The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка  RSS
"Error code 1"
Вариант для распечатки  
Пред. тема | След. тема 
Форум Открытые системы на рабочей станции (Система)
Изначальное сообщение [ Отслеживать ]

"Error code 1"  +/
Сообщение от Rizoo (ok) on 15-Апр-10, 02:27 
Доброго времени суток!

Я так думаю он не может скомпилить один из модулей ядра, но при это сам модуль у меня в ядре закоментирован. Нельзя ли обойти сборку этого моудля?

Вот ошибка:

cc1: warnings being treated as errors
/usr/src/sys/modules/aic7xxx/ahc/ahc_pci/../../../../dev/aic7xxx/aic7xxx_pci.c: In function 'ahc_pci_resume':
/usr/src/sys/modules/aic7xxx/ahc/ahc_pci/../../../../dev/aic7xxx/aic7xxx_pci.c:1939: warning: 'sd.sd_MS' is used uninitialized in this function
/usr/src/sys/modules/aic7xxx/ahc/ahc_pci/../../../../dev/aic7xxx/aic7xxx_pci.c:2136: note: 'sd.sd_MS' was declared here
/usr/src/sys/modules/aic7xxx/ahc/ahc_pci/../../../../dev/aic7xxx/aic7xxx_pci.c:1941: warning: 'sd.sd_RDY' is used uninitialized in this function
/usr/src/sys/modules/aic7xxx/ahc/ahc_pci/../../../../dev/aic7xxx/aic7xxx_pci.c:2136: note: 'sd.sd_RDY' was declared here
/usr/src/sys/modules/aic7xxx/ahc/ahc_pci/../../../../dev/aic7xxx/aic7xxx_pci.c:1632: warning: 'sd.sd_CS' is used uninitialized in this function
/usr/src/sys/modules/aic7xxx/ahc/ahc_pci/../../../../dev/aic7xxx/aic7xxx_pci.c:2136: note: 'sd.sd_CS' was declared here
*** Error code 1

Stop in /usr/src/sys/modules/aic7xxx/ahc/ahc_pci.
*** Error code 1
и т.д.


вот конфиг ядра:

[rizo@rizo /usr/ports/audio/tuxguitar]$ sudo cat /usr/src/sys/amd64/conf/MYKERN
Password:
#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/ke...
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.531.2.8 2010/01/18 00:53:21 imp Exp $

machine     amd64
cpu        HAMMER
ident        MYKERN

# To statically compile in device wiring instead of /boot/device.hints
#hints        "GENERIC.hints"        # Default places to look for devices.

# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env        "GENERIC.env"

#makeoptions    DEBUG=-g        # Build kernel with gdb(1) debug symbols

options     SCHED_ULE        # ULE scheduler
options     PREEMPTION        # Enable kernel thread preemption
options     INET            # InterNETworking
#options     INET6            # IPv6 communications protocols
options     SCTP            # Stream Control Transmission Protocol
options     FFS            # Berkeley Fast Filesystem
options     SOFTUPDATES        # Enable FFS soft updates support
options     UFS_ACL            # Support for access control lists
options     UFS_DIRHASH        # Improve performance on big directories
options     UFS_GJOURNAL        # Enable gjournal-based UFS journaling
options     MD_ROOT            # MD is a potential root device
options     NFSCLIENT        # Network Filesystem Client
#options     NFSSERVER        # Network Filesystem Server
options     NFSLOCKD        # Network Lock Manager
#options     NFS_ROOT        # NFS usable as /, requires NFSCLIENT
options     MSDOSFS            # MSDOS Filesystem
options     CD9660            # ISO 9660 Filesystem
options     PROCFS            # Process filesystem (requires PSEUDOFS)
options     PSEUDOFS        # Pseudo-filesystem framework
options     GEOM_PART_GPT        # GUID Partition Tables.
options     GEOM_LABEL        # Provides labelization
options     COMPAT_43TTY        # BSD 4.3 TTY compat (sgtty)
#options     COMPAT_IA32        # Compatible with i386 binaries
options     COMPAT_FREEBSD4        # Compatible with FreeBSD4
options     COMPAT_FREEBSD5        # Compatible with FreeBSD5
options     COMPAT_FREEBSD6        # Compatible with FreeBSD6
options     COMPAT_FREEBSD7        # Compatible with FreeBSD7
options     SCSI_DELAY=5000        # Delay (in ms) before probing SCSI
options     KTRACE            # ktrace(1) support
options     STACK            # stack(9) support
options     SYSVSHM            # SYSV-style shared memory
options     SYSVMSG            # SYSV-style message queues
options     SYSVSEM            # SYSV-style semaphores
options     P1003_1B_SEMAPHORES    # POSIX-style semaphores
options     _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options     PRINTF_BUFR_SIZE=128    # Prevent printf output being interspersed.
options     KBD_INSTALL_CDEV    # install a CDEV entry in /dev
options     HWPMC_HOOKS        # Necessary kernel hooks for hwpmc(4)
options     AUDIT            # Security event auditing
options     MAC            # TrustedBSD MAC Framework
options        FLOWTABLE        # per-cpu routing cache
#options     KDTRACE_FRAME        # Ensure frames are compiled in
#options     KDTRACE_HOOKS        # Kernel DTrace hooks
options     INCLUDE_CONFIG_FILE     # Include this file in kernel

# Make an SMP-capable kernel by default
options     SMP            # Symmetric MultiProcessor Kernel

# CPU frequency control
device        cpufreq

# Bus support.
device        acpi
device        pci

# Floppy drives
#device        fdc

# ATA and ATAPI devices
device        ata
device        atadisk        # ATA disk drives
#device        ataraid        # ATA RAID drives
device        atapicd        # ATAPI CDROM drives
#device        atapifd        # ATAPI floppy drives
#device        atapist        # ATAPI tape drives
#options     ATA_STATIC_ID    # Static device numbering

# SCSI Controllers
#device        ahc        # AHA2940 and onboard AIC7xxx devices
#options     AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                    # output.  Adds ~128k to driver.
#device        ahd        # AHA39320/29320 and onboard AIC79xx devices
#options     AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                    # output.  Adds ~215k to driver.
device        amd        # AMD 53C974 (Tekram DC-390(T))
#device        hptiop        # Highpoint RocketRaid 3xxx series
#device        isp        # Qlogic family
#device        ispfw        # Firmware for QLogic HBAs- normally a module
device        mpt        # LSI-Logic MPT-Fusion
#device        ncr        # NCR/Symbios Logic
device        sym        # NCR/Symbios Logic (newer chipsets + those of `ncr')
device        trm        # Tekram DC395U/UW/F DC315U adapters

device        adv        # Advansys SCSI adapters
device        adw        # Advansys wide SCSI adapters
device        aic        # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device        bt        # Buslogic/Mylex MultiMaster SCSI adapters

# SCSI peripherals
device        scbus        # SCSI bus (required for SCSI)
device        ch        # SCSI media changers
device        da        # Direct Access (disks)
device        sa        # Sequential Access (tape etc)
device        cd        # CD
device        pass        # Passthrough device (direct SCSI access)
device        ses        # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device        amr        # AMI MegaRAID
#device        arcmsr        # Areca SATA II RAID
#XXX it is not 64-bit clean, -scottl
#device        asr        # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device        ciss        # Compaq Smart RAID 5*
#device        dpt        # DPT Smartcache III, IV - See NOTES for options
#device        hptmv        # Highpoint RocketRAID 182x
#device        hptrr        # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device        iir        # Intel Integrated RAID
#device        ips        # IBM (Adaptec) ServeRAID
#device        mly        # Mylex AcceleRAID/eXtremeRAID
#device        twa        # 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device        aac        # Adaptec FSA RAID
#device        aacp        # SCSI passthrough for aac (requires CAM)
#device        ida        # Compaq Smart RAID
#device        mfi        # LSI MegaRAID SAS
#device        mlx        # Mylex DAC960 family
#XXX pointer/int warnings
#device        pst        # Promise Supertrak SX6000
#device        twe        # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device        atkbdc        # AT keyboard controller
device        atkbd        # AT keyboard
#device        psm        # PS/2 mouse

device        kbdmux        # keyboard multiplexer

device        vga        # VGA video card driver

device        splash        # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device        sc

#device        agp        # support several AGP chipsets

device        apm
#device        pmtimer


# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device        cbb        # cardbus (yenta) bridge
device        pccard        # PC Card (16-bit) bus
device        cardbus        # CardBus (32-bit) bus

# Serial (COM) ports
device        uart        # Generic UART driver

# Parallel port
device        ppc
device        ppbus        # Parallel port bus (required)
#device        lpt        # Printer
device        plip        # TCP/IP over parallel
device        ppi        # Parallel port interface device
#device        vpo        # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device        puc

# PCI Ethernet NICs.
#device        de        # DEC/Intel DC21x4x (``Tulip'')
#device        em        # Intel PRO/1000 Gigabit Ethernet Family
#device        igb        # Intel PRO/1000 PCIE Server Gigabit Family
#device        ixgbe        # Intel PRO/10GbE PCIE Ethernet Family
#device        le        # AMD Am7900 LANCE and Am79C9xx PCnet
#device        ti        # Alteon Networks Tigon I/II gigabit Ethernet
#device        txp        # 3Com 3cR990 (``Typhoon'')
#device        vx        # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device        miibus        # MII bus support
#device        ae        # Attansic/Atheros L2 FastEthernet
#device        age        # Attansic/Atheros L1 Gigabit Ethernet
#device        alc        # Atheros AR8131/AR8132 Ethernet
#device        ale        # Atheros AR8121/AR8113/AR8114 Ethernet
#device        bce        # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device        bfe        # Broadcom BCM440x 10/100 Ethernet
device        bge        # Broadcom BCM570xx Gigabit Ethernet
#device        dc        # DEC/Intel 21143 and various workalikes
#device        et        # Agere ET1310 10/100/Gigabit Ethernet
#device        fxp        # Intel EtherExpress PRO/100B (82557, 82558)
#device        jme        # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device        lge        # Level 1 LXT1001 gigabit Ethernet
#device        msk        # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device        nfe        # nVidia nForce MCP on-board Ethernet
#device        nge        # NatSemi DP83820 gigabit Ethernet
#device        nve        # nVidia nForce MCP on-board Ethernet Networking
#device        pcn        # AMD Am79C97x PCI 10/100 (precedence over 'le')
#device        re        # RealTek 8139C+/8169/8169S/8110S
#device        rl        # RealTek 8129/8139
#device        sf        # Adaptec AIC-6915 (``Starfire'')
#device        sis        # Silicon Integrated Systems SiS 900/SiS 7016
#device        sk        # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device        ste        # Sundance ST201 (D-Link DFE-550TX)
#device        stge        # Sundance/Tamarack TC9021 gigabit Ethernet
#device        tl        # Texas Instruments ThunderLAN
#device        tx        # SMC EtherPower II (83c170 ``EPIC'')
#device        vge        # VIA VT612x gigabit Ethernet
#device        vr        # VIA Rhine, Rhine II
#device        wb        # Winbond W89C840F
#device        xl        # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
#device        cs        # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device        ed        # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device        ex        # Intel EtherExpress Pro/10 and Pro/10+
#device        ep        # Etherlink III based cards
#device        fe        # Fujitsu MB8696x based cards
#device        sn        # SMC's 9000 series of Ethernet chips
#device        xe        # Xircom pccard Ethernet

# Wireless NIC cards
device        wlan        # 802.11 support
#options     IEEE80211_DEBUG    # enable debug msgs
#options     IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
#options     IEEE80211_SUPPORT_MESH    # enable 802.11s draft support

# Special for my wireless card
device        bwi

device        wlan_wep    # 802.11 WEP support
device        wlan_ccmp    # 802.11 CCMP support
device        wlan_tkip    # 802.11 TKIP support
device        wlan_amrr    # AMRR transmit rate control algorithm
#device        an        # Aironet 4500/4800 802.11 wireless NICs.
#device        ath        # Atheros pci/cardbus NIC's
#device        ath_hal        # pci/cardbus chip support
#options     AH_SUPPORT_AR5416    # enable AR5416 tx/rx descriptors
#device        ath_rate_sample    # SampleRate tx rate control for ath
#device        ral        # Ralink Technology RT2500 wireless NICs.
#device        wi        # WaveLAN/Intersil/Symbol 802.11 wireless NICs.

# Pseudo devices.
device        loop        # Network loopback
device        random        # Entropy device
device        ether        # Ethernet support
device        vlan        # 802.1Q VLAN support
device        tun        # Packet tunnel.
device        pty        # BSD-style compatibility pseudo ttys
device        md        # Memory "disks"
device        gif        # IPv6 and IPv4 tunneling
#device        faith        # IPv6-to-IPv4 relaying (translation)
device        firmware    # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device        bpf        # Berkeley packet filter

# USB support
device        uhci        # UHCI PCI->USB interface
device        ohci        # OHCI PCI->USB interface
device        ehci        # EHCI PCI->USB interface (USB 2.0)
device        usb        # USB Bus (required)
#device        udbp        # USB Double Bulk Pipe devices
device        uhid        # "Human Interface Devices"
device        ukbd        # Keyboard
#device        ulpt        # Printer
device        umass        # Disks/Mass storage - Requires scbus and da
device        ums        # Mouse
#device        urio        # Diamond Rio 500 MP3 player
# USB Serial devices
#device        uark        # Technologies ARK3116 based serial adapters
#device        ubsa        # Belkin F5U103 and compatible serial adapters
#device        uftdi        # For FTDI usb serial adapters
#device        uipaq        # Some WinCE based devices
#device        uplcom        # Prolific PL-2303 serial adapters
#device        uslcom        # SI Labs CP2101/CP2102 serial adapters
#device        uvisor        # Visor and Palm devices
#device        uvscom        # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device        aue        # ADMtek USB Ethernet
#device        axe        # ASIX Electronics USB Ethernet
#device        cdce        # Generic USB over Ethernet
#device        cue        # CATC USB Ethernet
#device        kue        # Kawasaki LSI USB Ethernet
#device        rue        # RealTek RTL8150 USB Ethernet
#device        udav        # Davicom DM9601E USB
# USB Wireless
#device        rum        # Ralink Technology RT2501USB wireless NICs
#device        uath        # Atheros AR5523 wireless NICs
#device        ural        # Ralink Technology RT2500USB wireless NICs
#device        zyd        # ZyDAS zb1211/zb1211b wireless NICs

# FireWire support
#device        firewire    # FireWire bus code
#device        sbp        # SCSI over FireWire (Requires scbus and da)
#device        fwe        # Ethernet over FireWire (non-standard!)
#device        fwip        # IP over FireWire (RFC 2734,3146)
#device        dcons        # Dumb console driver
#device        dcons_crom    # Configuration ROM for dcons

# Sound
device        sound
device        snd_hda
device        ntfs


Первая моя компиляция прошла удачно (примерно месяц-полтора назад была), сейчас же она не хочет, хотя конфиг ядра я почти не менял (убрал ps\2 и добавил bwi)
[rizo@rizo ~]$ uname -a
FreeBSD rizo.campus 8.0-STABLE FreeBSD 8.0-STABLE #0: Thu Mar 18 02:10:57 MSK 2010     Rizo@rizo.campus:/usr/obj/usr/src/sys/MYKERN  amd64

Заранее благодарен!

Ответить | Правка | Cообщить модератору

Оглавление

Сообщения по теме [Сортировка по времени | RSS]


1. "Error code 1"  +/
Сообщение от DeadLoco (ok) on 15-Апр-10, 12:19 
>Первая моя компиляция прошла удачно (примерно месяц-полтора назад была), сейчас же она
>не хочет, хотя конфиг ядра я почти не менял (убрал ps\2 и добавил bwi)

Попробуйте олд-скул компиляцию:

cd ../compile/MYKERN && make cleandepend && make depend && make

Ответить | Правка | ^ к родителю #0 | Наверх | Cообщить модератору

2. "Error code 1"  +/
Сообщение от Rizoo (ok) on 15-Апр-10, 21:47 
>>Первая моя компиляция прошла удачно (примерно месяц-полтора назад была), сейчас же она
>>не хочет, хотя конфиг ядра я почти не менял (убрал ps\2 и добавил bwi)
>
>Попробуйте олд-скул компиляцию:
>
>cd ../compile/MYKERN && make cleandepend && make depend && make

[rizo@rizo /usr/src/sys/conf]$ find /usr/src -iname MYKERN
/usr/src/sys/amd64/conf/MYKERN

кроме моего конфига больше ничего нет

Ответить | Правка | ^ к родителю #1 | Наверх | Cообщить модератору

3. "Error code 1"  +/
Сообщение от DeadLoco (ok) on 15-Апр-10, 22:10 
>/usr/src/sys/amd64/conf/MYKERN
>
>кроме моего конфига больше ничего нет

# rm -r /usr/src/sys/amd64/compile/*
# cd  /usr/src/sys/amd64/conf
# config MYKERN
# cd ../compile/MYKERN
# make cleandepend
# make depend
# make

Если последний этап проходит без ошибок:

# make install && shutdown -r now

Ответить | Правка | ^ к родителю #2 | Наверх | Cообщить модератору

4. "Error code 1"  +/
Сообщение от Rizoo (ok) on 15-Апр-10, 23:44 
># make
>
>Если последний этап проходит без ошибок:
>
># make install && shutdown -r now

cc1: warnings being treated as errors
/usr/src/sys/modules/aic7xxx/ahc/ahc_pci/../../../../dev/aic7xxx/aic7xxx_pci.c: In function 'ahc_pci_resume':
и т.д.

та же самая ошибка (

Ответить | Правка | ^ к родителю #3 | Наверх | Cообщить модератору

5. "Error code 1"  +/
Сообщение от DeadLoco (ok) on 16-Апр-10, 00:38 
>та же самая ошибка (

Покажите-ка вывод
# uname -a

Ответить | Правка | ^ к родителю #4 | Наверх | Cообщить модератору

6. "Error code 1"  +/
Сообщение от DeadLoco (ok) on 16-Апр-10, 00:51 
>та же самая ошибка (

Сделайте вот такой конфиг ядра и прогоните его по процедуре, приведенной выше:

----------8<---------------------------------
machine     amd64
cpu         HAMMER
ident       DEADKERN

options     SCHED_ULE
options     PREEMPTION
options     INET
options     SCTP
options     FFS
options     SOFTUPDATES
options     UFS_ACL
options     UFS_DIRHASH
options     UFS_GJOURNAL
options     MD_ROOT
options     NFSCLIENT
options     NFSLOCKD
options     MSDOSFS
options     CD9660
options     PROCFS
options     PSEUDOFS
options     GEOM_PART_GPT
options     GEOM_LABEL
options     COMPAT_43TTY
options     COMPAT_FREEBSD4
options     COMPAT_FREEBSD5
options     COMPAT_FREEBSD6
options     COMPAT_FREEBSD7
options     SCSI_DELAY=5000
options     KTRACE
options     STACK
options     SYSVSHM
options     SYSVMSG
options     SYSVSEM
options     P1003_1B_SEMAPHORES
options     _KPOSIX_PRIORITY_SCHEDULING
options     PRINTF_BUFR_SIZE=128
options     KBD_INSTALL_CDEV
options     HWPMC_HOOKS
options     AUDIT
options     MAC
options     FLOWTABLE
options     INCLUDE_CONFIG_FILE

options     SMP
device      cpufreq
device      acpi
device      pci
device      ata
device      atadisk
device      atapicd
                    
                    
device      scbus        
device      da
device      cd
device      pass
            
device      atkbdc        
device      atkbd
device      kbdmux        
device      vga        
device      splash        
device      sc

device      uart        

device      miibus        
device      bge

device      wlan
device      bwi
device      wlan_wep    
device      wlan_ccmp
device      wlan_tkip
device      wlan_amrr
device      loop        
device      random
device      ether
device      vlan
device      tun
device      pty
device      md
device      gif
device      firmware
device      bpf        
device      uhci        
device      ohci
device      ehci
device      usb
device      uhid
device      ukbd
device      umass
device      ums

device      sound
device      snd_hda
device      ntfs

Ответить | Правка | ^ к родителю #4 | Наверх | Cообщить модератору

7. "Error code 1"  +/
Сообщение от Rizoo (ok) on 16-Апр-10, 02:20 
спасибо.
проблема решилась уменьшением уровня оптимизации с О3 до О2
Ответить | Правка | ^ к родителю #6 | Наверх | Cообщить модератору

8. "Error code 1"  +/
Сообщение от DeadLoco (ok) on 16-Апр-10, 09:44 
>спасибо.
>проблема решилась уменьшением уровня оптимизации с О3 до О2

ОМГ... Неужели было трудно указать, что вы попутно играетесь с оптимизацией компилятора?!

Ответить | Правка | ^ к родителю #7 | Наверх | Cообщить модератору

9. "Error code 1"  +/
Сообщение от AsterNet email on 22-Апр-10, 00:00 
>>спасибо.
>>проблема решилась уменьшением уровня оптимизации с О3 до О2
>
>ОМГ... Неужели было трудно указать, что вы попутно играетесь с оптимизацией компилятора?!
>

Spasibo ... tema pomogla , tozhe kak to tupo ne sobiralos' yadro , v itoge , optimizaciya kompilyacii .. ubral optimizaciyu .. vse kak po chasam

Ответить | Правка | ^ к родителю #8 | Наверх | Cообщить модератору

10. "Error code 1"  +/
Сообщение от Pazitiff on 22-Июн-11, 15:53 
Спасибо, была такая же засада.
Ответить | Правка | ^ к родителю #9 | Наверх | Cообщить модератору

Архив | Удалить

Рекомендовать для помещения в FAQ | Индекс форумов | Темы | Пред. тема | След. тема




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру