Исходное сообщение
"Cisco 2960 + PRO/1000 + VLANS" Отправлено Serg, 28-Июн-07 11:08
>Никак не могу настроить чтобы сетевуха на серваке vlan`ы увидела, вот настройки >киски: > >nk_cisco_1#sh run int gi 0/1 >Building configuration... > >Current configuration : 141 bytes >! >interface GigabitEthernet0/1 > description Server_1 > switchport trunk allowed vlan 1,10 > switchport mode trunk > switchport nonegotiate >end > > >nk_cisco_1#sh int gi 0/1 trunk > >Port        Mode     >     Encapsulation  Status     >    Native vlan >Gi0/1       on     >      802.1q     >    trunking      1 > > >Port        Vlans allowed on trunk > >Gi0/1       1,10 > >Port        Vlans allowed and active >in management domain >Gi0/1       1,10 > >Port        Vlans in spanning tree >forwarding state and not pruned >Gi0/1       1,10 > >nk_cisco_1#sh int gi 0/1 switchport >Name: Gi0/1 >Switchport: Enabled >Administrative Mode: trunk >Operational Mode: trunk >Administrative Trunking Encapsulation: dot1q >Operational Trunking Encapsulation: dot1q >Negotiation of Trunking: Off >Access Mode VLAN: 1 (default) >Trunking Native Mode VLAN: 1 (default) >Administrative Native VLAN tagging: enabled >Voice VLAN: none >Administrative private-vlan host-association: none >Administrative private-vlan mapping: none >Administrative private-vlan trunk native VLAN: none >Administrative private-vlan trunk Native VLAN tagging: enabled >Administrative private-vlan trunk encapsulation: dot1q >Administrative private-vlan trunk normal VLANs: none >Administrative private-vlan trunk private VLANs: none >Operational private-vlan: none >Trunking VLANs Enabled: 1,10 >Pruning VLANs Enabled: 2-1001 >Capture Mode Disabled >Capture VLANs Allowed: ALL > >Protected: false >Unknown unicast blocked: disabled >Unknown multicast blocked: disabled >Appliance trust: none > > >где мог ошибиться? =( Разрешил 1 и 10 на интерфейсе правильно, а на сетевухе поднял VLAN 1 и 10 ?