The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации

Next Previous Contents

3. Client-server connection with kermit.

This is the most transient of all the configurations described here. It requires the least amount of system configuration, although in operation, it is the more difficult to use of the systems described here.

In brief, you start kermit on both the Linux machine and the Mac, and place one of them in server mode. It doesn't matter which machine is the client ant which is the server, because this is a peer-to-peer connection. However, the Linux kermit can take advantage of Linux's superior scripting abilities, so it seems logical (to me at least) to designate the Linux-side kermit as the server, because this is the more readily automated task.

You should ensure that kermit is installed correctly on both the Mac and the Linux PC. Follow the instructions in the respective kermit distributions. On the Linux machine type kermit at the shell prompt to start it. You may need root permissions in order to set the port and baud rate.

kermit, the recent POSIX versions for Unices, supports baud rates up to 115 Kbps. The more recent Macintosh versions support serial port speeds up to 57.6 Kbps. This should be more than sufficient for any dumb tty-type application, but if you need a higher-speed connection, you're s.o.l, as far as kermit and serial lines are concerned. However, kermit provides facilities for communication over a TCP/IP link, but I haven't been able to test it. See the alternative in the following sections. Just remember, especially on the Mac side, to use a different port for kermit serial connections than your TCP/IP connections, because Mac kermit will rudely hose a serial port that is already in use.

With that in mind, your .kermrc file would contain something like this:

echo Executing site initialization file /usr/local/bin/ckermit.local.ini....
set prompt Chanel3 >
set line /dev/ttyS0
set baud 38400
set send packet-length 2000
set receive packet-length 2000
set block 3
set file type binary
Then, in your ~/.kermrc file, you would have a line like
take /usr/local/bin/ckermit.local.ini
On the Macintosh side, set the same communication parameters for bps, stop bits, parity, and word length. Some older versions of Mac Kermit do not support 2k packets, so you might need to set a smaller packet size. Howerver, kermit sets the communication packet length based on the receive packet-length setting, so you need to set a shorter packet size on the Linux end, too.

To actually communicate over the link, you need to enter server mode on either the Mac or Linux side. It doesn't matter which. See the kermit docs for details of server mode.

3.1 Macintosh resources.

This is one of the very few kermit applications where setting a text file type for transfers is useful. This is because Macintosh files have two parts: the data fork and the resource fork. The data fork corresponds to what we in the Linux world think of as a file: it's the actual data. The resource fork contains bitmaps for the icons, keymaps, font specifications, and the like. If you transfer a file from Linux to the Mac, the file won't be recognized as a text file by the Mac, if you use binary mode.

When transferring binary files between the two systems, you should use the Macintosh .hqx BinHex format, which is a 7-bit encoding of an 8-bit data file. Mac utilities like BinHexer or StuffIt will covert the file to its binary form.

If you have a text file which inadvertently ends up as a data-only file on the Mac, it's likely that it won't even appear in an Open dialog list box. What you need to do is open the file with ResEdit, which is available from mac.archive.umich.edu. ResEdit will tell you that the file you're opening has no resource fork and then asks if you would like to add one. You should answer "Yes" to this question. You can then edit the file's Type and Creator by selecting the Open Special option of the File menu. All Macintosh text files are type TEXT, so replace the question marks in the Text box with that. The Creator code depends on your text editor or word processor. Each one is unique, incidentally, and is how the Mac identifies different apps. The Creator code for GNU Emacs on the Mac is EMAC, for example. If in doubt what the creator code of your text editor or word processor is, use ttxt, which is the creator code for TeachText (which is the Mac equivalent of EDLIN.EXE.) Then your real word processor or text editor can translate the file from TeachText to its native type.

There are many other neato things which TeachText can do, so it's worthwhile to keep it permanently on your Mac. The book Voodoo Mac, by Kay Yarborough Nelson, is a good source of tried-and-true Macintosh tricks that use ResEdit, TeachText, the Finder, and other overlooked programs.


Next Previous Contents


Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру