The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

mbp_card_free (9)
  • >> mbp_card_free (9) ( FreeBSD man: Ядро )

  • BSD mandoc
     

    NAME

    
    
    mbpool
    
     - buffer pools for network interfaces
    
     
    

    SYNOPSIS

       #include <sys/types.h>
       #include <machine/bus.h>
       #include <sys/mbpool.h>
    Vt struct mbpool ; int Fo mbp_create Fa struct mbpool **mbp const char *name bus_dma_tag_t dmat Fa u_int max_pages size_t page_size size_t chunk_size Fc Ft void mbp_destroy (struct mbpool *mbp);
    void * mbp_alloc (struct mbpool *mbp bus_addr_t *pa uint32_t *hp);
    void mbp_free (struct mbpool *mbp void *p);
    void mbp_ext_free (void * void *);
    void mbp_card_free (struct mbpool *mbp);
    void mbp_count (struct mbpool *mbp u_int *used u_int *card u_int *free);
    void * mbp_get (struct mbpool *mbp uint32_t h);
    void * mbp_get_keep (struct mbpool *mbp uint32_t h);
    void Fo mbp_sync Fa struct mbpool *mbp uint32_t h bus_addr_t off bus_size_t len Fa u_int op Fc

    MODULE_DEPEND (your_module libmbpool 1 1 1);

    options LIBMBPOOL  

    DESCRIPTION

    Mbuf pools are intended to help drivers for interface cards that need huge amounts of receive buffers, and additionally provides a mapping between these buffers and 32-bit handles.

    An example of these cards are the Fore/Marconi ForeRunnerHE cards. These employ up to 8 receive groups, each with two buffer pools, each of which can contain up to 8192. This gives a total maximum number of more than 100000 buffers. Even with a more moderate configuration the card eats several thousand buffers. Each of these buffers must be mapped for DMA. While for machines without an IOMMU and with lesser than 4GByte memory this is not a problem, for other machines this may quickly eat up all available IOMMU address space and/or bounce buffers. On sparc64, the default I/O page size is 16k, so mapping a simple mbuf wastes 31/32 of the address space.

    Another problem with most of these cards is that they support putting a 32-bit handle into the buffer descriptor together with the physical address. This handle is reflected back to the driver when the buffer is filled, and assists the driver in finding the buffer in host memory. For 32-bit machines, the virtual address of the buffer is usually used as the handle. This does not work for 64-bit machines for obvious reasons, so a mapping is needed between these handles and the buffers. This mapping should be possible without searching lists and the like.

    An mbuf pool overcomes both problems by allocating DMA-able memory page wise with a per-pool configurable page size. Each page is divided into a number of equally-sized chunks, the last MBPOOL_TRAILER_SIZE of which are used by the pool code (4 bytes). The rest of each chunk is usable as a buffer. There is a per-pool limit on pages that will be allocated.

    Additionally, the code manages two flags for each buffer: ``on-card'' and ``used'' A buffer may be in one of three states:

    free
    None of the flags is set.
    on-card
    Both flags are set. The buffer is assumed to be handed over to the card and waiting to be filled.
    used
    The buffer was returned by the card and is now travelling through the system.

    A pool is created with mbp_create (.);
    This call specifies a DMA tag Fa dmat to be used to create and map the memory pages via bus_dmamem_alloc9. The Fa chunk_size includes the pool overhead. It means that to get buffers for 5 ATM cells (240 bytes), a chunk size of 256 should be specified. This results in 12 unused bytes between the buffer, and the pool overhead of four byte. The total maximum number of buffers in a pool is Fa max_pages * Fa ( page_size / Fa chunk_size ) . The maximum value for Fa max_pages is 2^14-1 (16383) and the maximum of Fa page_size / Fa chunk_size is 2^9 (512). If the call is successful, a pointer to a newly allocated Vt struct mbpool is set into the variable pointed to by Fa mpb .

    A pool is destroyed with mbp_destroy (.);
    This frees all pages and the pool structure itself. If compiled with DIAGNOSTICS the code checks that all buffers are free. If not, a warning message is issued to the console.

    A buffer is allocated with mbp_alloc (.);
    This returns the virtual address of the buffer and stores the physical address into the variable pointed to by Fa pa . The handle is stored into the variable pointed to by Fa hp . The two most significant bits and the 7 least significant bits of the handle are unused by the pool code and may be used by the caller. These are automatically stripped when passing a handle to one of the other functions. If a buffer cannot be allocated (either because the maximum number of pages is reached, no memory is available or the memory cannot be mapped), NULL is returned. If a buffer could be allocated, it is in the ``on-card'' state.

    When the buffer is returned by the card, the driver calls mbp_get ();
    with the handle. This function returns the virtual address of the buffer and clears the ``on-card'' bit. The buffer is now in the ``used'' state. The function mbp_get_keep ();
    differs from mbp_get ();
    in that it does not clear the ``on-card'' bit. This can be used for buffers that are returned ``partially'' by the card.

    A buffer is freed by calling mbp_free ();
    with the virtual address of the buffer. This clears the ``used'' bit, and puts the buffer on the free list of the pool. Note that free buffers are NOT returned to the system. The function mbp_ext_free ();
    can be given to m_extadd ();
    as the free function. The user argument must be the pointer to the pool.

    Before using the contents of a buffer returned by the card, the driver must call mbp_sync ();
    with the appropriate parameters. This results in a call to bus_dmamap_sync9 for the buffer.

    All buffers in the pool that are currently in the ``on-card'' state can be freed with a call to mbp_card_free (.);
    This may be called by the driver when it stops the interface. Buffers in the ``used'' state are not freed by this call.

    For debugging it is possible to call mbp_count (.);
    This returns the number of buffers in the ``used'' and ``on-card'' states and the number of buffers on the free list.  

    SEE ALSO

    mbuf(9)  

    CAVEATS

    The function mbp_sync ();
    is currently a no-op because bus_dmamap_sync9 is missing the offset and length parameters.  

    AUTHORS

    An Harti Brandt Aq harti@FreeBSD.org


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    SEE ALSO
    CAVEATS
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру