The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

locale (5)
  • locale (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • locale (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • locale (1) ( Русские man: Команды и прикладные программы пользовательского уровня )
  • locale (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  • locale (1) ( POSIX man: Команды и прикладные программы пользовательского уровня )
  • locale (3) ( Linux man: Библиотечные вызовы )
  • >> locale (5) ( Solaris man: Форматы файлов )
  • locale (5) ( Русские man: Форматы файлов )
  • locale (5) ( Linux man: Форматы файлов )
  • locale (7) ( Русские man: Макропакеты и соглашения )
  • locale (7) ( Linux man: Макропакеты и соглашения )
  • Ключ locale обнаружен в базе ключевых слов.
  •  

    NAME

    locale - subset of a user's environment that depends on language and cultural conventions
     
    

    DESCRIPTION

    A locale is the definition of the subset of a user's environment that depends on language and cultural conventions. It is made up from one or more categories. Each category is identified by its name and controls specific aspects of the behavior of components of the system. Category names correspond to the following environment variable names:

    LC_CTYPE

    Character classification and case conversion.

    LC_COLLATE

    Collation order.

    LC_TIME

    Date and time formats.

    LC_NUMERIC

    Numeric formatting.

    LC_MONETARY

    Monetary formatting.

    LC_MESSAGES

    Formats of informative and diagnostic messages and interactive responses.

    The standard utilities base their behavior on the current locale, as defined in the ENVIRONMENT VARIABLES section for each utility. The behavior of some of the C-language functions will also be modified based on the current locale, as defined by the last call to setlocale(3C).

    Locales other than those supplied by the implementation can be created by the application via the localedef(1) utility. The value that is used to specify a locale when using environment variables will be the string specified as the name operand to localedef when the locale was created. The strings "C" and "POSIX" are reserved as identifiers for the POSIX locale.

    Applications can select the desired locale by invoking the setlocale() function with the appropriate value. If the function is invoked with an empty string, such as:

    setlocale(LC_ALL, "");
    

    the value of the corresponding environment variable is used. If the environment variable is unset or is set to the empty string, the setlocale() function sets the appropriate environment.  

    Locale Definition

    Locales can be described with the file format accepted by the localedef utility.

    The locale definition file must contain one or more locale category source definitions, and must not contain more than one definition for the same locale category.

    A category source definition consists of a category header, a category body and a category trailer. A category header consists of the character string naming of the category, beginning with the characters LC_. The category trailer consists of the string END, followed by one or more blank characters and the string used in the corresponding category header.

    The category body consists of one or more lines of text. Each line contains an identifier, optionally followed by one or more operands. Identifiers are either keywords, identifying a particular locale element, or collating elements. Each keyword within a locale must have a unique name (that is, two categories cannot have a commonly-named keyword). No keyword can start with the characters LC_. Identifiers must be separated from the operands by one or more blank characters.

    Operands must be characters, collating elements, or strings of characters. Strings must be enclosed in double-quotes ("). Literal double-quotes within strings must be preceded by the <escape character>, as described below. When a keyword is followed by more than one operand, the operands must be separated by semicolons (;). Blank characters are allowed both before and after a semicolon.

    The first category header in the file can be preceded by a line modifying the comment character. It has the following format, starting in column 1:

    "comment_char %c\n",<comment character>
    

    The comment character defaults to the number sign (#). Blank lines and lines containing the <comment character> in the first position are ignored.

    The first category header in the file can be preceded by a line modifying the escape character to be used in the file. It has the following format, starting in column 1:

    "escape_char %c\n",<escape character>
    

    The escape character defaults to backslash.

    A line can be continued by placing an escape character as the last character on the line; this continuation character will be discarded from the input. Although the implementation need not accept any one portion of a continued line with a length exceeding {LINE_MAX} bytes, it places no limits on the accumulated length of the continued line. Comment lines cannot be continued on a subsequent line using an escaped newline character.

    Individual characters, characters in strings, and collating elements must be represented using symbolic names, as defined below. In addition, characters can be represented using the characters themselves or as octal, hexadecimal or decimal constants. When non-symbolic notation is used, the resultant locale definitions will in many cases not be portable between systems. The left angle bracket (<) is a reserved symbol, denoting the start of a symbolic name; when used to represent itself it must be preceded by the escape character. The following rules apply to character representation:

    1.
    A character can be represented via a symbolic name, enclosed within angle brackets < and >. The symbolic name, including the angle brackets, must exactly match a symbolic name defined in the charmap file specified via the localedef -f option, and will be replaced by a character value determined from the value associated with the symbolic name in the charmap file. The use of a symbolic name not found in the charmap file constitutes an error, unless the category is LC_CTYPE or LC_COLLATE, in which case it constitutes a warning condition (see localedef(1) for a description of action resulting from errors and warnings). The specification of a symbolic name in a collating-element or collating-symbol section that duplicates a symbolic name in the charmap file (if present) is an error. Use of the escape character or a right angle bracket within a symbolic name is invalid unless the character is preceded by the escape character.

    Example:

    <C>;<c-cedilla> "<M><a><y>" 
    

    2.
    A character can be represented by the character itself, in which case the value of the character is implementation-dependent. Within a string, the double-quote character, the escape character and the right angle bracket character must be escaped (preceded by the escape character) to be interpreted as the character itself. Outside strings, the characters

    ,     ;     <     >     escape_char
    

    must be escaped to be interpreted as the character itself.

    Example:

    c       "May"
    

    3.
    A character can be represented as an octal constant. An octal constant is specified as the escape character followed by two or more octal digits. Each constant represents a byte value. Multi-byte values can be represented by concatenated constants specified in byte order with the last constant specifying the least significant byte of the character.

    Example:

    \143;\347;\143\150    "\115\141\171"
    

    4.
    A character can be represented as a hexadecimal constant. A hexadecimal constant is specified as the escape character followed by an x followed by two or more hexadecimal digits. Each constant represents a byte value. Multi-byte values can be represented by concatenated constants specified in byte order with the last constant specifying the least significant byte of the character.

    Example:

    \x63;\xe7;\x63\x68    "\x4d\x61\x79"
    

    5.
    A character can be represented as a decimal constant. A decimal constant is specified as the escape character followed by a d followed by two or more decimal digits. Each constant represents a byte value. Multi-byte values can be represented by concatenated constants specified in byte order with the last constant specifying the least significant byte of the character.

    Example:

    \d99;\d231;\d99\d104   "\d77\d97\d121"
    

    Only characters existing in the character set for which the locale definition is created can be specified, whether using symbolic names, the characters themselves, or octal, decimal or hexadecimal constants. If a charmap file is present, only characters defined in the charmap can be specified using octal, decimal or hexadecimal constants. Symbolic names not present in the charmap file can be specified and will be ignored, as specified under item 1 above.

     

    LC_CTYPE

    The LC_CTYPE category defines character classification, case conversion and other character attributes. In addition, a series of characters can be represented by three adjacent periods representing an ellipsis symbol (...). The ellipsis specification is interpreted as meaning that all values between the values preceding and following it represent valid characters. The ellipsis specification is valid only within a single encoded character set, that is, within a group of characters of the same size. An ellipsis is interpreted as including in the list all characters with an encoded value higher than the encoded value of the character preceding the ellipsis and lower than the encoded value of the character following the ellipsis.

    Example:

    \x30;...;\x39;
    

    includes in the character class all characters with encoded values between the endpoints.

    The following keywords are recognized. In the descriptions, the term ``automatically included'' means that it is not an error either to include or omit any of the referenced characters.

    The character classes digit, xdigit, lower, upper, and space have a set of automatically included characters. These only need to be specified if the character values (that is, encoding) differ from the implementation default values.

    upper

    Define characters to be classified as upper-case letters.

    In the POSIX locale, the 26 upper-case letters are included:

    A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
    

    In a locale definition file, no character specified for the keywords cntrl, digit, punct, or space can be specified. The upper-case letters A to Z are automatically included in this class.

    lower

    Define characters to be classified as lower-case letters. In the POSIX locale, the 26 lower-case letters are included:

    a b c d e f g h i j k l m n o p q r s t u v w x y z
    

    In a locale definition file, no character specified for the keywords cntrl, digit, punct, or space can be specified. The lower-case letters a to z of the portable character set are automatically included in this class.

    alpha

    Define characters to be classified as letters.

    In the POSIX locale, all characters in the classes upper and lower are included.

    In a locale definition file, no character specified for the keywords cntrl, digit, punct, or space can be specified. Characters classified as either upper or lower are automatically included in this class.

    digit

    Define the characters to be classified as numeric digits.

    In the POSIX locale, only

    0 1 2 3 4 5 6 7 8 9
    

    are included.

    In a locale definition file, only the digits 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9 can be specified, and in contiguous ascending sequence by numerical value. The digits 0 to 9 of the portable character set are automatically included in this class.

    The definition of character class digit requires that only ten characters; the ones defining digits can be specified; alternative digits (for example, Hindi or Kanji) cannot be specified here.

    alnum

    Define characters to be classified as letters and numeric digits. Only the characters specified for the alpha and digit keywords are specified. Characters specified for the keywords alpha and digit are automatically included in this class.

    space

    Define characters to be classified as white-space characters.

    In the POSIX locale, at a minimum, the characters SPACE, FORMFEED, NEWLINE, CARRIAGE RETURN, TAB, and VERTICAL TAB are included.

    In a locale definition file, no character specified for the keywords upper, lower, alpha, digit, graph, or xdigit can be specified. The characters SPACE, FORMFEED, NEWLINE, CARRIAGE RETURN, TAB, and VERTICAL TAB of the portable character set, and any characters included in the class blank are automatically included in this class.

    cntrl

    Define characters to be classified as control characters.

    In the POSIX locale, no characters in classes alpha or print are included.

    In a locale definition file, no character specified for the keywords upper, lower, alpha, digit, punct, graph, print, or xdigit can be specified.

    punct

    Define characters to be classified as punctuation characters.

    In the POSIX locale, neither the space character nor any characters in classes alpha, digit, or cntrl are included.

    In a locale definition file, no character specified for the keywords upper, lower, alpha, digit, cntrl, xdigit or as the space character can be specified.

    graph

    Define characters to be classified as printable characters, not including the space character.

    In the POSIX locale, all characters in classes alpha, digit, and punct are included; no characters in class cntrl are included.

    In a locale definition file, characters specified for the keywords upper, lower, alpha, digit, xdigit, and punct are automatically included in this class. No character specified for the keyword cntrl can be specified.

    print

    Define characters to be classified as printable characters, including the space character.

    In the POSIX locale, all characters in class graph are included; no characters in class cntrl are included.

    In a locale definition file, characters specified for the keywords upper, lower, alpha, digit, xdigit, punct, and the space character are automatically included in this class. No character specified for the keyword cntrl can be specified.

    xdigit

    Define the characters to be classified as hexadecimal digits.

    In the POSIX locale, only:

    0 1 2 3 4 5 6 7 8 9 A B C D E F a b c d e f
    

    are included.

    In a locale definition file, only the characters defined for the class digit can be specified, in contiguous ascending sequence by numerical value, followed by one or more sets of six characters representing the hexadecimal digits 10 to 15 inclusive, with each set in ascending order (for example A, B, C, D, E, F, a, b, c, d, e, f). The digits 0 to 9, the upper-case letters A to F and the lower-case letters a to f of the portable character set are automatically included in this class.

    The definition of character class xdigit requires that the characters included in character class digit be included here also.

    blank

    Define characters to be classified as blank characters.

    In the POSIX locale, only the space and tab characters are included.

    In a locale definition file, the characters space and tab are automatically included in this class.

    charclass

    Define one or more locale-specific character class names as strings separated by semi-colons. Each named character class can then be defined subsequently in the LC_CTYPE definition. A character class name consists of at least one and at most {CHARCLASS_NAME_MAX} bytes of alphanumeric characters from the portable filename character set. The first character of a character class name cannot be a digit. The name cannot match any of the LC_CTYPE keywords defined in this document.

    charclass-name

    Define characters to be classified as belonging to the named locale-specific character class. In the POSIX locale, the locale-specific named character classes need not exist. If a class name is defined by a charclass keyword, but no characters are subsequently assigned to it, this is not an error; it represents a class without any characters belonging to it. The charclass-name can be used as the property argument to the wctype(3C) function, in regular expression and shell pattern-matching bracket expressions, and by the tr(1) command.

    toupper

    Define the mapping of lower-case letters to upper-case letters.

    In the POSIX locale, at a minimum, the 26 lower-case characters:

    a b c d e f g h i j k l m n o p q r s t u v w x y z
    

    are mapped to the corresponding 26 upper-case characters:

    A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
    

    In a locale definition file, the operand consists of character pairs, separated by semicolons. The characters in each character pair are separated by a comma and the pair enclosed by parentheses. The first character in each pair is the lower-case letter, the second the corresponding upper-case letter. Only characters specified for the keywords lower and upper can be specified. The lower-case letters a to z, and their corresponding upper-case letters A to Z, of the portable character set are automatically included in this mapping, but only when the toupper keyword is omitted from the locale definition.

    tolower

    Define the mapping of upper-case letters to lower-case letters.

    In the POSIX locale, at a minimum, the 26 upper-case characters:

    A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
    

    are mapped to the corresponding 26 lower-case characters:

    a b c d e f g h i j k l m n o p q r s t u v w x y z
    

    In a locale definition file, the operand consists of character pairs, separated by semicolons. The characters in each character pair are separated by a comma and the pair enclosed by parentheses. The first character in each pair is the upper-case letter, the second the corresponding lower-case letter. Only characters specified for the keywords lower and upper can be specified. If the tolower keyword is omitted from the locale definition, the mapping will be the reverse mapping of the one specified for toupper.

     

    LC_COLLATE

    The LC_COLLATE category provides a collation sequence definition for numerous utilities (such as sort(1), uniq(1), and so forth), regular expression matching (see regex(5)), and the strcoll(3C), strxfrm(3C), wcscoll(3C), and wcsxfrm(3C) functions.

    A collation sequence definition defines the relative order between collating elements (characters and multi-character collating elements) in the locale. This order is expressed in terms of collation values, that is, by assigning each element one or more collation values (also known as collation weights). The following capabilities are provided:

    1.
    Multi-character collating elements. Specification of multi-character collating elements (that is, sequences of two or more characters to be collated as an entity).
    2.
    User-defined ordering of collating elements. Each collating element is assigned a collation value defining its order in the character (or basic) collation sequence. This ordering is used by regular expressions and pattern matching and, unless collation weights are explicity specified, also as the collation weight to be used in sorting.
    3.
    Multiple weights and equivalence classes. Collating elements can be assigned one or more (up to the limit {COLL_WEIGHTS_MAX} ) collating weights for use in sorting. The first weight is hereafter referred to as the primary weight.
    4.
    One-to-Many mapping. A single character is mapped into a string of collating elements.
    5.
    Equivalence class definition. Two or more collating elements have the same collation value (primary weight).
    6.
    Ordering by weights. When two strings are compared to determine their relative order, the two strings are first broken up into a series of collating elements. The elements in each successive pair of elements are then compared according to the relative primary weights for the elements. If equal, and more than one weight has been assigned, the pairs of collating elements are recompared according to the relative subsequent weights, until either a pair of collating elements compare unequal or the weights are exhausted.

    The following keywords are recognized in a collation sequence definition. They are described in detail in the following sections.

    copy

    Specify the name of an existing locale which is used as the definition of this category. If this keyword is specified, no other keyword is specified.

    collating-element

    Define a collating-element symbol representing a multi-character collating element. This keyword is optional.

    collating-symbol

    Define a collating symbol for use in collation order statements. This keyword is optional.

    order_start

    Define collation rules. This statement is followed by one or more collation order statements, assigning character collation values and collation weights to collating elements.

    order_end

    Specify the end of the collation-order statements.

     

    collating-element keyword

    In addition to the collating elements in the character set, the collating-element keyword is used to define multi-character collating elements. The syntax is:

    "collating-element %s from \"%s\"\n",<collating-symbol>,<string>
    

    The <collating-symbol> operand is a symbolic name, enclosed between angle brackets (< and >), and must not duplicate any symbolic name in the current charmap file (if any), or any other symbolic name defined in this collation definition. The string operand is a string of two or more characters that collates as an entity. A <collating-element> defined via this keyword is only recognized with the LC_COLLATE category.

    Example:
    collating-element <ch> from "<c><h>"
    collating-element <e-acute> from "<acute><e>"
    collating-element <ll> from "ll"  

    collating-symbol keyword

    This keyword will be used to define symbols for use in collation sequence statements; that is, between the order_start and the order_end keywords. The syntax is:

    "collating-symbol %s\n",<collating-symbol>
    

    The <collating-symbol> is a symbolic name, enclosed between angle brackets (< and >), and must not duplicate any symbolic name in the current charmap file (if any), or any other symbolic name defined in this collation definition.

    A collating-symbol defined via this keyword is only recognized with the LC_COLLATE category.

    Example:
    collating-symbol <UPPER_CASE>
    collating-symbol <HIGH>

    The collating-symbol keyword defines a symbolic name that can be associated with a relative position in the character order sequence. While such a symbolic name does not represent any collating element, it can be used as a weight.  

    order_start keyword

    The order_start keyword must precede collation order entries and also defines the number of weights for this collation sequence definition and other collation rules.

    The syntax of the order_start keyword is:

    "order_start %s;%s;...;%s\n",<sort-rules>,<sort-rules>
    

    The operands to the order_start keyword are optional. If present, the operands define rules to be applied when strings are compared. The number of operands define how many weights each element is assigned. If no operands are present, one forward operand is assumed. If present, the first operand defines rules to be applied when comparing strings using the first (primary) weight; the second when comparing strings using the second weight, and so on. Operands are separated by semicolons (;). Each operand consists of one or more collation directives, separated by commas (,). If the number of operands exceeds the {COLL_WEIGHTS_MAX} limit, the utility will issue a warning message. The following directives will be supported:

    forward

    Specifies that comparison operations for the weight level proceed from start of string towards the end of string.

    backward

    Specifies that comparison operations for the weight level proceed from end of string towards the beginning of string.

    position

    Specifies that comparison operations for the weight level will consider the relative position of elements in the strings not subject to IGNORE. The string containing an element not subject to IGNORE after the fewest collating elements subject to IGNORE from the start of the compare will collate first. If both strings contain a character not subject to IGNORE in the same relative position, the collating values assigned to the elements will determine the ordering. In case of equality, subsequent characters not subject to IGNORE are considered in the same manner.

    The directives forward and backward are mutually exclusive.

    Example:

    order_start     forward;backward
    

    If no operands are specified, a single forward operand is assumed.  

    Collation Order

    The order_start keyword is followed by collating identifier entries. The syntax for the collating element entries is:

    "%s %s;%s;...;%s\n"<collating-identifier>,<weight>,<weight>,...
    

    Each collating-identifier consists of either a character described in Locale Definition above, a <collating-element>, a <collating-symbol>, an ellipsis, or the special symbol UNDEFINED. The order in which collating elements are specified determines the character order sequence, such that each collating element compares less than the elements following it. The NUL character compares lower than any other character.

    A <collating-element> is used to specify multi-character collating elements, and indicates that the character sequence specified via the <collating-element> is to be collated as a unit and in the relative order specified by its place.

    A <collating-symbol> is used to define a position in the relative order for use in weights. No weights are specified with a <collating-symbol>.

    The ellipsis symbol specifies that a sequence of characters will collate according to their encoded character values. It is interpreted as indicating that all characters with a coded character set value higher than the value of the character in the preceding line, and lower than the coded character set value for the character in the following line, in the current coded character set, will be placed in the character collation order between the previous and the following character in ascending order according to their coded character set values. An initial ellipsis is interpreted as if the preceding line specified the NUL character, and a trailing ellipsis as if the following line specified the highest coded character set value in the current coded character set. An ellipsis is treated as invalid if the preceding or following lines do not specify characters in the current coded character set. The use of the ellipsis symbol ties the definition to a specific coded character set and may preclude the definition from being portable beween implementations.

    The symbol UNDEFINED is interpreted as including all coded character set values not specified explicitly or via the ellipsis symbol. Such characters are inserted in the character collation order at the point indicated by the symbol, and in ascending order according to their coded character set values. If no UNDEFINED symbol is specified, and the current coded character set contains characters not specified in this section, the utility will issue a warning message and place such characters at the end of the character collation order.

    The optional operands for each collation-element are used to define the primary, secondary, or subsequent weights for the collating element. The first operand specifies the relative primary weight, the second the relative secondary weight, and so on. Two or more collation-elements can be assigned the same weight; they belong to the same equivalence class if they have the same primary weight. Collation behaves as if, for each weight level, elements subject to IGNORE are removed, unless the position collation directive is specified for the corresponding level with the order_start keyword. Then each successive pair of elements is compared according to the relative weights for the elements. If the two strings compare equal, the process is repeated for the next weight level, up to the limit {COLL_WEIGHTS_MAX}.

    Weights are expressed as characters described in Locale Definition above, <collating-symbol>s, <collating-element>s, an ellipsis, or the special symbol IGNORE. A single character, a <collating-symbol> or a <collating-element> represent the relative position in the character collating sequence of the character or symbol, rather than the character or characters themselves. Thus, rather than assigning absolute values to weights, a particular weight is expressed using the relative order value assigned to a collating element based on its order in the character collation sequence.

    One-to-many mapping is indicated by specifying two or more concatenated characters or symbolic names. For example, if the character <eszet> is given the string "<s><s>" as a weight, comparisons are performed as if all occurrences of the character <eszet> are replaced by <s><s> (assuming that <s> has the collating weight <s>). If it is necessary to define <eszet> and <s><s> as an equivalence class, then a collating element must be defined for the string ss.

    All characters specified via an ellipsis will by default be assigned unique weights, equal to the relative order of characters. Characters specified via an explicit or implicit UNDEFINED special symbol will by default be assigned the same primary weight (that is, belong to the same equivalence class). An ellipsis symbol as a weight is interpreted to mean that each character in the sequence has unique weights, equal to the relative order of their character in the character collation sequence. The use of the ellipsis as a weight is treated as an error if the collating element is neither an ellipsis nor the special symbol UNDEFINED.

    The special keyword IGNORE as a weight indicates that when strings are compared using the weights at the level where IGNORE is specified, the collating element is ignored; that is, as if the string did not contain the collating element. In regular expressions and pattern matching, all characters that are subject to IGNORE in their primary weight form an equivalence class.

    An empty operand is interpreted as the collating element itself.

    For example, the order statement:

    <a>      <a>;<a>
    

    is equal to:

    <a>
    

    An ellipsis can be used as an operand if the collating element was an ellipsis, and is interpreted as the value of each character defined by the ellipsis.

    The collation order as defined in this section defines the interpretation of bracket expressions in regular expressions.

    Example:

    order_startforward;backward
    UNDEFINEDIGNORE;IGNORE
    <LOW>
    <space>
    ...
    <a>
    <a-acute>
    <a-grave>
    <A>
    <A-acute>
    <A-grave>
    <ch>
    <Ch>
    <s>
    <eszet>
    order_end

    This example is interpreted as follows:

    1.
    The UNDEFINED means that all characters not specified in this definition (explicitly or via the ellipsis) are ignored for collation purposes; for regular expression purposes they are ordered first.
    2.
    All characters between <space> and <a> have the same primary equivalence class and individual secondary weights based on their ordinal encoded values.
    3.
    All characters based on the upper- or lower-case character a belong to the same primary equivalence class.
    4.
    The multi-character collating element <ch> is represented by the collating symbol <ch> and belongs to the same primary equivalence class as the multi-character collating element <Ch>.
     

    order_end keyword

    The collating order entries must be terminated with an order_end keyword.  

    LC_MONETARY

    The LC_MONETARY category defines the rules and symbols that are used to format monetary numeric information. This information is available through the localeconv(3C) function

    The following items are defined in this category of the locale. The item names are the keywords recognized by the localedef(1) utility when defining a locale. They are also similar to the member names of the lconv structure defined in <locale.h>. The localeconv function returns {CHAR_MAX} for unspecified integer items and the empty string ("") for unspecified or size zero string items.

    In a locale definition file the operands are strings. For some keywords, the strings can contain only integers. Keywords that are not provided, string values set to the empty string (""), or integer keywords set to -1, are used to indicate that the value is not available in the locale.

    int_curr_symbol

    The international currency symbol. The operand is a four-character string, with the first three characters containing the alphabetic international currency symbol in accordance with those specified in the ISO 4217 standard. The fourth character is the character used to separate the international currency symbol from the monetary quantity.

    currency_symbol

    The string used as the local currency symbol.

    mon_decimal_point

    The operand is a string containing the symbol that is used as the decimal delimiter (radix character) in monetary formatted quantities.

    mon_thousands_sep

    The operand is a string containing the symbol that is used as a separator for groups of digits to the left of the decimal delimiter in formatted monetary quantities.

    mon_grouping

    Define the size of each group of digits in formatted monetary quantities. The operand is a sequence of integers separated by semicolons. Each integer specifies the number of digits in each group, with the initial integer defining the size of the group immediately preceding the decimal delimiter, and the following integers defining the preceding groups. If the last integer is not -1, then the size of the previous group (if any) will be repeatedly used for the remainder of the digits. If the last integer is -1, then no further grouping will be performed.

    The following is an example of the interpretation of the mon_grouping keyword. Assuming that the value to be formatted is 123456789 and the mon_thousands_sep is ', then the following table shows the result. The third column shows the equivalent string in the ISO C standard that would be used by the localeconv function to accommodate this grouping.

    mon_grouping   Formatted Value  ISO C String
    
    3;-1           123456'789       "\3\177"
    3              123'456'789      "\3"
    3;2;-1         1234'56'789      "\3\2\177"
    3;2            12'34'56'789     "\3\2"
    -1             1234567898       "\177"
    

    In these examples, the octal value of {CHAR_MAX} is 177.

    positive_sign

    A string used to indicate a non-negative-valued formatted monetary quantity.

    negative_sign

    A string used to indicate a negative-valued formatted monetary quantity.

    int_frac_digits

    An integer representing the number of fractional digits (those to the right of the decimal delimiter) to be written in a formatted monetary quantity using int_curr_symbol.

    frac_digits

    An integer representing the number of fractional digits (those to the right of the decimal delimiter) to be written in a formatted monetary quantity using currency_symbol.

    p_cs_precedes

    In an application conforming to the SUSv3 standard, an integer set to 1 if the currency_symbol precedes the value for a monetary quantity with a non-negative value, and set to 0 if the symbol succeeds the value.

    In an application not conforming to the SUSv3 standard, an integer set to 1 if the currency_symbol or int_currency_symbol precedes the value for a monetary quantity with a non-negative value, and set to 0 if the symbol succeeds the value.

    p_sep_by_space

    In an application conforming to the SUSv3 standard, an integer set to 0 if no space separates the currency_symbol from the value for a monetary quantity with a non-negative value, set to 1 if a space separates the symbol from the value, and set to 2 if a space separates the symbol and the sign string, if adjacent.

    In an application not conforming to the SUSv3 standard, an integer set to 0 if no space separates the currency_symbol or int_curr_symbol from the value for a monetary quantity with a non-negative value, set to 1 if a space separates the symbol from the value, and set to 2 if a space separates the symbol and the sign string, if adjacent.

    n_cs_precedes

    In an application conforming to the SUSv3 standard, an integer set to 1 if the currency_symbol precedes the value for a monetary quantity with a negative value, and set to 0 if the symbol succeeds the value.

    In an application not conforming to the SUSv3 standard, an integer set to 1 if the currency_symbol or int_currency_symbol precedes the value for a monetary quantity with a negative value, and set to 0 if the symbol succeeds the value.

    n_sep_by_space

    In an application conforming to the SUSv3 standard, an integer set to 0 if no space separates the currency_symbol from the value for a monetary quantity with a negative value, set to 1 if a space separates the symbol from the value, and set to 2 if a space separates the symbol and the sign string, if adjacent.

    In an application not conforming to the SUSv3 standard, an integer set to 0 if no space separates the currency_symbol or int_curr_symbol from the value for a monetary quantity with a negative value, set to 1 if a space separates the symbol from the value, and set to 2 if a space separates the symbol and the sign string, if adjacent.

    p_sign_posn

    An integer set to a value indicating the positioning of the positive_sign for a monetary quantity with a non-negative value. The following integer values are recognized for both p_sign_posn and n_sign_posn:

    In an application conforming to the SUSv3 standard:

    0

    Parentheses enclose the quantity and the currency_symbol.

    1

    The sign string precedes the quantity and the currency_symbol.

    2

    The sign string succeeds the quantity and the currency_symbol.

    3

    The sign string precedes the currency_symbol.

    4

    The sign string succeeds the currency_symbol.

    In an application not conforming to the SUSv3 standard:

    0

    Parentheses enclose the quantity and the currency_symbol or int_curr_symbol.

    1

    The sign string precedes the quantity and the currency_symbol or int_curr_symbol.

    2

    The sign string succeeds the quantity and the currency_symbol or int_curr_symbol.

    3

    The sign string precedes the currency_symbol or int_curr_symbol.

    4

    The sign string succeeds the currency_symbol or int_curr_symbol.

    n_sign_posn

    An integer set to a value indicating the positioning of the negative_sign for a negative formatted monetary quantity.

    int_p_cs_precedes

    An integer set to 1 if the int_curr_symbol precedes the value for a monetary quantity with a non-negative value, and set to 0 if the symbol succeeds the value.

    int_n_cs_precedes

    An integer set to 1 if the int_curr_symbol precedes the value for a monetary quantity with a negative value, and set to 0 if the symbol succeeds the value.

    int_p_sep_by_space

    An integer set to 0 if no space separates the int_curr_symbol from the value for a monetary quantity with a non-negative value, set to 1 if a space separates the symbol from the value, and set to 2 if a space separates the symbol and the sign string, if adjacent.

    int_n_sep_by_space

    An integer set to 0 if no space separates the int_curr_symbol from the value for a monetary quantity with a negative value, set to 1 if a space separates the symbol from the value, and set to 2 if a space separates the symbol and the sign string, if adjacent.

    int_p_sign_posn

    An integer set to a value indicating the positioning of the positive_sign for a positive monetary quantity formatted with the international format. The following integer values are recognized for int_p_sign_posn and int_n_sign_posn:

    0

    Parentheses enclose the quantity and the int_curr_symbol.

    1

    The sign string precedes the quantity and the int_curr_symbol.

    2

    The sign string precedes the quantity and the int_curr_symbol.

    3

    The sign string precedes the int_curr_symbol.

    4

    The sign string succeeds the int_curr_symbol.

    int_n_sign_posn

    An integer set to a value indicating the positioning of the negative_sign for a negative monetary quantity formatted with the international format.

    The following table shows the result of various combinations:

    p_sep_by_space
    210
    p_cs_precedes= 1
    p_cs_precedes= 0

    The monetary formatting definitions for the POSIX locale follow. The code listing depicts the localedef(1) input, the table representing the same information with the addition of localeconv(3C) and nl_langinfo(3C) formats. All values are unspecified in the POSIX locale.

    LC_MONETARY
    # This is the POSIX locale definition for
    # the LC_MONETARY category.
    #
    int_curr_symbol       ""
    currency_symbol       ""
    mon_decimal_point     ""
    mon_thousands_sep     ""
    mon_grouping          -1
    positive_sign         ""
    negative_sign         ""
    int_frac_digits       -1
    frac_digits           -1
    p_cs_precedes         -1
    p_sep_by_space        -1
    n_cs_precedes         -1
    n_sep_by_space        -1
    p_sign_posn           -1
    n_sign_posn           -1
    int_p_cs_precedes     -1
    int_p_sep_by_space    -1
    int_n_cs_precedes     -1
    int_n_sep_by_space    -1
    int_p_sign_posn       -1
    int_n_sign_posn       -1
    #
    END LC_MONETARY
    

    The entry n/a indicates that the value is not available in the POSIX locale.  

    LC_NUMERIC

    The LC_NUMERIC category defines the rules and symbols that will be used to format non-monetary numeric information. This information is available through the localeconv(3C) function.

    The following items are defined in this category of the locale. The item names are the keywords recognized by the localedef utility when defining a locale. They are also similar to the member names of the lconv structure defined in <locale.h>. The localeconv() function returns {CHAR_MAX} for unspecified integer items and the empty string ("") for unspecified or size zero string items.

    In a locale definition file the operands are strings. For some keywords, the strings only can contain integers. Keywords that are not provided, string values set to the empty string (""), or integer keywords set to -1, will be used to indicate that the value is not available in the locale. The following keywords are recognized:

    decimal_point

    The operand is a string containing the symbol that is used as the decimal delimiter (radix character) in numeric, non-monetary formatted quantities. This keyword cannot be omitted and cannot be set to the empty string. In contexts where standards limit the decimal_point to a single byte, the result of specifying a multi-byte operand is unspecified.

    thousands_sep

    The operand is a string containing the symbol that is used as a separator for groups of digits to the left of the decimal delimiter in numeric, non-monetary formatted monetary quantities. In contexts where standards limit the thousands_sep to a single byte, the result of specifying a multi-byte operand is unspecified.

    grouping

    Define the size of each group of digits in formatted non-monetary quantities. The operand is a sequence of integers separated by semicolons. Each integer specifies the number of digits in each group, with the initial integer defining the size of the group immediately preceding the decimal delimiter, and the following integers defining the preceding groups. If the last integer is not -1, then the size of the previous group (if any) will be repeatedly used for the remainder of the digits. If the last integer is -1, then no further grouping will be performed. The non-monetary numeric formatting definitions for the POSIX locale follow. The code listing depicts the localedef input, the table representing the same information with the addition of localeconv values, and nl_langinfo constants.

    LC_NUMERIC
    # This is the POSIX locale definition for
    # the LC_NUMERIC category.
    #
    decimal_point   "<period>"
    thousands_sep   ""
    grouping        -1
    #
    END LC_NUMERIC
    

    POSIX localelanginfolocaleconv()localedef
    ItemValueConstantValueValue

    decimal_point
    thousands_sep
    grouping

    The entry n/a indicates that the value is not available in the POSIX locale.  

    LC_TIME

    The LC_TIME category defines the interpretation of the field descriptors supported by date(1) and affects the behavior of the strftime(3C), wcsftime(3C), strptime(3C), and nl_langinfo(3C) functions. Because the interfaces for C-language access and locale definition differ significantly, they are described separately. For locale definition, the following mandatory keywords are recognized:

    abday

    Define the abbreviated weekday names, corresponding to the %a field descriptor (conversion specification in the strftime(), wcsftime(), and strptime() functions). The operand consists of seven semicolon-separated strings, each surrounded by double-quotes. The first string is the abbreviated name of the day corresponding to Sunday, the second the abbreviated name of the day corresponding to Monday, and so on.

    day

    Define the full weekday names, corresponding to the %A field descriptor. The operand consists of seven semicolon-separated strings, each surrounded by double-quotes. The first string is the full name of the day corresponding to Sunday, the second the full name of the day corresponding to Monday, and so on.

    abmon

    Define the abbreviated month names, corresponding to the %b field descriptor. The operand consists of twelve semicolon-separated strings, each surrounded by double-quotes. The first string is the abbreviated name of the first month of the year (January), the second the abbreviated name of the second month, and so on.

    mon

    Define the full month names, corresponding to the %B field descriptor. The operand consists of twelve semicolon-separated strings, each surrounded by double-quotes. The first string is the full name of the first month of the year (January), the second the full name of the second month, and so on.

    d_t_fmt

    Define the appropriate date and time representation, corresponding to the %c field descriptor. The operand consists of a string, and can contain any combination of characters and field descriptors. In addition, the string can contain the escape sequences \\, \a, \b, \f, \n, \r, \t, \v.

    date_fmt

    Define the appropriate date and time representation, corresponding to the %C field descriptor. The operand consists of a string, and can contain any combination of characters and field descriptors. In addition, the string can contain the escape sequences \\, \a, \b, \f, \n, \r, \t, \v.

    d_fmt

    Define the appropriate date representation, corresponding to the %x field descriptor. The operand consists of a string, and can contain any combination of characters and field descriptors. In addition, the string can contain the escape sequences \\, \a, \b, \f, \n, \r, \t, \v.

    t_fmt

    Define the appropriate time representation, corresponding to the %X field descriptor. The operand consists of a string, and can contain any combination of characters and field descriptors. In addition, the string can contain the escape sequences \\, \a, \b, \f, \n, \r, \t, \v.

    am_pm

    Define the appropriate representation of the ante meridiem and post meridiem strings, corresponding to the %p field descriptor. The operand consists of two strings, separated by a semicolon, each surrounded by double-quotes. The first string represents the ante meridiem designation, the last string the post meridiem designation.

    t_fmt_ampm

    Define the appropriate time representation in the 12-hour clock format with am_pm, corresponding to the %r field descriptor. The operand consists of a string and can contain any combination of characters and field descriptors. If the string is empty, the 12-hour format is not supported in the locale.

    era

    Define how years are counted and displayed for each era in a locale. The operand consists of semicolon-separated strings. Each string is an era description segment with the format:

    direction:offset:start_date:end_date:era_name:era_format

    according to the definitions below. There can be as many era description segments as are necessary to describe the different eras.

    The start of an era might not be the earliest point For example, the Christian era B.C. starts on the day before January 1, A.D. 1, and increases with earlier time.

    direction

    Either a + or a - character. The + character indicates that years closer to the start_date have lower numbers than those closer to the end_date. The - character indicates that years closer to the start_date have higher numbers than those closer to the end_date.

    offset

    The number of the year closest to the start_date in the era, corresponding to the %Eg and %Ey field descriptors.

    start_date

    A date in the form yyyy/mm/dd, where yyyy, mm, and dd are the year, month and day numbers respectively of the start of the era. Years prior to A.D. 1 are represented as negative numbers.

    end_date

    The ending date of the era, in the same format as the start_date, or one of the two special values -* or +*. The value -* indicates that the ending date is the beginning of time. The value +* indicates that the ending date is the end of time.

    era_name

    A string representing the name of the era, corresponding to the %EC field descriptor.

    era_format

    A string for formatting the year in the era, corresponding to the %EG and %EY field descriptors.

    era_d_fmt

    Define the format of the date in alternative era notation, corresponding to the %Ex field descriptor.

    era_t_fmt

    Define the locale's appropriate alternative time format, corresponding to the %EX field descriptor.

    era_d_t_fmt

    Define the locale's appropriate alternative date and time format, corresponding to the %Ec field descriptor.

    alt_digits

    Define alternative symbols for digits, corresponding to the %O field descriptor modifier. The operand consists of semicolon-separated strings, each surrounded by double-quotes. The first string is the alternative symbol corresponding with zero, the second string the symbol corresponding with one, and so on. Up to 100 alternative symbol strings can be specified. The %O modifier indicates that the string corresponding to the value specified via the field descriptor will be used instead of the value.

     

    LC_TIME C-language Access

    The following information can be accessed. These correspond to constants defined in <langinfo.h> and used as arguments to the nl_langinfo(3C) function.

    ABDAY_x

    The abbreviated weekday names (for example Sun), where x is a number from 1 to 7.

    DAY_x

    The full weekday names (for example Sunday), where x is a number from 1 to 7.

    ABMON_x

    The abbreviated month names (for example Jan), where x is a number from 1 to 12.

    MON_x

    The full month names (for example January), where x is a number from 1 to 12.

    D_T_FMT

    The appropriate date and time representation.

    D_FMT

    The appropriate date representation.

    T_FMT

    The appropriate time representation.

    AM_STR

    The appropriate ante-meridiem affix.

    PM_STR

    The appropriate post-meridiem affix.

    T_FMT_AMPM

    The appropriate time representation in the 12-hour clock format with AM_STR and PM_STR.

    ERA

    The era description segments, which describe how years are counted and displayed for each era in a locale. Each era description segment has the format:

    direction:offset:start_date:end_date:era_name:era_format
    

    according to the definitions below. There will be as many era description segments as are necessary to describe the different eras. Era description segments are separated by semicolons.

    The start of an era might not be the earliest point For example, the Christian era B.C. starts on the day before January 1, A.D. 1, and increases with earlier time.

    direction

    Either a + or a - character. The + character indicates that years closer to the start_date have lower numbers than those closer to the end_date. The - character indicates that years closer to the start_date have higher numbers than those closer to the end_date.

    offset

    The number of the year closest to the start_date in the era.

    start_date

    A date in the form yyyy/mm/dd, where yyyy, mm, and dd are the year, month and day numbers respectively of the start of the era. Years prior to AD 1 are represented as negative numbers.

    end_date

    The ending date of the era, in the same format as the start_date, or one of the two special values, -* or +*. The value -* indicates that the ending date is the beginning of time. The value +* indicates that the ending date is the end of time.

    era_name

    The era, corresponding to the %EC conversion specification.

    era_format

    The format of the year in the era, corresponding to the %EY and %EY conversion specifications.

    ERA_D_FMT

    The era date format.

    ERA_T_FMT

    The locale's appropriate alternative time format, corresponding to the %EX field descriptor.

    ERA_D_T_FMT

    The locale's appropriate alternative date and time format, corresponding to the %Ec field descriptor.

    ALT_DIGITS

    The alternative symbols for digits, corresponding to the %O conversion specification modifier. The value consists of semicolon-separated symbols. The first is the alternative symbol corresponding to zero, the second is the symbol corresponding to one, and so on. Up to 100 alternative symbols may be specified. The following table displays the correspondence between the items described above and the conversion specifiers used by date(1) and the strftime(3C), wcsftime(3C), and strptime(3C) functions.

    localedeflanginfoConversion
    KeywordConstantSpecifier

    abday
    day
    abmon
    mon
    d_t_fmt
    date_fmt
    d_fmt
    t_fmt
    am_pm
    am_pm
    t_fmt_ampm
    era
    era_d_fmt
    era_t_fmt
    era_d_t_fmt
    alt_digits

     

    LC_TIME General Information

    Although certain of the field descriptors in the POSIX locale (such as the name of the month) are shown with initial capital letters, this need not be the case in other locales. Programs using these fields may need to adjust the capitalization if the output is going to be used at the beginning of a sentence.

    The LC_TIME descriptions of abday, day, mon, and abmon imply a Gregorian style calendar (7-day weeks, 12-month years, leap years, and so forth). Formatting time strings for other types of calendars is outside the scope of this document set.

    As specified under date in Locale Definition and strftime(3C), the field descriptors corresponding to the optional keywords consist of a modifier followed by a traditional field descriptor (for instance %Ex). If the optional keywords are not supported by the implementation or are unspecified for the current locale, these field descriptors are treated as the traditional field descriptor. For instance, assume the following keywords:

    alt_digits      "0th" ; "1st" ; "2nd" ; "3rd" ; "4th" ; "5th" ; \
    "6th" ; "7th" ; "8th" ; "9th" ; "10th">
    d_fmt   "The %Od day of %B in %Y"
    

    On 7/4/1776, the %x field descriptor would result in "The 4th day of July in 1776" while 7/14/1789 would come out as "The 14 day of July in 1789" The above example is for illustrative purposes only. The %O modifier is primarily intended to provide for Kanji or Hindi digits in date formats.  

    LC_MESSAGES

    The LC_MESSAGES category defines the format and values for affirmative and negative responses.

    The following keywords are recognized as part of the locale definition file. The nl_langinfo(3C) function accepts upper-case versions of the first four keywords.

    yesexpr

    The operand consists of an extended regular expression (see regex(5)) that describes the acceptable affirmative response to a question expecting an affirmative or negative response.

    noexpr

    The operand consists of an extended regular expression that describes the acceptable negative response to a question expecting an affirmative or negative response.

    yesstr

    The operand consists of a fixed string (not a regular expression) that can be used by an application for composition of a message that lists an acceptable affirmative response, such as in a prompt.

    nostr

    The operand consists of a fixed string that can be used by an application for composition of a message that lists an acceptable negative response. The format and values for affirmative and negative responses of the POSIX locale follow; the code listing depicting the localedef input, the table representing the same information with the addition of nl_langinfo() constants.

    LC_MESSAGES
    # This is the POSIX locale definition for
    # the LC_MESSAGES category.
    #
    yesexpr "<circumflex><left-square-bracket><y><Y>\
           <right-square-bracket>"
    #
    noexpr  "<circumflex><left-square-bracket><n><N>\
           <right-square-bracket>"
    #
    yesstr  "yes"
    nostr   "no"
    END LC_MESSAGES
    

    localedef Keywordlanginfo ConstantPOSIX Locale Value
    yesexprYESEXPR"^[yY]"
    noexpr
    yesstr
    nostr

    In an application conforming to the SUSv3 standard, the information on yesstr and nostr is not available.  

    SEE ALSO

    date(1), locale(1), localedef(1), sort(1), tr(1), uniq(1), localeconv(3C), nl_langinfo(3C), setlocale(3C), strcoll(3C), strftime(3C), strptime(3C), strxfrm(3C), wcscoll(3C), wcsftime(3C), wcsxfrm(3C), wctype(3C), attributes(5), charmap(5), extensions(5), regex(5)


     

    Index

    NAME
    DESCRIPTION
    Locale Definition
    LC_CTYPE
    LC_COLLATE
    collating-element keyword
    collating-symbol keyword
    order_start keyword
    Collation Order
    order_end keyword
    LC_MONETARY
    LC_NUMERIC
    LC_TIME
    LC_TIME C-language Access
    LC_TIME General Information
    LC_MESSAGES
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру