The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

dad (7)
  • >> dad (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    dad - driver for IDE disk devices
     
    

    SYNOPSIS

    dad@ target,lun:partition 
    

     

    DESCRIPTION

    This driver handles the ide disk drives on SPARC platforms. The type of disk drive is determined using the ATA IDE identify device command and by reading the volume label stored on the drive. The dad device driver supports the Solaris SPARC VTOC and the EFI/GPT disk volume labels.

    The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A single read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmitted. The names of the block files are found in /dev/dsk. Raw file names are found in /dev/rdsk.

    I/O requests to the raw device must be aligned on a 512-byte (DEV_BSIZE) boundary and must have a length that is a multiple of 512 bytes. Requests that do not meet the restrictions cause the driver to return an EINVAL error. I/O requests to the block device have no alignment or length restrictions.  

    Device Statistics Support

    Each device maintains I/O statistics both for the device and for each partition allocated on that device. For each device/partition, the driver accumulates reads, writes, bytes read, and bytes written. The driver also takes hi-resolution time stamps at queue entry and exit points, which facilitates monitoring the residence time and cumulative residence-length product for each queue.

    Each device also has error statistics associated with it. These must include counters for hard errors, soft errors and transport errors. Other data may be implemented as required.  

    FILES

    /dev/dsk/cntndnsn

    block files

    /dev/rdsk/cntndnsn

    raw files

    where:

    cn

    controller n

    tn

    IDE target id n (0-3)

    dn

    Always 0.

    sn

    partition n (0-7)

    The target ide numbers are assigned as:

    0

    Master disk on Primary channel.

    1

    Slave disk on Primary channel.

    2

    Master disk on Secondary channel

    3

    Slave disk on Secondary channel.

     

    IOCTLS

    Refer to dkio(7I).  

    ERRORS

    EACCES

    Permission denied.

    EBUSY

    The partition was opened exclusively by another thread.

    EFAULT

    Argument was a bad address.

    EINVAL

    Invalid argument.

    EIO


     I/O error occurred.

    ENOTTY

    The device does not support the requested ioctl function.

    ENXIO

    The device did not exist during opening.

    EROFS

    The device is a read-only device.

     

    SEE ALSO

    format(1M), mount(1M), lseek(2), read(2), write(2), driver.conf(4), vfstab(4), dkio(7I)

    X3T10 ATA-4 specifications.  

    DIAGNOSTICS

    Command:<number>, Error:<number>, Status:<number>

    Indicates that the command failed with an error and provides status register contents. Where <number> is a hexadecimal value.

    offline

    The driver has decided that the target disk is no longer there.

    disk ok

    The target disk is now responding again.

    disk not responding to selection

    The target disk is not responding.

    i/o to invalid geometry

    The geometry of the drive could not be established.

    incomplete read/write - retrying/giving up

    There was a residue after the command completed normally.

    no bp for disk label

    A bp with consistent memory could not be allocated.

    no memory for disk label

    Free memory pool exhausted.

    ATA transport failed: reason 'nnnn': {retrying|giving}

    The host adapter has failed to transport a command to the target for the reason stated. The driver will either retry the command or, ultimately, give up.

    no mem for property

    Free memory pool exhausted.

    transport rejected (<n>)

    Host adapter driver was unable to accept a command.

    Device Fault

    Device fault - reason for such error is vendor specific.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Device Statistics Support
    FILES
    IOCTLS
    ERRORS
    SEE ALSO
    DIAGNOSTICS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру