Первая подвижка: получил ещё один внутренный номер на PBX.Задача меняется. Для отладки делаю следующее:
Звоню через PBX на новый номер. Дозваниваюсь, но в трубке - мёртвая тишина. 5350 соображает, что это вроде как data dialpeer, но её модем молчит.
Кусок конфига, отвечающий за линии:
!
line con 0
exec-timeout 0 0
logging synchronous
login authentication LocalAuth
line aux 0
logging synchronous
line vty 0 4
session-timeout 20
exec-timeout 20 0
login authentication LocalAuth
line 1/00
exec-timeout 0 0
no flush-at-activation
modem InOut
modem autoconfigure discovery
rotary 1
transport input all
transport output lat pad telnet rlogin udptn v120 lapb-ta
escape-character NONE
autoselect arap
autoselect ppp
line 1/01 1/59
exec-timeout 0 0
no flush-at-activation
modem InOut
modem autoconfigure discovery
rotary 1
transport input all
transport output lat pad telnet rlogin udptn v120 lapb-ta
escape-character NONE
autoselect ppp
!
Просмотр статуса линии 1/59:
-----------------
sh line 1/59
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
I 1/59 Digital modem - inout 1 - - 0 0 0/0 -
Line 1/59, Location: "", Type: ""
Length: 24 lines, Width: 80 columns
Status: No Exit Banner, CTS Raised
Capabilities: No Flush-at-Activation, Hardware Flowcontrol In
Hardware Flowcontrol Out, Modem Callout, Modem RI is CD,
Line usable as async interface, Modem Discovery, Integrated Modem
Modem state: Idle
modem(slot/port)=1/59, state=IDLE
dsx1(slot/unit/channel)=NONE, status=VDEV_STATUS_ACTIVE_CALL.VDEV_STATUS_ALLOCATED.
Modem hardware state: DTR noDCD CTS RTS
Group codes: 0, Modem Configured
Special Chars: Escape Hold Stop Start Disconnect Activation
none none - - none
Timeouts: Idle EXEC Idle Session Modem Answer Session Dispatch
never never none not set
Idle Session Disconnect Warning
never
Login-sequence User Response
00:00:30
Autoselect Initial Wait
not set
Modem type is nextport.
Session limit is not set.
Time since activation: never
Editing is enabled.
History is enabled, history size is 20.
DNS resolution in show commands is enabled
Full user help is disabled
Allowed input transports are lat pad mop telnet rlogin udptn v120 lapb-ta.
Allowed output transports are lat pad telnet rlogin udptn v120 lapb-ta.
Preferred transport is lat.
No output characters are padded
No special data dispatching characters