The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"Радио интернет под FreeBSD 4.9"
Вариант для распечатки Архивированная нить - только для чтения! 
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [Проследить за развитием треда]

"Радио интернет под FreeBSD 4.9"
Сообщение от and emailИскать по авторуВ закладки(??) on 22-Ноя-04, 22:46  (MSK)
Добрый вечер! Хочу поставить сервер под FreeBSD 4.9, но у меня радиоинет и не знаю как настроить радио-карточку D-Link DWL-520+. Не можете подсказать как это зделать? Где можно об этом прочитать? Буду очень признателен.
  Рекомендовать в FAQ | Cообщить модератору | Наверх

 Оглавление

Индекс форумов | Темы | Пред. тема | След. тема
Сообщения по теме

1. "Радио интернет под FreeBSD 4.9"
Сообщение от ття Искать по авторуВ закладки on 23-Ноя-04, 07:16  (MSK)
к сожу, не поддерживается такая сетка фрёй - сам полгода назад пытался (фря 4.10)
  Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "Радио интернет под FreeBSD 4.9"
Сообщение от art Искать по авторуВ закладки(??) on 24-Ноя-04, 10:29  (MSK)
>Добрый вечер! Хочу поставить сервер под FreeBSD 4.9, но у меня радиоинет
>и не знаю как настроить радио-карточку D-Link DWL-520+. Не можете подсказать
>как это зделать? Где можно об этом прочитать? Буду очень признателен.
>


Помоему с начиная 5.2 появился ath, который их умеет, самому пришлось 5-ку ставить на старую тачку из-за энтой карты.

  Рекомендовать в FAQ | Cообщить модератору | Наверх

3. "Радио интернет под FreeBSD 4.9"
Сообщение от and emailИскать по авторуВ закладки(??) on 26-Ноя-04, 21:48  (MSK)
А что такое ath? Извини я новичок в этом деле но хотелось бы очень этим занятся. Я скачал дрова под FreeBSD для D-Link DWL-520+, но там действительно написано, что то о 5.2 версии. Я думал, что раз под 5.2 пойдет значит и под 4.9 должно. Но не тут то было. Я скачал 5.3 релис, под него эти дрова пойдут? Или нужно именно 5.2.1(только этот релиз есть на ФТП FreeBSD.org)? И еще один вопрос для чего второй диск в релисах(я имею в виду второй iso образ), когда ставиш FreeBSD, то исползуеш только первый. Для чего же второй?
  Рекомендовать в FAQ | Cообщить модератору | Наверх

4. "Радио интернет под FreeBSD 4.9"
Сообщение от Lamr emailИскать по авторуВ закладки on 26-Ноя-04, 22:06  (MSK)

>Но не тут то было. Я скачал 5.3 релис, под него
>эти дрова пойдут? Или нужно именно 5.2.1(только этот релиз есть на

Там они уже есть. Надо в ядро вставить поддержку устройства ath, почитай LINT, там должно быть. А не знаешь, как собрать ядро - читай FAQ.

>ФТП FreeBSD.org)? И еще один вопрос для чего второй диск в
>релисах(я имею в виду второй iso образ), когда ставиш FreeBSD, то

  Специально, чтобы лохи побольше трафика сливали. Это live CD, вроде как загрузочный с живой fs. Фиксить.

  Рекомендовать в FAQ | Cообщить модератору | Наверх

5. "Радио интернет под FreeBSD 4.9"
Сообщение от and Искать по авторуВ закладки(??) on 03-Дек-04, 00:18  (MSK)

Добрый вечер всем! Не хочет поддаватся мне эта карточка ни как. Я пересобрал ядро прописал в нем
device          ath
device          ath_hal
options         SC_DISABLE_REBOOT
options         IPFIREWALL
options         IPDIVERT
options         DUMMYNET
options         IPFIREWALL_VERBOSE
options         IPFIREWALL_VERBOSE_LIMIT=20
все прошло успешно(компиляция и установка, долго правда) но в сетевых интерфейсах ничего нового не появилось только rl0 - это моя сетевая на realtek чипсете, Freebsd-5.2.1 ее сразу увидала, а далее plip0 <unknow network interface type>. Что подскажите?
  Рекомендовать в FAQ | Cообщить модератору | Наверх

6. "Радио интернет под FreeBSD 4.9"
Сообщение от Lamr emailИскать по авторуВ закладки on 03-Дек-04, 00:43  (MSK)

Вывод команды ifconfig и из dmesg кусок, где она этот девайс определяет Вообще-то если эта карта определяется как ath, она должна после сборки ядра с её поддержкой ifconfig-ом конфигуриться.
  Рекомендовать в FAQ | Cообщить модератору | Наверх

7. "Радио интернет под FreeBSD 4.9"
Сообщение от Lamr emailИскать по авторуВ закладки on 03-Дек-04, 00:46  (MSK)

> сразу увидала, а далее plip0 <unknow network interface type>. Что подскажите?


Может у тебя в ядре не хватает какой-нить фигни типа ppp или slip?
Вывали и конфиг ядра тоже, пожалуйста.

  Рекомендовать в FAQ | Cообщить модератору | Наверх

8. "Радио интернет под FreeBSD 4.9"
Сообщение от Grey Искать по авторуВ закладки on 03-Дек-04, 07:48  (MSK)
>Добрый вечер! Хочу поставить сервер под FreeBSD 4.9, но у меня радиоинет
>и не знаю как настроить радио-карточку D-Link DWL-520+. Не можете подсказать
>как это зделать? Где можно об этом прочитать? Буду очень признателен.
>

а разве карты Z-Com не лучше? они давно поддерживаются и пашут у меня очень не плохо....

  Рекомендовать в FAQ | Cообщить модератору | Наверх

9. "Радио интернет под FreeBSD 4.9"
Сообщение от and Искать по авторуВ закладки(??) on 03-Дек-04, 19:03  (MSK)
Вот что мне выводят две команды dmesg и ifconfig

dmesg

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #1: Mon Dec  2 01:36:59 EET 2019
    root@taoo.org.ua:/usr/obj/usr/src/sys/WLAN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a70000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a701f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Cyrix 6x86MX (200.46-MHz 686-class CPU)
  Origin = "CyrixInstead"  Id = 0x600  Stepping = 0  DIR=0x0853
  Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX>
real memory  = 83820544 (79 MB)
avail memory = 71790592 (68 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD  AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fdc30
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x4d6,0x40b,0x480-0x48f,0x5000-0x501f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 11 INTA is routed to irq 10
pcib0: slot 12 INTA is routed to irq 5
agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at device 10.0 (no driver attached)
pci0: <network> at device 11.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe9012000-0xe90120ff irq 5 at device 12.0 on pci0
rl0: Ethernet address: 00:50:fc:e3:8a:ec
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <AcerLabs Aladdin UDMA33 controller> port 0xf000-0xf00f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 200455524 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 20 packets/entry by default
acd0: CDROM <GCR-8521B> at ata0-master PIO4
GEOM: create disk ad1 dp=0xc17bb260
ad1: 19092MB <ST320413A> [38792/16/63] at ata0-slave UDMA33
Mounting root from ufs:/dev/ad1s1a

ifconfig

rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 172.16.102.205 netmask 0xffffff00 broadcast 172.16.102.255
        inet6 fe80::250:fcff:fee3:8aec%rl0 prefixlen 64 scopeid 0x1
        ether 00:50:fc:e3:8a:ec
        media: Ethernet autoselect (none)
        status: no carrier
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3

А не льзя ли по подробнее о Z-Com? Он что поддерживает D-Link DWL-520+?

  Рекомендовать в FAQ | Cообщить модератору | Наверх

10. "Радио интернет под FreeBSD 4.9"
Сообщение от and Искать по авторуВ закладки(??) on 03-Дек-04, 19:31  (MSK)
>Да и вот моя конфигурация ядра это (FreeBSD 5,2,1)

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394.2.3 2004/01/26 19:42:11 nectar Exp $

machine i386
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident WLAN

#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.

#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols

options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as /, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output.  Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output.  Adds ~215k to driver.
options PFIL_HOOKS # pfil(9) framework

# Debugging for use in -current
#options DDB #Enable the kernel debugger
#options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed

# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC

device isa
device eisa
device pci

# Floppy drives
device fdc

# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering

# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters

device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters

device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50

# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID

# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse

device vga # VGA video card driver

device splash # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc

# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor

device agp # support several AGP chipsets

# Floating point support - do not disable.
device npx

# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer

# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus

# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports

# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x and SK-982x gigabit ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device ti # Alteon Networks Tigon I/II gigabit ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard nics included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device lnc # NE2100, NE32-VL Lance Ethernet cards
device sn # SMC's 9000 series of ethernet chips
device xe # Xircom pccard ethernet

# ISA devices that use the old ISA shims
#device le

# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter

# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device axe # ASIX Electronics USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet

# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)

# RADIO AND FIREWALL CHANGES
device ath
device ath_hal
options SC_DISABLE_REBOOT
options IPFIREWALL
options IPDIVERT
options DUMMYNET
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=20

  Рекомендовать в FAQ | Cообщить модератору | Наверх

11. "Радио интернет под FreeBSD 4.9"
Сообщение от Grey Искать по авторуВ закладки on 03-Дек-04, 19:46  (MSK)
>А не льзя ли по подробнее о Z-Com? Он что поддерживает D-Link
>DWL-520+?

http://info.radiolink.ru

а вообще Z-Com (wi) у меня пашут с Длинковскими 900AP+ нормально... 11 мегабит дают... с DWL-520+ не пробовал... но не думаю что будут проблемы... а ещё можно поискать длинковские карты которые на призмовском чипсете построены... они будут поддерживаться фрёй полюбому :) как раз wi и будет устройство... смотри список поддерживаемого оборудования на фре... для включения такого оборудования ядро править не надо

  Рекомендовать в FAQ | Cообщить модератору | Наверх


Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру