Исходное сообщение
"PPPoE FreeBSD нет подключения" Отправлено valpo, 14-Авг-09 10:40
Добрый день Собственно сабж. 2-й день вожусь - не могу через мост установить соединение. ppp.conf default: set log Phase Chat LCP IPCP CCP Warning Error Alert tun command adsl: set device PPPoE:xl0 set authname XXX set authkey YYY set dial set login add default HISADDR ppp.log ppp[6950]: Phase: Using interface: tun0 ppp[6950]: Phase: deflink: Created in closed state ppp[6950]: tun0: Command: adsl: set device PPPoE:xl0 ppp[6950]: tun0: Command: adsl: set authname XXXXXX ppp[6950]: tun0: Command: adsl: set authkey ******** ppp[6950]: tun0: Command: adsl: set dial ppp[6950]: tun0: Command: adsl: set login ppp[6950]: tun0: Command: adsl: add default HISADDR ppp[6951]: tun0: Phase: PPP Started (ddial mode). ppp[6951]: tun0: Phase: bundle: Establish ppp[6951]: tun0: Phase: deflink: closed -> opening ppp[6951]: tun0: Phase: deflink: Connected! ppp[6951]: tun0: Phase: deflink: opening -> dial ppp[6951]: tun0: Phase: deflink: dial -> carrier ppp[6951]: tun0: Phase: deflink: Disconnected! ppp[6951]: tun0: Phase: deflink: carrier -> hangup ppp[6951]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out ppp[6951]: tun0: Phase: deflink: 0 packets in, 0 packets out ppp[6951]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Aug 14 09:25:47 2009 ppp[6951]: tun0: Phase: deflink: hangup -> opening ppp[6951]: tun0: Phase: deflink: Enter pause (30) for redialing. ppp[6951]: tun0: Chat: deflink: Redial timer expired. ppp[6951]: tun0: Phase: deflink: Connected! ppp[6951]: tun0: Phase: deflink: opening -> dial ppp[6951]: tun0: Phase: deflink: dial -> carrier ppp[6951]: tun0: Phase: deflink: Disconnected! ppp[6951]: tun0: Phase: deflink: carrier -> hangup ppp[6951]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out ppp[6951]: tun0: Phase: deflink: 0 packets in, 0 packets out ppp[6951]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Aug 14 09:26:22 2009 ppp[6951]: tun0: Phase: deflink: hangup -> opening ppp[6951]: tun0: Phase: deflink: Enter pause (30) for redialing. И так до бесконечности... Пробовал вручную устанавливать соединение. Не происходит успешная проверка линии LCP, т.е. 1-я заглавная буква в ppp не появляется. Помогите, кто чем может..