.
We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.
Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one.
Link: https://lkml.kernel.org/r/20240802235822.1830976-1-shakeel.butt@linux.dev
Fixes: 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miaohe Lin <linmiaohe@huawei.com>
Date: Mon Jul 8 10:51:27 2024 +0800
mm/hugetlb: fix potential race in __update_and_free_hugetlb_folio()
commit 5596d9e8b553dacb0ac34bcf873cbbfb16c3ba3e upstream.
There is a potential race between __update_and_free_hugetlb_folio() and
try_memory_failure_hugetlb():
CPU1 CPU2
__update_and_free_hugetlb_folio try_memory_failure_hugetlb
folio_test_hugetlb
-- It's still hugetlb folio.
folio_clear_hugetlb_hwpoison
spin_lock_irq(&hugetlb_lock);
__get_huge_page_for_hwpoison
folio_set_hugetlb_hwpoison
spin_unlock_irq(&hugetlb_lock);
spin_lock_irq(&hugetlb_lock);
__folio_clear_hugetlb(folio);
-- Hugetlb flag is cleared but too late.
spin_unlock_irq(&hugetlb_lock);
When the above race occurs, raw error page info will be leaked. Even
worse, raw error pages won't have hwpoisoned flag set and hit
pcplists/buddy. Fix this issue by deferring
folio_clear_hugetlb_hwpoison() until __folio_clear_hugetlb() is done. So
all raw error pages will have hwpoisoned flag set.
Link: https://lkml.kernel.org/r/20240708025127.107713-1-linmiaohe@huawei.com
Fixes: 32c877191e02 ("hugetlb: do not clear hugetlb dtor until allocating vmemmap")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Shi <yang@os.amperecomputing.com>
Date: Thu Jan 18 10:05:05 2024 -0800
mm: huge_memory: don't force huge page alignment on 32 bit
commit 4ef9ad19e17676b9ef071309bc62020e2373705d upstream.
commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries") caused two issues [1] [2] reported on 32 bit system or compat
userspace.
It doesn't make too much sense to force huge page alignment on 32 bit
system due to the constrained virtual address space.
[1] https://lore.kernel.org/linux-mm/d0a136a0-4a31-46bc-adf4-2db109a61672@kernel.org/
[2] https://lore.kernel.org/linux-mm/CAJuCfpHXLdQy1a2B6xN2d7quTYwg2OoZseYPZTRpU0eHHKD-sQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240118180505.2914778-1-shy828301@gmail.com
Fixes: efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Christopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Shi <yang@os.amperecomputing.com>
Date: Fri Jul 12 08:58:55 2024 -0700
mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
commit d9592025000b3cf26c742f3505da7b83aedc26d5 upstream.
Yves-Alexis Perez reported commit 4ef9ad19e176 ("mm: huge_memory: don't
force huge page alignment on 32 bit") didn't work for x86_32 [1]. It is
because x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT.
!CONFIG_64BIT should cover all 32 bit machines.
[1] https://lore.kernel.org/linux-mm/CAHbLzkr1LwH3pcTgM+aGQ31ip2bKqiqEQ8=FQB+t2c3dhNKNHA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240712155855.1130330-1-yang@os.amperecomputing.com
Fixes: 4ef9ad19e176 ("mm: huge_memory: don't force huge page alignment on 32 bit")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Yves-Alexis Perez <corsac@debian.org>
Tested-by: Yves-Alexis Perez <corsac@debian.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [6.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri Aug 9 08:33:28 2024 -0700
module: make waiting for a concurrent module loader interruptible
[ Upstream commit 2124d84db293ba164059077944e6b429ba530495 ]
The recursive aes-arm-bs module load situation reported by Russell King
is getting fixed in the crypto layer, but this in the meantime fixes the
"recursive load hangs forever" by just making the waiting for the first
module load be interruptible.
This should now match the old behavior before commit 9b9879fc0327
("modules: catch concurrent module loads, treat them as idempotent"),
which used the different "wait for module to be ready" code in
module_patient_check_exists().
End result: a recursive module load will still block, but now a signal
will interrupt it and fail the second module load, at which point the
first module will successfully complete loading.
Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent")
Cc: Russell King <linux@armlinux.org.uk>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu Aug 8 12:29:40 2024 -0700
module: warn about excessively long module waits
[ Upstream commit cb5b81bc9a448f8db817566f60f92e2ea788ea0f ]
Russell King reported that the arm cbc(aes) crypto module hangs when
loaded, and Herbert Xu bisected it to commit 9b9879fc0327 ("modules:
catch concurrent module loads, treat them as idempotent"), and noted:
"So what's happening here is that the first modprobe tries to load a
fallback CBC implementation, in doing so it triggers a load of the
exact same module due to module aliases.
IOW we're loading aes-arm-bs which provides cbc(aes). However, this
needs a fallback of cbc(aes) to operate, which is made out of the
generic cbc module + any implementation of aes, or ecb(aes). The
latter happens to also be provided by aes-arm-cb so that's why it
tries to load the same module again"
So loading the aes-arm-bs module ends up wanting to recursively load
itself, and the recursive load then ends up waiting for the original
module load to complete.
This is a regression, in that it used to be that we just tried to load
the module multiple times, and then as we went on to install it the
second time we would instead just error out because the module name
already existed.
That is actually also exactly what the original "catch concurrent loads"
patch did in commit 9828ed3f695a ("module: error out early on concurrent
load of the same module file"), but it turns out that it ends up being
racy, in that erroring out before the module has been fully initialized
will cause failures in dependent module loading.
See commit ac2263b588df (which was the revert of that "error out early")
commit for details about why erroring out before the module has been
initialized is actually fundamentally racy.
Now, for the actual recursive module load (as opposed to just
concurrently loading the same module twice), the race is not an issue.
At the same time it's hard for the kernel to see that this is recursion,
because the module load is always done from a usermode helper, so the
recursion is not some simple callchain within the kernel.
End result: this is not the real fix, but this at least adds a warning
for the situation (admittedly much too late for all the debugging pain
that Russell and Herbert went through) and if we can come to a
resolution on how to detect the recursion properly, this re-organizes
the code to make that easier.
Link: https://lore.kernel.org/all/ZrFHLqvFqhzykuYw@shell.armlinux.org.uk/
Reported-by: Russell King <linux@armlinux.org.uk>
Debugged-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 2124d84db293 ("module: make waiting for a concurrent module loader interruptible")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Wed Jul 31 13:05:53 2024 +0200
mptcp: fully established after ADD_ADDR echo on MPJ
commit d67c5649c1541dc93f202eeffc6f49220a4ed71d upstream.
Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.
Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.
We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.
Fixes: 67b12f792d5e ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Wed Jul 31 13:05:54 2024 +0200
mptcp: pm: deny endp with signal + subflow + port
commit 8af1f11865f259c882cce71d32f85ee9004e2660 upstream.
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7a5 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Aug 12 17:30:54 2024 +0200
mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set
commit 85df533a787bf07bf4367ce2a02b822ff1fba1a3 upstream.
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Aug 12 17:30:53 2024 +0200
mptcp: pm: don't try to create sf if alloc failed
commit cd7c957f936f8cb80d03e5152f4013aae65bd986 upstream.
It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.
While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.
Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Sat Jul 27 12:01:28 2024 +0200
mptcp: pm: fix backup support in signal endpoints
commit 6834097fc38c5416701c793da94558cea49c0a1f upstream.
There was a support for signal endpoints, but only when the endpoint's
flag was changed during a connection. If an endpoint with the signal and
backup was already present, the MP_JOIN reply was not containing the
backup flag as expected.
That's confusing to have this inconsistent behaviour. On the other hand,
the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was
already there, it was just never set before. Now when requesting the
local ID from the path-manager, the backup status is also requested.
Note that when the userspace PM is used, the backup flag can be set if
the local address was already used before with a backup flag, e.g. if
the address was announced with the 'backup' flag, or a subflow was
created with the 'backup' flag.
Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Conflicts in pm_userspace.c because the context has changed in commit
1e07938e29c5 ("net: mptcp: rename netlink handlers to
mptcp_pm_nl_<blah>_{doit,dumpit}") which is not in this version. This
commit is unrelated to this modification.
Conflicts in protocol.h because the context has changed in commit
9ae7846c4b6b ("mptcp: dump addrs in userspace pm list") which is not
in this version. This commit is unrelated to this modification. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Aug 12 17:30:52 2024 +0200
mptcp: pm: reduce indentation blocks
commit c95eb32ced823a00be62202b43966b07b2f20b7f upstream.
That will simplify the following commits.
No functional changes intended.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-3-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: cd7c957f936f ("mptcp: pm: don't try to create sf if alloc failed")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dragos Tatulea <dtatulea@nvidia.com>
Date: Tue Jun 4 00:22:08 2024 +0300
net/mlx5e: SHAMPO, Fix invalid WQ linked list unlink
[ Upstream commit fba8334721e266f92079632598e46e5f89082f30 ]
When all the strides in a WQE have been consumed, the WQE is unlinked
from the WQ linked list (mlx5_wq_ll_pop()). For SHAMPO, it is possible
to receive CQEs with 0 consumed strides for the same WQE even after the
WQE is fully consumed and unlinked. This triggers an additional unlink
for the same wqe which corrupts the linked list.
Fix this scenario by accepting 0 sized consumed strides without
unlinking the WQE again.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240603212219.1037656-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhengchao Shao <shaozhengchao@huawei.com>
Date: Mon Aug 5 12:38:56 2024 +0800
net/smc: add the max value of fallback reason count
[ Upstream commit d27a835f41d947f62e6a95e89ba523299c9e6437 ]
The number of fallback reasons defined in the smc_clc.h file has reached
36. For historical reasons, some are no longer quoted, and there's 33
actually in use. So, add the max value of fallback reason count to 36.
Fixes: 6ac1e6563f59 ("net/smc: support smc v2.x features validate")
Fixes: 7f0620b9940b ("net/smc: support max connections per lgr negotiation")
Fixes: 69b888e3bb4b ("net/smc: support max links per lgr negotiation in clc handshake")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Link: https://patch.msgid.link/20240805043856.565677-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Fainelli <florian.fainelli@broadcom.com>
Date: Tue Aug 6 10:56:59 2024 -0700
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
[ Upstream commit 9ee09edc05f20422e7ced84b1f8a5d3359926ac8 ]
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806175659.3232204-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikolay Aleksandrov <razor@blackwall.org>
Date: Fri Aug 2 11:07:30 2024 +0300
net: bridge: mcast: wait for previous gc cycles when removing port
[ Upstream commit 92c4ee25208d0f35dafc3213cdf355fbe449e078 ]
syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
CPU 1 CPU 2
start gc cycle remove port
acquire gc lock first
wait for lock
call br_multicasg_gc() directly
acquire lock now but free port
the port can be freed
while grp timers still
running
Make sure all previous gc cycles have finished by using flush_work before
freeing the port.
[1]
BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699
CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers+0x74b/0xaf0 kernel/time/timer.c:2417
__run_timer_base kernel/time/timer.c:2428 [inline]
__run_timer_base kernel/time/timer.c:2421 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2437
Reported-by: syzbot+263426984509be19c9a0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=263426984509be19c9a0
Fixes: e12cec65b554 ("net: bridge: mcast: destroy all entries via gc")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20240802080730.3206303-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Willem de Bruijn <willemb@google.com>
Date: Mon Jul 29 16:10:12 2024 -0400
net: drop bad gso csum_start and offset in virtio_net_hdr
commit 89add40066f9ed9abe5f7f886fe5789ff7e0c50e upstream.
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb
for GSO packets.
The function already checks that a checksum requested with
VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets
this might not hold for segs after segmentation.
Syzkaller demonstrated to reach this warning in skb_checksum_help
offset = skb_checksum_start_offset(skb);
ret = -EINVAL;
if (WARN_ON_ONCE(offset >= skb_headlen(skb)))
By injecting a TSO packet:
WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0
ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774
ip_finish_output_gso net/ipv4/ip_output.c:279 [inline]
__ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301
iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4850 [inline]
netdev_start_xmit include/linux/netdevice.h:4864 [inline]
xmit_one net/core/dev.c:3595 [inline]
dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611
__dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261
packet_snd net/packet/af_packet.c:3073 [inline]
The geometry of the bad input packet at tcp_gso_segment:
[ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0
[ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244
[ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0))
[ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536
ip_summed=3 complete_sw=0 valid=0 level=0)
Mitigate with stricter input validation.
csum_offset: for GSO packets, deduce the correct value from gso_type.
This is already done for USO. Extend it to TSO. Let UFO be:
udp[46]_ufo_fragment ignores these fields and always computes the
checksum in software.
csum_start: finding the real offset requires parsing to the transport
header. Do not add a parser, use existing segmentation parsing. Thanks
to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded.
Again test both TSO and USO. Do not test UFO for the above reason, and
do not test UDP tunnel offload.
GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be
CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit
from devices with no checksum offload"), but then still these fields
are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no
need to test for ip_summed == CHECKSUM_PARTIAL first.
This revises an existing fix mentioned in the Fixes tag, which broke
small packets with GSO offload, as detected by kselftests.
Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871
Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org
Fixes: e269d79c7d35 ("net: missing check virtio")
Cc: stable@vger.kernel.org
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Date: Tue Aug 6 10:13:27 2024 +0900
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
[ Upstream commit e3862093ee93fcfbdadcb7957f5f8974fffa806a ]
bcm_sf2_mdio_register() calls of_phy_find_device() and then
phy_device_remove() in a loop to remove existing PHY devices.
of_phy_find_device() eventually calls bus_find_device(), which calls
get_device() on the returned struct device * to increment the refcount.
The current implementation does not decrement the refcount, which causes
memory leak.
This commit adds the missing phy_device_free() call to decrement the
refcount via put_device() to balance the refcount.
Fixes: 771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Csókás, Bence <csokas.bence@prolan.hu>
Date: Wed Aug 7 10:09:56 2024 +0200
net: fec: Stop PPS on driver remove
[ Upstream commit 8fee6d5ad5fa18c270eedb2a2cdf58dbadefb94b ]
PPS was not stopped in `fec_ptp_stop()`, called when
the adapter was removed. Consequentially, you couldn't
safely reload the driver with the PPS signal on.
Fixes: 32cba57ba74b ("net: fec: introduce fec_ptp_stop and use in probe fail path")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/netdev/CAOMZO5BzcZR8PwKKwBssQq_wAGzVgf1ffwe_nhpQJjviTdxy-w@mail.gmail.com/T/#m01dcb810bfc451a492140f6797ca77443d0cb79f
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240807080956.2556602-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Aug 5 08:58:21 2024 +0000
net: linkwatch: use system_unbound_wq
[ Upstream commit 3e7917c0cdad835a5121520fc5686d954b7a61ab ]
linkwatch_event() grabs possibly very contended RTNL mutex.
system_wq is not suitable for such work.
Inspired by many noisy syzbot reports.
3 locks held by kworker/0:7/5266:
#0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3206 [inline]
#0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x90a/0x1830 kernel/workqueue.c:3312
#1: ffffc90003f6fd00 ((linkwatch_work).work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3207 [inline]
, at: process_scheduled_works+0x945/0x1830 kernel/workqueue.c:3312
#2: ffffffff8fa6f208 (rtnl_mutex){+.+.}-{3:3}, at: linkwatch_event+0xe/0x60 net/core/link_watch.c:276
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240805085821.1616528-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Date: Wed Jul 3 20:14:59 2024 +0200
net: stmmac: qcom-ethqos: enable SGMII loopback during DMA reset on sa8775p-ride-r3
[ Upstream commit 3c466d6537b99f801b3f68af3d8124d4312437a0 ]
On sa8775p-ride-r3 the RX clocks from the AQR115C PHY are not available at
the time of the DMA reset. We can however extract the RX clock from the
internal SERDES block. Once the link is up, we can revert to the
previous state.
The AQR115C PHY doesn't support in-band signalling so we can count on
getting the link up notification and safely reuse existing callbacks
which are already used by another HW quirk workaround which enables the
functional clock to avoid a DMA reset due to timeout.
Only enable loopback on revision 3 of the board - check the phy_mode to
make sure.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240703181500.28491-3-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniele Palmas <dnlplm@gmail.com>
Date: Thu Aug 1 15:55:12 2024 +0200
net: usb: qmi_wwan: fix memory leak for not ip packets
[ Upstream commit 7ab107544b777c3bd7feb9fe447367d8edd5b202 ]
Free the unused skb when not ip packets arrive.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Thu Jul 11 11:06:39 2024 +0200
netfilter: nf_tables: prefer nft_chain_validate
commit cff3bd012a9512ac5ed858d38e6ed65f6391008c upstream.
nft_chain_validate already performs loop detection because a cycle will
result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE).
It also follows maps via ->validate callback in nft_lookup, so there
appears no reason to iterate the maps again.
nf_tables_check_loops() and all its helper functions can be removed.
This improves ruleset load time significantly, from 23s down to 12s.
This also fixes a crash bug. Old loop detection code can result in
unbounded recursion:
BUG: TASK stack guard page was hit at ....
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN
CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1
[..]
with a suitable ruleset during validation of register stores.
I can't see any actual reason to attempt to check for this from
nft_validate_register_store(), at this point the transaction is still in
progress, so we don't have a full picture of the rule graph.
For nf-next it might make sense to either remove it or make this depend
on table->validate_state in case we could catch an error earlier
(for improved error reporting to userspace).
Fixes: 20a69341f2d0 ("netfilter: nf_tables: add netlink set API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 15 12:55:41 2024 +1000
nouveau: set placement to original placement on uvmm validate.
commit 9c685f61722d30a22d55bb8a48f7a48bb2e19bcc upstream.
When a buffer is evicted for memory pressure or TTM evict all,
the placement is set to the eviction domain, this means the
buffer never gets revalidated on the next exec to the correct domain.
I think this should be fine to use the initial domain from the
object creation, as least with VM_BIND this won't change after
init so this should be the correct answer.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515025542.2156774-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Justin Stitt <justinstitt@google.com>
Date: Fri May 17 20:22:44 2024 +0000
ntp: Clamp maxerror and esterror to operating range
[ Upstream commit 87d571d6fb77ec342a985afa8744bb9bb75b3622 ]
Using syzkaller alongside the newly reintroduced signed integer overflow
sanitizer spits out this report:
UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:461:16
9223372036854775807 + 500 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
second_overflow+0x2d6/0x500
accumulate_nsecs_to_secs+0x60/0x160
timekeeping_advance+0x1fe/0x890
update_wall_time+0x10/0x30
time_maxerror is unconditionally incremented and the result is checked
against NTP_PHASE_LIMIT, but the increment itself can overflow, resulting
in wrap-around to negative space.
Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping in handle_overflow() which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 500' operation.
The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.
Miroslav confirmed that the input value should be clamped to the operating
range and the same applies to time_esterror. The latter is not used by the
kernel, but the value still should be in the operating range as it was
before the sanity check got removed.
Clamp them to the operating range.
[ tglx: Changed it to clamping and included time_esterror ]
Fixes: eea83d896e31 ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-usec-v2-1-d539180f2b79@google.com
Closes: https://github.com/KSPP/linux/issues/354
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Stitt <justinstitt@google.com>
Date: Fri May 17 00:47:10 2024 +0000
ntp: Safeguard against time_constant overflow
commit 06c03c8edce333b9ad9c6b207d93d3a5ae7c10c0 upstream.
Using syzkaller with the recently reintroduced signed integer overflow
sanitizer produces this UBSAN report:
UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:738:18
9223372036854775806 + 4 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
__do_adjtimex+0x1236/0x1440
do_adjtimex+0x2be/0x740
The user supplied time_constant value is incremented by four and then
clamped to the operating range.
Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping after incrementing which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 4' operation.
The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.
Similar to the fixups for time_maxerror and time_esterror, clamp the user
space supplied value to the operating range.
[ tglx: Switch to clamping ]
Fixes: eea83d896e31 ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-c-v2-1-f3a80096f36f@google.com
Closes: https://github.com/KSPP/linux/issues/352
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Waiman Long <longman@redhat.com>
Date: Tue Aug 6 13:46:47 2024 -0400
padata: Fix possible divide-by-0 panic in padata_mt_helper()
commit 6d45e1c948a8b7ed6ceddb14319af69424db730c upstream.
We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.
[ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
[ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
[ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
[ 10.017908] Workqueue: events_unbound padata_mt_helper
[ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
:
[ 10.017963] Call Trace:
[ 10.017968] <TASK>
[ 10.018004] ? padata_mt_helper+0x39/0xb0
[ 10.018084] process_one_work+0x174/0x330
[ 10.018093] worker_thread+0x266/0x3a0
[ 10.018111] kthread+0xcf/0x100
[ 10.018124] ret_from_fork+0x31/0x50
[ 10.018138] ret_from_fork_asm+0x1a/0x30
[ 10.018147] </TASK>
Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0. The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.
Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are.
Link: https://lkml.kernel.org/r/20240806174647.1050398-1-longman@redhat.com
Fixes: 004ed42638f4 ("padata: add basic support for multithreaded jobs")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Sat Jul 27 20:22:52 2024 +0200
parisc: fix a possible DMA corruption
commit 7ae04ba36b381bffe2471eff3a93edced843240f upstream.
ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be
possible that two unrelated 16-byte allocations share a cache line. If
one of these allocations is written using DMA and the other is written
using cached write, the value that was written with DMA may be
corrupted.
This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 -
that's the largest possible cache line size.
As different parisc microarchitectures have different cache line size, we
define arch_slab_minalign(), cache_line_size() and
dma_get_cache_alignment() so that the kernel may tune slab cache
parameters dynamically, based on the detected cache line size.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Sat Jul 27 12:11:02 2024 +0200
parisc: fix unaligned accesses in BPF
commit 1fd2c10acb7b35d72101a4619ee5b2cddb9efd3a upstream.
There were spurious unaligned access warnings when calling BPF code.
Sometimes, the warnings were triggered with any incoming packet, making
the machine hard to use.
The reason for the warnings is this: on parisc64, pointers to functions
are not really pointers to functions, they are pointers to 16-byte
descriptor. The first 8 bytes of the descriptor is a pointer to the
function and the next 8 bytes of the descriptor is the content of the
"dp" register. This descriptor is generated in the function
bpf_jit_build_prologue.
The problem is that the function bpf_int_jit_compile advertises 4-byte
alignment when calling bpf_jit_binary_alloc, bpf_jit_binary_alloc
randomizes the returned array and if the array happens to be not aligned
on 8-byte boundary, the descriptor generated in bpf_jit_build_prologue is
also not aligned and this triggers the unaligned access warning.
Fix this by advertising 8-byte alignment on parisc64 when calling
bpf_jit_binary_alloc.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: FUJITA Tomonori <fujita.tomonori@gmail.com>
Date: Mon Jun 24 08:55:01 2024 +0900
PCI: Add Edimax Vendor ID to pci_ids.h
[ Upstream commit eee5528890d54b22b46f833002355a5ee94c3bb4 ]
Add the Edimax Vendor ID (0x1432) for an ethernet driver for Tehuti
Networks TN40xx chips. This ID can be used for Realtek 8180 and Ralink
rt28xx wireless drivers.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20240623235507.108147-2-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jithu Joseph <jithu.joseph@intel.com>
Date: Thu Oct 5 12:51:32 2023 -0700
platform/x86/intel/ifs: Gen2 Scan test support
[ Upstream commit 72b96ee29ed6f7670bbb180ba694816e33d361d1 ]
Width of chunk related bitfields is ACTIVATE_SCAN and SCAN_STATUS MSRs
are different in newer IFS generation compared to gen0.
Make changes to scan test flow such that MSRs are populated
appropriately based on the generation supported by hardware.
Account for the 8/16 bit MSR bitfield width differences between gen0 and
newer generations for the scan test trace event too.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-5-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 3114f77e9453 ("platform/x86/intel/ifs: Initialize union ifs_status to zero")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Date: Tue Jul 30 15:59:30 2024 +0000
platform/x86/intel/ifs: Initialize union ifs_status to zero
[ Upstream commit 3114f77e9453daa292ec0906f313a715c69b5943 ]
If the IFS scan test exits prematurely due to a timeout before
completing a single run, the union ifs_status remains uninitialized,
leading to incorrect test status reporting. To prevent this, always
initialize the union ifs_status to zero.
Fixes: 2b40e654b73a ("platform/x86/intel/ifs: Add scan test support")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240730155930.1754744-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jithu Joseph <jithu.joseph@intel.com>
Date: Thu Oct 5 12:51:29 2023 -0700
platform/x86/intel/ifs: Store IFS generation number
[ Upstream commit 97a5e801b3045c1e800f76bc0fb544972538089d ]
IFS generation number is reported via MSR_INTEGRITY_CAPS. As IFS
support gets added to newer CPUs, some differences are expected during
IFS image loading and test flows.
Define MSR bitmasks to extract and store the generation in driver data,
so that driver can modify its MSR interaction appropriately.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-2-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 3114f77e9453 ("platform/x86/intel/ifs: Initialize union ifs_status to zero")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Wed Jul 17 22:03:32 2024 +0200
power: supply: axp288_charger: Fix constant_charge_voltage writes
commit b34ce4a59cfe9cd0d6f870e6408e8ec88a964585 upstream.
info->max_cv is in millivolts, divide the microvolt value being written
to constant_charge_voltage by 1000 *before* clamping it to info->max_cv.
Before this fix the code always tried to set constant_charge_voltage
to max_cv / 1000 = 4 millivolt, which ends up in setting it to 4.1V
which is the lowest supported value.
Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240717200333.56669-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Wed Jul 17 22:03:33 2024 +0200
power: supply: axp288_charger: Round constant_charge_voltage writes down
commit 81af7f2342d162e24ac820c10e68684d9f927663 upstream.
Round constant_charge_voltage writes down to the first supported lower
value, rather then rounding them up to the first supported higher value.
This fixes e.g. writing 4250000 resulting in a value of 4350000 which
might be dangerous, instead writing 4250000 will now result in a safe
4200000 value.
Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240717200333.56669-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Neil Armstrong <neil.armstrong@linaro.org>
Date: Mon Jul 15 14:57:06 2024 +0200
power: supply: qcom_battmgr: return EAGAIN when firmware service is not up
commit bf9d5cb588755ee41ac12a8976dccf44ae18281b upstream.
The driver returns -ENODEV when the firmware battmrg service hasn't
started yet, while per-se -ENODEV is fine, we usually use -EAGAIN to
tell the user to retry again later. And the power supply core uses
-EGAIN when the device isn't initialized, let's use the same return.
This notably causes an infinite spam of:
thermal thermal_zoneXX: failed to read out thermal zone (-19)
because the thermal core doesn't understand -ENODEV, but only
considers -EAGAIN as a non-fatal error.
While it didn't appear until now, commit [1] fixes thermal core
and no more ignores thermal zones returning an error at first
temperature update.
[1] 5725f40698b9 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid")
Link: https://lore.kernel.org/all/2ed4c630-204a-4f80-a37f-f2ca838eb455@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 29e8142b5623 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20240715-topic-sm8x50-upstream-fix-battmgr-temp-tz-warn-v1-1-16e842ccead7@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Sun Aug 4 18:48:10 2024 +0900
profiling: remove profile=sleep support
commit b88f55389ad27f05ed84af9e1026aa64dbfabc9a upstream.
The kernel sleep profile is no longer working due to a recursive locking
bug introduced by commit 42a20f86dc19 ("sched: Add wrapper for get_wchan()
to keep task blocked")
Booting with the 'profile=sleep' kernel command line option added or
executing
# echo -n sleep > /sys/kernel/profiling
after boot causes the system to lock up.
Lockdep reports
kthreadd/3 is trying to acquire lock:
ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: get_wchan+0x32/0x70
but task is already holding lock:
ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: try_to_wake_up+0x53/0x370
with the call trace being
lock_acquire+0xc8/0x2f0
get_wchan+0x32/0x70
__update_stats_enqueue_sleeper+0x151/0x430
enqueue_entity+0x4b0/0x520
enqueue_task_fair+0x92/0x6b0
ttwu_do_activate+0x73/0x140
try_to_wake_up+0x213/0x370
swake_up_locked+0x20/0x50
complete+0x2f/0x40
kthread+0xfb/0x180
However, since nobody noticed this regression for more than two years,
let's remove 'profile=sleep' support based on the assumption that nobody
needs this functionality.
Fixes: 42a20f86dc19 ("sched: Add wrapper for get_wchan() to keep task blocked")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Frederic Weisbecker <frederic@kernel.org>
Date: Fri May 24 16:05:24 2024 +0200
rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation
[ Upstream commit 55d4669ef1b76823083caecfab12a8bd2ccdcf64 ]
When rcu_barrier() calls rcu_rdp_cpu_online() and observes a CPU off
rnp->qsmaskinitnext, it means that all accesses from the offline CPU
preceding the CPUHP_TEARDOWN_CPU are visible to RCU barrier, including
callbacks expiration and counter updates.
However interrupts can still fire after stop_machine() re-enables
interrupts and before rcutree_report_cpu_dead(). The related accesses
happening between CPUHP_TEARDOWN_CPU and rnp->qsmaskinitnext clearing
are _NOT_ guaranteed to be seen by rcu_barrier() without proper
ordering, especially when callbacks are invoked there to the end, making
rcutree_migrate_callback() bypass barrier_lock.
The following theoretical race example can make rcu_barrier() hang:
CPU 0 CPU 1
----- -----
//cpu_down()
smpboot_park_threads()
//ksoftirqd is parked now
<IRQ>
rcu_sched_clock_irq()
invoke_rcu_core()
do_softirq()
rcu_core()
rcu_do_batch()
// callback storm
// rcu_do_batch() returns
// before completing all
// of them
// do_softirq also returns early because of
// timeout. It defers to ksoftirqd but
// it's parked
</IRQ>
stop_machine()
take_cpu_down()
rcu_barrier()
spin_lock(barrier_lock)
// observes rcu_segcblist_n_cbs(&rdp->cblist) != 0
<IRQ>
do_softirq()
rcu_core()
rcu_do_batch()
//completes all pending callbacks
//smp_mb() implied _after_ callback number dec
</IRQ>
rcutree_report_cpu_dead()
rnp->qsmaskinitnext &= ~rdp->grpmask;
rcutree_migrate_callback()
// no callback, early return without locking
// barrier_lock
//observes !rcu_rdp_cpu_online(rdp)
rcu_barrier_entrain()
rcu_segcblist_entrain()
// Observe rcu_segcblist_n_cbs(rsclp) == 0
// because no barrier between reading
// rnp->qsmaskinitnext and rsclp->len
rcu_segcblist_add_len()
smp_mb__before_atomic()
// will now observe the 0 count and empty
// list, but too late, we enqueue regardless
WRITE_ONCE(rsclp->len, rsclp->len + v);
// ignored barrier callback
// rcu barrier stall...
This could be solved with a read memory barrier, enforcing the message
passing between rnp->qsmaskinitnext and rsclp->len, matching the full
memory barrier after rsclp->len addition in rcu_segcblist_add_len()
performed at the end of rcu_do_batch().
However the rcu_barrier() is complicated enough and probably doesn't
need too many more subtleties. CPU down is a slowpath and the
barrier_lock seldom contended. Solve the issue with unconditionally
locking the barrier_lock on rcutree_migrate_callbacks(). This makes sure
that either rcu_barrier() sees the empty queue or its entrained
callback will be migrated.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paul E. McKenney <paulmck@kernel.org>
Date: Fri Apr 5 12:02:11 2024 -0700
rcutorture: Fix rcu_torture_fwd_cb_cr() data race
[ Upstream commit 6040072f4774a575fa67b912efe7722874be337b ]
On powerpc systems, spinlock acquisition does not order prior stores
against later loads. This means that this statement:
rfcp->rfc_next = NULL;
Can be reordered to follow this statement:
WRITE_ONCE(*rfcpp, rfcp);
Which is then a data race with rcu_torture_fwd_prog_cr(), specifically,
this statement:
rfcpn = READ_ONCE(rfcp->rfc_next)
KCSAN located this data race, which represents a real failure on powerpc.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <kasan-dev@googlegroups.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ivan Lipski <ivlipski@amd.com>
Date: Fri Jun 7 12:33:59 2024 -0400
Revert "drm/amd/display: Add NULL check for 'afb' before dereferencing in amdgpu_dm_plane_handle_cursor_update"
commit 778e3979c5dc9cbdb5d1b92afed427de6bc483b4 upstream.
[WHY]
This patch is a dupplicate implementation of 14bcf29b, which we
are reverting due to a regression with kms_plane_cursor IGT tests.
This reverts commit 38e6f715b02b572f74677eb2f29d3b4bc6f1ddff.
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Tested-by: George Zhang <George.zhang@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Aug 12 17:31:34 2024 +0200
Revert "selftests: mptcp: simult flows: mark 'unbalanced' tests as flaky"
This reverts commit 052c9f0c140c78e5d6826688b5d2f33e19db0ae7.
If the test doesn't pass, we can get this error:
# ./simult_flows.sh: line 275: mptcp_lib_subtest_is_flaky: command not found
This patch is not needed in v6.6: it is there to mark a test as "flaky",
but the MPTCP selftests infrastructure in v6.6 doesn't support them. So
it looks better to revert this patch.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Oberparleiter <oberpar@linux.ibm.com>
Date: Thu Jun 20 14:20:27 2024 +0200
s390/sclp: Prevent release of buffer in I/O
[ Upstream commit bf365071ea92b9579d5a272679b74052a5643e35 ]
When a task waiting for completion of a Store Data operation is
interrupted, an attempt is made to halt this operation. If this attempt
fails due to a hardware or firmware problem, there is a chance that the
SCLP facility might store data into buffers referenced by the original
operation at a later time.
Handle this situation by not releasing the referenced data buffers if
the halt attempt fails. For current use cases, this might result in a
leak of few pages of memory in case of a rare hardware/firmware
malfunction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Wed Jul 3 11:16:10 2024 +0800
sched/core: Fix unbalance set_rq_online/offline() in sched_cpu_deactivate()
commit fe7a11c78d2a9bdb8b50afc278a31ac177000948 upstream.
If cpuset_cpu_inactive() fails, set_rq_online() need be called to rollback.
Fixes: 120455c514f7 ("sched: Fix hotplug vs CPU bandwidth control")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-5-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Wed Jul 3 11:16:09 2024 +0800
sched/core: Introduce sched_set_rq_on/offline() helper
commit 2f027354122f58ee846468a6f6b48672fff92e9b upstream.
Introduce sched_set_rq_on/offline() helper, so it can be called
in normal or error path simply. No functional changed.
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-4-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zheng Zucheng <zhengzucheng@huawei.com>
Date: Fri Jul 26 02:32:35 2024 +0000
sched/cputime: Fix mul_u64_u64_div_u64() precision for cputime
commit 77baa5bafcbe1b2a15ef9c37232c21279c95481c upstream.
In extreme test scenarios:
the 14th field utime in /proc/xx/stat is greater than sum_exec_runtime,
utime = 18446744073709518790 ns, rtime = 135989749728000 ns
In cputime_adjust() process, stime is greater than rtime due to
mul_u64_u64_div_u64() precision problem.
before call mul_u64_u64_div_u64(),
stime = 175136586720000, rtime = 135989749728000, utime = 1416780000.
after call mul_u64_u64_div_u64(),
stime = 135989949653530
unsigned reversion occurs because rtime is less than stime.
utime = rtime - stime = 135989749728000 - 135989949653530
= -199925530
= (u64)18446744073709518790
Trigger condition:
1). User task run in kernel mode most of time
2). ARM64 architecture
3). TICK_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
Fix mul_u64_u64_div_u64() conversion precision by reset stime to rtime
Fixes: 3dc167ba5729 ("sched/cputime: Improve cputime_adjust()")
Signed-off-by: Zheng Zucheng <zhengzucheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20240726023235.217771-1-zhengzucheng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Wed Jul 3 11:16:08 2024 +0800
sched/smt: Fix unbalance sched_smt_present dec/inc
commit e22f910a26cc2a3ac9c66b8e935ef2a7dd881117 upstream.
I got the following warn report while doing stress test:
jump label: negative count!
WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked+0x16/0x70
sched_cpu_deactivate+0x26e/0x2a0
cpuhp_invoke_callback+0x3ad/0x10d0
cpuhp_thread_fun+0x3f5/0x680
smpboot_thread_fn+0x56d/0x8d0
kthread+0x309/0x400
ret_from_fork+0x41/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(),
the cpu offline failed, but sched_smt_present is decremented before
calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so
fix it by incrementing sched_smt_present in the error path.
Fixes: c5511d03ec09 ("sched/smt: Make sched_smt_present track topology")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20240703031610.587047-3-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Wed Jul 3 11:16:07 2024 +0800
sched/smt: Introduce sched_smt_present_inc/dec() helper
commit 31b164e2e4af84d08d2498083676e7eeaa102493 upstream.
Introduce sched_smt_present_inc/dec() helper, so it can be called
in normal or error path simply. No functional changed.
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-2-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Damien Le Moal <dlemoal@kernel.org>
Date: Fri Jul 19 16:39:11 2024 +0900
scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONES
commit 1abc900ddda8ad2ef739fedf498d415655b6c3b8 upstream.
Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT
ZONES command reply buffer from ATA-ZAC devices by directly accessing the
buffer in the host memory. This does not respect the default command DMA
direction and causes IOMMU page faults on architectures with an IOMMU
enforcing write-only mappings for DMA_FROM_DEVICE DMA direction (e.g. AMD
hosts), leading to the device capacity to be dropped to 0:
scsi 18:0:58:0: Direct-Access-ZBC ATA WDC WSH722626AL W930 PQ: 0 ANSI: 7
scsi 18:0:58:0: Power-on or device reset occurred
sd 18:0:58:0: Attached scsi generic sg9 type 20
sd 18:0:58:0: [sdj] Host-managed zoned block device
mpi3mr 0000:c1:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfec0c400 flags=0x0050]
mpi3mr 0000:c1:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfec0c500 flags=0x0050]
sd 18:0:58:0: [sdj] REPORT ZONES start lba 0 failed
sd 18:0:58:0: [sdj] REPORT ZONES: Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK
sd 18:0:58:0: [sdj] 0 4096-byte logical blocks: (0 B/0 B)
sd 18:0:58:0: [sdj] Write Protect is off
sd 18:0:58:0: [sdj] Mode Sense: 6b 00 10 08
sd 18:0:58:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 18:0:58:0: [sdj] Attached SCSI disk
Avoid this issue by always mapping the buffer of REPORT ZONES commands
using DMA_BIDIRECTIONAL, that is, using a read-write IOMMU mapping.
Suggested-by: Christoph Hellwig <hch@lst.de>
Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240719073913.179559-2-dlemoal@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Damien Le Moal <dlemoal@kernel.org>
Date: Fri Jul 19 16:39:12 2024 +0900
scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES
commit 82dbb57ac8d06dfe8227ba9ab11a49de2b475ae5 upstream.
Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT
ZONES command reply buffer from ATA-ZAC devices by directly accessing the
buffer in the host memory. This does not respect the default command DMA
direction and causes IOMMU page faults on architectures with an IOMMU
enforcing write-only mappings for DMA_FROM_DEVICE DMA driection (e.g. AMD
hosts).
scsi 18:0:0:0: Direct-Access-ZBC ATA WDC WSH722020AL W870 PQ: 0 ANSI: 6
scsi 18:0:0:0: SATA: handle(0x0027), sas_addr(0x300062b2083e7c40), phy(0), device_name(0x5000cca29dc35e11)
scsi 18:0:0:0: enclosure logical id (0x300062b208097c40), slot(0)
scsi 18:0:0:0: enclosure level(0x0000), connector name( C0.0)
scsi 18:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 18:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
sd 18:0:0:0: Attached scsi generic sg2 type 20
sd 18:0:0:0: [sdc] Host-managed zoned block device
mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b200 flags=0x0050]
mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b300 flags=0x0050]
mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler: Releasing the trace buffer due to adapter reset.
mpt3sas_cm0 fault info from func: mpt3sas_base_make_ioc_ready
mpt3sas_cm0: fault_state(0x2666)!
mpt3sas_cm0: sending diag reset !!
mpt3sas_cm0: diag reset: SUCCESS
sd 18:0:0:0: [sdc] REPORT ZONES start lba 0 failed
sd 18:0:0:0: [sdc] REPORT ZONES: Result: hostbyte=DID_RESET driverbyte=DRIVER_OK
sd 18:0:0:0: [sdc] 0 4096-byte logical blocks: (0 B/0 B)
Avoid such issue by always mapping the buffer of REPORT ZONES commands
using DMA_BIDIRECTIONAL (read+write IOMMU mapping). This is done by
introducing the helper function _base_scsi_dma_map() and using this helper
in _base_build_sg_scmd() and _base_build_sg_scmd_ieee() instead of calling
directly scsi_dma_map().
Fixes: 471ef9d4e498 ("mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAs")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240719073913.179559-3-dlemoal@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Thu Jul 18 22:36:59 2024 +0530
scsi: ufs: core: Do not set link to OFF state while waking up from hibernation
commit ac6efb12ca64156f4a94e964acdb96ee7d59630d upstream.
UFS link is just put into hibern8 state during the 'freeze' process of the
hibernation. Afterwards, the system may get powered down. But that doesn't
matter during wakeup. Because during wakeup from hibernation, UFS link is
again put into hibern8 state by the restore kernel and then the control is
handed over to the to image kernel.
So in both the places, UFS link is never turned OFF. But
ufshcd_system_restore() just assumes that the link will be in OFF state and
sets the link state accordingly. And this breaks hibernation wakeup:
[ 2445.371335] phy phy-1d87000.phy.3: phy_power_on was called before phy_init
[ 2445.427883] ufshcd-qcom 1d84000.ufshc: Controller enable failed
[ 2445.427890] ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
[ 2445.427906] ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5
[ 2445.427918] ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_restore returns -5
[ 2445.427973] ufs_device_wlun 0:0:0:49488: PM: failed to restore async: error -5
So fix the issue by removing the code that sets the link to OFF state.
Cc: Anjana Hari <quic_ahari@quicinc.com>
Cc: stable@vger.kernel.org # 6.3
Fixes: 88441a8d355d ("scsi: ufs: core: Add hibernation callbacks")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240718170659.201647-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vamshi Gajjela <vamshigajjela@google.com>
Date: Wed Jul 24 19:21:26 2024 +0530
scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic
commit ab9fd06cb8f0db0854291833fc40c789e43a361f upstream.
The ufshcd_add_delay_before_dme_cmd() always introduces a delay of
MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not
required. The delay is added when the UFS host controller supplies the
quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS.
Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME
commands have the correct delay in the range of 0 to
MIN_DELAY_BEFORE_DME_CMDS_US.
Update the timestamp at the end of the function to ensure it captures the
latest time after any necessary delay has been applied.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com
Fixes: cad2e03d8607 ("ufs: add support to allow non standard behaviours (quirks)")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Wed Jul 31 16:46:24 2024 -0700
sctp: Fix null-ptr-deref in reuseport_add_sock().
[ Upstream commit 9ab0faa7f9ffe31296dbb9bbe6f76c72c14eea18 ]
syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in
reuseport_add_sock(). [0]
The repro first creates a listener with SO_REUSEPORT. Then, it creates
another listener on the same port and concurrently closes the first
listener.
The second listen() calls reuseport_add_sock() with the first listener as
sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,
but the close() does clear it by reuseport_detach_sock().
The problem is SCTP does not properly synchronise reuseport_alloc(),
reuseport_add_sock(), and reuseport_detach_sock().
The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must
provide synchronisation for sockets that are classified into the same
reuseport group.
Otherwise, such sockets form multiple identical reuseport groups, and
all groups except one would be silently dead.
1. Two sockets call listen() concurrently
2. No socket in the same group found in sctp_ep_hashtable[]
3. Two sockets call reuseport_alloc() and form two reuseport groups
4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives
incoming packets
Also, the reported null-ptr-deref could occur.
TCP/UDP guarantees that would not happen by holding the hash bucket lock.
Let's apply the locking strategy to __sctp_hash_endpoint() and
__sctp_unhash_endpoint().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350
Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14
RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012
RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385
R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__sctp_hash_endpoint net/sctp/input.c:762 [inline]
sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790
sctp_listen_start net/sctp/socket.c:8570 [inline]
sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625
__sys_listen_socket net/socket.c:1883 [inline]
__sys_listen+0x1b7/0x230 net/socket.c:1894
__do_sys_listen net/socket.c:1902 [inline]
__se_sys_listen net/socket.c:1900 [inline]
__x64_sys_listen+0x5a/0x70 net/socket.c:1900
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f24e46039b9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9
RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004
RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0
R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c
R13: 00007f24e465a5dc R14: 0020000000000001 R15: 00007ffcced5f7d8
</TASK>
Modules linked in:
Fixes: 6ba845740267 ("sctp: process sk_reuseport in sctp_get_port_local")
Reported-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e6979a5d2f10ecb700e4
Tested-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20240731234624.94055-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yonghong Song <yonghong.song@linux.dev>
Date: Wed Jun 5 13:12:03 2024 -0700
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
[ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ]
Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT
configs. In this particular case, the base VM is AMD with 166 cpus, and I
run selftests with regular qemu on top of that and indeed send_signal test
failed. I also tried with an Intel box with 80 cpus and there is no issue.
The main qemu command line includes:
-enable-kvm -smp 16 -cpu host
The failure log looks like:
$ ./test_progs -t send_signal
[ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225]
[ 48.503622] Modules linked in: bpf_testmod(O)
[ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69
[ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290
[ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb
[ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246
[ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0
[ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000
[ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000
[ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280
[ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000
[ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0
[ 48.537538] Call Trace:
[ 48.537538] <IRQ>
[ 48.537538] ? watchdog_timer_fn+0x1cd/0x250
[ 48.539590] ? lockup_detector_update_enable+0x50/0x50
[ 48.539590] ? __hrtimer_run_queues+0xff/0x280
[ 48.542520] ? hrtimer_interrupt+0x103/0x230
[ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140
[ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90
[ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 48.547612] ? handle_softirqs+0x71/0x290
[ 48.547612] irq_exit_rcu+0x63/0x80
[ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90
[ 48.552521] </IRQ>
[ 48.553529] <TASK>
[ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260
[ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74
[ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282
[ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620
[ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00
[ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000
[ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000
[ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00
[ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260
[ 48.576523] __schedule+0x364/0xac0
[ 48.577535] schedule+0x2e/0x110
[ 48.578555] pipe_read+0x301/0x400
[ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30
[ 48.579589] vfs_read+0x2b3/0x2f0
[ 48.579589] ksys_read+0x8b/0xc0
[ 48.583590] do_syscall_64+0x3d/0xc0
[ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 48.586525] RIP: 0033:0x7f2f28703fa1
[ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0
[ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1
[ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006
[ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000
[ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0
[ 48.605527] </TASK>
In the test, two processes are communicating through pipe. Further debugging
with strace found that the above splat is triggered as read() syscall could
not receive the data even if the corresponding write() syscall in another
process successfully wrote data into the pipe.
The failed subtest is "send_signal_perf". The corresponding perf event has
sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every
overflow event will trigger a call to the BPF program. So I suspect this may
overwhelm the system. So I increased the sample_period to 100,000 and the test
passed. The sample_period 10,000 still has the test failed.
In other parts of selftest, e.g., [1], sample_freq is used instead. So I
decided to use sample_freq = 1,000 since the test can pass as well.
[1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nico Pache <npache@redhat.com>
Date: Wed Jul 24 15:35:17 2024 -0600
selftests: mm: add s390 to ARCH check
commit 30b651c8bc788c068a978dc760e9d5f824f7019e upstream.
commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
changed the env variable for the architecture from MACHINE to ARCH.
This is preventing 3 required TEST_GEN_FILES from being included when
cross compiling s390x and errors when trying to run the test suite. This
is due to the ARCH variable already being set and the arch folder name
being s390.
Add "s390" to the filtered list to cover this case and have the 3 files
included in the build.
Link: https://lkml.kernel.org/r/20240724213517.23918-1-npache@redhat.com
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paolo Abeni <pabeni@redhat.com>
Date: Sat Jul 27 11:04:02 2024 +0200
selftests: mptcp: fix error path
commit 4a2f48992ddf4b8c2fba846c6754089edae6db5a upstream.
pm_nl_check_endpoint() currently calls an not existing helper
to mark the test as failed. Fix the wrong call.
Fixes: 03668c65d153 ("selftests: mptcp: join: rework detailed report")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ Conflicts in mptcp_join.sh because the context has changed in commit
571d79664a4a ("selftests: mptcp: join: update endpoint ops") which is
not in this version. This commit is unrelated to this modification. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Aug 12 17:30:55 2024 +0200
selftests: mptcp: join: ability to invert ADD_ADDR check
commit bec1f3b119ebc613d08dfbcdbaef01a79aa7de92 upstream.
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Aug 12 17:30:56 2024 +0200
selftests: mptcp: join: test both signal & subflow
commit 4d2868b5d191c74262f7407972d68d1bf3245d6a upstream.
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: George Kennedy <george.kennedy@oracle.com>
Date: Wed Jul 17 07:24:38 2024 -0500
serial: core: check uartclk for zero to avoid divide by zero
commit 6eabce6608d6f3440f4c03aa3d3ef50a47a3d193 upstream.
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
(discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Reported-by: syzkaller <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Rule: add
Link: https://lore.kernel.org/stable/1721148848-9784-1-git-send-email-george.kennedy%40oracle.com
Link: https://lore.kernel.org/r/1721219078-3209-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steve French <stfrench@microsoft.com>
Date: Wed Jul 31 21:38:50 2024 -0500
smb3: fix setting SecurityFlags when encryption is required
commit 1b5487aefb1ce7a6b1f15a33297d1231306b4122 upstream.
Setting encryption as required in security flags was broken.
For example (to require all mounts to be encrypted by setting):
"echo 0x400c5 > /proc/fs/cifs/SecurityFlags"
Would return "Invalid argument" and log "Unsupported security flags"
This patch fixes that (e.g. allowing overriding the default for
SecurityFlags 0x00c5, including 0x40000 to require seal, ie
SMB3.1.1 encryption) so now that works and forces encryption
on subsequent mounts.
Acked-by: Bharath SM <bharathsm@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paulo Alcantara <pc@manguebit.com>
Date: Wed Jul 31 10:23:39 2024 -0300
smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
[ Upstream commit 4b96024ef2296b1d323af327cae5e52809b61420 ]
As per MS-FSA 2.1.5.10.14, support for FSCTL_GET_REPARSE_POINT is
optional and if the server doesn't support it,
STATUS_INVALID_DEVICE_REQUEST must be returned for the operation.
If we find files with reparse points and we can't read them due to
lack of client or server support, just ignore it and then treat them
as regular files or junctions.
Fixes: 5f71ebc41294 ("smb: client: parse reparse point flag in create response")
Reported-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Wahren <wahrenst@gmx.net>
Date: Sun Aug 4 13:36:11 2024 +0200
spi: spi-fsl-lpspi: Fix scldiv calculation
[ Upstream commit 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 ]
The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in undefined behavior of the SPI device.
Currently the scldiv calculation could violate this constraint.
For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz,
the function fsl_lpspi_set_bitrate will determine perscale = 0 and
scldiv = 1, which is a effective SPI clock of 8 MHz.
So fix this by rounding up the quotient of perclk_rate and speed_hz.
While this never change within the loop, we can pull this out.
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue Jul 30 15:35:47 2024 +0200
spi: spidev: Add missing spi_device_id for bh2228fv
[ Upstream commit e4c4638b6a10427d30e29d22351c375886025f47 ]
When the of_device_id entry for "rohm,bh2228fv" was added, the
corresponding spi_device_id was forgotten, causing a warning message
during boot-up:
SPI driver spidev has no spi_device_id for rohm,bh2228fv
Fix module autoloading and shut up the warning by adding the missing
entry.
Fixes: fc28d1c1fe3b3e2f ("spi: spidev: add correct compatible for Rohm BH2228FV")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/cb571d4128f41175f31319cd9febc829417ea167.1722346539.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Coddington <bcodding@redhat.com>
Date: Wed Jul 17 10:49:33 2024 -0400
SUNRPC: Fix a race to wake a sync task
[ Upstream commit ed0172af5d6fc07d1b40ca82f5ca3979300369f7 ]
We've observed NFS clients with sync tasks sleeping in __rpc_execute
waiting on RPC_TASK_QUEUED that have not responded to a wake-up from
rpc_make_runnable(). I suspect this problem usually goes unnoticed,
because on a busy client the task will eventually be re-awoken by another
task completion or xprt event. However, if the state manager is draining
the slot table, a sync task missing a wake-up can result in a hung client.
We've been able to prove that the waker in rpc_make_runnable() successfully
calls wake_up_bit() (ie- there's no race to tk_runstate), but the
wake_up_bit() call fails to wake the waiter. I suspect the waker is
missing the load of the bit's wait_queue_head, so waitqueue_active() is
false. There are some very helpful comments about this problem above
wake_up_bit(), prepare_to_wait(), and waitqueue_active().
Fix this by inserting smp_mb__after_atomic() before the wake_up_bit(),
which pairs with prepare_to_wait() calling set_current_state().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Wed Jul 31 12:23:51 2024 +0200
tick/broadcast: Move per CPU pointer access into the atomic section
commit 6881e75237a84093d0986f56223db3724619f26e upstream.
The recent fix for making the take over of the broadcast timer more
reliable retrieves a per CPU pointer in preemptible context.
This went unnoticed as compilers hoist the access into the non-preemptible
region where the pointer is actually used. But of course it's valid that
the compiler keeps it at the place where the code puts it which rightfully
triggers:
BUG: using smp_processor_id() in preemptible [00000000] code:
caller is hotplug_cpu__broadcast_tick_pull+0x1c/0xc0
Move it to the actual usage site which is in a non-preemptible region.
Fixes: f7d43dd206e7 ("tick/broadcast: Make takeover of broadcast hrtimer reliable")
Reported-by: David Wang <00107082@163.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yu Liao <liaoyu15@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ttg56ers.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Sat Aug 3 17:07:51 2024 +0200
timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex()
commit 5916be8a53de6401871bdd953f6c60237b47d6d3 upstream.
The addition of the bases argument to clock_was_set() fixed up all call
sites correctly except for do_adjtimex(). This uses CLOCK_REALTIME
instead of CLOCK_SET_WALL as argument. CLOCK_REALTIME is 0.
As a result the effect of that clock_was_set() notification is incomplete
and might result in timers expiring late because the hrtimer code does
not re-evaluate the affected clock bases.
Use CLOCK_SET_WALL instead of CLOCK_REALTIME to tell the hrtimers code
which clock bases need to be re-evaluated.
Fixes: 17a1b8826b45 ("hrtimer: Add bases argument to clock_was_set()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/877ccx7igo.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon Jun 3 15:25:23 2024 -0300
tools headers arm64: Sync arm64's cputype.h with the kernel sources
commit dc6abbbde4b099e936cd5428e196d86a5e119aae upstream.
To get the changes in:
0ce85db6c2141b7f ("arm64: cputype: Add Neoverse-V3 definitions")
02a0a04676fa7796 ("arm64: cputype: Add Cortex-X4 definitions")
f4d9d9dcc70b96b5 ("arm64: Add Neoverse-V2 part")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch add MIDR_NEOVERSE_V[23] and
MIDR_NEOVERSE_V1 is used in arm-spe.c, so probably we need to add those
and perhaps MIDR_CORTEX_X4 to that array? Or maybe we need to leave this
for later when this is all tested on those machines?
static const struct midr_range neoverse_spe[] = {
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
{},
};
Mark Rutland recommended about arm-spe.c:
"I would not touch this for now -- someone would have to go audit the
TRMs to check that those other cores have the same encoding, and I think
it'd be better to do that as a follow-up."
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/Zl8cYk0Tai2fs7aM@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mathias Krause <minipli@grsecurity.net>
Date: Wed Aug 7 13:51:38 2024 +0200
tracefs: Fix inode allocation
commit 0df2ac59bebfac221463ef57ed3554899b41d75f upstream.
The leading comment above alloc_inode_sb() is pretty explicit about it:
/*
* This must be used for allocating filesystems specific inodes to set
* up the inode reclaim context correctly.
*/
Switch tracefs over to alloc_inode_sb() to make sure inodes are properly
linked.
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20240807115143.45927-2-minipli@grsecurity.net
Fixes: ba37ff75e04b ("eventfs: Implement tracefs_inode_cache")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Wed Aug 7 18:54:02 2024 -0400
tracefs: Use generic inode RCU for synchronizing freeing
commit 0b6743bd60a56a701070b89fb80c327a44b7b3e2 upstream.
With structure layout randomization enabled for 'struct inode' we need to
avoid overlapping any of the RCU-used / initialized-only-once members,
e.g. i_lru or i_sb_list to not corrupt related list traversals when making
use of the rcu_head.
For an unlucky structure layout of 'struct inode' we may end up with the
following splat when running the ftrace selftests:
[<...>] list_del corruption, ffff888103ee2cb0->next (tracefs_inode_cache+0x0/0x4e0 [slab object]) is NULL (prev is tracefs_inode_cache+0x78/0x4e0 [slab object])
[<...>] ------------[ cut here ]------------
[<...>] kernel BUG at lib/list_debug.c:54!
[<...>] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[<...>] CPU: 3 PID: 2550 Comm: mount Tainted: G N 6.8.12-grsec+ #122 ed2f536ca62f28b087b90e3cc906a8d25b3ddc65
[<...>] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[<...>] RIP: 0010:[<ffffffff84656018>] __list_del_entry_valid_or_report+0x138/0x3e0
[<...>] Code: 48 b8 99 fb 65 f2 ff ff ff ff e9 03 5c d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff e9 33 5a d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff <0f> 0b 4c 89 e9 48 89 ea 48 89 ee 48 c7 c7 60 8f dd 89 31 c0 e8 2f
[<...>] RSP: 0018:fffffe80416afaf0 EFLAGS: 00010283
[<...>] RAX: 0000000000000098 RBX: ffff888103ee2cb0 RCX: 0000000000000000
[<...>] RDX: ffffffff84655fe8 RSI: ffffffff89dd8b60 RDI: 0000000000000001
[<...>] RBP: ffff888103ee2cb0 R08: 0000000000000001 R09: fffffbd0082d5f25
[<...>] R10: fffffe80416af92f R11: 0000000000000001 R12: fdf99c16731d9b6d
[<...>] R13: 0000000000000000 R14: ffff88819ad4b8b8 R15: 0000000000000000
[<...>] RBX: tracefs_inode_cache+0x0/0x4e0 [slab object]
[<...>] RDX: __list_del_entry_valid_or_report+0x108/0x3e0
[<...>] RSI: __func__.47+0x4340/0x4400
[<...>] RBP: tracefs_inode_cache+0x0/0x4e0 [slab object]
[<...>] RSP: process kstack fffffe80416afaf0+0x7af0/0x8000 [mount 2550 2550]
[<...>] R09: kasan shadow of process kstack fffffe80416af928+0x7928/0x8000 [mount 2550 2550]
[<...>] R10: process kstack fffffe80416af92f+0x792f/0x8000 [mount 2550 2550]
[<...>] R14: tracefs_inode_cache+0x78/0x4e0 [slab object]
[<...>] FS: 00006dcb380c1840(0000) GS:ffff8881e0600000(0000) knlGS:0000000000000000
[<...>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[<...>] CR2: 000076ab72b30e84 CR3: 000000000b088004 CR4: 0000000000360ef0 shadow CR4: 0000000000360ef0
[<...>] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[<...>] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[<...>] ASID: 0003
[<...>] Stack:
[<...>] ffffffff818a2315 00000000f5c856ee ffffffff896f1840 ffff888103ee2cb0
[<...>] ffff88812b6b9750 0000000079d714b6 fffffbfff1e9280b ffffffff8f49405f
[<...>] 0000000000000001 0000000000000000 ffff888104457280 ffffffff8248b392
[<...>] Call Trace:
[<...>] <TASK>
[<...>] [<ffffffff818a2315>] ? lock_release+0x175/0x380 fffffe80416afaf0
[<...>] [<ffffffff8248b392>] list_lru_del+0x152/0x740 fffffe80416afb48
[<...>] [<ffffffff8248ba93>] list_lru_del_obj+0x113/0x280 fffffe80416afb88
[<...>] [<ffffffff8940fd19>] ? _atomic_dec_and_lock+0x119/0x200 fffffe80416afb90
[<...>] [<ffffffff8295b244>] iput_final+0x1c4/0x9a0 fffffe80416afbb8
[<...>] [<ffffffff8293a52b>] dentry_unlink_inode+0x44b/0xaa0 fffffe80416afbf8
[<...>] [<ffffffff8293fefc>] __dentry_kill+0x23c/0xf00 fffffe80416afc40
[<...>] [<ffffffff8953a85f>] ? __this_cpu_preempt_check+0x1f/0xa0 fffffe80416afc48
[<...>] [<ffffffff82949ce5>] ? shrink_dentry_list+0x1c5/0x760 fffffe80416afc70
[<...>] [<ffffffff82949b71>] ? shrink_dentry_list+0x51/0x760 fffffe80416afc78
[<...>] [<ffffffff82949da8>] shrink_dentry_list+0x288/0x760 fffffe80416afc80
[<...>] [<ffffffff8294ae75>] shrink_dcache_sb+0x155/0x420 fffffe80416afcc8
[<...>] [<ffffffff8953a7c3>] ? debug_smp_processor_id+0x23/0xa0 fffffe80416afce0
[<...>] [<ffffffff8294ad20>] ? do_one_tree+0x140/0x140 fffffe80416afcf8
[<...>] [<ffffffff82997349>] ? do_remount+0x329/0xa00 fffffe80416afd18
[<...>] [<ffffffff83ebf7a1>] ? security_sb_remount+0x81/0x1c0 fffffe80416afd38
[<...>] [<ffffffff82892096>] reconfigure_super+0x856/0x14e0 fffffe80416afd70
[<...>] [<ffffffff815d1327>] ? ns_capable_common+0xe7/0x2a0 fffffe80416afd90
[<...>] [<ffffffff82997436>] do_remount+0x416/0xa00 fffffe80416afdd0
[<...>] [<ffffffff829b2ba4>] path_mount+0x5c4/0x900 fffffe80416afe28
[<...>] [<ffffffff829b25e0>] ? finish_automount+0x13a0/0x13a0 fffffe80416afe60
[<...>] [<ffffffff82903812>] ? user_path_at_empty+0xb2/0x140 fffffe80416afe88
[<...>] [<ffffffff829b2ff5>] do_mount+0x115/0x1c0 fffffe80416afeb8
[<...>] [<ffffffff829b2ee0>] ? path_mount+0x900/0x900 fffffe80416afed8
[<...>] [<ffffffff8272461c>] ? __kasan_check_write+0x1c/0xa0 fffffe80416afee0
[<...>] [<ffffffff829b31cf>] __do_sys_mount+0x12f/0x280 fffffe80416aff30
[<...>] [<ffffffff829b36cd>] __x64_sys_mount+0xcd/0x2e0 fffffe80416aff70
[<...>] [<ffffffff819f8818>] ? syscall_trace_enter+0x218/0x380 fffffe80416aff88
[<...>] [<ffffffff8111655e>] x64_sys_call+0x5d5e/0x6720 fffffe80416affa8
[<...>] [<ffffffff8952756d>] do_syscall_64+0xcd/0x3c0 fffffe80416affb8
[<...>] [<ffffffff8100119b>] entry_SYSCALL_64_safe_stack+0x4c/0x87 fffffe80416affe8
[<...>] </TASK>
[<...>] <PTREGS>
[<...>] RIP: 0033:[<00006dcb382ff66a>] vm_area_struct[mount 2550 2550 file 6dcb38225000-6dcb3837e000 22 55(read|exec|mayread|mayexec)]+0x0/0xb8 [userland map]
[<...>] Code: 48 8b 0d 29 18 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f6 17 0d 00 f7 d8 64 89 01 48
[<...>] RSP: 002b:0000763d68192558 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[<...>] RAX: ffffffffffffffda RBX: 00006dcb38433264 RCX: 00006dcb382ff66a
[<...>] RDX: 000017c3e0d11210 RSI: 000017c3e0d1a5a0 RDI: 000017c3e0d1ae70
[<...>] RBP: 000017c3e0d10fb0 R08: 000017c3e0d11260 R09: 00006dcb383d1be0
[<...>] R10: 000000000020002e R11: 0000000000000246 R12: 0000000000000000
[<...>] R13: 000017c3e0d1ae70 R14: 000017c3e0d11210 R15: 000017c3e0d10fb0
[<...>] RBX: vm_area_struct[mount 2550 2550 file 6dcb38433000-6dcb38434000 5b 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] RCX: vm_area_struct[mount 2550 2550 file 6dcb38225000-6dcb3837e000 22 55(read|exec|mayread|mayexec)]+0x0/0xb8 [userland map]
[<...>] RDX: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] RSI: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] RDI: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] RBP: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] RSP: vm_area_struct[mount 2550 2550 anon 763d68173000-763d68195000 7ffffffdd 100133(read|write|mayread|maywrite|growsdown|account)]+0x0/0xb8 [userland map]
[<...>] R08: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] R09: vm_area_struct[mount 2550 2550 file 6dcb383d1000-6dcb383d3000 1cd 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] R13: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] R14: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] R15: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map]
[<...>] </PTREGS>
[<...>] Modules linked in:
[<...>] ---[ end trace 0000000000000000 ]---
The list debug message as well as RBX's symbolic value point out that the
object in question was allocated from 'tracefs_inode_cache' and that the
list's '->next' member is at offset 0. Dumping the layout of the relevant
parts of 'struct tracefs_inode' gives the following:
struct tracefs_inode {
union {
struct inode {
struct list_head {
struct list_head * next; /* 0 8 */
struct list_head * prev; /* 8 8 */
} i_lru;
[...]
} vfs_inode;
struct callback_head {
void (*func)(struct callback_head *); /* 0 8 */
struct callback_head * next; /* 8 8 */
} rcu;
};
[...]
};
Above shows that 'vfs_inode.i_lru' overlaps with 'rcu' which will
destroy the 'i_lru' list as soon as the 'rcu' member gets used, e.g. in
call_rcu() or later when calling the RCU callback. This will disturb
concurrent list traversals as well as object reuse which assumes these
list heads will keep their integrity.
For reproduction, the following diff manually overlays 'i_lru' with
'rcu' as, otherwise, one would require some good portion of luck for
gambling an unlucky RANDSTRUCT seed:
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -629,6 +629,7 @@ struct inode {
umode_t i_mode;
unsigned short i_opflags;
kuid_t i_uid;
+ struct list_head i_lru; /* inode LRU list */
kgid_t i_gid;
unsigned int i_flags;
@@ -690,7 +691,6 @@ struct inode {
u16 i_wb_frn_avg_time;
u16 i_wb_frn_history;
#endif
- struct list_head i_lru; /* inode LRU list */
struct list_head i_sb_list;
struct list_head i_wb_list; /* backing dev writeback list */
union {
The tracefs inode does not need to supply its own RCU delayed destruction
of its inode. The inode code itself offers both a "destroy_inode()"
callback that gets called when the last reference of the inode is
released, and the "free_inode()" which is called after a RCU
synchronization period from the "destroy_inode()".
The tracefs code can unlink the inode from its list in the destroy_inode()
callback, and the simply free it from the free_inode() callback. This
should provide the same protection.
Link: https://lore.kernel.org/all/20240807115143.45927-3-minipli@grsecurity.net/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Ilkka =?utf-8?b?TmF1bGFww6TDpA==?= <digirigawa@gmail.com>
Link: https://lore.kernel.org/20240807185402.61410544@gandalf.local.home
Fixes: baa23a8d4360 ("tracefs: Reset permissions on remount if permissions are options")
Reported-by: Mathias Krause <minipli@grsecurity.net>
Reported-by: Brad Spengler <spender@grsecurity.net>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Date: Mon Aug 5 13:59:22 2024 +0800
tracing: Fix overflow in get_free_elt()
commit bcf86c01ca4676316557dd482c8416ece8c2e143 upstream.
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.
Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt".
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map")
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Link: https://lore.kernel.org/20240805055922.6277-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Roman Smirnov <r.smirnov@omp.ru>
Date: Thu Jun 20 10:24:13 2024 +0300
udf: prevent integer overflow in udf_bitmap_free_blocks()
[ Upstream commit 56e69e59751d20993f243fb7dd6991c4e522424c ]
An overflow may occur if the function is called with the last
block and an offset greater than zero. It is necessary to add
a check to avoid this.
Found by Linux Verification Center (linuxtesting.org) with Svace.
[JK: Make test cover also unalloc table freeing]
Link: https://patch.msgid.link/20240620072413.7448-1-r.smirnov@omp.ru
Suggested-by: Jan Kara <jack@suse.com>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chris Wulff <crwulff@gmail.com>
Date: Wed Jul 24 21:04:20 2024 -0400
usb: gadget: core: Check for unset descriptor
commit 973a57891608a98e894db2887f278777f564de18 upstream.
Make sure the descriptor has been set before looking at maxpacket.
This fixes a null pointer panic in this case.
This may happen if the gadget doesn't properly set up the endpoint
for the current speed, or the gadget descriptors are malformed and
the descriptor for the speed/endpoint are not found.
No current gadget driver is known to have this problem, but this
may cause a hard-to-find bug during development of new gadgets.
Fixes: 54f83b8c8ea9 ("USB: gadget: Reject endpoints with 0 maxpacket value")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20240725010419.314430-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Wed Jul 17 11:50:53 2024 +0200
usb: gadget: midi2: Fix the response for FB info with block 0xff
commit 228a953e61d6d608a3facc1c3a27b9fb03c99de7 upstream.
When the block number 0xff is given to Function Block Discovery
message, the device should return the information of all Function
Blocks, but currently the gadget driver treats it as an error.
Implement the proper behavior for the block 0xff instead.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240717095102.10493-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chris Wulff <crwulff@gmail.com>
Date: Sun Jul 21 15:23:15 2024 -0400
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
commit 76a7bfc445b8e9893c091e24ccfd4f51dfdc0a70 upstream.
These functions can fail if descriptors are malformed, or missing,
for the selected USB speed.
Fixes: eb9fecb9e69b ("usb: gadget: f_uac2: split out audio core")
Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20240721192314.3532697-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Prashanth K <quic_prashk@quicinc.com>
Date: Tue Jul 30 18:27:54 2024 +0530
usb: gadget: u_serial: Set start_delayed during suspend
commit 5a444bea37e2759549ef72bfe83d1c8712e76b3d upstream.
Upstream commit aba3a8d01d62 ("usb: gadget: u_serial: add suspend
resume callbacks") added started_delayed flag, so that new ports
which are opened after USB suspend can start IO while resuming.
But if the port was already opened, and gadget suspend kicks in
afterwards, start_delayed will never be set. This causes resume
to bail out before calling gs_start_io(). Fix this by setting
start_delayed during suspend.
Fixes: aba3a8d01d62 ("usb: gadget: u_serial: add suspend resume callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20240730125754.576326-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Date: Mon Jul 15 12:44:53 2024 +0200
USB: serial: debug: do not echo input by default
commit 00af4f3dda1461ec90d892edc10bec6d3c50c554 upstream.
This driver is intended as a "client" end of the console connection.
When connected to a host it's supposed to receive debug logs, and
possibly allow to interact with whatever debug console is available
there. Feeding messages back, depending on a configuration may cause log
messages be executed as shell commands (which can be really bad if one
is unlucky, imagine a log message like "prevented running `rm -rf
/home`"). In case of Xen, it exposes sysrq-like debug interface, and
feeding it its own logs will pretty quickly hit 'R' for "instant
reboot".
Contrary to a classic serial console, the USB one cannot be configured
ahead of time, as the device shows up only when target OS is up. And at
the time device is opened to execute relevant ioctl, it's already too
late, especially when logs start flowing shortly after device is
initialized.
Avoid the issue by changing default to no echo for this type of devices.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
[ johan: amend summary; disable also ECHONL ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Tue Jul 9 13:38:41 2024 +0200
usb: vhci-hcd: Do not drop references before new references are gained
commit afdcfd3d6fcdeca2735ca8d994c5f2d24a368f0a upstream.
At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240709113851.14691-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Wang <jasowang@redhat.com>
Date: Mon Jul 1 11:31:59 2024 +0800
vhost-vdpa: switch to use vmf_insert_pfn() in the fault handler
commit 0823dc64586ba5ea13a7d200a5d33e4c5fa45950 upstream.
remap_pfn_page() should not be called in the fault handler as it may
change the vma->flags which may trigger lockdep warning since the vma
write lock is not held. Actually there's no need to modify the
vma->flags as it has been set in the mmap(). So this patch switches to
use vmf_insert_pfn() instead.
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240701033159.18133-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kang Yang <quic_kangyang@quicinc.com>
Date: Fri Dec 1 18:09:47 2023 +0200
wifi: ath12k: add CE and ext IRQ flag to indicate irq_handler
[ Upstream commit 604308a34487eaa382c50fcdb4396c435030b4fa ]
Add two flags to indicate whether IRQ handler for CE and DP can be called.
This is because in one MSI vector case, interrupt is not disabled in
hif_stop and hif_irq_disable. So if interrupt is disabled, MHI interrupt
is disabled too.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-3-quic_kangyang@quicinc.com
Stable-dep-of: a47f3320bb4b ("wifi: ath12k: fix soft lockup on suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baochen Qiang <quic_bqiang@quicinc.com>
Date: Sun May 26 20:42:26 2024 +0800
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
[ Upstream commit 3d60041543189438cd1b03a1fa40ff6681c77970 ]
Currently the resource allocated by crypto_alloc_shash() is not
freed in case ath12k_peer_find() fails, resulting in memory leak.
Add crypto_free_shash() to fix it.
This is found during code review, compile tested only.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240526124226.24661-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Tue Jul 9 09:31:32 2024 +0200
wifi: ath12k: fix soft lockup on suspend
[ Upstream commit a47f3320bb4ba6714abe8dddb36399367b491358 ]
The ext interrupts are enabled when the firmware has been started, but
this may never happen, for example, if the board configuration file is
missing.
When the system is later suspended, the driver unconditionally tries to
disable interrupts, which results in an irq disable imbalance and causes
the driver to spin indefinitely in napi_synchronize().
Make sure that the interrupts have been enabled before attempting to
disable them.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Date: Wed Oct 18 21:00:08 2023 +0530
wifi: ath12k: rename the sc naming convention to ab
[ Upstream commit cda8607e824b8f4f1e5f26fef17736c8be4358f8 ]
In PCI and HAL interface layer module, the identifier sc is used
to represent an instance of ath12k_base structure. However,
within ath12k, the convention is to use "ab" to represent an SoC
"base" struct. So change the all instances of sc to ab.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231018153008.29820-3-quic_periyasa@quicinc.com
Stable-dep-of: a47f3320bb4b ("wifi: ath12k: fix soft lockup on suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Wed May 15 14:16:00 2024 +0200
wifi: nl80211: disallow setting special AP channel widths
[ Upstream commit 23daf1b4c91db9b26f8425cc7039cf96d22ccbfe ]
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that.
Reported-by: syzbot+bc0f5b92cc7091f45fb6@syzkaller.appspotmail.com
Link: https://msgid.link/20240515141600.d4a9590bfe32.I19a32d60097e81b527eafe6b0924f6c5fbb2dc45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Thu Jun 27 10:44:11 2024 +0200
wifi: nl80211: don't give key data to userspace
[ Upstream commit a7e5793035792cc46a1a4b0a783655ffa897dfe9 ]
When a key is requested by userspace, there's really no need
to include the key data, the sequence counter is really what
userspace needs in this case. The fact that it's included is
just a historic quirk.
Remove the key data.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627104411.b6a4f097e4ea.I7e6cc976cb9e8a80ef25a3351330f313373b4578@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Zijlstra <peterz@infradead.org>
Date: Thu Aug 1 12:42:25 2024 +0200
x86/mm: Fix pti_clone_entry_text() for i386
[ Upstream commit 3db03fb4995ef85fc41e86262ead7b4852f4bcf0 ]
While x86_64 has PMD aligned text sections, i386 does not have this
luxery. Notably ALIGN_ENTRY_TEXT_END is empty and _etext has PAGE
alignment.
This means that text on i386 can be page granular at the tail end,
which in turn means that the PTI text clones should consistently
account for this.
Make pti_clone_entry_text() consistent with pti_clone_kernel_text().
Fixes: 16a3fe634f6a ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Zijlstra <peterz@infradead.org>
Date: Wed Jul 31 18:31:05 2024 +0200
x86/mm: Fix pti_clone_pgtable() alignment assumption
[ Upstream commit 41e71dbb0e0a0fe214545fe64af031303a08524c ]
Guenter reported dodgy crashes on an i386-nosmp build using GCC-11
that had the form of endless traps until entry stack exhaust and then
#DF from the stack guard.
It turned out that pti_clone_pgtable() had alignment assumptions on
the start address, notably it hard assumes start is PMD aligned. This
is true on x86_64, but very much not true on i386.
These assumptions can cause the end condition to malfunction, leading
to a 'short' clone. Guess what happens when the user mapping has a
short copy of the entry text?
Use the correct increment form for addr to avoid alignment
assumptions.
Fixes: 16a3fe634f6a ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240731163105.GG33588@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andi Kleen <ak@linux.intel.com>
Date: Wed Aug 7 17:02:44 2024 -0700
x86/mtrr: Check if fixed MTRRs exist before saving them
commit 919f18f961c03d6694aa726c514184f2311a4614 upstream.
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this.
Fixes: 2b1f6278d77c ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chen Yu <yu.c.chen@intel.com>
Date: Tue Aug 6 19:22:07 2024 +0800
x86/paravirt: Fix incorrect virt spinlock setting on bare metal
commit e639222a51196c69c70b49b67098ce2f9919ed08 upstream.
The kernel can change spinlock behavior when running as a guest. But this
guest-friendly behavior causes performance problems on bare metal.
The kernel uses a static key to switch between the two modes.
In theory, the static key is enabled by default (run in guest mode) and
should be disabled for bare metal (and in some guests that want native
behavior or paravirt spinlock).
A performance drop is reported when running encode/decode workload and
BenchSEE cache sub-workload.
Bisect points to commit ce0a1b608bfc ("x86/paravirt: Silence unused
native_pv_lock_init() function warning"). When CONFIG_PARAVIRT_SPINLOCKS is
disabled the virt_spin_lock_key is incorrectly set to true on bare
metal. The qspinlock degenerates to test-and-set spinlock, which decreases
the performance on bare metal.
Set the default value of virt_spin_lock_key to false. If booting in a VM,
enable this key. Later during the VM initialization, if other
high-efficient spinlock is preferred (e.g. paravirt-spinlock), or the user
wants the native qspinlock (via nopvspin boot commandline), the
virt_spin_lock_key is disabled accordingly.
This results in the following decision matrix:
X86_FEATURE_HYPERVISOR Y Y Y N
CONFIG_PARAVIRT_SPINLOCKS Y Y N Y/N
PV spinlock Y N N Y/N
virt_spin_lock_key N Y/N Y N
Fixes: ce0a1b608bfc ("x86/paravirt: Silence unused native_pv_lock_init() function warning")
Reported-by: Prem Nath Dey <prem.nath.dey@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Suggested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Suggested-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240806112207.29792-1-yu.c.chen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Viresh Kumar <viresh.kumar@linaro.org>
Date: Tue Jun 18 15:12:28 2024 +0530
xen: privcmd: Switch from mutex to spinlock for irqfds
[ Upstream commit 1c682593096a487fd9aebc079a307ff7a6d054a3 ]
irqfd_wakeup() gets EPOLLHUP, when it is called by
eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which
gets called under spin_lock_irqsave(). We can't use a mutex here as it
will lead to a deadlock.
Fix it by switching over to a spin lock.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/a66d7a7a9001424d432f52a9fc3931a1f345464f.1718703669.git.viresh.kumar@linaro.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christoph Hellwig <hch@lst.de>
Date: Tue Apr 30 06:07:55 2024 +0200
xfs: fix log recovery buffer allocation for the legacy h_size fixup
commit 45cf976008ddef4a9c9a30310c9b4fb2a9a6602a upstream.
Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by
mkfs") added a fixup for incorrect h_size values used for the initial
umount record in old xfsprogs versions. Later commit 0c771b99d6c9
("xfs: clean up calculation of LR header blocks") cleaned up the log
reover buffer calculation, but stoped using the fixed up h_size value
to size the log recovery buffer, which can lead to an out of bounds
access when the incorrect h_size does not come from the old mkfs
tool, but a fuzzer.
Fix this by open coding xlog_logrec_hblks and taking the fixed h_size
into account for this calculation.
Fixes: 0c771b99d6c9 ("xfs: clean up calculation of LR header blocks")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Kevin Berry <kpberry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>