The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

HBA_GetFcpPersistentBinding (3)
  • >> HBA_GetFcpPersistentBinding (3) ( Solaris man: Библиотечные вызовы )
  •  

    NAME

    HBA_GetFcpPersistentBinding, HBA_GetPersistentBindingV2, HBA_SetPersistentBindingV2, HBA_RemovePersistentBinding, HBA_RemoveAllPersistentBindings - handle persistent bindings between FCP-2 discovered devices and operating system SCSI information
     
    

    SYNOPSIS

    cc [ flag... ] file... -lHBAAPI [ library... ]
    #include <hbaapi.h>
    
    HBA_STATUS HBA_GetFcpPersistentBinding(HBA_HANDLE handle,
        HBA_FCPBINDING *binding);
    

    HBA_STATUS HBA_GetPersistentBindingV2(HBA_HANDLE handle,
        HBA_WWN hbaPortWWN, HBA_FCPBINDING2 *binding);
    

    HBA_STATUS HBA_SetPersistentBindingV2(HBA_HANDLE handle,
        HBA_WWN hbaPortWWN, HBA_FCPBINDING2 *binding);
    

    HBA_STATUS HBA_RemovePersistentBinding(HBA_HANDLE handle,
        HBA_WWN hbaPortWWN, HBA_FCPBINDING2 *binding);
    

    HBA_STATUS HBA_RemoveAllPersistentBindings(HBA_HANDLE handle,
        HBA_WWN hbaPortWWN);
    

     

    PARAMETERS

    handle

    an open handle returned from HBA_OpenAdapter(3HBAAPI)

    binding

    HBA_GetFcpPersistentBinding()

    a buffer to store the binding entries in. The binding->NumberOfEntries member must indicate the maximum number of entries that fit within the buffer. On completion, the binding->NumberOfEntries member will indicate the actual number of binding entries for the HBA. This value can be greater than the number of entries the buffer can store.

    HBA_GetPersistentBindingV2()

    a pointer to a HBA_FCPBINDING2 structure. The NumberOfEntries member will be the maximum number of entries returned.

    HBA_SetPersistentBindingV2()

    a pointer to a HBA_FCPBINDING2 structure. The NumberOfEntries member will be the number of bindings requested in the structure.

    HBA_RemovePersistentBinding()

    a pointer to a HBA_FCPBINDING2 structure. The structure will contain all the bindings to be removed. The NumberOfEntries member will be the number of bindings being requested to be removed in the structure.

    hbaPortWWN

    HBA_GetPersistentBindingV2()

    The Port WWN of the local HBA through which persistent bindings will be retrieved.

    HBA_SetPersistentBindingV2()

    The Port WWN of the local HBA through which persistent bindings will be set.

    HBA_RemovePersistentBinding()
    HBA_RemoveAllPersistentBindings()

    The Port WWN of the local HBA through which persistent bindings will be removed.

     

    DESCRIPTION

    The HBA_GetFcpPersistentBinding() function retrieves the set of mappings between FCP LUNs and SCSI LUNs that are reestablished upon initialization or reboot. The means of establishing the persistent bindings is vendor-specific and accomplished outside the scope of the HBA API.

    The HBA_GetPersistentBindingV2() function retrieves the set of persistent bindings between FCP LUNs and SCSI LUNs for the specified HBA Port that are reestablished upon initialization or reboot. The means of establishing the persistent bindings is vendor-specific and accomplished outside the scope of the HBA API. The binding information can contain bindings to Logical Unit Unique Device Identifiers.

    The HBA_SetPersistentBindingV2() function sets additional persistent bindings between FCP LUNs and SCSI LUNs for the specified HBA Port. It can also accept bindings to Logical Unit Unique Device Identifiers. Bindings already set will remain set. An error occurs if a request is made to bind to an OS SCSI ID which has already been bound. Persistent bindings will not affect Target Mappings until the OS, HBA, and/or Fabric has been reinitialized. Before then, the effects are not specified.

    The HBA_RemovePersistentBinding() function removes one or more persistent bindings. The persistent binding will only be removed if both the OS SCSI LUN and the SCSI Lun match a binding specifed in the arguments. Persistent bindings removed will not affect Target Mappings until the OS, HBA, and/or Fabric has been reinitialized. Before then, the effects are not specified.

    The HBA_RemoveAllPersistentBindings() function removes all persistent bindings. Persistent bindings removed will not affect Target Mappings until the OS, HBA, and/or Fabric has been reinitialized. Before then, the effects are not specified.  

    RETURN VALUES

    The HBA_GetFcpPersistentBinding() function returns the following values:

    HBA_STATUS_OK

    The HBA was able to retrieve information.

    HBA_STATUS_ERROR_MORE_DATA

    A a larger buffer is required. The value of binding->NumberOfEntries after the call indicates the total number of entries available. The caller should reallocate a larger buffer to accomodate the indicated number of entries and reissue the routine.

    HBA_STATUS_ERROR_NOT_SUPPORTED

    The HBA handle specified by handle does not support persistent binding.

    In the event that other error codes are returned, the value of binding->NumberOfEntries after the call should be checked, and if greater than the value before the call, a larger buffer should be allocated for a retry of the routine.

    The HBA_GetPersistentBindingV2() function returns the following values:

    HBA_STATUS_OK

    The HBA was able to retrieve information.

    HBA_STATUS_ERROR_MORE_DATA

    A a larger buffer is required. The value of binding->NumberOfEntries after the call indicates the total number of entries available. The caller should reallocate a larger buffer to accomodate the indicated number of entries and reissue the routine.

    HBA_STATUS_ERROR_ILLEGAL_WWN

    The Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle.

    HBA_STATUS_ERROR_NOT_SUPPORTED

    The HBA handle specified by handle does not support persistent binding.

    The value of binding remains unchanged. The structure it points to contains binding information. The number of entries returned is the minimum between the number of entries specifed in the binding argument and the total number of bindings.

    The HBA_SetPersistentBindingV2() function returns the following values.

    HBA_STATUS_OK

    The HBA was able to set bindings.

    HBA_STATUS_ERROR_ILLEGAL_WWN

    The Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle.

    HBA_STATUS_ERROR_NOT_SUPPORTED

    The HBA handle specified by handle does not support persistent binding.

    The value of binding remains unchanged. The success or failure of each Persistent binding set is indicated in the Status member of the HBA_FCPBINDINGENTRY2 structure.

    The HBA_RemovePersistentBinding() function returns the following values:

    HBA_STATUS_OK

    The HBA was able to retrieve information.

    HBA_STATUS_ERROR_ILLEGAL_WWN

    The Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle.

    HBA_STATUS_ERROR_NOT_SUPPORTED

    The HBA handle specified by handle does not support persistent binding.

    The value of binding remains unchanged. The success or failure of each Persistent binding set is indicated in the Status member of the HBA_FCPBINDINGENTRY2 structure.

    The HBA_RemoveAllPersistentBindings() function returns the following values:

    HBA_STATUS_OK

    The HBA was able to retrieve information.

    HBA_STATUS_ERROR_ILLEGAL_WWN

    The Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle.

    HBA_STATUS_ERROR_NOT_SUPPORTED

    The HBA handle specified by handle does not support persistent binding.

     

    ERRORS

    See libhbaapi(3LIB) for general error status values.  

    ATTRIBUTES

    See attributes(5) for descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE

    Interface StabilityStandard: FC-MI 1.92 (API version 1)


    MT-Level

     

    SEE ALSO

    HBA_GetFcpTargetMapping(3HBAAPI), HBA_OpenAdapter(3HBAAPI), libhbaapi(3LIB), attributes(5)

    T11 FC-MI Specification  

    BUGS

    The HBA_GetFcpTargetMapping(3HBAAPI) and HBA_GetFcpPersistentBinding() functions do not take a portindex to define to which port of a multi-ported HBA the command should apply. The behavior on multi-ported HBAs is vendor-specific and could result in mappings or bindings for all ports being intermixed in the response buffer. SNIA version 2 defines a HBA_GetFcpTargetMappingV2() that takes a Port WWN as an argument. This fixes the bug with multi-ported HBAs in HBA_GetFcpTargetMapping().


     

    Index

    NAME
    SYNOPSIS
    PARAMETERS
    DESCRIPTION
    RETURN VALUES
    ERRORS
    ATTRIBUTES
    SEE ALSO
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру