The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Вариант для распечатки Архивированная нить - только для чтения! 
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [Проследить за развитием треда]

"OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin emailИскать по авторуВ закладки on 20-Июн-03, 15:21  (MSK)
    Помогите, пожалуйста !!!
  Сижу под OpenBSD 3.2, в rc.conf прописываю: named_flags="", в комментарии написано так... перзапускаю машину, бзда пишет следующее:
starting named
named [  ] directory /var/named/ no such file or directory
savecore: no core dump
и т.д.
вхожу под рутом, пишу top ессно named нет,
но с консоли запускается, и работает нормально...
в rc.conf пробовал менять строку named_chroot=/var/named
система выдает какие то ошибки, но потом при входе в систему named
работает...
что делать ? подскажите, плз...
  Рекомендовать в FAQ | Cообщить модератору | Наверх

 Оглавление

Индекс форумов | Темы | Пред. тема | След. тема
Сообщения по теме

1. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Alexey Искать по авторуВ закладки on 20-Июн-03, 15:27  (MSK)
ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от FreeBDS rc.conf
  Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin emailИскать по авторуВ закладки on 20-Июн-03, 15:31  (MSK)
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.conf

              ДЕРЖИ...


#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $

# set these to "NO" to turn them off.  otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)

# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""

# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it exists

krb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs

# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named         # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfig

local_rcconf="/etc/rc.conf.local"

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line


  Рекомендовать в FAQ | Cообщить модератору | Наверх

3. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin emailИскать по авторуВ закладки on 20-Июн-03, 15:32  (MSK)
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.conf


#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $

# set these to "NO" to turn them off.  otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)

# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""

# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it exists

krb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs

# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named         # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfig

local_rcconf="/etc/rc.conf.local"

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line

  Рекомендовать в FAQ | Cообщить модератору | Наверх

10. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Alexey Искать по авторуВ закладки on 20-Июн-03, 15:48  (MSK)
она есть у тебя, этота дириктория?
  Рекомендовать в FAQ | Cообщить модератору | Наверх

4. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin emailИскать по авторуВ закладки on 20-Июн-03, 15:35  (MSK)
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.conf
А может тебе его на мыло швырнуть, а то он в форум не отсылается...
  Рекомендовать в FAQ | Cообщить модератору | Наверх

5. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin emailИскать по авторуВ закладки on 20-Июн-03, 15:37  (MSK)
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.conf


  ДЕРЖИ...


#!/bin/sh -
#
#       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $

# set these to "NO" to turn them off.  otherwise, they're used as flags
routed_flags=NO         # for normal use: "-q"
altqd_flags=NO          # for normal use: ""
mrouted_flags=NO        # for normal use: "", if activated
                        # be sure to enable multicast_router below.
rarpd_flags=NO          # for normal use: "-a"
bootparamd_flags=NO     # for normal use: ""
rbootd_flags=NO         # for normal use: ""
sshd_flags=""           # for normal use: ""
smtpfwdd_flags=NO       # for normal use: ""; be sure to configure smtpd(8)
                        # and sendmail(8) to use MSA only
named_flags=""          # for normal use: ""
rdate_flags=NO          # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO          # for normal use: ""
ntpdate_flags=NO        # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO        # for normal use: ""
mopd_flags=NO           # for normal use: "-a"
apmd_flags=NO           # for normal use: ""
dhcpd_flags=NO          # for normal use: "-q"
rtadvd_flags=NO         # for normal use: list of interfaces
                        # be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO        # for normal use: ""
                        # be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO         # for normal use: interface
                        # be sure to set net.inet6.ip6.forwarding=0
                        # be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO            # for normal use: "" (or "-l" for debugging)

# use -u to disable chroot, see httpd(8)
httpd_flags=NO          # for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO           # for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO         # for non-inetd use: "-b -u nobody -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO            # for normal use: ""

# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO       # for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO           # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO                   # Packet filter / NAT
portmap=NO              # Note: inetd(8) rpc services need portmap too
inetd=YES               # almost always needed
check_quotas=YES        # NO may be desirable in some YP environments
ntpd=YES                # run ntpd if it exists

krb5_master_kdc=NO      # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO       # KerberosV slave KDC.
afs=NO                  # mount and run afs

# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO       # Route all multicast packets to a single interface
multicast_router=NO     # A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags=                 # "-z" to compress
gated_flags=
ypserv_flags=                   # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags=                # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4"             # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt                # AMD's mount directory
amd_master=/etc/amd/master      # AMD 'master' map
syslogd_flags=                  # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named                # Named should not run as root unless necessary
named_chroot=/var/named         # Where to chroot named if not empty
pf_rules=/etc/pf.conf           # Packet filter rules file
pflogd_flags=                   # add more flags, ie. "-s 256"
afs_mount_point=/afs            # Mountpoint for AFS
afs_device=/dev/xfs0            # Device used by afsd
afsd_flags=-z                   # Flags passed to afsd
shlib_dirs=                     # extra directories for ldconfig

local_rcconf="/etc/rc.conf.local"

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line

  Рекомендовать в FAQ | Cообщить модератору | Наверх

7. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin emailИскать по авторуВ закладки on 20-Июн-03, 15:37  (MSK)
  ДЕРЖИ...


#!/bin/sh -
#
#       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $

# set these to "NO" to turn them off.  otherwise, they're used as flags
routed_flags=NO         # for normal use: "-q"
altqd_flags=NO          # for normal use: ""
mrouted_flags=NO        # for normal use: "", if activated
                        # be sure to enable multicast_router below.
rarpd_flags=NO          # for normal use: "-a"
bootparamd_flags=NO     # for normal use: ""
rbootd_flags=NO         # for normal use: ""
sshd_flags=""           # for normal use: ""
smtpfwdd_flags=NO       # for normal use: ""; be sure to configure smtpd(8)
                        # and sendmail(8) to use MSA only
named_flags=""          # for normal use: ""
rdate_flags=NO          # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO          # for normal use: ""
ntpdate_flags=NO        # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO        # for normal use: ""
mopd_flags=NO           # for normal use: "-a"
apmd_flags=NO           # for normal use: ""
dhcpd_flags=NO          # for normal use: "-q"
rtadvd_flags=NO         # for normal use: list of interfaces
                        # be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO        # for normal use: ""
                        # be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO         # for normal use: interface
                        # be sure to set net.inet6.ip6.forwarding=0
                        # be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO            # for normal use: "" (or "-l" for debugging)

# use -u to disable chroot, see httpd(8)
httpd_flags=NO          # for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO           # for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO         # for non-inetd use: "-b -u nobody -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO            # for normal use: ""

# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO       # for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO           # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO                   # Packet filter / NAT
portmap=NO              # Note: inetd(8) rpc services need portmap too
inetd=YES               # almost always needed
check_quotas=YES        # NO may be desirable in some YP environments
ntpd=YES                # run ntpd if it exists

krb5_master_kdc=NO      # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO       # KerberosV slave KDC.
afs=NO                  # mount and run afs

# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO       # Route all multicast packets to a single interface
multicast_router=NO     # A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags=                 # "-z" to compress
gated_flags=
ypserv_flags=                   # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags=                # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4"             # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt                # AMD's mount directory
amd_master=/etc/amd/master      # AMD 'master' map
syslogd_flags=                  # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named                # Named should not run as root unless necessary
named_chroot=/var/named         # Where to chroot named if not empty
pf_rules=/etc/pf.conf           # Packet filter rules file
pflogd_flags=                   # add more flags, ie. "-s 256"
afs_mount_point=/afs            # Mountpoint for AFS
afs_device=/dev/xfs0            # Device used by afsd
afsd_flags=-z                   # Flags passed to afsd
shlib_dirs=                     # extra directories for ldconfig

local_rcconf="/etc/rc.conf.local"

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line

  Рекомендовать в FAQ | Cообщить модератору | Наверх

8. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin emailИскать по авторуВ закладки on 20-Июн-03, 15:44  (MSK)
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.conf

  ДЕРЖИ...


#!/bin/sh -
#
#       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $

# set these to "NO" to turn them off.  otherwise, they're used as flags
routed_flags=NO         # for normal use: "-q"
altqd_flags=NO          # for normal use: ""
mrouted_flags=NO        # for normal use: "", if activated
                        # be sure to enable multicast_router below.
rarpd_flags=NO          # for normal use: "-a"
bootparamd_flags=NO     # for normal use: ""
rbootd_flags=NO         # for normal use: ""
sshd_flags=""           # for normal use: ""
smtpfwdd_flags=NO       # for normal use: ""; be sure to configure smtpd(8)
                        # and sendmail(8) to use MSA only
named_flags=""          # for normal use: ""
rdate_flags=NO          # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO          # for normal use: ""
ntpdate_flags=NO        # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO        # for normal use: ""
mopd_flags=NO           # for normal use: "-a"
apmd_flags=NO           # for normal use: ""
dhcpd_flags=NO          # for normal use: "-q"
rtadvd_flags=NO         # for normal use: list of interfaces
                        # be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO        # for normal use: ""
                        # be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO         # for normal use: interface
                        # be sure to set net.inet6.ip6.forwarding=0
                        # be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO            # for normal use: "" (or "-l" for debugging)

# use -u to disable chroot, see httpd(8)
httpd_flags=NO          # for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO           # for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO         # for non-inetd use: "-b -u nobody -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO            # for normal use: ""

# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO       # for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO           # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO                   # Packet filter / NAT
portmap=NO              # Note: inetd(8) rpc services need portmap too
inetd=YES               # almost always needed
check_quotas=YES        # NO may be desirable in some YP environments
ntpd=YES                # run ntpd if it exists

krb5_master_kdc=NO      # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO       # KerberosV slave KDC.
afs=NO                  # mount and run afs

# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO       # Route all multicast packets to a single interface
multicast_router=NO     # A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags=                 # "-z" to compress
gated_flags=
ypserv_flags=                   # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags=                # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4"             # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt                # AMD's mount directory
amd_master=/etc/amd/master      # AMD 'master' map
syslogd_flags=                  # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named                # Named should not run as root unless necessary
named_chroot=/var/named         # Where to chroot named if not empty
pf_rules=/etc/pf.conf           # Packet filter rules file
pflogd_flags=                   # add more flags, ie. "-s 256"
afs_mount_point=/afs            # Mountpoint for AFS
afs_device=/dev/xfs0            # Device used by afsd
afsd_flags=-z                   # Flags passed to afsd
shlib_dirs=                     # extra directories for ldconfig

local_rcconf="/etc/rc.conf.local"

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line

  Рекомендовать в FAQ | Cообщить модератору | Наверх

6. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от lavr emailИскать по авторуВ закладки on 20-Июн-03, 15:37  (MSK)
>    Помогите, пожалуйста !!!
>  Сижу под OpenBSD 3.2, в rc.conf прописываю: named_flags="", в комментарии
>написано так... перзапускаю машину, бзда пишет следующее:
>starting named
>named [  ] directory /var/named/ no such file or directory
>savecore: no core dump
>и т.д.
>вхожу под рутом, пишу top ессно named нет,
>но с консоли запускается, и работает нормально...
>в rc.conf пробовал менять строку named_chroot=/var/named
>система выдает какие то ошибки, но потом при входе в систему named
>
>работает...
>что делать ? подскажите, плз...

изучать /etc/rc

или посмотреть:

bash-2.05a$ grep named /etc/rc.conf
named_flags=""          # for normal use: ""
named_user=named                # Named should not run as root unless necessary
named_chroot=/var/named         # Where to chroot named if not empty
bash-2.05a$ ls -la /var/named
total 434
drwxr-xr-x   5 root   wheel     512 Jun 19 14:16 .
drwxr-xr-x  24 root   wheel     512 Aug 28  2001 ..
drwxr-xr-x   2 root   wheel     512 Jun 19 14:19 dev
drwxr-xr-x   2 root   wheel     512 Aug 16  2002 etc
-r-xr-xr-x   1 root   bin    204800 Nov 17  2002 named-xfer
-rw-r--r--   1 root   wheel    1374 Feb 12 14:49 named.boot
-rw-r--r--   1 root   wheel     963 Apr 15  2002 named.boot.orig
-rw-r--r--   1 root   wheel      35 Jun 19 14:19 named.pid
drwxr-xr-x   3 named  bin       512 Jun 19 14:16 namedb
bash-2.05a$ ps -axuww | grep named
named    27300  3.8  1.0  7892   312 ??  SNs   Thu02PM   18:14.01 named -t /var/named -u named
lavr     16750  0.0  0.7   196   212 p2  S+     3:36PM    0:00.09 grep named
root      7408  0.0  0.6   112   188 ??  Ss    Thu02PM    1:22.12 syslogd -a /var/named/dev/log
bash-2.05a$ uname -a
OpenBSD sunct0 3.1 VVM#1 sparc
bash-2.05a$

  Рекомендовать в FAQ | Cообщить модератору | Наверх

9. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin emailИскать по авторуВ закладки on 20-Июн-03, 15:45  (MSK)
  ДЕРЖИ...


#!/bin/sh -
#
#       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $

# set these to "NO" to turn them off.  otherwise, they're used as flags
routed_flags=NO         # for normal use: "-q"
altqd_flags=NO          # for normal use: ""
mrouted_flags=NO        # for normal use: "", if activated
                        # be sure to enable multicast_router below.
rarpd_flags=NO          # for normal use: "-a"
bootparamd_flags=NO     # for normal use: ""
rbootd_flags=NO         # for normal use: ""
sshd_flags=""           # for normal use: ""
smtpfwdd_flags=NO       # for normal use: ""; be sure to configure smtpd(8)
                        # and sendmail(8) to use MSA only
named_flags=""          # for normal use: ""
rdate_flags=NO          # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO          # for normal use: ""
ntpdate_flags=NO        # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO        # for normal use: ""
mopd_flags=NO           # for normal use: "-a"
apmd_flags=NO           # for normal use: ""
dhcpd_flags=NO          # for normal use: "-q"
rtadvd_flags=NO         # for normal use: list of interfaces
                        # be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO        # for normal use: ""
                        # be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO         # for normal use: interface
                        # be sure to set net.inet6.ip6.forwarding=0
                        # be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO            # for normal use: "" (or "-l" for debugging)

# use -u to disable chroot, see httpd(8)
httpd_flags=NO          # for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO           # for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO         # for non-inetd use: "-b -u nobody -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO            # for normal use: ""

# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO       # for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO           # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO                   # Packet filter / NAT
portmap=NO              # Note: inetd(8) rpc services need portmap too
inetd=YES               # almost always needed
check_quotas=YES        # NO may be desirable in some YP environments
ntpd=YES                # run ntpd if it exists

krb5_master_kdc=NO      # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO       # KerberosV slave KDC.
afs=NO                  # mount and run afs

# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO       # Route all multicast packets to a single interface
multicast_router=NO     # A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags=                 # "-z" to compress
gated_flags=
ypserv_flags=                   # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags=                # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4"             # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt                # AMD's mount directory
amd_master=/etc/amd/master      # AMD 'master' map
syslogd_flags=                  # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named                # Named should not run as root unless necessary
named_chroot=/var/named         # Where to chroot named if not empty
pf_rules=/etc/pf.conf           # Packet filter rules file
pflogd_flags=                   # add more flags, ie. "-s 256"
afs_mount_point=/afs            # Mountpoint for AFS
afs_device=/dev/xfs0            # Device used by afsd
afsd_flags=-z                   # Flags passed to afsd
shlib_dirs=                     # extra directories for ldconfig

local_rcconf="/etc/rc.conf.local"

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line

  Рекомендовать в FAQ | Cообщить модератору | Наверх

11. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Alexey Искать по авторуВ закладки on 20-Июн-03, 15:50  (MSK)
ну он сюда нашвырялся, твой rc.conf, у тебя ета директория есть? проверь
  Рекомендовать в FAQ | Cообщить модератору | Наверх

12. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от lavr emailИскать по авторуВ закладки on 20-Июн-03, 16:03  (MSK)
>  ДЕРЖИ...
>
>
>#!/bin/sh -
>#
>#       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22
>deraadt Exp $

<skipped>

тпру-у-у, тормози.

  Рекомендовать в FAQ | Cообщить модератору | Наверх


Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.




Спонсоры:
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2021 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру