The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

time (1)
  • time (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • time (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • time (1) ( Русские man: Команды и прикладные программы пользовательского уровня )
  • >> time (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  • time (1) ( POSIX man: Команды и прикладные программы пользовательского уровня )
  • time (2) ( Solaris man: Системные вызовы )
  • time (2) ( Русские man: Системные вызовы )
  • time (2) ( Linux man: Системные вызовы )
  • time (3) ( FreeBSD man: Библиотечные вызовы )
  • time (3) ( POSIX man: Библиотечные вызовы )
  • time (7) ( Linux man: Макропакеты и соглашения )
  • time (9) ( FreeBSD man: Ядро )
  • Ключ time обнаружен в базе ключевых слов.
  •  

    NAME

    time - time a simple command or give resource usage
     
    

    SYNOPSIS

    time [options] command [arguments...]  

    DESCRIPTION

    The time command runs the specified program command with the given arguments. When command finishes, time writes a message to standard error giving timing statistics about this program run. These statistics consist of (i) the elapsed real time between invocation and termination, (ii) the user CPU time (the sum of the tms_utime and tms_cutime values in a struct tms as returned by times(2)), and (iii) the system CPU time (the sum of the tms_stime and tms_cstime values in a struct tms as returned by times(2)).

    Note: some shells (e.g., bash(1)) have a built-in time command that provides less functionality than the command described here. To access the real command, you may need to specify its pathname (something like /usr/bin/time).  

    OPTIONS

    -p
    When in the POSIX locale, use the precise traditional format
    "real %f\nuser %f\nsys %f\n"
    (with numbers in seconds) where the number of decimals in the output for %f is unspecified but is sufficient to express the clock tick accuracy, and at least one.
     

    EXIT STATUS

    If command was invoked, the exit status is that of command. Otherwise it is 127 if command could not be found, 126 if it could be found but could not be invoked, and some other non-zero value (1-125) if something else went wrong.  

    ENVIRONMENT

    The variables LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, LC_NUMERIC, NLSPATH, and PATH are used. The last one to search for command. The remaining ones for the text and formatting of the output.  

    GNU VERSION

    Below a description of the GNU 1.7 version of time. Disregarding the name of the utility, GNU makes it output lots of useful information, not only about time used, but also on other resources like memory, I/O and IPC calls (where available). The output is formatted using a format string that can be specified using the -f option or the TIME environment variable.

    The default format string is:

    %Uuser %Ssystem %Eelapsed %PCPU (%Xtext+%Ddata %Mmax)k
    %Iinputs+%Ooutputs (%Fmajor+%Rminor)pagefaults %Wswaps

    When the -p option is given the (portable) output format

    real %e
    user %U
    sys %S

    is used.  

    The format string

    The format is interpreted in the usual printf-like way. Ordinary characters are directly copied, tab, newline and backslash are escaped using \t, \n and \\, a percent sign is represented by %%, and otherwise % indicates a conversion. The program time will always add a trailing newline itself. The conversions follow. All of those used by tcsh(1) are supported.

    Time

    %E
    Elapsed real time (in [hours:]minutes:seconds).
    %e
    (Not in tcsh.) Elapsed real time (in seconds).
    %S
    Total number of CPU-seconds that the process spent in kernel mode.
    %U
    Total number of CPU-seconds that the process spent in user mode.
    %P
    Percentage of the CPU that this job got, computed as (%U + %S) / %E.

    Memory

    %M
    Maximum resident set size of the process during its lifetime, in Kbytes.
    %t
    (Not in tcsh.) Average resident set size of the process, in Kbytes.
    %K
    Average total (data+stack+text) memory use of the process, in Kbytes.
    %D
    Average size of the process's unshared data area, in Kbytes.
    %p
    (Not in tcsh.) Average size of the process's unshared stack space, in Kbytes.
    %X
    Average size of the process's shared text space, in Kbytes.
    %Z
    (Not in tcsh.) System's page size, in bytes. This is a per-system constant, but varies between systems.
    %F
    Number of major page faults that occurred while the process was running. These are faults where the page has to be read in from disk.
    %R
    Number of minor, or recoverable, page faults. These are faults for pages that are not valid but which have not yet been claimed by other virtual pages. Thus the data in the page is still valid but the system tables must be updated.
    %W
    Number of times the process was swapped out of main memory.
    %c
    Number of times the process was context-switched involuntarily (because the time slice expired).
    %w
    Number of waits: times that the program was context-switched voluntarily, for instance while waiting for an I/O operation to complete.

    I/O

    %I
    Number of file system inputs by the process.
    %O
    Number of file system outputs by the process.
    %r
    Number of socket messages received by the process.
    %s
    Number of socket messages sent by the process.
    %k
    Number of signals delivered to the process.
    %C
    (Not in tcsh.) Name and command-line arguments of the command being timed.
    %x
    (Not in tcsh.) Exit status of the command.
     

    GNU Options

    -f FORMAT, --format=FORMAT
    Specify output format, possibly overriding the format specified in the environment variable TIME.
    -p, --portability
    Use the portable output format.
    -o FILE, --output=FILE
    Do not send the results to stderr, but overwrite the specified file.
    -a, --append
    (Used together with -o.) Do not overwrite but append.
    -v, --verbose
    Give very verbose output about all the program knows about.
     

    GNU Standard Options

    --help
    Print a usage message on standard output and exit successfully.
    -V, --version
    Print version information on standard output, then exit successfully.
    --
    Terminate option list.
     

    BUGS

    Not all resources are measured by all versions of Unix, so some of the values might be reported as zero. The present selection was mostly inspired by the data provided by 4.2 or 4.3BSD.

    GNU time version 1.7 is not yet localized. Thus, it does not implement the POSIX requirements.

    The environment variable TIME was badly chosen. It is not unusual for systems like autoconf(1) or make(1) to use environment variables with the name of a utility to override the utility to be used. Uses like MORE or TIME for options to programs (instead of program pathnames) tend to lead to difficulties.

    It seems unfortunate that -o overwrites instead of appends. (That is, the -a option should be the default.)

    Mail suggestions and bug reports for GNU time to
    bug-utils@prep.ai.mit.edu
    Please include the version of time, which you can get by running
    time --version
    and the operating system and C compiler you used.  

    SEE ALSO

    tcsh(1), times(2), wait3(2)  

    COLOPHON

    This page is part of release 3.14 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    EXIT STATUS
    ENVIRONMENT
    GNU VERSION
    The format string
    GNU Options
    GNU Standard Options
    BUGS
    SEE ALSO
    COLOPHON


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру